summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-11soc/amd/common/espi_util: make reg parameter unsignedFelix Held
Th register number passed to the low level read/write functions should never be negative. Change-Id: I5d7e117b3badab900d030be8e69ded026d659f8a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-11soc/amd/stoneyridge/acpi: clean up global NVSFelix Held
Some fields in GNVS seem to be copied over from Apollolake to Stoneyridge. This patch removes the unused fields. Change-Id: I135c4a4547668fe67e74d0ea9ae3a03c3687375f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-11mb/google/zork: config ddi for dirinbozKevin Chiu
dirinboz does not support native HDMI, config DDI as below: DDI0: eDP DDI1: DP DDI2: DP BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: I9dffdf5654680e3c2c0b259ee82a471f8ff14f56 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-11mb/google/zork: fix incorrect DRAM SPD table load for dirinbozKevin Chiu
BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: Ia736b0f25824eebe4ef25a11646f82963611e3b3 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-11mb/google/zork: move USB OC pin mapping to trembyle base boardFelix Held
The USB OC pin mapping is similar enough to move it to the base board and just have two overrides for trembyle, which is based on an older version of the schematics, and one override for woomax, which doesn't use one USB port. BUG=b:163081097 Change-Id: I7e305d7e6f51d7ef7a4c699e3bacc6bcd699d2f2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-08-11nb/intel/sandybridge/raminit: Add commentsPatrick Rudolph
Add comments found when testing ECC scrubbing code. This is a cosmetic change. Change-Id: I7975f6070c2002930eec407a6b101a1295495b25 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40947 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-11nb/intel/sandybridge/raminit: Fix ECC scrubPatrick Rudolph
The scrubbing method was never correct nor tested. Fix that by observations made on mrc.bin. Tested on HP Z220 with ECC memory and Xeon E3 CPU: The whole memory is now scrubbed. Change-Id: Ia9fcc236fbf73f51fe944c6dda5d22ba9d334ec7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40721 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-11nb/intel/sandybridge/raminit: Add ECC debug codePatrick Rudolph
* Add ECC test code when DEBUG_RAM_SETUP is enabled * Move ECC scrubbing after set_scrambling_seed() to be able to observe what has been cleared in the test routine. If clearing happens before set_scrambling_seed the data is XORed with a different PRN. Data read from memory will look random instead of all zeros. * ECC scrubbing must happen after dram_dimm_set_mapping() The ECC logic is set to "normal mode" in dram_dimm_set_mapping(). In normal mode the ECC bits are calculated and stored on write transactions. * Move method out of try_init_dram_ddr3(). This satisfies point 2 and point 3 of the list above. Change-Id: I76174ec962c9b0bb72852897586eb95d896d301e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-10mb/google/volteer: Pull up GPP_D16 instead of driving itCaveh Jalali
The latest realtek RTS5261 SD daughterboard exposes the PRSNT# pin to GPP_D16 but there is a RTS5261 requirement to pull up this pin and not drive it at power on. We can meet this requirement without breaking other boards by changing GPP_D16 to be a no-connect with an internal pull up. Other boards use this signal as an enable input, so changing this to pull up is OK. BUG=b:162722965 TEST=Verified RTS5261 and GL9755 daughterboards enumerate on PCI and can read SD cards. Change-Id: I096d76ec12b7c3afaf02e621fd301b6704913d5d Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-10mb/google/volteer/var/terrador: Update gpio settings for Proto2David Wu
Based on latest schematic and gpio table of terrador, update gpio settings for terrador Proto2. BUG=b:151978872 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I64b4fcbaabc487206d14d794af319e6df6f99581 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-08-10mb/tgl: Enable SaGv for TGL-UP3 RVPShreesh Chhabbi
BUG=none BRANCH=none TEST=Build and boot TGL-UP3 RVP with QS silicon successfully. Change-Id: I5b84457a1455edfe500ce80ba7f7ca6ccce43666 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43276 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10superio/ite: allow 24 MHz clock for external sensor interfaceMichael Büchler
The interface selection register of the environment controller (EC) gives the choice between "Internal generated 32 MHz" and "24 MHz" for the "SST/PECI Host Controller Clock Selection". Previously the chip was always configured for the 32 MHz clock. Add an option that can be set from devicetree.cb to allow using the 24 MHz clock. Without this setting the automatic fan control on an Acer Aspire M3800 was slow to respond to temperature changes. Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: Ib2bce10a828fb4a7d837f6c5f5b1d00cc51be0ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/44166 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10superio/ite: configure EC for fans to full at thermal limitMichael Büchler
This applies to the automatic fan control mode of the environment controller (EC). Previously the affected bit was always cleared while the default value is 1 according to datasheets. Add a variable that can be set per mainboard in devicetree.cb. In the IT8783E datasheet that bit is marked as reserved. Signed-off-by: Michael Büchler <michael.buechler@posteo.net> Change-Id: Ie74102ac0d54be33558c161c9c84594d121772b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-08-10mb/lippert: Put files under variants/Angel Pons
This isn't reproducible for some reason, but it is relatively simple. Change-Id: I507229be71ac2c589c7ecd81495d38ce363d26a7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43275 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10mb/lippert: Unify mainboardsAngel Pons
Do it quick and dirty but in a reproducible manner. Variants will be set up properly in subsequent commits. Tested with BUILD_TIMELESS=1, both Lippert FrontRunner-AF and Toucan-AF remain identical. Change-Id: I71ff50099787e7806a9ab67429890a1c77061929 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43274 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-10soc/intel/apollolake: Rename UART irqsPatrick Rudolph
Use the same names as on other intel socs. Will be used in intel common uart driver. Change-Id: Ia418fefb3f925fe4d000683b5028682cf0b68a9b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-10soc/intel/apollolake: Add irq.hPatrick Rudolph
Move defines from soc_int.asl to soc/irq.h. The common code uart driver expect it to exist. Change-Id: I000a041120daa8cbe1ca4e4aab48a206bb3e9245 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-10soc/intel/cannonlake/acpi/serialio.asl: Don't advertise unavailable devicesPatrick Rudolph
On PCH-H the I2C4 0:19.0 device isn't usable and thus 0:19.1 and 0:19.2 can't be detected using standard PCI probing. Remove I2C4, I2C5 and UART2 from generic ASL code on PCH-H platforms that advertise its PCI conformance by the _ADR attribute. Change-Id: I89f9ab7d4afb2e7d1b1e24d072adf99e0da6fecf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-10soc/intel/common: Include Alder Lake SATA controller device IDsSubrata Banik
Document Number: 619501, 619362 Change-Id: Id3440b415ca80edebb6880b8b48f6094ebea4ae4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-09soc/intel/{icl.tgl,jsl}: Remove SMRAM register programmingAamir Bohra
SA SMRAMC register PCI offset 0x88 is deprecated for ICL, JSL and TGL. Removing the register programming for these platforms. The write to this register does not take effect and remains configured to 0, even when programmed. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I3f581b90ea99012980f439a7914e8d901585b004 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-083rdparty/intel-microcode: Update submodule to 20200616 releaseAngel Pons
Change-Id: Ia250765e2cb81d6a39ad00ebbab20e7b87fa42d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43758 Reviewed-by: Michael Niewöhner Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-08vendorcode/intel/fsp/fsp2_0/CPX-SP: update to ww32 release and adapt socJonathan Zhang
Intel CPX-SP ww32 release has a number of bug fixes: a. It fixed the issue related to some PCIe ports being hidden. This affected DeltaLake config A, made the onboard PCIe NIC device not working. ww32 release added two UPD parameters: PEXPHIDE, HidePEXPMenu. b. It fixed the regression related to MRC cache. c. It fixed the issue related to VT-d support, and added X2apic UPD paramter. A separate PR will be submitted to enable VT-d in coreboot. d. It fixed the issue related to enabling thermal device with PCI or ACPI mode. [CB:44075] was submitted to enable it in coreboot. e. It fixed the issue of FSP log level change UPD parameter DebugPrintLevel not working. There is a change in IIO UDS Hob. TESTED=booted YV3 config A, and rebooted it. Access the target OS remotely. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Iaffcb9d635f185f9dd6d6fbe4457549984a993a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-08mb/google/zork/trembyle: comment why USB OC pin mapping is differentFelix Held
Change-Id: I68b7529733e604ac45919a54e094be7eeb044458 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-08soc/intel/skylake: Enable CIO depending on devicetree configurationFelix Singer
Currently, CIO gets enabled by the option Cio2Enable, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the CIO controller. All corresponding mainboards were checked if the devicetree configuration matches the Cio2Enable setting, and missing entries were added. Change-Id: I65e2cceb65add66e3cb3de7071b1a3cc967ab291 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-08soc/intel/skylake: Enable SA IMGU depending on devicetree configurationFelix Singer
Currently, SA IMGU gets enabled by the option SaImguEnable, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the SA IMGU controller. All corresponding mainboards were checked if the devicetree configuration matches the SaImguEnable setting, and missing entries were added. Change-Id: I293a20a321c75f82a57cbd5339656d93509b7aa6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-08soc/intel/skylake: Add IMGU definitions to pci_devs.hFelix Singer
Change-Id: Iee7393ae7e2aca94151c242894c64ac902f4d437 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
Currently, SDXC gets enabled by the option ScsSdCardEnabled, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the SDXC controller. All corresponding mainboards were checked if the devicetree configuration matches the ScsSdCardEnabled setting, and missing entries were added. Change-Id: I298b7d0b0fe2a7346dbadcea4be22dc67fce4de8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-08mb/asrock/h110m: remove unused Device4Enable from devtreeMaxim Polyakov
This option has been removed from the parameters structure for Intel Skylake CPU (commit 9c1c009). Change-Id: I9dc6649ad693d18fdc85046ebbcc730a17fed0bf Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner
2020-08-08soc/mediatek/mt8192: Add initial config for new ARMv8 device MT8192CK Hu
Add MT8192 address map, memlayout and first Kconfig. MT8192 is similar to MT8183. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I4e34c03a11a77ed98674ffd8eeddb20ef5fea89d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43957 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OSMartin Roth
This reverts the code from commit 728c0787f2 that removes the reset GPIO from the touchscreen ACPI interface. That patch exposes a bug which leads to an invalid opcode trap in the touchscreen code. Reverting this gets the system working again, but is not a long-term solution. BUG=b:162596241 TEST=System boots to login screen. Change-Id: I57a070d94f961cec43834c8bedd5dafc8a54171a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43078 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
Currently SA thermal subsystem gets enabled by the option Device4Enable, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the SA thermal subsystem controller. All corresponding mainboards were checked if the devicetree configuration matches the Device4Enable setting, and missing entries were added. Change-Id: I7553716d52743c3e8d82891b2de14c52c6d8ef16 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44026 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/skylake: Add SA thermal subsystem definitions to pci_devs.hFelix Singer
Change-Id: Ic83cfbe2a715db317d94c2b9c6cdd8c58a43612f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-07soc/intel/cnl: Set Heci1Disable depending on devicetree configFelix Singer
Currently HECI1 gets enabled by the option HeciEnabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement/disablement of the HECI1 device. All corresponding mainboards were checked if the devicetree matches the HeciEnabled setting, and adjusted where necessary. Change-Id: I03dd3577fbe3f68b0abc2d196d016a4d26d88ce5 Signed-off-by: Felix Singer <felix.singer@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-07soc/amd/picasso/acpi: remove AOAC device enables from global NVSFelix Held
These values in GNVS are written, but never read/used. aoac.asl contains proper ACPI power management functions for the AOAC devices that directly access the state from the device's registers instead of relying on cached values in GNVS, so the corresponding GNVS entries can be dropped. BUG=b:161165393 TEST=Mandolin still boots and dmesg shows no new ACPI errors. Change-Id: Iee78df215308bd9b656228be787fac121d10ca99 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44245 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07xeon_sp/cpx: Enable HWP Intel Speed ShiftJohnny Lin
Set HWP base feature, enable EPP, lock thermal interrupt and lock MSR Tested=On OCP Delta Lake, rdmsr 0x1aa shows 403040 Change-Id: I6d23de4032562095db1aaf96ddfd2b70a4517faa Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44171 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/broadwell/iobp: Log success in `pch_iobp_write()`Angel Pons
This reduces the differences between Lynxpoint and Broadwell. Change-Id: I759aa98b80c70c5024213bd8795375061bdbbf10 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42622 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07security/intel/txt: Fix variable MTRR handlingAngel Pons
The MSR macros were treated as memory addresses and the loops had off-by-one errors. This resulted in a CPU exception before GETSEC, and another exception after GETSEC (once the first exception was fixed). Tested on Asrock B85M Pro4, ACM complains about the missing TPM and resets the platform. When the `getsec` instruction is commented-out, the board is able to boot normally, without any exceptions nor corruption. Change-Id: Ib5d23cf9885401f3ec69b0f14cea7bad77eee19a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-08-07sb/intel/lynxpoint: Use PCI bitwise opsAngel Pons
Some cases could not be factored out while keeping reproducibility. Also mark some potential bugs with a FIXME comment, since fixing them while also keeping the binary unchanged is pretty much impossible. Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change. Change-Id: I27d6aaa59e12a337f80a6d3387cc9c8ae5949384 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42154 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07configs/config.asrock_b85m_pro4...: Select GL9763E driverAngel Pons
This allows build-testing the code while it isn't used anywhere. Change-Id: Ib0b78cf874ab28d2b6ed687c1a63bcca3d788d2c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-07sb/intel/lynxpoint: Consider root ports being disabled by strapAngel Pons
PCIe RPC (Root Port Configuration) straps will force-disable some root port functions if some root ports have a width greater than x1. In two cases, this affects the last function. The PCIe init code will never finish configuring the root ports if that is the case: it assumes that the last function will eventually run through the code, but it doesn't. If PCIe initialization does not complete, pressing the power button will not power off the board, unless it is held for about five seconds. Also, Windows 10 will show a BSOD about MACHINE CHECK EXCEPTION, and lock up instead of rebooting. Depending on the microcode version, the BSOD may not be visible. This happens even when the root port is not populated. Use the strap fuse configuration value to know which configuration the PCH is strapped to. If needed, update the number of ports accordingly. In addition, print the updated value to ease debugging PCIe init code. Existing code in coreboot disagrees with public documentation about the root port width straps. Assume existing code is correct and document these assumptions in a table, as an explanation for the added code. Tested on Asrock B85M Pro4, PCIe initialization completes successfully. Change-Id: Id6da3a1f45467f00002a5ed41df8650f4a74eeba Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44155 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/elmex/pcm205401: Add comment about the codeAngel Pons
It's not missing, it's just not where one expects it to be. Change-Id: I377b68cbdc9266048074dc326490750777a6fbf5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43291 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/asrock/b85m_pro4: Support LPC TPMAngel Pons
This mainboard has a 18-pin LPC header, where one can plug in a TPM. Untested, as I don't have a TPM. Change-Id: I14a159c373987d8b12fde18f327a9eb387c01de8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-08-07security/intel/txt: Allow using CF9 reset, tooAngel Pons
Soften the hard dependency on SOC_INTEL_COMMON_BLOCK_SA by allowing CF9 resets to be used in place of global resets. If both types of reset are available, prefer a global reset. This preserves current behavior, and allows more platforms to use the TXT support code, such as Haswell. Change-Id: I034fa0b342135e7101c21646be8fd6b5d3252d9e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-08-07mb/intel/kblrvp: Factor out `IoBufferOwnership`Angel Pons
RVP11 and RVP3 set it to zero, the other two omit the setting. Tested with BUILD_TIMELESS=1, all four variants do not change. Change-Id: I6b393f0f2269f62b415456c17ba5962f46a1c5d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43909 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/intel/kblrvp: Factor out `HeciEnabled`Angel Pons
RVP8 does not set it, and the other variants set it to zero. So, factor it out. Tested with BUILD_TIMELESS=1, all four variants do not change. Change-Id: I67c958af2dc955d07b895dc93fbe2232dbd48d34 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43908 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07soc/intel/common: Log CSE FW Status Registers before triggering recoverySridhar Siricilla
The patch logs CSE Firmware Status Registers(FWSTS1, FWSTS2 & FWSTS3) before triggering recovery to help debugging. BUG=b:159962240 Test=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I90e9f5897408bfc37a69cf0bb23bff18a146b9e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43537 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07mb/google/volteer: support variant defined spd pathsNick Vaccaro
Allow variants to override the SPD_SOURCE_PATH to allow supporting different types of DDR. BUG=b:163065661 TEST="emerge-volteer coreboot" and verify all variants build. Change-Id: Id52e651848548a783d6d9f57e88f6099425b063e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-08-07soc/intel/{cnl,icl,jsl,tgl}: Use Bus Master for setting up PWRMBASESubrata Banik
In 'bootblock/pch.c', clear PCI_COMMAND_MASTER (BIT 2) prior to programming PWRMBASE and enable BIT 2 after programming PWRMBASE along with PCI_COMMAND_MEMORY (BIT 1). Also perform below operations 1. Use pci_and_config16 instead of pci read and write 2. Use setbits32 instead of mmio read and write Change-Id: I7a148c718d7d2b618ad6e33d6cec11bd0bce0937 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-07Revert "mb/google/volteer/var/halvor: Update dq/dqs mappings"Paul Fagerburg
This reverts commit 3d813cbede650a89a519d5896652328e4ecf88c6. Reason for revert: the CL made the build unstable. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: I9d067eb13196ff7d537d557d8ff864b1572a3b04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43076 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-07src/soc/intel/icelake: Allow option to use USE_INTEL_FSP_MP_INITSubrata Banik
This patch removes the unnecessary enforcement of MP PPI in ICL in order to have parity with other IA-SoC. Now it allows user to select USE_INTEL_FSP_MP_INIT if required. TEST=Able to build and boot ICL platform with either USE_INTEL_FSP_MP_INIT or USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI selected. Change-Id: I25288a24cdf9dceec45a90e4e7233225a6cab508 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 01:57:30 +0000