summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-08superio/fintek/f71869ad: Make hwm devicetree configurableEdward O'Callaghan
Provision the configuration of the Fintek F71869AD Hardware Monitor's configuration by way of devicetree.cb. Make use of this in the jetway/nf81-t56n-lf board to properly control fan's. Change-Id: Ic25b29d1b7a9145e0e209b490b25a2cbc46cb75c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5580 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-08superio/fintek/f71869ad: Configure multi-func reg in devicetreeEdward O'Callaghan
Facilitate for the configuration of so called "Multi-function Select Registers" with devicetree.cb in ramstage. Make use of this new functionality in, mainboard/jetway/nf81-t56n-lf to correctly configure the Fintek's multiplexed GPIO pins to be in AMD TSI mode. This allows the Fintek to correctly talk to the Southbridge over the SMBus for CPU temperature data as to control fans and so on. Change-Id: I80abcd8b767fc4b22d00d1384ce4ef89fe837e3d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5576 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08mainboard/jetway/nf81-t56n-lf: Improve diags in romstageEdward O'Callaghan
romstage reports a completely unintelligible printf of "error level:", fix this and document meaning of the return values in source. Change-Id: Ia2fb9a6206e08822f6c2f62b69bf22cdae2ba819 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5465 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-08rambi: Make ec_in_rw a legacy GPIOShawn Nematbakhsh
ec_in_rw needs to be read by depthcharge, which only supports legacy GPIOs. BUG=chrome-os-partner:24408 TEST=Manual on Rambi. Cold + warm boot device, verify that depthcharge detects the proper ec_in_ro state. BRANCH=None Change-Id: I25802b445c795eb85580c22d880efee8eeb21318 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179228 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4993 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-05-08baytrail: gpio: Make GPIO inputs MMIO by defaultShawn Nematbakhsh
The Linux kernel driver cannot handle Baytrail legacy GPIOs, so make the default input GPIO type MMIO. BUG=chrome-os-partner:24408 TEST=Manual on Rambi. Run "echo 169 > /sys/class/gpio/export; cat /sys/class/gpio/gpio169/value", verify GPIO value changes based upon mic jack status. BRANCH=None Change-Id: I27870ce8b7ecae9228e06e48c8759409c824c2eb Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/179169 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4992 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08rambi: Change eMMC pin PUs to 2KShawn Nematbakhsh
Strengthen PUs on all eMMC pins to fix problems with eMMC not coming up on certain boards. BUG=chrome-os-partner:24353 TEST=Manual. Burn FW on board that previously failed to boot eMMC, verify chromeos can now install + boot from eMMC. BRANCH=none Change-Id: I7a9742968b8b8c2c42285ffc21de46aed9c87fb7 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178917 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4991 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08rambi: configure SD card signalsAaron Durbin
Rambi 1.5 boards use the native SD card controller on baytrail. Therefore, enable those signals. The CLK, D*, and CMD pins use 2K pulls as these were shown to not exhibit any errors when doing reads or writes to a DDR50 sd card. Note that if a servo is connected on needs to enable the sd_vref_sel rail to pp1800 as this causes issues with card detect if it is not set to pp1800. BUG=chrome-os-partner:24312 BRANCH=None TEST=Built and booted. Tested sd card read and write works in kernel. Also noted that write protect detection works as well. Change-Id: I520e2808acbd8494534fcb710411dbc0e12fc874 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178961 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4990 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08baytrail: enable lpe resources assigned to deviceAaron Durbin
The enable_resources callback was accidentally populated with NULL. Make that callback be the generic pci_dev_enable_resources. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted. Change-Id: I670b51bd9aff6764e9b549287a737b662572cdc7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178960 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4989 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08baytrail: Fix _CRS to build with new IASLDuncan Laurie
The new IASL is complaining about the PCI memory region not having consistent base/end/length values because they are placeholder that are fixed up in the method before returning. Put in some more valid placeholder values to make it happy. BUG=chromium:311294 BRANCH=none TEST=build and boot with IASL 20130117 on rambi Change-Id: I0e21adcce43deb14d3c2c45787ff8c9efc357c2f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178864 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Duncan Laurie <dlaurie@google.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4988 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08rambi: configure the LPE audio codec clockAaron Durbin
Rambi has the LPE audio codec connected to PMC_PLT_CLK[0]. Configure it for 25MHz. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted. Noted message in console output. Change-Id: I11297ba951149e5831c65ca70ac7bdbbed113098 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178781 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4987 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-08baytrail: add lpe codec clock configurationAaron Durbin
Add device tree option to determine if the LPE audio codec has a platform clock signal connected to it from the SoC. If a frequency is selected the platform clock number is used to enable the clock. BUG=chrome-os-partner:23791 BRANCH=None TEST=Built and booted rambi with 25MHz option. Probed pin to audio codec. Noted 25MHz clock. Change-Id: I67d0d034f30ae1c7ee8269c0aea43e8c92ff868c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178780 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4986 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08baytrail: Add ACPI code to describe GPIO controllerDuncan Laurie
There are 3 banks of GPIOs that need to be described with specific _UID and memory/interrupt values. BUG=chrome-os-partner:24314 BRANCH=none TEST=build and boot on rambi, check for probed driver: gpiochip_find_base: found new base at 154 gpiochip_add: registered GPIOs 154 to 255 on device: INT33FC:00 gpiochip_find_base: found new base at 126 gpiochip_add: registered GPIOs 126 to 153 on device: INT33FC:01 gpiochip_find_base: found new base at 82 gpiochip_add: registered GPIOs 82 to 125 on device: INT33FC:02 fed0c000-fed0cfff : INT33FC:00 fed0c000-fed0cfff : INT33FC:00 fed0d000-fed0dfff : INT33FC:01 fed0d000-fed0dfff : INT33FC:01 fed0e000-fed0efff : INT33FC:02 fed0e000-fed0efff : INT33FC:02 Change-Id: I9619e2af4e1ccdf3d7b2e4ae280aadf22e278aeb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178601 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4985 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-08baytrail: Update to microcode 31E and fix C-state tableDuncan Laurie
With microcode 31E MWAIT 0x51 is now C6NS and 0x52 is now C6FS. BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi, check that C1/C2/C3 are all used now Change-Id: I8528d808f4082c85d90e2b57747d9f2e2d982b85 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178461 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4984 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-07baytrail: minor stylePatrick Georgi
use IS_ENABLED() over #if brackets Change-Id: I101f99971c0f7b5311ef19cc9832713ab0696935 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5692 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-07rambi: Remove outdated commentPatrick Georgi
Change-Id: Ic555d23a9112677a784dd814601f8202d4d17261 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5691 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-05-07rambi: handle single channel configsAaron Durbin
Some 1.5 boards have a single channel ram configuration. Accomodate such configs. BUG=chrome-os-partner:22865 BRANCH=None TEST=Built and booted ChromeOS. Change-Id: I513327e47b9211d2dd1ea960d7da671a3773cb91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178340 Reviewed-by: Nick Sanders <nsanders@chromium.org> Tested-by: Bernie Thompson <bhthompson@chromium.org> Tested-by: Nick Sanders <nsanders@chromium.org> Reviewed-on: http://review.coreboot.org/4983 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: romstage: Add config option to enable RMTShawn Nematbakhsh
Add config option to enable RMT in the MRC. BUG=chrome-os-partner:21807 TEST=Manual. Build w/ "USE=rmt", verify RMT print seen on FW console. Build w/o USE flag, verify no RMT print. BRANCH=None. CQ-DEPEND=CL:*148655 Change-Id: Ibd3da87317a3359e797d9b43bc437e7227a85048 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/178095 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4982 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: pcie: Root port initializationAaron Durbin
Add PCIe driver to initialize root ports. BUG=chrome-os-partner:24111 TEST=Manual on Rambi. Verify that PCIe Wifi card is detected and able to detect networks. BRANCH=None. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: I3c68da5f27cd162e112add488bdf5ced192b7d12 Reviewed-on: https://chromium-review.googlesource.com/177652 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4981 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: gpio: Fix NCORE gpio-to-pad LUTShawn Nematbakhsh
NCORE pad addresses were wildly wrong due to documentation bugs. BUG=chrome-os-partner:24179 TEST=Manual on Rambi. Verify display isn't always on. Verify brightness control now works in Chrome OS. BRANCH=None. Change-Id: I464436a58baa4957329c11231c5a866dafd97ce8 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177597 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4980 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: use SERIRQ pad as keyboard irq in gpio modeAaron Durbin
The level shifting between 3.3V and 1.8V for the SERIRQ signal is not working. Instead use the SERIRQ pad as a gpio which is used as a direct IRQ signal for the keyboard interupt. BUG=chrome-os-partner:23965 BRANCH=None TEST=Built and booted rambi. Keyboard works with associated EC change. CQ-DEPEND=CL:177189 Change-Id: Ifc270ca38207828a6d4711551d4bde9121559cca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177223 Tested-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4979 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: make ramids non-legacy gpio inputsAaron Durbin
The romstage code for rambi uses the mmio way of reading inputs. However, this is a problem is the GPIOs are set up as legacy mode. Subsequent warm resets mean the ram_id is read incorrectly. Ensure the ram_id is read consistently by keeping the GPIOs for ram_id in mmio mode. BUG=chrome-os-partner:24085 BRANCH=None TEST=Built and booted. And rebooted. Now seeing consistent ram_id values on warm resets. Change-Id: Ieff98c000be80998854f325754f1e819975d2be5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177230 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: enable caching and prefetching in spi controllerAaron Durbin
The default mode of the SPI controller has prefetching disabled. That obviously has a performance impact. Enable both caching and prefetching to make booting faster. This has a significant impact on streaming data out of SPI. BUG=chrome-os-partner:24085 BRANCH=None TEST=Built and booted rambi. Payload loading step went from ~285ms to ~54ms. Change-Id: I065cf44e1de7dcefc49aa9ea9ad0204929ab26f4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/177220 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4976 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: fix direct irq pad configurationAaron Durbin
When a pad is configured for direct IRQ it needs to be in non-legacy. Additionally, the signal is passed directly to the APIC by setting the LEVEL and TPE bits in the pad config register. The APIC can then be configured for level, edge, and rising/falling. BUG=chrome-os-partner:24037 BUG=chrome-os-partner:22863 BRANCH=None TEST=Built and booted with this config. Trackpad is firing interrupts more than it should, but it appears to be a trackpad firmware and/or configuration issue. Change-Id: I00042b2ddba67d6bf23f0e7468d0719196e6f865 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176793 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4975 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: ensure init_chromeos() is called in romstageAaron Durbin
The TPM needs to have the TPM_Startup command sent to it on all boot paths. The call init_chromeos() in romstage_common() fulfills this requirement. BUG=chrome-os-partner:24057 BRANCH=None TEST=Built and booted. Was able to suspend to ram multiple times in a row. Change-Id: Id0339a9d82897249d20ff5f62d2dcb8b535310fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176803 Reviewed-by: Todd Broch <tbroch@chromium.org> Tested-by: Todd Broch <tbroch@chromium.org> Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-07rambi: distribute IRQs away from PIRQA on pci devicesAaron Durbin
Some of the drivers in the kernel were not so happy about having shared IRQs. Also, sharing IRQs means more code needs to be run in interrupt context to determine if the IRQ was meant for a particular device. Fix this. No more 'mmc1: got irq while runtime suspended' messages. BUG=chrome-os-partner:24056 BRANCH=None TEST=Built and booted. Looked at /proc/interrupts and noted no more sharing between pci devices. Change-Id: Ie5da102204ffe3156dd55ab17af77df245a57c97 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176792 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4973 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07superio/common/conf_mode: Provide another common pnp entry/exitEdward O'Callaghan
ITE Super I/O's make use of this method to enter and exit in and out of their PNP configuration. Provide functions for use in ram stage component. Change-Id: I2b546c2b17eefc89aaab4982192f5e9a15a16c2f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5666 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-05-07kconfig: update to follow upstream more closelyPatrick Georgi
This might break a bunch of stuff (eg. win32 support), but otherwise introduces nconfig (ncurses based configuration frontend), partial configuration headers for improved dependency tracking (which requires some more build system support) and various bug fixes. Change-Id: I5d8a280810c6a26fc3fd056d5d94cb9e591a0ff5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/5487 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-05-07baytrail: don't allow PCIE wake upsAaron Durbin
The PCIe subsystem was constantly waking up boards from S3 and S5. Completely disable PCIe wake ups. It can be made mainboard-configurable later if needed. BUG=chrome-os-partner:24004 BRANCH=None TEST=Both S3 and EC RW->RW update (trip through S5) don't cause wakeups. Change-Id: I922e2947c4b6e29277d913f06192601a2954f8fe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176791 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4972 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: gpio: Make pad input/output state mutually exclusiveShawn Nematbakhsh
Previously pads were being configured as both input and output simultaneously due to the config bits being active low. Create new defines that only enable either input or output, and use them in our GPIO configs. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Verify system boots and peripherals still function. BRANCH=None. Change-Id: If386682a3d810864b7b9f5d2aecdb2e6cfceea86 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176725 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4971 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: fixup settings so trackpad can be found in kernelAaron Durbin
The kernel chromeos_laptop driver nomenclature expects the board name to not be in all caps. Fix this as well as the i2c address for the trackpad. BUG=chrome-os-partner:24307 BRANCH=None TEST=Built and booted. trackpad device is found. IRQs still not working yet. Change-Id: Id6be8ee4bce2835e303ea4fe63944be80d2d7ec2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176680 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4970 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: first pass at lpss device initializationAaron Durbin
This commit does the common parts for all LPSS devices that are enabled: enable snoop in IOSF and enable power management. Additionally, the i2c devices are taken out of reset. BUG=chrome-os-partner:23790 BRANCH=None TEST=Built and booted with modified kernel-next. I2C bus devices show up and I see 0x10 on one of the buses. Change-Id: I540caea6a8666f5684dc5cee683a6b085dfac6de Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176424 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4969 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07reg_script: add iosf lpss port accessAaron Durbin
Add the LPSS IOSF port access to reg_script. This is going to be used by baytrail. BUG=chrome-os-partner:23790 BRANCH=None TEST=Buit. Change-Id: I0367acdb584f2de0bb871b136042b57fe6b7ec90 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176423 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4968 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: initialize eMMC deviceAaron Durbin
The eMMC device is initialized as version 4.5 with HS200 speeds. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built and booted rambi to login screen off of eMMC device. Change-Id: I686c6136005fcb2587b939ddea293f4398df9868 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176536 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4967 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: initialize common SSC functionalityAaron Durbin
The SSC (storage control cluster) houses the SD, SDIO, and eMMC interfaces. The scc cofniguration function, baytrail_init_scc(), is ran in the pre device stage to initialize the SCC. The eMMC is expected to be configured for version 4.5. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built and booted with some other eMMC changes into login screen off of eMMC device. Change-Id: I81cc755a790b7e43ad234a8201dae480277202c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176535 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4966 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07reg_script: add iosf paths for score, ccu, and sscAaron Durbin
Handle SCORE, CCU, and SSC IOSF accesses. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built. Change-Id: I6e678eb79bd1451f156bdd14cf46d3378dc527c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176534 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4965 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07baytrail: add score and ssc iosf access functionsAaron Durbin
The SCORE allows controlling the pad configuration while the SSC handles the configuration for the storage control cluster. BUG=chrome-os-partner:23966 BRANCH=None TEST=Built. Change-Id: Ifd9f67a4e88d5bb99faec6ceeb3e263001a87c41 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176533 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4964 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-07rambi: Add DIRQs for trackpad and touchscreenShawn Nematbakhsh
Also add the relevant info about these pins to the ASL tables + add SMBIOS type 41 data for these parts. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ regwrites w/ GPIO_DEBUG look correct. Change-Id: Id40655f9fb2ea7b10e1ff58d0b2a8b4cc6f05ff8 Reviewed-on: https://chromium-review.googlesource.com/176299 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-06Introduce stage-specific architecture for corebootFurquan Shaikh
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-06baytrail: gpio: Add support for direct / dedicated IRQsShawn Nematbakhsh
Add support for DirectIRQ / dedicated IRQs. This consists of up to 16 IRQs for both SCORE and SSUS banks. BUG=chrome-os-partner:22863 TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ regwrites w/ GPIO_DEBUG look correct. Change-Id: I4b0dc6e7ae86c9f554b6e78792239234f702764c Reviewed-on: https://chromium-review.googlesource.com/176165 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4962 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: disable HDA deviceAaron Durbin
For some reason HDA can now be disabled. It's unclear what changes in the baytrail code allowed this to happen, sadly. BUG=chrome-os-partner:22871 BRANCH=None TEST=Noted hda is not in lspci. Change-Id: I64e2560533be6f701fa66cd53c906b62b09012ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176394 Reviewed-on: http://review.coreboot.org/4961 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: enable SCI and SMI gpiosAaron Durbin
Rambi has 3 pins that need to be configured for SCI and SMI: 1. GPIO_CORE[0] - runtime SCI pin 2. GPIO_SUS[7] - SMI for firmware lid events 3. GPIO_SUS[0] - wake pin for S3 wakes from EC. Configure these pins now that the rest of the infrastructure is in place. The one thing that is yet to work is runtime SCI for lid events once booted. BUG=chrome-os-partner:23505 BRANCH=None TEST=built and booted. lid close at rec screen works. And wake from S3 with a keyboard press works. Change-Id: I5f8e38ec5f4cf1a8ef7aa7fcee9abc344d9b184f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176393 Reviewed-on: http://review.coreboot.org/4960 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06rambi: mainboard EC - SCI and SMI fixesAaron Durbin
As rambi is a baytrail board it doesn't have a dedicated wake pin. Therefore, one needs to enable the proper GPIO to wake up the sytem before going into S3. BUG=chrome-os-partner:23505 BRANCH=None TEST=Put system into S3. Keyboard press created wake event. Also, typed 'lidclose' on EC console while at recovery screen. Machine properly shutdown. Change-Id: Ic67b6bce93d57c620f498505d83197e4ae34a07d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176392 Reviewed-on: http://review.coreboot.org/4959 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add GPIO SMI supportAaron Durbin
GPIOs which trigger SMIs only set the status bits in the ALT_GPIO_SMI regier. No bits in the SMI_STS register are set. Therefore, the ALT_GPIO_SMI register needs to be read and cleared on every SMI. Additionally, the mainboard_gpi_smi() handler needs to be called as well on every SMI because of this property. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted to recovery screen. Typed 'lidclose' on EC console. SMI occurred which caused the board to be shutdown. Change-Id: Ic204d8b928a0cb4f51f108a649f374d9f94e4f47 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176391 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4958 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: add support for routing gpio pins to smi/sciAaron Durbin
In order for gpio pins to trigger an smi/sci the GPIO_ROUT register needs to be set accordingly. For SMI, the ALT_GPIO_SMI register needs to be enabled for each gpio as well. The first 8 gpios from the suspend and core well are the only gpios that can trigger an SMI or SCI. The settings for the GPIO_ROUT and ALT_GPIO_SMI register are not commited until the SMM settings are enabled in the southcluster. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Manually triggered SCI by changing GPE0a_EN and toggling PCH_WAKE_L on the EC console. Change-Id: Id79b70084edc39fc047475e984494c224bd75d6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176390 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4957 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: fix fadt structure for gpe0 blockAaron Durbin
The gpe0 block's size was being misreported. Correct the gpe0 size and use make the FADT fields be more robust instead instead of hand calculating fields that are the based on the same size. This change correctly enables GPE events in the kernel. Confirmed this by using iotools read the gpe_cnt register. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted. Confirmed EC's GPE event is enabled (but still not working). Change-Id: I415710f7fec2e95cecee3bf679ee673dacc27480 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176271 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4956 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Add microcode/punit release 31aDuncan Laurie
BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi Change-Id: I89c25142245cd268f755210784fd9d0c60dc5661 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176305 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Tested-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4955 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Add ACPI CPU entriesDuncan Laurie
- C-state table based on static config MWAIT values are from ref code for non-S0ix config C6 substate 8 is ignored by the kernel as it violates the CPUID but it is left in as the other substate may not work. - P-state table generated with proper ratio and VID values relies on having the package power msr set to magic value as the power-on default is wrong - T-state table uses static table BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: I7c997e58cb3a71d0ec413b17f0c5467bef4bf62c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175742 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4954 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Add BCLK and IACORE to pattrsDuncan Laurie
The bus clock speed is needed when building ACPI P-state tables so extract that function and have the value be saved in pattrs. The various IACORE values are also needed, but rather than have the ACPI code to the bit manipulation have the pattrs store an array of the possible values for it to use directly. BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi Change-Id: I5ac06ccf66e9109186dd01342dbb6ccdd334ca69 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176140 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4953 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06baytrail: Enable Turbo/Burst and set some magic MSRsDuncan Laurie
As far as I can tell turbo enabling behaves like it did on haswell so use the standard code. There are also some magic values to set in some magic MSRs related to turbo and package power so they report correctly. The L2 cache shrink is enabled and a threshold is set that makes both dual and quad core happy. C1E is disabled to match the reference code. BUG=chrome-os-partner:23505 BRANCH=rambi TEST=build and boot on rambi Change-Id: Ic6d4283d480a44d85a9b96571baf83928615665c Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175743 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4952 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-06regscript: Add support for MSR typeDuncan Laurie
This required changing value/mask types to uint64_t. Another option would be to use id field to select low or high 32 bits of the MSR and set them independently. BUG=chrome-os-partner:23505 BRANCH=none TEST=build and boot on rambi Change-Id: Ied9998058a8035bf3f003185236f3be3e0df7fc9 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176304 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4951 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 13:42:40 +0000