summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-08security/vboot: Split fwid.region build targetRaul E Rangel
Add the ability to specify the fwid version via a file instead of via config. This makes it so when doing an incremental build all objects are not invalidated when bumping the fwid. The coreboot ebuild will create this file to pass the latest version. BUG=b:112267918 TEST=ran dmidecide -t 0 and verified version was present Change-Id: I955106efd648a75a1311f24ede46bd238d1517e0 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-08mainboard/google/kahlee: Set SYSTEM_TYPE_LAPTOPRaul E Rangel
This configures the ACPI FADT perferred power management profile to PM_MOBILE instead of PM_DESKTOP. I'm not sure what impact this actually has. I just noticed the other boards have it set. BUG=b:110971913 TEST=Made sure SYSTEM_TYPE_LAPTOP shows up in coreboot.config Change-Id: Iea1b8359b80d167e69745358f543f025713294ba Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08soc/amd/stoneyridge: Prevent reboot in romstageRaul E Rangel
By setting this register in bootblock AmdInitEnv will no longer trigger a reset in romstage. This fixes a few vboot test failures and also speeds up boot time. BUG=b:111610455 TEST=Built grunt and made sure bootblock only happens once on cold boot, and S3 resume. Change-Id: Ie19f7a14deaef45ac63156bec6946273c1b9447e Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08amd/stoneyridge: Dump MCA registersMarshall Dawson
Add a function to provide a rudimentary dump of the Machine Check Architecture registers. These values survive a warm reset. BUG=b:65445599 TEST=Verify on a Grunt having propensity for #MC errors Change-Id: Ib6875cabe3041e65c811d8b2232f7ac6bedd1a02 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08amd/fam15: Add MCA bank register definitionsMarshall Dawson
Define the additional registers used for each Machine Check Architecture bank. Change-Id: I962f23662789a3b974f4946555f67fcfc6147df8 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08amd/stoneyridge: Add warm reset detectionMarshall Dawson
Extend the existing reset handling features in Stoney Ridge to plan for, and recognize, warm resets. The ColdRstDet bit is always zero on a cold reset, and is intended as a mechanism for the BIOS to determine the type of a reset that occurred. Set ColdRstDet=1 after all cores have been initialized, so that any subsequent reset may be identified as warm/cold. A later patch will check the value during mp_init. Change-Id: I90255918de03018c9f090bff1e56a8bda5e7365e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08cpu/amd: Correct number of MCA banks clearedMarshall Dawson
Use the value discovered in the MCG_CAP[Count] for the number of MCA status registers to clear. The generations should have the following number of banks: * Family 10h: 6 banks * Family 12h: 6 * Family 14h: 6 * Family 15h: 7 * Family 16h: 6 Change-Id: I0fc6d127a200b10fd484e051d84353cc61b27a41 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08cpu/amd: Improve formattingMarshall Dawson
Remove for() braces from around single lines. Remove extra blank lines. This cleans up checkpatch problems in a subsequent patch. Change-Id: I329ac03365e51799581c56eed27ee54de6826f14 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08cpu/amd: Rename MCA status registerMarshall Dawson
Change the defined name of MCI_STATUS (i.e. MCi_STATUS) to reflect its MC0_STATUS address. Change-Id: I97d2631a186965bb8b18f544ed9648b3a71f5fb0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-08ec/google/chromeec: add support for retrieving DRAM part numberAaron Durbin
The DRAM part number can be stored in the CBI data. Therefore, add support for fetching the DRAM part number from CBI. BUG=b:112203105 TEST=Fetched data from CBI on phaser during testing. Change-Id: Ia721c01aab5848ff36e11792adf9c494aa25c01d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-08soc/intel/apollolake: add new dimm info saving APIAaron Durbin
The current call for saving dimm info passed the lpddr4_cfg and memory sku id. In order to prepare decoupling the part number from lpddr4_cfg provide a new API, save_lpddr4_dimm_info_part_num(), which explicitly takes the part number. The previous API now uses the new one internally. BUG=b:112203105 Change-Id: Ieadf452b6daa3231a0c5e3be61b0603b40d0fff2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-08soc/intel/apollolake: Add support for LPDDR4 nWR settingRavi Sarawadi
nWR (Write-Recovery for AutoPre-charge commands), the programmed value of nWR is the number of clock cycles the LPDDR4-SDRAM device uses to determine the starting point of an internal Pre-charge operation after a Write burst with AP (auto-pre-charge) enabled. For >2133MHz speed parts the nWR needs to be set to 24 clock cycles. The nWR field, though, is only in the GLK FSP, so just update that field conditionally based on the GLK Kconfig option. BUG=b:112062440 TEST= build test Change-Id: I1147538f72f4e2f14e32f3657c05f1f505a56fbf Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-08soc/amd/stoneyridge/acpi.c: Remove fixed value variablesRichard Spiegel
In procedure generate_cpu_entries(), the code was copied from code that could change variables "plen" and "pcontrol_blk" based on number of cores. This is not the case with stoneyridge (2 cores only), and there's no need to use the variables. Remove them and replace with fixed values. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I0258b19960b050e8da9d218ded3f1f3bfccad163 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27877 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-08device/pci_device.c: Remove unused variable attr settingRichard Spiegel
In procedure pci_get_resource, when setting an IO mapped base address, variable attr is &= with PCI_BASE_ADDRESS_IO_ATTR_MASK. However, in this particular code flow variable attr is not used later. Remove the line. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: Ia4fdda1be92d22017a7a913a911db15aaa440b69 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08lib/bootmem.c: Remove unused setting of variable "begin"Richard Spiegel
The variable "begin" is extracted from the structure, but 4 lines below it's overwritten with "end - size". This causes a static build scan error that should be fixed. Remove the initial assignment of variable "begin". BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I0a265747e61289f045c5cac09e40478bd31e16fc Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27886 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-08mb/intel/cannonlake_rvp/devicetree: Remove spurious CPP directivesArthur Heymans
The devicetree is not run through a C pre-processor, so remove it. Change-Id: I161be45b2035f3a8724bf3217260e7571c429da8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27927 Reviewed-by: Naresh Solanki <naresh.solanki.2011@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-08src/soc/intel/common: Configure the gspi chip select state correctlyAamir Bohra
This implementation updates the chip select control register programming in gspi controller setup call to program the correct bit fields for chip select state. Change-Id: Ifab37b0003f09a680024d5b155ab0bb157920a53 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/27889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-07arch: Retire cache_sync_instructions() from <arch/cache.h> (except arm)Julius Werner
cache_sync_instructions() has been superseded by arch_program_segment_loaded() and friends for a while. There are no uses in common code anymore, so let's remove it from <arch/cache.h> for all architectures. arm64 still has an implementation and one reference, but they are not really needed since arch_program_segment_loaded() does the same thing already. Remove them. Leave it in arm(32) since there are several references (including in SoC code) that I don't feel like tracking down and testing right now. Change-Id: I6b776ad49782d981d6f1ef0a0e013812cf408524 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07arm64: Disable MMU during legacy payload handoff (without Arm TF)Julius Werner
coreboot payloads expect to be entered with MMU disabled on arm64. The usual path via Arm TF already does this, so let's align the legacy path (without Secure Monitor) to do the same. Change-Id: I18717e00c905123d53b27a81185b534ba819c7b3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07sdm845: Implement bitbang UART for bootblockJulius Werner
This patch replaces the UART in the bootblock of SDM845 with a bitbang implementation. Since SDM845 hardware UART needs a firmware blob loaded into it before it becomes usable, it is not really suited for use in the bootblock (since by the time we can read blobs from SPI, the bootblock is essentially over anyway). This solution allows us to still have some console output during early SoC initialization. Change-Id: I0c252ec83a7993edce5c4debc687f1fdd0d7b36d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07security/tpm: Check for NULL pointerFurquan Shaikh
Change bce49c2 (security/tpm: Improve TCPA log generation) missed checking for NULL pointer before accessing the tcpa_table returned by tcpa_log_init. This change fixes the boot hang observed on octopus by ensuring pointer is checked for NULL before using it. BUG=b:111403731 TEST=Verified that octopus boots up fine. Change-Id: I2e46197065f8db1dc028a85551546263e60d46b2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07ifdtool: reorder output of JID dumpsStefan Tauner
Change-Id: I109f620bb644c3979ae297bdf544d295cdbac57f Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-07ifdtool: fix flumap handling in chipsets prior ibex peak/5 seriesStefan Tauner
The Upper Map section in the descriptor contains a database of flash chips (VSCC Table). Its offset is located at a fixed offset from the beginning of the image. ifdtool falsely calculates the offset from the descriptor signature which has moved by 16 bytes with step b of the Ibex Peak (5 series) chipset. This produces bogus output for all chipsets older than that. This patch corrects the behavior by calculating the offset of flumap by adding 4096 - 256 - 4 to the start of the image. Change-Id: I14f029fe702c129dfd8069a58fbd41113700f7ef Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-07sb/intel/i82801[ijg]x: remove stale board-specific comments from ich*.aslStefan Tauner
Apparently they were introduced when refining ICH7 support when porting Kontron 986LCD-M and then copied over to ICH9 and 10. Change-Id: I2d9ece608955310d22b79574b9113a1521b2076c Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-07mb/google/poppy/variants/nautilus: Set CABC_EN to GPO high before EDP power onSeunghwan Kim
If GPP_E22(CABC_EN) remained floating GPI(SoC default) at V3.3_DX_EDP on, it may cause damage on the GPIO pad. To prevent, we would set this pad to GPO on romstage before EDP power on. Since we need to cover all systems in market, I put it into romstage instead of early_gpio_table. BUG=b:111860510 BRANCH=poppy TEST=Verified CABC_EN is set to GPO high 5ms before EDP power on Change-Id: I34e2fe86329a88eb05e0ea3c6beac6a64754b41e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-07mb/google/poppy: Add variant callback for romstage GPIO configurationFurquan Shaikh
This change adds variant callback to get GPIO configuration table in romstage and configures these GPIOs before memory training is performed. BUG=b:111860510 BRANCH=poppy Change-Id: I1eb51356fb3f4c0f4ff29b22dbcde6dbece303ad Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07mb/google/poppy/variants/nautilus: Add SKU info to SMBIOSFurquan Shaikh
This change provides implementation of smbios_mainboard_sku() to add proper "skuX" string to SMBIOS table 1. BUG=b:112163362 TEST=Verified "dmidecode -t 1" reports skuX correctly. Change-Id: I7e42d2c80d791ea7170d066d2eeaa0c6811eb9c9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06soc/amd/stoneyridge: Call AMD ALIB method with AC/DC stateMarc Jones
AMD ALIB Function 1 accepts the AC/DC startup state. This is reported to be required for AMD PSPP settings. BUG=b:112020107 TEST= build test Change-Id: Ibb6c872d84745217912956c15d6ca2e8ba387561 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27785 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06mainboard/google/kahlee: Add PSPP override settingMarc Jones
Add default PSPP AGESA setting for Kahlee/Grunt mainboards. BUG=b:112020107 TEST= build test Change-Id: I8a8605402379de88a04f3a16553c308513fa1531 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06google/grunt: Move PSP_SELECTABLE_SMU_FW to socRichard Spiegel
Now that an updated bootloader with important fixes is available at coreboot repository, all stoneyridge boards should use it. Move the selection of SOC_AMD_PSP_SELECTABLE_SMU_FW from mb/google/kahlee to soc/amd/stoneyridge. BUG=b:111428800 TEST=Build and boot grunt. Change-Id: Idf8e348efbc85569aa1163125f412c5242c46eb4 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27844 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06payloads/external/SeaBIOS: add support for sercon portPiotr Król
Change-Id: Id2d2ed0fa97f2cef5818a8508bb8ee3ddba73647 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/26060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-06src/soc/intel: Add AML IGD in platform reportingGaggery Tsai
This patch revises IGD naming and adds AML IGD in platform reporting. BUG=None BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage & Ensure AML IGD is shown in platform reporting. Change-Id: Id8f8379703abdaa5b14a4337a4fca04b370f3a2a Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06soc/intel/skl: Add AML IccMax and remove unused infoGaggery Tsai
This patch adds AML IccMax for VR configuration. From doc #594883, the IccMax for Core was changed to 28A, we need this patch to accommodate the changes. Besides, removes unused sku information from sku_icc_max_mapping structure. BUG=b:110890675 BRANCH=None TEST=Remove icc_max from DT & emerge-atlas coreboot chromeos-bootimage & Tested with AML-Y and KBL-Y SKUs. Change-Id: Ic22bae162b58b06b9519f1b708be55bde5e4641e Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27610 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-06mb/google/octopus/variants/baseboard: Update Power Limit1Sumeet Pawnikar
Update power limit1 value from 8W to 10W. There is an error in the energy calculation for current VR solution on GLK. Experiments show that when power limit1 set to 10W, gained performance improvement with SoC TDP reaches max (6W) power. BUG=b:79779737 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: Ic320d442e7401e4be2e8e16d691db4c803f0fdc1 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06soc/amd/stoneyridge: Enable spread spectrum in bootblockRaul E Rangel
setup_spread_spectrum is called in early_init, meaning the console is not initialized yet. So you won't see boot block booting twice. BUG=b:111610455 TEST=booted grunt and verified that AmdInitReset does not reboot. I had AGESA patched to skip the JTAG check. Change-Id: Ia036ea513ac67d4b8bcf5a78029d969a4ae012a6 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06vendorcode/intel/fsp/fsp2_0/glk: Add nWR config in Odt ConfigKane Chen
From doc 571118, the bit 5 of OdtConfig is nWR config. If the bit 5 is set, MRC will set MR1 nWR field to 24. If the bit 5 is clear, MRC will set MR1 nWR field to 6. Change-Id: Ic8e4e2ffb098c8ba2f670535981e9a30c3d45b64 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/27814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-06exception: Fix segment error code maskRaul E Rangel
The segment error descriptor is actually 13 bits long. BUG=b:109749762 TEST=Verified by causing a segment error Change-Id: I3439f9ce1e8cf0c472c4eb82d74a787718c9609f Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06mb/google/octopus/variants/fleex: Enable Weida touchscreen deviceCrystal Lin
This change adds ACPI properties for WDT8752A device. BUG=b:111402335, b:111102092 BRANCH=master TEST=Verify touchscreen on fleex works with this change Change-Id: Id186d5b87343007ae7e631d5d27464ee27e5b27d Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add rammus devicetree.cbZhuohao Lee
Use the default value for Iccmax which is specified in vr_config.c. The AcLoadline and DcLoadline keep the poppy value. Besides, the USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT and the others on the daughterboard are set to USB2_PORT_LONG. Those setting need to be fine tuned later. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: Icabfac04c94b3d480872c243d811509e274ef122 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add gpio settingZhuohao Lee
The gpio setting is based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I20fc081d372b8686f6128a7e85276f9c6798b199 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add memory configurationZhuohao Lee
Add memory configuration based on the proto board schematics BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I45efdc7893b5bcbca0de6e932e1452cc1a2ff028 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: add audio, mic and codec configurationZhuohao Lee
Rammus uses DA7219 Headset, Maxim MAX98927 Smart Amps and 4 channel dmic BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: If21a3870ee4b000a776d2f3e025fb43ef2fe48c7 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: change build directory to rammusZhuohao Lee
Move the build board directory from poppy to rammus. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I3a9fc2bbfe7261661f0c5c073baff0ff1434d09f Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mp_init: fix typoRaul E Rangel
BUG=none TEST=none Change-Id: Ic2d7bf5f5335894ede98dc7e6cc6a65e4897e487 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06mb/google/kahlee: Disable SATA in all boardsRichard Spiegel
Kahlee based boards don't use SATA, so disable SATA on all boards to save power. BUG=b:112139043 TEST=Build and boot grunt, checked the absence of SATA PCI. Change-Id: I6a12c03a5a95b1c8b40609a3fe656df92548b80b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06soc/amd/stoneyridge: Disable SATA based on devicetree settingRichard Spiegel
Grunt boards don't use SATA, so it should be disabled to save power. Check if SATA is enabled in devicetree, and enable/disable the device based on that setting. BUG=b:112139043 TEST=Buil and boot grunt, checked the absence of SATA PCI. Change-Id: I4a3b5f65e612e8da5bedff0c557a0850f350dfa8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-05southbridge/intel/bd82x6x/Kconfig: Do not include any IFD by defaultAngel Pons
Since only a handful of boards have descriptor blobs in the tree, it makes no sense to have `HAVE_IFD_BIN` enabled by default then disabled on each mainboard. This patch flips the default value of said variable, rendering all current overrides unnecessary. The few boards which have an IFD in the blobs repo use `select HAVE_IFD_BIN` to enable adding the IFD by default. Since `HAVE_ME_BIN` depends on `HAVE_IFD_BIN`, the former has been removed alongside the latter, and has been added to the boards with a ME blob as `select HAVE_ME_BIN`. Both `HAVE_IFD_BIN` and `HAVE_ME_BIN` have been removed from autoport as well. Change-Id: I330c4886f8bea4b1a8ecad6505a0e5cc381654d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04x4x/raminit_ddr23: use MCHBAR AND/OR/AND_OR macros [2/2]Felix Held
This patch contains the parts that changed the hash of the generated binary; probably due to the compiler optimizing things slightly different. Change-Id: I3233ba1747dcf5ad05b2ad771a86e3936f655d1c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: remove read_mchbar functionsFelix Held
Change-Id: I7935cc166aa39f4053f45eef925d92ce50fd98ba Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: clean up code and remove write_mchbar functionsFelix Held
This part of the cleanup patches changes the hash of the output binary; likely due to the compiler optimizing things differently. Change-Id: I1a22f6216a75e2b463d4e169e97ad6e0bbaafae8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27708 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 08:56:43 +0000