summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-09ASL: Use temporary variable when storing register into itself.Vladimir Serbinenko
Otherwise it triggers a IASL warning with new IASL. Change-Id: I090ee18df78ea779137ee6797c55b96ea27e6d27 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13623 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Fix HPBA shadowing.Vladimir Serbinenko
Store (HPBA, HPBA) had no effect. Rename one of HPBA to avoid shadowing. Change-Id: I54bfa7bcb3e05c28fe8a257825af56527dbf663e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13622 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09rx886ex: Fix PBIF reference.Vladimir Serbinenko
PBIF is package and so a scalar can't be stored instead of it. What was meant is probably Index(PBIF, 0) Change-Id: Iddd18e1f165e0f48fd91124200aba5c6b4a5b4bd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13621 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Remove unused local variables.Vladimir Serbinenko
Change-Id: Ifcbb6916b718d41fb9cda537ffdc3e652e13cbbf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13620 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09stout: Fix ASL warningsVladimir Serbinenko
Change-Id: I1ddf37aa61fe95ad632c35d8041aed02fb1e8c01 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13533 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mainboard/lenovo: Add support for the Lenovo ThinkPad X220iChristopher Spinrath
The ThinkPad X220i is essentially identical to the ThinkPad X220 but it has a Sandybridge i3 (instead of a Sandybridge i5/i7) CPU and the VGA_BIOS_ID differs. Thus, support is added by using the X220 mainboard directory and setting the VGA_BIOS_ID in Kconfig. Change-Id: I33345a099c617e8c87a1de64b7254b7e7716ca90 Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Reviewed-on: https://review.coreboot.org/13594 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-02-09intel/kunimitsu: Clean up GPIOs.Pratik Prajapati
Some of the pins are not connected/used on kunimitsu board, this patch will make them "Not connected". Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BRANCH=none BUG=none TEST=Build and booted in kunimitsu. Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488 Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316700 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13629 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09intel/skylake: Add gpio macro for unused GPIO pinsdavid
Unused PINS will be controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BUG=none BRANCH=none TEST=Build and boot lars Change-Id: I3a6fcd2f3462e8e0d1273aa80b1599b76b160825 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 889bfd66dbc918e9fb0ba1b95b63fd7a3bf180d9 Original-Change-Id: I3bf4aa8599255e5382d99810b4c83b4c97c648b6 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319964 Original-Commit-Ready: David Wu <david_wu@quantatw.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13628 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09Documentation: Add Quark EDK2 build instructions for LinuxLee Leahy
Document the Linux build instructions for EDK2. TEST=Build EDK2 for Quark on Ubuntu 14.04 Change-Id: I5f87eb2c5879f2fd4dd18880908756089a0c7a51 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13644 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09build system: Build Chrome EC firmware on requestPatrick Georgi
With the Chrome EC's "board" name set in Kconfig, the build system will build and add the EC firmware, too. Available for the EC and the USB PD controller. Change-Id: I017d3a44d6ab8a540fcd198b4b09c35e4b98a8cf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13547 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mb/intel/d510mo: Explicitly select NIC on PCI in devicetreeDamien Zammit
While the board configuration still works without this, It's nicer to have the device statically defined since the NIC is hardwired to the board. Change-Id: Ic6682865dd17672c3782bfba9511cd120d1657c1 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13455 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09console: Disable SQUELCH_EARLY_SMP if SMP is not selectedLee Leahy
Add a "depends on SMP" to the value SQUELCH_EARLY_SMP Kconfig value to disable its selection when SMP is not enabled. TEST=Build for Galileo Change-Id: Ia3aa1d2169ed793e1bb26538b74b12347453d5af Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13639 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09soc/intel/quark: Enable Serial PortLee Leahy
Add the code to enable debug serial output using HSUART1: * Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1 * Note that the BIST value is always zero as validated in esram_init.inc * The initial TSC value is currently not saved! Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if serial output is present on HSUART1 at 115200 baud, 8-bit, no parity Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13445 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-09google/lars: Set I2C[4] port voltage to 1.8vdavid
As the audio card needs 1.8V I2C operation. This patch adds entry into devicetree.cb to set I2C port 4 operate at 1.8V. TEST=Built & booted lars board. Verified that I2C port 4 is operating at 1.8V level Change-Id: Ia77841a26d024785d53251ca4b17afcf77f36a5b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e431e7acd85f6d7bf9d47f54ed41c48b8276071c Original-Change-Id: Iccc85a5e3bbf2b5362665036e1294a6635e38fbe Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321000 Original-Commit-Ready: David Wu <david_wu@quantatw.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13627 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09skylake mainboards: Enable backing up VBNV from CMOS to flashDuncan Laurie
Enable the option to back up Vboot non-volatile data from CMOS to flash as these boards have the necessary nvram fmap region and are using vboot2 which does not backup to the TPM. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45 Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324123 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13601 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Add option to back up VBNV CMOS into flashDuncan Laurie
This adds a new kconfig option that will back up the VBNV data from CMOS to flash, and restore it if the CMOS data is invalid during boot. This allows special flags to not get lost when power is lost, RTC reset is triggered, or CMOS is corrupted. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell: 1-boot and run "enable_dev_usb_boot" 2-reboot and check that it is enabled with crossystem 3-run "mosys nvram clear" 4-reboot and check that it is still enabled Change-Id: I38103d100117da34471734a6dd31eb7058735c12 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8a356e616c6885d5ae3b776691929675d48a28f9 Original-Change-Id: I06e7ddff7b272e579c704914a0cf8cc14d6994e8 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324122 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13600 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09google/veyron_rialto: Remove developer mode switchAlexandru M Stan
The developer mode gpio switch on rialto is always hardcoded (through a resistor) as developer mode. We need to ignore it to allow transitions to verified mode with the virtual developer mode stuff. TEST=We can now exit dev mode on rialto Change-Id: I94a949f0973132de5fd008224af79cf612151193 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e78bb8f81eaa9c082e47ad818b64843c2565d00b Original-Change-Id: If11d752d58a5f26fc270ef01b529dad18b4cce46 Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325861 Original-Commit-Ready: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13626 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09google/chromeos/vboot2: defer clearing rec mode switchAaron Durbin
Certain platforms query the recovery mode switch more than just within vboot during the boot flow. Therefore, it's important that the first call to get_recovery_mode_switch() is consistent through memory training because certain platforms use the recovery mode switch to take different action for memory training. Therefore, defer the clearing of the rec mode switch to a place when it's known that memory is up and online. BUG=chrome-os-partner:44827 BRANCH=glados TEST=Three finger salute is honored on chell by retraining memory. Change-Id: I26ea51de7ffa2fe75b9ef1401fe92f9aec2b4567 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6b0de9369242e50c7ff3b164cf1ced0642c7b087 Original-Change-Id: Ia7709c7346d1222e314bf3ac7e4335a63e9a5144 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325120 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13604 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09intel/kunimitisu: set oem_id oem_table_id fields of acpi_header_tFang, Yang A
kunimitisu platform updated these two fields if maxim codec is detected. BUG=chrome-os-partner:49570 BRANCH=glados TEST=Build & Booted kunimitsu board. Verified that kernel can read new strings. Change-Id: Icbe0d87f0b46da794db36191b0e12948fe6a2fe6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f3d07ef07c382a2df140b457273feb3899228e10 Original-Change-Id: Ia6a111d15b851ae3fa918816e13b54ace215a09a Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/324631 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13603 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09nhlt: add api to override oem_id and oem_table_id of acpi_header_tFang, Yang A
This patch added nhlt_soc_serialize_oem_overrides and nhlt_serilalize_oem_overrides to be able to override oem_id and oem_table_id.board file can pass specific string by calling nhlt_soc_serialize_oem_overrides kernel use these two fields to construct a topology binary name if the designate file is not found a default dfw_sst.bin will be used it is optional. BUG=chrome-os-partner:49570 BRANCH=glados TEST=Build & Booted kunimitsu board. Verified that kernel can read new strings. Change-Id: I00b64fb8bb63de601d3116e0b8941057c1efa230 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 374ce08b2d8a2f4e5dd7f51eacb505dbb77fd171 Original-Change-Id: I03623c8ac81efb5a5ea3ec9c6cd604d2e9294022 Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322860 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13602 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Make vbnv_flash driver safe for CAR usageDuncan Laurie
This modifies the vbnv_flash driver to make it safe for use in cache-as-ram by handling the global variables safely. To make this cleaner all of the variables were moved into one structure and referenced from there. BUG=chrome-os-partner:47915 BRANCH=glados TEST=build and boot on chell using following patches to test backup and restore of vbnv_cmos into flash Change-Id: I3a17fa51cfd754455502ac2e5f181dae35967f2a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 48876561fa4fb61e1ec8f92596c5610d97135201 Original-Change-Id: Id9fda8467edcc55e5ed760ddab197ab97d1f3d25 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324121 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13599 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Remove CONFIG_VBNV_SIZE variableDuncan Laurie
The VBNV region size is determined by vboot and is not really configurable. Only the CMOS implementation defined this config variable so switch it to use VBNV_BLOCK_SIZE defined by vboot in vbnv_layout.h instead. This requires updating the broadwell/skylake cmos reset functions to use the right constant. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I45e3efc2a22efcb1470bbbefbdae4eda33fc6c96 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e2b803ff3ac30ab22d65d1e62aca623730999a1d Original-Change-Id: I4896a1a5b7889d77ad00c4c8f285d184c4218e17 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324520 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13598 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Add vbnv wrapper for the different backendsDuncan Laurie
Add a wrapper around the vbnv implementations and call into the different backend functions from there. Also move some of the common functions to the common code and simplify the backend drivers. This will allow some of the code to be re-used so the CMOS backend can backup the data into the flash backend. One side effect of this is that the cache of VBNV was removed from CMOS and EC backends and moved into the VBNV wrapper, but the flash backend also still has a separate cache because it has more state and complexity in the implementation. The wrapper cached data is not used for normal vbnv_read/vbnv_write because some callers need the ability to force a write if the backend storage is cleared (i.e. CMOS clear). BUG=chrome-os-partner:47915 BRANCH=glados TEST=build and boot on chell Change-Id: I4d2e0e99af7e8a44aec77ad9991507401babcca6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c30f60434a64f6c0eb9ede45d48ddafff19dd24f Original-Change-Id: Ia97f6607c5ad837b9aa10b45211137221ccb93a0 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324120 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13597 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-08soc/intel/quark: Add TempRamInit supportLee Leahy
Successfully invoke TempRamInit from the FSP binary: * Don't relocate the FSP binary image * Copy the FSP binary into ESRAM * Specify Kconfig values to easily debug ESRAM and TempRamInit code * Specify the FSP binary file location * Specify the FSP binary image ID * Specify where in the flash image the FSP image must reside * Specify the FSP data file location * Specify where to place the FSP data file in the flash image * Specify where in the ESRAM the FSP image must reside Test 1 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select ENABLE_DEBUG_LED_FINDFSP" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Test 2 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Remove "select ENABLE_DEBUG_LED_FINDFSP" * Add "select ENABLE_DEBUG_LED_TEMPRAMINIT" * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13443 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-08soc/intel/quark: Enable ESRAMLee Leahy
The Quark SoC uses ESRAM instead of cache-as-RAM. This code requires that utils/xcompile/xcompile change the machine architecture from i686 to i586 to ensure that the Quark does not attempt to execute unsupported instructions: * Adjust Makefile.inc to add the RMU to the coreboot image * Add code to enable the ESRAM Directly use the QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h file from the EDK2 tree (https://github.com/tianocore/edk2.git) to enable easy differences and correct issues in coreboot that were found in EDK2. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_RMU_FILE" * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Remove power from the board * Apply power to the board * Testing is successful if the SD LED is on indicating that the end of esram_init.inc was reached Change-Id: I91d919da144bb72a5d4c4a8050ffab256632a395 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13440 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-08drivers/intel/fsp1_1: Make fsp_run_silicon_init publicLee Leahy
Remove the "static" declaration from fsp_run_silicon_init and declare the routine in ramstage.h. This routine can be called directly when FSP is already in RAM. TEST=Build and run on Galileo Change-Id: Iddb32d00c5d4447eab5c95b0ad5c40309afa293e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13630 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-07lint: test for assembler dialect switchesPatrick Georgi
We prefer the default AT&T dialect on x86 Change-Id: I7a5778c82ab5df6e971dfc73e98373893cfeeb92 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13135 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-02-05mainboard/intel/galileo: Add board_info.txtLee Leahy
Add missing file to fix complaints by git commit script. TEST=None Change-Id: I4aac63821a7208fb86fa6c0dda16b7537e49a69a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: x86 add sleep state and minimal memory setupLee Leahy
Document how to add the sleep state and minimal memory setup. TEST=None Change-Id: Ibebeef34269dbf2366f1bea6d734f6bade4e4028 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13446 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: x86 Enable Serial OutputLee Leahy
Document the steps necessary to enable serial output TEST=None Change-Id: Ifc0e700d7ef54fb1e28ca9bca34b94cccd3633ac Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13444 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: Add the x86 FSP BinaryLee Leahy
Document how to add the FSP binary to the SPI flash image. TEST=None Change-Id: I51b16600ea69853240282ac2eb0d84935b8e2a71 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13442 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: Add Galileo Gen 1 DocumentationLee Leahy
TEST=None Change-Id: Ic5a732dc27e772c4708a090ecd0c0af17dc5b056 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13606 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: Fix links to Intel/documentation.htmlLee Leahy
Fix links to the documenation.html page which was renamed from x86Documenation.html. TEST=Verified documentation links and searched for x86Documenation.html Change-Id: Icee79bab4c05ac9b8010dc7acdde8dd5e2ab2909 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13592 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kcma-d8: Add initial ASUS KCMA-D8 supportTimothy Pearson
Change-Id: Idefa304a27823c741fab72ff5c2f20fed1aa5a39 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13523 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kcma-d8: Copy ASUS KGPE-D16 for initial support workTimothy Pearson
Also updated KGPE-D16 strings to KCMA-D8 throughout the copy to work around Jenkins failures caused by an unmodified clone. Change-Id: I943e81c8c2987a8333fc2a1cdb3675abf2d90cf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13521 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kgpe-d16: Add CPB control CMOS optionTimothy Pearson
Change-Id: I28ad2298ad4dfb428dcd41a4f00db88c5e817cd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13173 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-02-05cpu/amd/fam10h-fam15h: Honor CMOS option to disable CPB (core boost)Timothy Pearson
On certain systems and CPUs Core Performance Boost (CPB) may cause sporadic system lockups. This issue is also somewhat known on the various proprietary BIOSes, therefore it seems to be a hardware incompatibility when present. Allow the user to disable CBP if needed. Change-Id: Id6395d067d48963f6c084ad0bf79e23419af24d8 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13172 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-02-05nb/amd/mct_ddr3: Fix RDIMM training failure on Fam15hTimothy Pearson
Certain registered DIMMs failed training due to an error likely introduced during historical rebase. Ensure that the SubMemclkRegDly bit is set according to BKDG recommendations on Family 15 processors. Change-Id: I24c95265dada9eabf4df280b6f2b4a1eb9cecaf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13148 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05nb/amd/mct_ddr3: Work around RDIMM training failureTimothy Pearson
Under certain conditions, not elucidated in the BKDG, an extra memclock of CAS write latency is required. The only reliable way I have found to detect when this is required is to try training without the delay, and if DQS position training fails, adding the delay and retraining. This is probably related in some form or another to the badly broken DQS Write Early algorithm given in the BKDG. Change-Id: Idfaca1b3da3f45793d210980e952ccdfc9ba1410 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13531 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05cpu/amd/fam10h-15h: Set PowerStepUp/PowerStepDown on Fam15hTimothy Pearson
Multilink Family 15h processors were being configured with an incorrect PowerStepUp/PowerStepDown value. Set the value according to the BKDG, and clean up the terrible formatting of the power_up_down() function that led to the incorrect values being overlooked until now. Also change u32 declarations to uint32_t in modified functions. Change-Id: I16e1f5205d6b5f349a3e7167dea04c9eefda4684 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13174 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kgpe-d16: Update power LED handlingTimothy Pearson
- Stop blinking when coming out of standby. - Remove code to set blink when going into S3. This never worked correctly. Change-Id: I958990f3203d3cbe7ae64833800d631c1034327f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13171 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-053rdparty/chromeec: Add Chrome EC firmware sourcesPatrick Georgi
Note that this is a manually added commit id (to get the CrEC fixes in that are necessary for building outside cros_sdk), so it will probably fail. Change-Id: Idc15cf268c663ae49b209b92b198c9a4d122c7e3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13546 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04Documentation: Add x86 bootblock supportLee Leahy
Document what is involved with adding the bootblock support. TEST=None Change-Id: I6c8cc38e1b9346b4962588b33ca5e4ab8eac24c3 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13441 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04mainboard/intel/galileo: Add Intel Galileo Gen 2 SupportLee Leahy
Add the files to build soc/intel/quark and mainboard/intel/galileo for a minimal coreboot image. Please note that this configuration does not run. Include HTML documentation for the Galileo Gen 2 board. Testing is successful if build completes successfully. TEST=Build for Galileo Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13507 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04skylake boards: disable ACPI PM TimerArchana Patni
These devicetree patches set the ACPI PM Disabled variable to 1. This will disable the ACPI PM timer and remove from FADT table. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319362 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13589 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdownArchana Patni
Keeping ACPI PM timer alive prevents XTAL OSC shutdown in S0ix which has a power impact. Based on a DT variable, this patch disables the ACPI PM timer late in the boot sequence - disabling earlier will lead to a hang since the FSP boot flow needs this timer. This also hides the ACPI PM timer from the OS by removing from FADT table. Once the ACPI PM timer is disabled, TCO gets switched off as well. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Icfdc51bc33b5190a55196d67e18afdaaa2f9b310 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 18bcb8a434b029295e1f1cc925e2b47e79254583 Original-Change-Id: Ifebe8bb5a7978339e07e4e12e174b9b978135467 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319361 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13588 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: unconditionally set SPI controller BARAaron Durbin
The setting of the SPI controller BAR was conditional on the nominal frequency being set. Therefore, that doesn't mean the SPI BAR is set on all boots. Move the setting of the BAR in the southbridge_bootblock_init() which is called prioer to cpu_bootblock_init(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Confirmed spibar is always set on glados. Change-Id: Ia58447d70f5e39a4336d4d08593f143332de833a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 56fff7c25c2eb0ccd90e08f71c064b83c66640f8 Original-Change-Id: I1e0cff783f4b072b80589a3a84703a262b86be3a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/319461 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13587 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chromeos/vboot2: honor boot region device sizeAaron Durbin
Vboot keeps track of the size of the hashed region in each RW slot. While that size was being used to calculate the hash it wasn't being honored in restricting the access within the FMAP region for that RW slot. To alleviate that create a sub region that covers the hashed data for the region in which we boot from while performing CBFS accesses. BUG=chrome-os-partner:49764 BUG=chromium:445938 BRANCH=glados TEST=Built and booted chell with cbfstool and dev-util patches. Change-Id: I1a4f45573a6eb8d53a63bc4b2453592664c4f78b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4ac9e84af5b632e5735736d505bb2ca6dba4ce28 Original-Change-Id: Idca946926f5cfd2c87c4a740ad2108010b6b6973 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324093 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13586 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/lars: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=None Change-Id: I331f25ad4764cab972af7198f6154f604d2dbeae Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c1cb04645cbf34696e6adf48acec9d396e87ca9 Original-Change-Id: I8d14ea16b2d07bbf04c5c33e4205a85d9f21847b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324075 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13585 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/kunimitsu: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built kunimitsu w/ separate verstage. Change-Id: If34cae5516a6df7f72f1f57cab495db70787177e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 543155665e1b05efe82c7440c124a5c83c656aa6 Original-Change-Id: I7281c4373fcbaaf0beedaa63dcf0dedb5316349f Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324074 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13584 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 21:11:41 +0000