Age | Commit message (Collapse) | Author |
|
This patch moves uart functions which are common across multiple soc to
block/uart. This will remove redundant code copy from soc
{skylake/apollolake/cannonlake}.
BUG=b:78109109
BRANCH=none
TEST=Build and boot on KBL/APL/CNL platform.
Change-Id: I109d0e5c942e499cb763bde47cb7d53dfbf5cef6
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/26164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This is meant to solve an issue where the proximity sensor may fluctuate
between CLOSE / FAR in rapid succession upon the user removing their hand
from the unit, before settling on the correct output.
Using the hardware debouncing filter solves this issue and removes the
spurious fluctuations.
BRANCH=None
BUG=None
TEST=manual on Nocturne, observing events come in
Change-Id: I78cc4852d42fcda6209fedce1ce91236b5814571
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-on: https://review.coreboot.org/28112
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are two SKUs of Whiskey Lake W0, 2-core and 4-core.
Change-Id: Ia9b2707568702a5fbae3e9495ca53df34613a542
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Reviewed-on: https://review.coreboot.org/28111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
When USB OTG is set, GLK FSP enables xHCI SW ID pin and configures
USB-C as device mode. Force USB-C into host mode.
BUG=b:111623911
TEST=Verified that USB-C being host mode once USB OTG is set.
Change-Id: Iaca3d25a1159f922b743963cbc508d8defa7b6ff
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/27746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Weida touchscreen controller needs 130 ms delay after reset
BUG=b:111102092
BRANCH=master
TEST=Verify touchscreen on fleex works with this change
Change-Id: Ia86c3acf3c0e09ca05cc1681113672b546f830a0
Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/28115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
`superiotool` follows its own style (e.g. lot's of missing spaces
and odd placement of braces in the register descriptions).
Change-Id: Ifa33938a0fbac10577cbda10537f856f6f100233
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28214
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2075142a0b241222839899e707a1e3d264746432
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/28228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Callers should have a default ready and get noticed by the return
value of get_option(). No need to scare log readers at this location.
Change-Id: Ied373d8a02afdc8d1017c9f41d9004e3797dfbb3
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/28215
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic6e7341b53bcabc415089ccfab121d3694ccb071
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/28212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The DIMM type read from SPD needs to be converted to make sure SMBIOS fills
in the correct formfactor.
Tested on Lenovo T430: The Form Factor no longer reads as unknown.
Change-Id: Ia0211fa133f4ba9d60dfbd5f0dd45a43df68c030
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/28192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fill in SMBIOS type 17 DIMM serial number, read from SPD.
Fixes FWTS SMBIOS type 17 test.
Change-Id: Id6e818bfdf4af0fd34af56dc23df052a3f8c348d
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/28191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
src/soc/intel/common/block/cpu/mp_init.c
Function init_cpus: Pointer dev checked for NULL may be
dereferenced.
src/soc/intel/common/block/graphics/graphics.c
Function graphics_get_bar: Pointer dev returned from
call may be NULL and will be dereferenced.
BRANCH=None
TEST=Built & booted Yorp board.
Change-Id: I5e7caa15a3911e05ff346d338493673af5318a51
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/28060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I4b0577bf3c00307733a1096749c1835d86764f29
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ib5799cceacefa89385a7615ef1c4b4d06157044f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Make the code simpler and improve readability.
Change-Id: Ifa9308c32e4646c122254931b55fb83541a10a3c
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/28195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The help text is already very clear but some users (first and
foremost the author of this patch ;) are still selecting
USBDEBUG_DONGLE_BEAGLEBONE when using a BeagleBone Black and
waste hours on analyzing the debug output of EHCI debug driver.
Change-Id: Ibf002db7d81ed44878f3ce0324170e4b99e780a5
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/28184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix scope of ResourceSource, which should match the scope of the
device itself.
Change-Id: I9d0ff0ecc2721ec55b1ed12dddb495cd55966daf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/28114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
All different memory configuration should be supported by now.
Thanks to Igor Lee.
Change-Id: Ib93c0e3cbdc29cbf6cff26292df4fbbb8208082f
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: Igor Lee <getrun@gmail.com>
Reviewed-on: https://review.coreboot.org/27781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The romstage main() entry point on arm64 boards is usually in mainboard
code, but there are a handful of lines that are always needed in there
and not really mainboard specific (or chipset specific). We keep arguing
every once in a while that this isn't ideal, so rather than arguing any
longer let's just fix it. This patch moves the main() function into arch
code with callbacks that the platform can hook into. (This approach can
probably be expanded onto other architectures, so when that happens this
file should move into src/lib.)
Tested on Cheza and Kevin. I think the approach is straight-forward
enough that we can take this without testing every board. (Note that in
a few cases, this delays some platform-specific calls until after
console_init() and exception_init()... since these functions don't
really take that long, especially if there is no serial console
configured, I don't expect this to cause any issues.)
Change-Id: I7503acafebabed00dfeedb00b1354a26c536f0fe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/28199
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Build tests:
* Option table
* Static option table
* Verbose debugging code
* Sandy Bridge optional Kconfigs
* TPM debugging code
* Lenovo Bluetooth on Wifi
* Libgfxinit on Sandy Bridge
Change-Id: Ib463f578c97a212d0729aa6f54b7b6fba33e0478
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/28118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Iddea8cc71dc1fb33d46b22dd19e39bf1c1257555
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/28117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
In preparation to removing AmdLib, replace function LibAmdLocateImage()
with its ported version find_image().
BUG=b:112625809
TEST=Build and boot grunt.
Change-Id: I75ddd55f7e3e7f2cd7914f97c99b62690ae70660
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28164
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In preparation to removing AmdLib, function LibAmdLocateImage() has to be
ported to be used by agesawrapper. The most important aspect of this porting
is that it has to obey coreboot format, specifically 8 character tab and 80
characters max. This required breaking the function in 2 (to solve
indentation) and rename some variables to shorter names.
One important aspect was breaking
(AMD_MODULE_HEADER*)(((AMD_IMAGE_HEADER *) CurrentPtr)->ModuleInfoOffset)
into:
image_ptr = (AMD_IMAGE_HEADER *) current_ptr;
if (validate_image((void *)image_ptr->ModuleInfoOffset,
and, within validate_image completed by:
AMD_MODULE_HEADER *mod_ptr = (AMD_MODULE_HEADER *)module_chain;
BUG=b:112625809
TEST=Build grunt, functionality tested in next commit.
Change-Id: I0d1e8b966cf7606fdb15a95de5771f835f07b2bc
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
After adjustment on Careena EVT
TP: 400.0 KHz
TS: 396.8 KHz
H1: 396.8 KHz
BUG=b:112663934,b:112664258
BRANCH=master
TEST=emerge-grunt coreboot
measure by scope
Change-Id: I9eeaf9290d95969a283f14618878e28faf0ea46f
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/28119
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix the following Error:
FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line
142
Line | AML source
--------------------------------------------------------------------------------
00139|
00140| Scope (\_SB.PCI0.IGFX)
00141| {
00142| Method (_ROM, 2, NotSerialized) // _ROM: Read-Only Memory
| ^
| Remark 2120: Control Method should be made Serialized (due to creation of named objects within)
00143| {
00144| OperationRegion (ROMS, SystemMemory, 0xCD520000, 0xFE00)
00145| Field (ROMS, AnyAcc, NoLock, Preserve)
================================================================================
ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is
created inside a non-serialized method - this method should be serialized. It is
possible that one thread enters the method and blocks and then a second thread
also executes the method, ending up in two attempts to create the object and
causing a failure.
Use the acpigen_write_method_serialized() to correct the error.
BUG=b:112476331
TEST=Run FWTS.
Change-Id: I145c3c3103efb4a02b4e02dd177f4bf50a2c7b3e
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Fix the following FWTS error:
FAILED [MEDIUM] AMLAsmASL_MSG_RETURN_TYPES: Test 1, Assembler warning in line
3038
Line | AML source
--------------------------------------------------------------------------------
03035| Return (One)
03036| }
03037|
03038| Method (_Q09, 0, NotSerialized) // _Qxx: EC Query
| ^
| Warning 3115: Not all control paths return a value (_Q09)
03039| {
03040| If (Acquire (PATM, 0x03E8))
03041| {
================================================================================
ADVICE: (for Warning #3115, ASL_MSG_RETURN_TYPES): Some of the execution paths
do not return a value. All control paths that return must return a value
otherwise unexpected behaviour may occur. This error occurs because a branch on
an conditional op-code returns a value and another does not, which is
inconsistent behaviour.
_Q09 is a reserved method and can't return a value. Change the logic
so that no return is used and avoid this test error.
BUG=b:112476331
TEST=Run FWTS.
Change-Id: Ibbda1649ec2eb9cdf9966d4ec92bfd203bb78d07
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Fix the following failure from FWTS:
FAILED [LOW] AMLAsmASL_MSG_SERIALIZED_REQUIRED: Test 1, Assembler remark in line
131
Line | AML source
--------------------------------------------------------------------------------
00128| }
00129| }
00130| })
00131| Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
| ^
| Remark 2120: Control Method should be made Serialized (due to creation of named objects within)
00132| {
00133| Name (RBUF, ResourceTemplate ()
00134| {
================================================================================
ADVICE: (for Remark #2120, ASL_MSG_SERIALIZED_REQUIRED): A named object is
created inside a non-serialized method - this method should be serialized. It is
possible that one thread enters the method and blocks and then a second thread
also executes the method, ending up in two attempts to create the object and
causing a failure.
BUG=b:112476331
TEST= Run FWTS.
Change-Id: I6f4f6e7e94b01f673afc97d9415481ee63e406e3
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28122
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix the IASL build warnings:
Object is not referenced (Name [CDW2] is within a method [_OSC])
Object is not referenced (Name [CDW3] is within a method [_OSC])
Remove the not referenced objects. They are not needed.
BUG=b:112476331
TEST=IASL doesn't give the warning.
Change-Id: I5b38d4de3f9875c5b013a49eb5146bf5916b96a6
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/28121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change adds some MSRs that are needed in a subsequent change to add
support for Continuous Performance Control.
Change-Id: Id4ecff1bc5eedaa90b41de526b9a2e61992ac296
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/28067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change adds 2 methods for Conginuous Performance Control that was
added in ACPI 5.0 and expanded twice in later versions. One function
will create a global table based on a provided struct, while the other
function is used to add a _CPC method in each processor object.
Change-Id: I8798a4c72c681b960087ed65668f01b2ca77d2ce
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/28066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The existing code for modifying the power state after power loss of the system
only implemented the transitions from power off to either power on or power keep
properly.
Since I don't have a board with this chip, I couldn't test the patch on real
hardware. The two cases described above were tested before the original patch
was merged, so I'd expect this to work.
Change-Id: I3c26a2837e451dbfd3cee82e9beedc0f4a90af03
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update SPD details to match with Coffeelake U RVP board
BUG=none
BRANCH=none
TEST=Boot on coffelake U rvp board and check if memory training is
passing and board boots till payload.
Change-Id: I953354cf5c6045731262f4f4e9da230187c2d246
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/27906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Update GPIO table as per board schematics.
GPIO table for other variants will be added later.
Change-Id: Ieb55d160ae2d6bff940840b1fba9411979332d4d
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/27907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
|
|
Nami doesn't support wakeup from hibernation by CR50. This causes the
device to remain turned off after CR50 update.
This patch disables turning off EC on cr50 update. CR50 resets the
whole system. So, EC reset is not required.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
BUG=b:112604277
BRANCH=none
TEST=gsctool -a -u /media/removable/cr50.bin && reboot
Verify EC reboots. AP prints 'Waiting for CR50 reset to pick up update'
then reboots.
Change-Id: I06f5eb6100e8af6ffec45d4de2b40eff44f89709
Reviewed-on: https://review.coreboot.org/28113
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch allows boards to disable turning off EC on cr50 update.
If CR50 resets the whole system, an EC reset is not required.
BUG=b:112604277
BRANCH=none
TEST=gsctool -a -u /media/removable/cr50.bin && reboot
Verify EC reboots. AP prints 'Waiting for CR50 reset to pick up update'
then reboots.
Change-Id: I60a7aa50a549e7a5a1a114245fbf7b9646d813bb
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/28110
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The only board left in the tree (aopen/dxplplusu) with
this socket is the slower of the mPGA604 variants with
FSB 533.
Change-Id: I04707a0dcb8f5b6235ead8c02ddfddfe7c3b8b1b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/28116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This change permits the subsystem ID to be specified via Kconfig for the
devices on the SoC.
Some devices are getting zero'ed subsystem IDs because the unset (and thus
zero'ed) config options are overwriting the fsp defaults. With this change
the fsp defaults will only be overwritten by non-zero config values.
Change-Id: I0f7bb8e465f55e5dd6d8e0fad71b9b2a22f089dc
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/27609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Header files AcpiLib.h, FchDef.h and FchBiosRamUsage.h became obsolete when
VENDORCODE_FULL_SUPPORT was removed. Therefor they should be removed.
BUG=b:112602580
TEST=Build grunt and gardenia.
Change-Id: If4fdb9ae1e106ba15f2a073f592499e638e40c65
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28093
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I13c5464cd0b5bc9c21d7b4831a0b7fdd9fbc85c6
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: If7650ac4d9be2614a9665c7f2aba9ac5cc413efe
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These files are being updated to match the prevailing style
of cmos.default files.
Change-Id: I47d31d6fec8c9eb856aed0c63824d9556b7705e4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
change I2C irq to EDGE trigger
BUG=b:112616824
BRANCH=master
TEST=emerge-grunt coreboot
Raydium TS is working.
Change-Id: I86ec32bb3f2626e65d76c3259e3c4244a970e5de
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/28095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The specification updates for ICH 9 & 10 require to leave the
register in its default state by reserving all of its bits.
Writing to it does not seem to make a difference anyway since
reading it afterwards does not reflect the write (tested on ICH10).
Therefore we should omit the writes but document this fact in the
code because it is easy to miss from the datasheet alone.
Change-Id: Iec0d79f926a826a80b90907f7861d0cb2ca30a5b
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/28094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Print the PMxC0 S5/Reset status bits to the console.
TEST=Inspect console for Grunt
BUG=b:110788201
Change-Id: Ia905bb325a535fd4aa7082011cdfe92f08dff2cb
Signed-off-by: Edward Hill <ecgh@chromium.org>
Reviewed-on: https://review.coreboot.org/28020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Used default console log level is 7 in src/console/Kconfig.
So let cmos.default use the same level as default.
Change-Id: Ia39ee457a8985142f6e7a674532995b11cb52198
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
All of the callers to acpigen_write_register() also make calls to
acpigen_write_resourcetemplate_[header|footer](). This change introduces
acpigen_write_register_resource() to unify all of those trio of calls
into one. I also made the input parameter const.
Change-Id: I10b336acf9f03c423bee9dc38955b1617e11c025
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/27672
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove VENDORCODE_FULL_SUPPORT from /soc/amd/stoneyridge/Kconfig and
from vendorcode/amd/pi/00670F00/Makefile.inc, thus completing the removal
of VENDORCODE_FULL_SUPPORT from coreboot.
BUG=b:112578491
TEST=none, VENDORCODE_FULL_SUPPORT already not used.
Change-Id: Idb5f6dc7add1617f7a97a97ae110901b2dec0996
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove VENDORCODE_FULL_SUPPORT from file above mentioned file, in
preparation to full removal of VENDORCODE_FULL_SUPPORT functions.
BUG=b:112578491
TEST=none, VENDORCODE_FULL_SUPPORT already not used.
Change-Id: Ic23dcf245b2cee24f7363ca3bb9918eb2f11179c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove VENDORCODE_FULL_SUPPORT from file above mentioned file, in
preparation to full removal of VENDORCODE_FULL_SUPPORT functions.
BUG=b:112578491
TEST=none, VENDORCODE_FULL_SUPPORT already not used.
Change-Id: Id91e76282509743070e34c02082d3f3f46a14059
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove VENDORCODE_FULL_SUPPORT from file:
vendorcode/amd/pi/00670F00/Proc/Psp/PspBaseLib/PspBaseLib.c
BUG=b:112578491
TEST=none, VENDORCODE_FULL_SUPPORT already not used.
Change-Id: I0d590b175a3cf0426580dc9ee5164b3cedc838e2
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/28089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|