summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-01mb/google/octopus/variants/bobba: Disable XHCI LFPS power managementSheng-Liang Pan
LTE module is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ib8e5ae79e097debf0c75ead232ddbb2baced2a2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/40303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-05-01mb/google/volteer/malefor: Enable touch screenWilliam Wei
Enable Goodix touch screen and ensure it works properly. BUG=b:154191288 TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the Goodix touch screen function. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: I236ac56dd0a1817092151bae93e699115ba88e4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40598 Reviewed-by: Alex Levin <levinale@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01vc/eltan/security/verified_boot/vboot_check.c: Increase wb_buffer sizeFrans Hendriks
Running commit aee0baf0690681fae85d24e6887d6cbb9209de83 on Facebook fbg1701 results in an error: VB2:vb2_rsa_verify_digest() ERROR - vboot2 work buffer too small! ERROR: HASH table verification failed! The actual vboot structures require more space. Workbuffer size needs to be increased. We didn't determine the commit causing the issue because this change fixes the issue. BUG=N/A TEST=Build and boot Facebook fbg1701 Change-Id: I5caebc643eb493f4285c2f2fc164ff3a5d35e24e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-01tests: Add device/i2c-test test caseJan Dabros
Add unit test for src/device/i2c.c module. This patch is also used as an example for incorporating Cmocka mocking feature (-wrap linker flag). Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: I2eeb565aacc724ae3b9f5c76ef4b98ef695416d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-05-01tests: Add lib/string-test test caseJan Dabros
Show a basic example of how unit testing can be applied for the coreboot project. Add a test harness for lib/string.c module. TEST=Install cmocka via appropriate command: sudo apt-get install -y libcmocka-dev sudo emerge dev-util/cmocka yum install libcmocka-devel * Build and run unit tests via `make unit-tests` * Check the output to see that tests passed. Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: Ibf5554d1e99a393721a66bdd35af0122c2e412c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-05-01tests: Add build subsystem for unit testing corebootJan Dabros
Add a subsystem which will be used for writing, building and running unit tests for different coreboot's modules. This work is built using Cmocka unit testing framework. Description of what unit testing means (for the author) and how unit testing framework evaluation was performed may be found in Documentation/technotes/2020-03-unit-testing-coreboot.md Makefiles structure is very similar to this used for building coreboot images. Every directory has its own Makefile.inc were tests' names, sources, subdirs and multiple other test-related attributes are defined in form of variables. Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: I9b0220b84b9a6e448476ca3eb3ccccc5fb829ad1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-01Documentation: Add proposal for firmware unit testingJan Dabros
Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: I552d6c3373219978b8e5fd4304f993d920425431 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-01soc/amd/common/block/graphics/graphics: Add missing const to fill_ssdtRaul E Rangel
BUG=none TEST=Made sure trembyle builds Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9df70fd5c41a9a68edc7be3c2e920c4dc94d5af9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40871 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/purism/librem_skl: Use ACPI backlight controlsBenjamin Doron
Enables ACPI backlight controls. Change-Id: Iccf50f427b7555ee1a3ef9cc11a89d532789ac54 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-05-01soc/amd/picasso: Enable cache in bootblockFelix Held
Unlike prior AMD devices, picasso cannot rely on the cache-as-RAM setup code to properly enable MTRRs. Add that capability to the bootblock_c_entry() function. In addition, enable an MTRR to cache (WP) the flash boot device and another for WB of the non-XIP bootblock running in DRAM. BUG=b:147042464 TEST=Boot trembyle to payload and make sure bootblock isn't abnormally slow. Change-Id: I5615ff60ca196e622a939b46276a4a0940076ebe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38691 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01security/vboot: Convert reboot-related errors to vboot2-styleYu-Ping Wu
Error codes are renamed as follows: VBERROR_SHUTDOWN_REQUESTED --> VB2_REQUEST_SHUTDOWN VBERROR_REBOOT_REQUIRED --> VB2_REQUEST_REBOOT VBERROR_EC_REBOOT_TO_SWITCH_RW --> VB2_REQUEST_REBOOT_EC_SWITCH_RW VBERROR_EC_REBOOT_TO_RO_REQUIRED --> VB2_REQUEST_REBOOT_EC_TO_RO BRANCH=none BUG=b:124141368, chromium:988410 TEST=emerge-nami coreboot Cq-Depend: chromium:2143030 Change-Id: Id82cf85f49dfb63a9c3d41aacd3969786bffcac7 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40749 Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01Update vboot submodule to upstream masterYu-Ping Wu
Updating from commit id 55154620: vboot: Add screens for recovery using disk to commit id 3aab3014: vboot: Convert reboot-related errors to vboot2-style This brings in 3 new commits. Change-Id: I75be535e0b0f8080366b98e5ae2007452ad51738 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40845 Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/tigerlake: Fill PcieRpClkReqDetect from devicetreeMeera Ravindranath
This CL adds support to fill PcieRpClkReqDetect UPD from devicetree. Filling this UPD will allow FSP to enable proper clksrc gpio configuration. BUG=None BRANCH=None TEST=Build and boot tglrvp. Change-Id: Iad0ba94fea019623a5b98fff0cb4a2cd1d2a7bd7 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-05-01mb/google/hatch/vr/puff: Add psys_pmax calculationTim Chen
This patch adds psys_pmax calculation. There are two types of power sources. One is barrel jack and the other is USB TYPE-C. The voltage level is fixed for a barrel jack while TYPE-C may vary depending on power ratings. We need to get voltage information from EC and calculate correct psys_pmax value. The psys_pmax needs to be set before FSP-S since FSP-S will handle the setting passing to pcode, so move the routine ahead to variant_ramstage_init. BUG=b:151972149 TEST=emerge-puff coreboot chromeos-bootimage check firmware log and ensure psys_pmax is passed to FSP check the data from dump_intel_rapl_consumption in the OS and ensure the power data is close to an external power meter. Change-Id: Iff767d4b44a01e766258345545438a54a16d1af5 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-01libpayload: Fix 16-bit read/write to PCI_COMMAND registerElyes HAOUAS
Change-Id: I34facbe0cbbdc91066799b586d96abca1599c509 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40743 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01sb/common/smihandler: Fix 16-bit read/write to PCI_COMMAND registerElyes HAOUAS
Change-Id: Ib403f5a231f86bdc60b956e72a4ae631aa6a3899 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-01mb/google/dedede: Enable USB port for camera supportIan Feng
Support USB Chicony user facing camera. BUG=b:155109736 BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using user facing camera. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I7580a58086977e239dca49c1def4f03583831662 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01sb/intel/i82801jx: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: If39cdfb21fec307141593f2482e014e146d4f1f2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/i82801ix: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I5a07a00e1183ef834d97c11268935617cfe17faa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/lynxpoint: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I81b740e0cfcf0e1bf096427b45ffba06d357fee6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/ibexpeak: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I212ef304a03d068232f50a71c318e2b468336339 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01util/intelmetool: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I3a00db217ce7acd11f979e64bb5d417a8bfc8717 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/amd/stoneyridge: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I7b39e895501c3bc672a9dffec06b7969dc2f911f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-05-01mb/intel/jasperlake_rvp: Select PcieRpClkReqDetect in device treeMeera Ravindranath
This CL selects the PcieRpClkReqDetect for the required root ports which is needed to allow proper clksrc gpio configuration. Also, sets the unused PcieClkSrcUsage to 0xFF. BUG=None BRANCH=None TEST=Build and boot jslrvp with NVMe Change-Id: Ie4ae1365a7621b8be3b795798c171e3f7ea9e487 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-05-01soc/intel/jasperlake: Fill PcieRpClkReqDetect from devicetreeMeera Ravindranath
This CL adds support to fill PcieRpClkReqDetect UPD from devicetree. Filling this UPD will allow FSP to enable proper clksrc gpio configuration. BUG=None BRANCH=None TEST=Build and boot jslrvp with NVMe Change-Id: Iad0b394fea019223a5b98fff0cb4a2bd1d2a7bd7 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-05-01src: Remove not used 'include <smbios.h>'Elyes HAOUAS
Change-Id: I12345a5b6c9ce94ca9f8b555154b2278a8ff97bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01include/device/device.h: Include <smbios.h>Elyes HAOUAS
smbios_slot_{type,data_width,length,designation} used for smbios_type_9 needs "smbios.h" Also use already defined 'smbios_type11' in "smbios.h". This will also include <smbios.h> in "static.c" file, this we can remove indirect includes of <smbios.h> in "chip.h" Change-Id: Id412a504da2fd75648636febd150356569e07935 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40310 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/dedede: Remove pad termination for RAM_STRAP_4Karthikeyan Ramasubramanian
The stuffed resistor straps are weaker compared to the internal pull-up. This can cause the GPIO to read '1' always. Remove the internal pull-up. Also read the GPIO only on the boards where the board version is populated. BUG=b:154301008 TEST=Build and boot the mainboard. Change-Id: Ib640211b9f50dfb0174a570eda1625bacbebb855 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01Helios: Update DPTF settings for smooth fan speed controlSumeet R Pawnikar
Update DPTF settings for smooth fan speed control. BRANCH=firmware-hatch-12672.B BUG=b:154074920 TEST=Built and test on Helios system Change-Id: I3f4d9fd9e17541dd5fb7982a8b43a039c41cba87 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01mb/google/dedede: Enable camera support for waddledooPandya, Varshit B
BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: I51dcf96a82535fc1e0b9247fd52af919885575e5 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/dedede: Add ACPI support for cameraPandya, Varshit B
1. Add support as per the schematics 2. Add 2 Ports and 2 Endpoints 3. Add support for OTVI8856 and OTVI5676 4. Add ON and OFF logic as Power Rails are same for both sensor BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: Ic8687bce4896d9fc17b2190b8d11618af3515cc1 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01sb/intel/common/{madt,rcba_pirq}.c: Convert to 96 characters line lengthElyes HAOUAS
Change-Id: I62a213013d9008d8a4a22b5908b7fc7d1b663c4b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01lp/drivers/usb: Add quirk for QEMU XHCI root hubDuncan Laurie
The QEMU XHCI driver does not implement the Port Change Detect bit in the USBSTS register. As a result no devices are attached without looking at each port individually. Detect this as a quirk based on the QEMU XHCI controller PCI ID, and apply it to the root hub quirk list so it can get used by the generic hub driver to skip this check. With this change an attached USB mass storage device is detected and able to boot when supplied to qemu: -drive if=none,id=usbmsc,format=raw,file=/tmp/disk.img -device qemu-xhci,id-xhci -device usb-storage,bus=xhci.0,drive=usbmsc Change-Id: I6689cb1dbb24c93d45f5c5ef040b713925d07588 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39839 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01src: Remove unused 'include <cpu/x86/cache.h>'Elyes HAOUAS
Change-Id: I2bf1eb87bb5476dd77b5a56dfe8846e82d414523 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40666 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/dedede: add new variant for wheeliePeichao Wang
Add initial support for wheelie variant board. BUG=b:154664137 BRANCH=None TEST=build Change-Id: Id638e987f45c247dae824f221a38ccf32626572f Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/nightfury: Tune the usb2_port[0] strengthSeunghwan Kim
Update usb2 port strength parameter for usb2_port[0] to improve SI. BUG=b:154668734 BRANCH=firmware-hatch-12672.B TEST=Built and checked SI margin of USB2 ports Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I8b4b58a67dc0835a677770a2968e8d8d61e0374f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01soc/intel/jasperlake: Add support to generate ACPI GPIO operationsKarthikeyan Ramasubramanian
Add support to generate ACPI operations to get/set/clear RX/TX GPIOs. BUG=b:152936541 TEST=Build and boot the mainboard. Ensure that there are no errors in the coreboot logs regarding unsupported ACPI GPIO operations. Change-Id: Ibc4846fbd9baf4f22c48c82acefed960669ed7d4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01mb/ocp/tiogapass: Update UPD IIO bifurcation at run-timeJohnny Lin
Update UPD IIO bifurcation at run-time according to different Riser cards. For detail please reference Facebook Server Intel Motherboard v4.0, Sec. 10.1.2 Riser card types. With the engineering build FSP, it can only configure IIO for one socket so my local test needs to remove all socket1 elements from tp_iio_bifur_table. This change relies on [1] and need to add GPP_C15 and GPP_C16 to early_gpio_table for gpio configuration in bootblock. [1] https://review.coreboot.org/c/coreboot/+/39427/ Tested=OCP Tioga Pass can see socket0 IIO being updated with an engineering build FSP. Change-Id: I8e63a233a2235cd45b14b20542e6efab3de17899 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-04-30mb/cedarisland_crb: rework GPIOs configuration using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 registers values from the inteltool dump, is more understandable and makes the code much cleaner. The gpio.h file with PAD_CFG macros was automatically generated using the util/intelp2m [1] utility: ./intelp2m -p lbg -file cedarisland/vendorbios/inteltool_gpio.log According to the documentation [2], the Host Software Pad Ownership register only affects the pads that are configured as input. The intelp2m utility takes this into account when converting macros and ignores bits from this register for the corresponding pads. [1] https://review.coreboot.org/c/coreboot/+/35643 [2] Intel Document Number: 549921 Change-Id: Id671a9021a8313d8c3359b89c2934b929bcab1a4 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40736 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30mb/cedarisland_crb: exclude GPIOs reconfiguration by FSP-MMaxim Polyakov
We should be sure that after romstage the pads will be configured according to the config from gpio.h only. This patch sets the GPIO configuration from gpio.h using the soc/intel/common/gpio.c driver again in ramstage. [1] https://review.coreboot.org/c/coreboot/+/40730 Change-Id: Ic49e504d96fe4fd44434e7b981f8d8d9e76880ef Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-04-30mb/intel/cedarisland_crb: use common driver to configure GPIOMaxim Polyakov
According to changes in the soc/xeon_sp code [1,2], server motherboards with Lewisburg PCH can use the soc/intel/common/gpio driver to configure GPIO controller. This patch adds pads configuration map, which has the format required by the GPIO driver. The data for this was taken from the inteltool register dump with vendors firmware. The gpio.h file with pad configuration was generated automatically using the util/intelp2m [3]: ./intelp2m -raw -p lbg -file cedarisland/vendorbios/inteltool_gpio.log [1] https: //review.coreboot.org/c/coreboot/+/39425 [2] https: //review.coreboot.org/c/coreboot/+/39428 [3] https: //review.coreboot.org/c/coreboot/+/35643 Change-Id: I90b91e6dbf8c65c747d0e0d94c61023e610f93ab Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-04-30payloads/tianocore: Fix check for custom bootsplashMatt DeVillier
-n needs to check against a string, but if CONFIG_TIANOCORE_BOOTSPLASH_FILE is unset, then $(CONFIG_TIANOCORE_BOOTSPLASH_FILE) evaluates to nothing and the check fails, leading the Makefile to try and copy a non- existant file/path. Change-Id: Iff717dd48748cff16f485bafaa91c7a225fb5bdb Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-30mb/amd/padmelon: Remove PS/2 keyboard driver selectionPaul Menzel
Most payloads, like GRUB, SeaBIOS and Linux, are able to initialize the PS/2 keyboard themselves, so coreboot does not need to initialize it. Therefore, this option should not be hard-coded for the mainboard, and be left for the user to select. Change-Id: Ibfb7efa22c525e60399afc198af6632330faaac3 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-04-30mb/pcengines/apu1: Remove PS/2 keyboard driver configurationPaul Menzel
Since commit 6aa8c5bc (drivers/pc80: Do not initialize PS2 keyboard by default), the Kconfig option `DRIVERS_PS2_KEYBOARD` already defaults to `n`. So, remove it here, as this option should be user selectable anyway depending on the payload. Change-Id: I3d08fb6bbb3e9d53fd2fed96f26679e8b1e73f8c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-04-30mb/purism/librem_bdw: Remove PS/2 keyboard driver selectionPaul Menzel
Most payloads, like GRUB, SeaBIOS and Linux, are able to initialize the PS/2 keyboard themselves, so coreboot does not need to initialize it. Therefore, this option should not be hard-coded for the mainboard, and be left for the user to select. Change-Id: Iac835d2e7a3232f8e5c76f10984ae3f172f9c0ca Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-30soc/amd/picasso: Add support for em100Furquan Shaikh
This change enables support for em100 for Picasso platform. Since em100 requires lower SPI speed, this change configures speed in all modes as 16MHz. BUG=b:147758054,b:153675510 BRANCH=trembyle-bringup TEST=Verified that em100 works fine on trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib5ea1fe094fda9b8dba63e94b37e61791629564f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40825 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Allow mainboard to configure SPI settingsFurquan Shaikh
This change adds options to allow mainboard to configure SPI speed for different modes as well as the SPI read mode. BUG=b:153675510,b:147758054 BRANCH=trembyle-bringup TEST=Verified that SPI settings are configured correctly for trembyle. Change-Id: I24c27ec39101c7c07bedc27056f690cf2cc54951 Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40421 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Move SPI init calls into sb_spi_init()Furquan Shaikh
This change adds a helper sb_spi_init() that makes all the required calls for configuring SPI to ROM. BUG=b:147758054,b:153675510 BRANCH=trembyle-bringup TEST=Verified that SPI configuration is correct for trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic5b395a8d3bdab449c24b05d1b6b8777e128b5e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40824 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Introduce enums for SPI read mode and speedFurquan Shaikh
This change adds enums for spi_read_mode and spi100_speed in preparation for adding these to chip.h in follow-up CLs. This makes it easier to reference what the mainboard is expected to set for these SPI configs. BUG=b:147758054,b:153675510 BRANCH=trembyle-bringup TEST=Verified that SPI configuration is correct for trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7f9778b41bd059a50f20993415ebd8702a1ad58e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40823 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Get rid of chip.h inclusion from southbridge.hFurquan Shaikh
southbridge.h does not really need chip.h. So, this change removes the inclusion of chip.h from it. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I09c87b975ecd5f7798da8dd858be0c729aef42de Reviewed-on: https://review.coreboot.org/c/coreboot/+/40822 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 23:33:47 +0000