summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-10spi_flash: Make .read() callback optionalJulius Werner
All SPI flash chip drivers currently in coreboot use the generic read functions (spi_flash_cmd_read_fast()/_slow()) as their read callback. The only use case for specialized read callbacks we have left is with specialized flash controllers like Intel fast_spi (which sort of impersonate the flash chip driver by implementing their own probe function). This patch unifies the behavior for all normal flash drivers by making the read callback optional and letting them all fall back to a default read implementation that handles normal fast/slow reading. Most of the drivers used to install the respective callback after checking CONFIG_SPI_FLASH_NO_FAST_READ, but some hardcoded either slow or fast writes. I have found no indications for why this is and spot-checked datasheets for affected vendors to make sure they all support both commands, so I assume this is just some old inaccuracy rather than important differences that need preserving. (Please yell if you disagree.) Also take the opportunity to refactor some of the common spi_flash.c code a bit because I felt there are too many nested functions that don't really do enough on their own, and centralizing stuff a bit should make it easier to follow the code flow. (Some of this is in preparation for the next patch.) Change-Id: I2096a3ce619767b41b1b0c0c2b8e95b2bd90a419 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-06-10spi_flash: gigadevice: Adopt Winbond chip info structureJulius Werner
This patch changes the Gigadevice SPI flash driver to adopt the same structure packing improvements for the hardcoded parameters of individual chips that was implemented for Winbond last year. This cuts the size of the hardcoded info nearly in half and should save us a few hundred bytes in every stage. Change-Id: I9910dcb9b649f51b317f3f8fcba49e5e893f67d2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-10cbfs_spi: Enable speed logging by default for BIOS_DEBUGJulius Werner
The SPI transfer speed logging in cbfs_spi is super useful, doesn't get in the way (just adding one line per stage, essentially) and should have no notable overhead. Let's enable it by default for the BIOS_DEBUG log level rather than having to recompile to get it. Also fix an issue with building this code on MIPS due to lack of 64-bit division primitives. (This means MIPS and arm32 board may display incorrect results when reading more than 4MB in a single transfer, which sounds very unlikely.) Change-Id: I03c77938afe01fdcecf917e8c4c25cc29cdc764e Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-10mainboard/hp/z220_sff_workstation: remove unused header fileFelix Held
Change-Id: I4c780afaccd604a1bf4da67eea713f809744ddb2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-09acpigen: Add support for IndexFieldPatrick Rudolph
Add support for generating IndexField, which is similar to Field. Change-Id: If66a627e64953696b0b68488256bd5c141e4c205 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33032 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09autoport: Generate a libgfxinit template when IGD is detectedIru Cai
Change-Id: I213628e525cc11c502de7d538bd60f49f3a930b9 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-09mainboard/Kconfig: add option for a 6144 KB(6 MB) ROM sizeKacper Słomiński
Signed-off-by: Kacper Słomiński <kacper.slominski72@gmail.com> Change-Id: I7a1949c3512528b6b73955d907efc21728eed739 Reviewed-on: https://review.coreboot.org/c/coreboot/+/30980 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09Documentation: Add display panel specificsDaniel Maslowski
Change-Id: If1a393578556d51499c700b68187034830d19215 Signed-off-by: Daniel Maslowski <daniel.maslowski@img.ly> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-09mb/google/hatch: Add 16G 2666 LPDDR3 SPDShelley Chen
One variant is asking for support for 16G 2666 LPDDR3, so adding generic SPD for that. BUG=b:133455595 BRANCH=None TEST=None as this is not being used yet Change-Id: If16a101119aabc30d6ea83e95e9ded2e089a982d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-09mb/google/hatch: Add 8G 3200 SPDShelley Chen
One variant is asking for support for 8G 3200 DDR4, so adding generic SPD for that. BUG=b:132920013 BRANCH=None TEST=None as this is not being used yet Change-Id: I89cd3287aaf0baf384c4fe82d0881b0c48e09753 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33258 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09mb/intel/icelake_rvp: Update FSP-M UPDs to support iclrvp memory initAamir Bohra
Change-Id: Ib55fdfae6e9320c44761682fc134be0731de0fcf Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32522 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09mb/google/dragonegg: Pass FSP-M UPD as per dragonegg requirementSubrata Banik
TEST=Able to boot dragonegg board with LPDDR4 memory. Change-Id: Idbe0aa79879f2b1a754dd1f6718ad4ba1173e760 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31956 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09soc/intel/icelake: Pass FSP-M/S UPD as per ICL requirementAamir Bohra
1. Gfx stolen memory requirement for ICL GFX 2. Enable PeiGraphicsPeim support Change-Id: I22dd14249b7402873f1ac07bee164ee7bee36414 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31955 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-09vendorcode/intel/../icelake: Update ICL FSP header BIOS version 3092Subrata Banik
After building from here : https://chrome-internal.googlesource.com/chromeos/third_party/intel-fsp/icl/+/refs/tags/upstream/BIOS_Version_3092 Change-Id: I8924dbf4a8d6a303540ced1c9c48586d26d6beaa Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2019-06-09soc/intel/common: Skip SoC GT programming based on CONFIG_SKIP_GRAPHICS_ENABLINGSubrata Banik
Skip GT specific programming in coreboot to support early parts without GT enable. Change-Id: I231e13367cbfbafbfb0cb4235487dbcbcae76820 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33189 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08Kconfig: Guard RAMPAYLOADNico Huber
The RAMPAYLOAD symbol added by 7e893a02c0 (Kconfig: Create RAMPAYLOAD kconfig) is shown unconditionally for all x86 systems. It generally creates a lot of confusion to prompt for something that isn't imple- mented or not working. So guard it with another Kconfig that can be selected by platforms that actually support it. Change-Id: I6d158382d1000b8b40ca1368e2efff0c39884f15 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33263 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08mb/lenovo/t430: Fix Dual GraphicsPatrick Rudolph
* Select ONBOARD_VGA_IS_PRIMARY in driver/lenovo/hybrid_graphics to fix disabling iGPU in 'Dual Graphics' on Lenovo T430. * Remove ONBOARD_VGA_IS_PRIMARY in mainboards that already select DRIVERS_LENOVO_HYBRID_GRAPHICS. Change-Id: I6594fbb957c9a8135fe670d38b5755adf29d2dff Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-08nb/intel/sandybridge: Drop iommu.c and rename functionsPatrick Rudolph
* Move the contents of iommu.c to early_init.c. * Name the functions like done in intel/soc/common. * Move PAMx register setup to own function Preparations for integration in soc/intel/common/* Tested on Lenovo T520 (Intel Sandy Bridge). Still boots to OS, no errors visible in dmesg. Change-Id: I3ec395bf6722bceb84316e92733dcfcd7a093639 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32068 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08src/soc/intel/skylake/acpi: Remove Return for PS0/3Christian Walter
Remove the Return statement within the PS0, PS3 methods. PS0/3 are not allowed to return anything. Even an empty return will be resolved to Return(Null). In order to be conform with the specification, the code has been refactored to remove the return statements. Change-Id: I7b4820e8dd40a9169a7facce67282b8af5af67af Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33293 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08src/soc/intel/skylake/bootblock: Add SPT C236 to PCH TableChristian Walter
Add Skylake C236 to the PCH Table. The one which was already in there is actually the CM236 and not the C236. This can be checked in datasheet: 100-series-chipset-datasheet-vol-1 p. 25. Change-Id: I435927f15e9d3219886375426b09c68632dfe3d9 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-08northbridge/gm45: document that raminit doesn't support mirrored ranksFelix Held
Change-Id: I8a66a1355974f6771c5e4bae0dc60da2447122d1 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-07sb/amd/sb700: Fix misleading formattingMarshall Dawson
Change-Id: I65872d6f1d71d050c8589d3616340648cf95048b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-07ifdtool: Enable GbE/PDR/EC region access only if they existDuncan Laurie
Instead of assuming GbE/PDR/EC regions may exist or not, check if there is a valid region defined in the descriptor and set the region access permissions based on that. The net effect change is to enable the use of the PDR region on the sarien platform, which also uses the GbE and EC regions. This results in the following example changes: mb/google/sarien (GbE, PDR, EC) . DESC BIOS ME GbE PDR EC -BIOS r rw rw r ------------------------------- +BIOS r rw rw rw r mb/google/eve: (no GbE, no PDR, no EC) . DESC BIOS ME GbE PDR EC -BIOS r rw rw r -ME r rw r -GbE r rw -EC r rw ------------------------------- +BIOS r rw +ME r rw +GbE +EC BUG=b:134703987 Change-Id: I7aeffc8f8194638c6012340b43aea8f8460d268a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33273 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-07ec/google/wilco: Add UCSI supportDuncan Laurie
This change adds support for the UCSI specification in order to provide information about the Type-C port and an interface to perform power and data role swap. This change is split across the DSDT and SSDT, with the shared memory and operation region declared in the SSDT after being allocated in CBMEM. The OS will fill in the registers in the system memory region and then call the _DSM method wtih a read or write argument. The DSM method will copy the required registers to/from the system memory and the EC and perform the write or read action. Responses from the EC will generate a new SCI with event code 0x79 which will notify this UCSI ACPI device and the OS driver will take action to read status from the EC. BUG=b:131083691 Change-Id: I438a2bdfaf6720acd8354e0339dcef2844b63a4e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-07cbmem: Add ID for UCSIDuncan Laurie
The USB Type-C Connector System Software Interface (UCSI) defines a required memory oregion for the OS UCSI driver to use to communicate with the BIOS and EC. This provides a CBMEM ID that can be used by drivers to allocate this shared memory region for the UCSI driver to use. BUG=b:131083691 Change-Id: Id5b7fa19436443bc11a6ebe3ce89cd552cee4d85 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-07soc/intel/cannonlake: Add _DSM method for SD controllerV Sowmya
The SD controller seems to take some time after restarting the clock at 1.8V before it actually switches from 3.3V to 1.8V. Add a _DSM method that simply sleeps when switching between 3.3V and 1.8V. Otherwise, the kernel times out too quickly waiting for the card to acknowledge the 1.8V switch. The card itself is waiting until it sees the clk signal being driven at 1.8V. BUG=b:125441242 TEST=Boot Hatch with SD card and CR2 removed, observe voltage switch succeeds. Change-Id: I15090ed9f9bc90b35dfcba47c913e3d37b799d0b Signed-off-by: V Sowmya <v.sowmya@intel.com> Signef-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-07soc/intel: Add some missing MCH PCIe IDsKeno Fischer
These are documented in the Intel Datasheet entitled "6th Generation Intel® Processor Datasheet for S-Platforms" "6th Generation Intel® Processor Datasheet for H-Platforms" (Volume 2) Without them, coreboot fails to properly inform the payload of the amount of available memory. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Change-Id: I5b810c6415c4aa0404e5fa318d2c8db292566b8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/33286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-06mb/google: Add GPU panel settings for SKL/KBL boardsNico Huber
The values are generated from the respective VBTs. Change-Id: Ic74e9dac898c17ce64a94b06682997a39daeff69 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30247 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/intel/skl/graphics: Implement panel setupNico Huber
Logs from Linux' i915 suggest that not even the FSP/GOP takes proper care of this. The sequence is mostly the same as on older platforms, with a slightly different configuration of the backlight PWM. We light the panel up with 50% PWM duty cycle. This often results in an already rather high perceived brightness, but shouldn't be too blinding. Change-Id: I762a77c8df023a4c14af502af5edfeeb961da1ae Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-06-06soc/amd/common: Make biosram functions more readableMarshall Dawson
Modify the 16 and 32 bit BIOS RAM access functions that had been originally moved from stoneyridge. This was suggested in the review of 69486cac7: Create AcpiMmio functionality from stoneyridge Change-Id: I5b491da6f263cbab2b549301e16a7e19896f2428 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32932 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Update AcpiMmio commentsMarshall Dawson
Document the AcpiMmio individual blocks better. This is in response to a request in gerrit for 69486cac7: Create AcpiMmio functionality from stoneyridge Correct comments that were inadvertently left in place from older patches. Change-Id: I4c16a866de5622e8cfbd3a08816b9d3182950d0e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32931 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06qcs405: Enable VBOOT_MIGRATE_WORKING_DATANitheesh Sekar
Enable VBOOT MIGRATE_WORKING_DATA so that the data required by depthcharge is copied into the coreboot tables and made available to depthcharge after BOOT_IMEM is cleansed. Change-Id: I0317b73d24b07553672695998589f86677e0be64 Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-06-06qcs405: Add PRESERVE flag for RO_VPDNitheesh Sekar
Add PRESERVE flag to preserve the VPD data. Change-Id: I78ab4de31030465345c5ae58813bfed5e27494fb Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33020 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Fix consistency in AcpiMmio argumentsMarshall Dawson
Change all arguments named "offset" to "reg" to match the others. These should have gone into change 69486cac7: Create AcpiMmio functionality from stoneyridge Change-Id: Ifdd00d0a5d1e03bfa68a13eeece2d2cfd56aa39d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32930 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Clean up prototypes for AcpiMmioMarshall Dawson
Reorder the biosram prototypes to match the rest of the file. Remove prototypes for asf 32-bit functions that have not been implemented. Change-Id: Ic2663158d8a71952c26eb37f34342a6ea5e58a42 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32929 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06src/amd/stoneyridge: Move alink source to commonMarshall Dawson
Relocate the alink access functions out of stoneyridge where they were dead code. This source maintains the ability to access all register spaces, however more modern APUs define only ABCFG in the BKDGs. BUG=b:131682806 Change-Id: I5c558ccc64bd04a66399c678d43beb0a97e72f63 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32663 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Add ALink-AHB Bridge to iomap.hMarshall Dawson
Add the address and replace the hardcoded value in the ASL code. Change-Id: If0b99de78d8c5948e2e5f2aa50dfc2efc1bd1ba1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32662 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move sata to commonMarshall Dawson
Relocate generic sata support from stoneyridge to common/block. BUG=b:131682806 Change-Id: I4e9eddaa291e5e03f4f8d88826973c5b8ee9a1c5 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32661 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Split sata functionalityMarshall Dawson
Separate chipset-specific source from sata_init(), and modify it to better match coreboot conventions. A subsequent patch will move the generic portion to soc/amd/common. The support for enabling port multipliers appears to have been first added for Kabini. Although missing from the documentation, the ability to affect the HBA Capabilities Register seems to remain for Stoney Ridge. Change-Id: I5dd9f613d36badc3e4d185a22b4475cb82ce187e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32660 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Remove sb_util.cMarshall Dawson
Obsolete pm_acpi_pm_cnt_blk(), and remove it and pm_acpi_pm_evt_blk(). Relocate the remaining functions to get/save UMA information to southbridge.c. Change-Id: I90c4394e3cf26f4ad60a078948a84303bda693d0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32659 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06nb/intel/pineview/raminit.c: Remove variable set but not usedElyes HAOUAS
Change-Id: I4faf698e904c461803e867d212c31958119cc0ca Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32941 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Relocate acpi_get_sleep_type()Marshall Dawson
Move the function into common code. Convert it to use the memory- mapped access type. Convert vboot_platform_is_resuming() to call it instead of duplicating the source. BUG=b:131682806 Change-Id: I245bebb8dc2d331cdd56acfb245a004536b792ab Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32658 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move IOMMU support to commonMarshall Dawson
BUG=b:131682806 Change-Id: Icb02180645c9e7e6dc973438c777228b031b3f54 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32657 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move hda.c to commonMarshall Dawson
BUG=b:131682806 Change-Id: I1aa869584fd6743101c07a6a508abff6426df18d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32656 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Relocate MMIO access of ACPI registersMarshall Dawson
The AcpiMmio block allowing direct access to the ACPI registers has remained consistent across AMD models. Move the support from soc//stoneyridge to soc//common. BUG=b:131682806 Change-Id: I0e017a71f8efb4b614986cb327de398644599853 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32655 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/common: Rework block/acpiMarshall Dawson
The halt.c file relies on the ACPI register block in the AcpiMmio range. This register block is consistent across AMD device generations, so to prepare for moving additional stoneyridge support to this directory by changing the file name and add a Kconfig symbol to control the build. BUG=b:131682806 Change-Id: I2f7442dd78bced7f69b0416a8cd751291f82151f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32654 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move LPC support to commonMarshall Dawson
AMD devices traditionally have the LPC-ISA bus at 14.3 and the definition has been very consistent. Relocate the feature from stoneyridge into common/block. BUG=b:131682806 Change-Id: I8d7175b8642bb17533bb2287b3e3ee3d52e85a75 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32653 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Rework SPI base address get/setMarshall Dawson
A subsequent patch will move the soc//stoneyridge LPC functionality to a common directory. Prepare by reworking the SPI BAR configuration function in southbridge.h. The SPI BAR is not a typical PCI BAR, and is at D14F3xA0. Change-Id: I73ddb4afaf9e67ca0522ecb6085b23c92fedc461 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32652 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move GPIO support to commonMarshall Dawson
The banked GPIO functionality in the AcpiMmio block has been consistent since the Mullins product. Move the basic support into a common directory. Each product's pin availability, MUXes, and other details must remain specific to the product. The relocated source also drops the weak configure_gevent_smi() that reports SMI is not available. The stoneyridge port relies on SMI to do its initialization, similar to modern soc/intel devices. This is the plan for future soc/amd ports, so make a missing function a build error instead of a runtime warning. BUG=b:131682806 Change-Id: I9cda00210a74de2bd1308ad43e2b867d24a67845 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-06Makefile.inc: Compile smm files independent ARCH_RAMSTAGE_X86_32/64Subrata Banik
This patch makes smm related files compile independent of ramstage getting compiled. If user selects RAMPAYLOAD to boot without ramstage, there will be need for smm code to get compiled independently. Change-Id: I17a3eb80a4d5ef86e0319357c01b6bf5b90ef15b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 22:58:51 +0000