coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2015-04-10	samus: Enable vr_slow_ramp	Shawn Nematbakhsh
2015-04-10	x86: Support reset routines in bootblock	Lee Leahy
2015-04-10	broadwell: Correct XHCI offset for USB 3.0 ports	Julius Werner
2015-04-10	broadwell: Set PCIe replay timeout to 0xD	Duncan Laurie
2015-04-10	samus: Use codec internal 1.8V as DACREF source	Ben Zhang
2015-04-10	samus: Set MICBIAS1 to 2.970V	Ben Zhang
2015-04-10	baytrail: add code for supporting 2x ddr refresh rate	Kane Chen
2015-04-10	broadwell: Add configuration for tuning VR for C-state operations	Duncan Laurie
2015-04-10	samus: Adjust SATA Gen3 TX voltage amplitude	Duncan Laurie
2015-04-10	broadwell: Preserve VbNv around cmos_init	Duncan Laurie
2015-04-10	broadwell: Add function to apply PRR to a range of SPI flash	Duncan Laurie
2015-04-10	samus: Add clear_recovery_mode_switch function	Duncan Laurie
2015-04-10	samus: Set current backlight PWM value	Duncan Laurie
2015-04-10	broadwell: Turn off panel backlight in S5 SMI handler	Duncan Laurie
2015-04-10	broadwell: Skip steps when disabling PCIe port	Duncan Laurie
2015-04-10	broadwell: Remove XHCI workarounds on WPT	Duncan Laurie
2015-04-10	broadwell: Only do pre-graphics delay when running option rom	Duncan Laurie
2015-04-10	PCI - Add interrupt disable bit definition	Lee Leahy
2015-04-10	samus: Add ACPI binding for rt5677 codec SPI	Ben Zhang
2015-04-10	broadwell: Fix PCIe ports programming sequences to enable HSIOPC	Wenkai Du
2015-04-10	samus: Add RT5677 ACPI/DT bindings with _DSD	Duncan Laurie
2015-04-10	broadwell: Update SATA Gen3 TX adjustment registers	Duncan Laurie
2015-04-10	broadwell: Add a few bits to finalize step	Duncan Laurie
2015-04-10	baytrail: fix the coding error on PCIe L1 exit latency	Kevin L Lee
2015-04-10	TPM: Reduce buffer size to fix stack overflow	Julius Werner
2015-04-10	Baytrail: Prior to PCI scan, wait for LCTL to be active in 50 ms	Kevin Hsieh
2015-04-10	tpm: Remove error message for unknown resource type	Duncan Laurie
2015-04-10	Broadwell: Set boot_mode of pei_data before running reference code	Kenji Chen
2015-04-10	samus: Move board version to a separate file	Duncan Laurie
2015-04-10	tpm: Add ramstage driver and interrupt configuration	Duncan Laurie
2015-04-10	tpm: Move the LPC TPM driver to a subdirectory	Duncan Laurie
2015-04-10	broadwell: Increase I2C SDA hold timing to 300ns	Chiranjeevi Rapolu
2015-04-10	broadwell: add RCBA posting read after writing	Wenkai Du
2015-04-10	Broadwell: Synchronization with FRC for Root Port Power Management	Kenji Chen
2015-04-10	broadwell: Skip DDI-A enable in S3 resume	Duncan Laurie
2015-04-10	broadwell: Add support for ACPI \_GPE._SWS	Duncan Laurie
2015-04-10	baytrail: Switch from ACPI mode to PCI mode for legacy support	Marc Jones
2015-04-10	southbridge/intel/fsp_rangeley/ : Spellcheck + Formatting	nicky sielicki
2015-04-10	vboot: Remove unused 2lib header path	Randall Spangler
2015-04-10	vboot: Include vb2_api.h, instead of lower-level vboot2 header files	Randall Spangler
2015-04-10	vboot2: Reduce minimum required work buffer size	Julius Werner
2015-04-10	vboot: add physical recovery switch support	Daisuke Nojiri
2015-04-10	vboot2: update fw_version_tpm when creating vboot1 shared data	Daisuke Nojiri
2015-04-10	ramoops: Add support for passing ramoops region through cb tables.	Furquan Shaikh
2015-04-10	chromeos: Add correct dependency on HAVE_ACPI_TABLES for gvns and ramoops.	Furquan Shaikh
2015-04-10	vboot: reduce references to parent's files in Makefiles	Daisuke Nojiri
2015-04-10	vboot: fix invalid check for the returned value from spi_flash->write	Daisuke Nojiri
2015-04-10	cbtables: Add RAM config information	David Hendricks
2015-04-10	vboot: adding VBSD_BOOT_FIRMWARE_WP_ENABLED logic	Gediminas Ramanauskas
2015-04-10	fmap: use CBFS for all other than x86 platforms	Vadim Bendebury