summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-06mb/google/poppy/variants/rammus: add audio, mic and codec configurationZhuohao Lee
Rammus uses DA7219 Headset, Maxim MAX98927 Smart Amps and 4 channel dmic BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: If21a3870ee4b000a776d2f3e025fb43ef2fe48c7 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mb/google/poppy/variants/rammus: change build directory to rammusZhuohao Lee
Move the build board directory from poppy to rammus. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: I3a9fc2bbfe7261661f0c5c073baff0ff1434d09f Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-06mp_init: fix typoRaul E Rangel
BUG=none TEST=none Change-Id: Ic2d7bf5f5335894ede98dc7e6cc6a65e4897e487 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06mb/google/kahlee: Disable SATA in all boardsRichard Spiegel
Kahlee based boards don't use SATA, so disable SATA on all boards to save power. BUG=b:112139043 TEST=Build and boot grunt, checked the absence of SATA PCI. Change-Id: I6a12c03a5a95b1c8b40609a3fe656df92548b80b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06soc/amd/stoneyridge: Disable SATA based on devicetree settingRichard Spiegel
Grunt boards don't use SATA, so it should be disabled to save power. Check if SATA is enabled in devicetree, and enable/disable the device based on that setting. BUG=b:112139043 TEST=Buil and boot grunt, checked the absence of SATA PCI. Change-Id: I4a3b5f65e612e8da5bedff0c557a0850f350dfa8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-05southbridge/intel/bd82x6x/Kconfig: Do not include any IFD by defaultAngel Pons
Since only a handful of boards have descriptor blobs in the tree, it makes no sense to have `HAVE_IFD_BIN` enabled by default then disabled on each mainboard. This patch flips the default value of said variable, rendering all current overrides unnecessary. The few boards which have an IFD in the blobs repo use `select HAVE_IFD_BIN` to enable adding the IFD by default. Since `HAVE_ME_BIN` depends on `HAVE_IFD_BIN`, the former has been removed alongside the latter, and has been added to the boards with a ME blob as `select HAVE_ME_BIN`. Both `HAVE_IFD_BIN` and `HAVE_ME_BIN` have been removed from autoport as well. Change-Id: I330c4886f8bea4b1a8ecad6505a0e5cc381654d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04x4x/raminit_ddr23: use MCHBAR AND/OR/AND_OR macros [2/2]Felix Held
This patch contains the parts that changed the hash of the generated binary; probably due to the compiler optimizing things slightly different. Change-Id: I3233ba1747dcf5ad05b2ad771a86e3936f655d1c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: remove read_mchbar functionsFelix Held
Change-Id: I7935cc166aa39f4053f45eef925d92ce50fd98ba Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: clean up code and remove write_mchbar functionsFelix Held
This part of the cleanup patches changes the hash of the output binary; likely due to the compiler optimizing things differently. Change-Id: I1a22f6216a75e2b463d4e169e97ad6e0bbaafae8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27708 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04northbridge/nehalem: add MCHBAR8/16 AND_OR macrosFelix Held
Change-Id: I62e4a8610689e72944e1a9c020f13a47d402c136 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: clean up code and use MCHBAR macrosFelix Held
On a a timeless build with coreboot i386 crossgcc 6.3.0, this doesn't change the hash of the output binary. Change-Id: I15e09320e72cffb8a2617eca0cfe40780f74bece Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27707 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04nehalem/raminit: remove REAL define and most dead codeFelix Held
The code only compiled when REAL was set to 1; the other case included an unpublished include. Change-Id: I7f31e9cd02f45492d6c9e88ec6164a537ca5e3c2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27706 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04mb/pcengines/apu2: turn LED 2 and LED 3 off in final stageMichał Żygowski
Due to vendor's requirements LED 2 and LED 3 should be turned off in late boot process. Add appropriate functions to read and write GPIO status. Change-Id: Ia286ef7d02cfcefacf0e8d358847406efe1496fb Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04mb/pcengines/apu2: change GPIO settingMichał Żygowski
Change GPIO setting to use IOMUX to refer to GPIO by IOMUX register as in BKDG for Family 16h Models 30h-3fh Processor Rev 3.06. Change-Id: Icf4a60acabe65cd7f9985bb3af8bd577764d4196 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/27665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-04drvs/intel/gma/acpi: Add methods to use MBOX3Patrick Rudolph
* Add Mailbox 3 driver * Request brightness change through Mailbox 3 * Return Ones on error or if unsupported * Mark existing code as legacy (still required if no GMA driver is running) * Call legacy code if Mailbox 3 is unsupported, on error or if gma driver isn't running Tested on Lenovo T430: * Brightness control still works * Brightness is the same on S3 resume Change-Id: I51554c819148336b204d28972cbf775a10c3fb8a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/27711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-by: Nicola Corna <nicola@corna.info> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03security/tpm: Improve TCPA log generationPhilipp Deppenwiese
* Make tcpa_log_init static and move init code into the tcpa_log_add_table_entry routine. * Add more checks for log initialization. * Fix minor issues Change-Id: I215d79eed7ad17c6ab87f0c4b14a282e519ef07d Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/27769 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03gpio: Change gpio_baseX_value() function return types to unsignedJulius Werner
This patch changes the return type of gpio_base2_value() and related functions from int to uint32_t. This makes more sense now that board_id() and related functions (which are the primary use case) also return that type. It's unlikely that we'll ever read a strapping of 32 GPIOs in a row, but if we did, we'd probably want to treat it as unsigned. Change-Id: I8fb7e3a7c76cb886aed40d0ada1f545180e43117 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03southbridge/intel: Remove leftover TPM ACPI codePhilipp Deppenwiese
Remove ACPI code which isn't necessary anymore due to the LPC TPM ACPI generator. Change-Id: I2fae286d61ec7c1036d1a8fa800dc8d9603252e9 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/27767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03soc/amd/common: Remove PSPP override settingMarc Jones
For some reason the PSPP setting was being overwritten in the common code. Remove the setting and allow the oem customize function to make the setting. BUG=b:112020107 TEST= build test Change-Id: If7f4511a71f725fedd60d33552656850e50d955d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-03mainboard: Add ASUS P8H61-M LXTristan Corrick
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with kernel 4.9. This code is based on the output of autoport. The file `data.vbt` matches the VBT in the latest version of the vendor firmware (version 4601). This board works well under coreboot. A list of what works and what doesn't can be found in the documentation part of this commit. To summarise: the only known issues are that S3 suspend/resume doesn't work, and that there is no automatic fan control via the super I/O. Change-Id: I2a0579f486d3a44de2dd927fa1e76b90c3b48f62 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/nuvoton/nct6776/acpi: Add PS/2 mouse supportTristan Corrick
By defining SUPERIO_KBC_PS2M, ACPI code is added to show the PS/2 mouse. This has been tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. In each case, the PS/2 mouse works automatically, whereas it was not detected before. Change-Id: I7983f85b3fd23547950f1f75a81bbca63c63d52b Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03superio/acpi: Make _CRS methods Serialized, eliminating IASL remarksTristan Corrick
When compiling for the ASUS P8H61-M LX, IASL 20180531 emits the following remark: "Control Method should be made Serialized (due to creation of named objects within)". Making the appropriate methods Serialized eliminates these remarks. Change-Id: I8e95d9a00a629a2f904c79b78fac20810327ed37 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27796 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03superio/nuvoton/nct6776/acpi: Add parallel port supportTristan Corrick
Exposing the parallel port via ACPI causes Linux to automatically detect the parallel port and load the appropriate modules. Tested on an ASUS P8H61-M LX with Linux 4.9.110 and 4.17.8. However, no parallel port device has been tested. Change-Id: I2529a074e24433d093ad0650a45c7b29238620f3 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03sandybridge/raminit_mrc: remove reference to report_platform_info()Matt DeVillier
Commit ef8c559e537ed10d8054ca6a72ca50e0531fde95 [nb/intel/sandybridge/report_platform: Move remaining code to sb folder] moved reporting code to the southbridge, but missed a reference in the non-default MRC raminit path (so testing missed it). Remove invalid reference to fix compilation error. Test: build google/link with MRC raminit option selected Change-Id: I270a95ac53fbc9f8792f375908cf91585261f6a1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-03superio/nuvoton/nct6776/acpi: Fix typo in commentsTristan Corrick
The constant used in the ACPI code is NCT6776_SHOW_KBC, so update the comments to reflect that. Change-Id: I9ba69384866088f84a516557d76864104a024968 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/27794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-03cpu/x86/lapic/apic_timer.c: Compile the same code for all stagesArthur Heymans
timer_monotonic_get() was only compiled in a !__PRE_RAM__ environment. Clean up the code paths by employing CAR_GLOBAL for the global state which allows the same code to be used in all stages. Change-Id: I08fd1795508f76abdab1618585366bf9d06482ff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27801 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03mb/google/auron,cyan: Remove interrupt from devicetree LPC TPM chip driverMatt DeVillier
These boards require polling vs interrupts, so remove the IRQ definition to prevent it being added to the SSDT device entry. Test: Boot Linux on various auron and cyan variants, verify no error for 'TPM interrupt not working' present in kernel boot log. Change-Id: Ia1139389f075934d41e823ce5190011c90c7cc88 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-03soc/intel/cannonlake: Report Whiskey Lake infoLijian Zhao
According to #574725, report Whiskey Lake CPUID, MCH device ID and graphics device ID in bootblock stage. BUG=N/A TEST=Build and boot up whiskey lake rvp platform and check serial log to see proper CPU/MCH/GFX/PCH got recognized. Change-Id: I3fbc190e0520989d2fd4a9b3294e84d67e49b2cf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2018-08-03soc/intel/coffeelake: Add initial coffeelake supportLijian Zhao
Add coffeelake config and include path to coffeelake fsp header files. BUG=N/A TEST=Using private mainboard file can boot up on coffeelake rvp platform. Change-Id: Ide180de32a9d1896bed85b9e093963721c3d6041 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27468 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03mb/google/poppy/variants/atlas: Apply correct AC/DC loadlinesGaggery Tsai
This patch applies correct AC/DC loadline settings for Atlas from VRTT report. BUG=b:111419622 BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage and use DbC to check the AC/DC loadline settgins. Change-Id: I6e85b885a6d3a1db9a980d12f3cfc036a771422a Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27788 Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02google/cheza: Deassert USB hub reset pinJulius Werner
This patch makes sure we deassert the USB hub reset pin so the hub will work with the next board revision that drops the external pull-up. (Actual USB support comes in a later patch.) Change-Id: I1efdc3594cfa3229891d42d445a21c1739170b79 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27790 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02cheza: Add board ID, RAM code and SKU IDJulius Werner
This patch adds the required callbacks to read all strapping IDs on Cheza. Change-Id: I6437bbd03bdd00dfeedcafebabeb00b13588d052 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-02util/ectool: Handle arguments more carefullyArthur Heymans
Check if an argument is given and if not print the usage. Check if all arguments are handled by getopt and if not print the usage. Change-Id: I40dbd2a51d018eb549e9b2fa4365b3e4f9355bff Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Evgeny Zinoviev <me@ch1p.com>
2018-08-02util/cbmem: Handle arguments more carefullyArthur Heymans
Check if all arguments are handled by getopt and if not print the usage. Change-Id: Iccbb65ca768a62791af54afd9b7903495bc690af Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-02mb/lenovo/x1_carbon_gen1: add vbtAlexander Couzens
Extracted from live running Thinkpad x1 carbon gen1 with vendor firmware. Thanks to Igor Lee. Change-Id: Id59517d9040c98e67a42fbce537f42f6b0c6db2d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: Igor Lee <getrun@gmail.com> Reviewed-on: https://review.coreboot.org/27782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-02mb/google/poppy/variants/nami: Tune Fan speedSumeet Pawnikar
Tuning of fan speed for different temperature values. Earlier while running few benchmarks, fan was always getting on and starting at higher speed. With this change fan will start with lower speed and slowly speed gets increased if temperature continue going high. Thermal team provided these data after fine tuning of fan speed. BUG=None. TEST=Verified on Nami running with different benchmarks and observed fan speed. Change-Id: Ic3be9e44deef9570200c71807a2ee712d9f20876 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/27683 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02mb/google/poppy/variants/nami: Enable mbox command for ISL VR c-state issueShelley Chen
There is a potential IMVP8 issue for KBL that affects Intersil VRs Nami is using one of the affected parts. The fix is to use an updated microcode and also send a mailbox box command from FSP. BUG=b:112081534 BRANCH=None TEST=Build and boot Nami Verify that suspend/resume and consecutive reboots are working Change-Id: I6ec18a4c3fae6a66cf8a95685d91a8ba51e2697c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/27780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-02google/banon: Add support for additional RAM types/configsMatt DeVillier
Adapted from chromium commits 831a372 and cc96c27 [Banon: board 2nd source DDR memory] Add support for hynix/H9CCNNN8GTALAR-NUD and Nanya/NT6CL256T32CM-H1 Original-Change-Id: Ifd161ba5ade44e71c88655f760ca66668b5c5178 Original-Change-Id: I5cba13701ed8e037e21d34ed55162ee56291a842 Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com> Original-Tested-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Original-Reviewed-by: Vincent Wang <vwang@chromium.org> Original-Reviewed-by: YH Lin <yueherngl@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I2166d1025ede33148c7ab623ba59190a342c4736 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-02google/edgar: Add support for additional RAM types/configsMatt DeVillier
Adapted from chromium commits 2319742 and 3b59fb2 [Edgar: Add Micron MT52L256M32D1PF-107 SPD data] [Edgar: Add Hynix H9CCNNN8GTALAR-NUD and Nanya NT6CL256T32CM-H1 SPD data] Supported 2nd source Hynix, Micron, and Nanya memory. TEST=Built and used mosys command by "mosys -k memory spd print all" Original-Change-Id: Iec9160b74d2812620d2d28f841d503e2d63c8579 Original-Change-Id: I610f01a0198f835a2038511ff78bf0cfba7812a0 Original-Signed-off-by: Hank2_Lin <Hank2_Lin@pegatroncorp.com> Original-Reviewed-by: Vincent Wang <vwang@chromium.org> Original-Reviewed-by: YH Lin <yueherngl@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: If2379d6e58425616f49d77b0cdea1cd90f9a8bfa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-02google/cyan: Configure WLAN_CLKREQ as GPIO and always assert lowMatt DeVillier
Adapted from chromium commit adcb858 [cyan: Configure WLAN_CLKREQ as GPIO and always assert low] This is a workaround for issue b/35648315 as proposed by Intel to ensure that WLAN_CLKREQ always stays low. BUG=b:35648315 Original-Change-Id: I178b3e4fbf74cf08eadfa8bd31b80b018f330e77 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/1055652 Original-Reviewed-by: Rajat Jain <rajatja@chromium.org> Original-Tested-by: Rajat Jain <rajatja@chromium.org> Change-Id: Ie3458b3fbd1ecadf6b99b9804fb98440cf8d6938 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-02google/cyan: Mask Audio IRQ on bootMatt DeVillier
Adapted from chromium commit cf18ab6 [Strago: mask Audio IRQ on boot] Do not start with audio interrupt unmasked; this causes interrupt storms on newer kernels that no longer mask all interrupts when initializing Cherryview pincontrol driver. TEST=Boot various cyan boards with kernels 3.18 and 4.14; verify everything works. Original-Change-Id: Id621682d3b59fea3ac54fb0ab92c8df9c78a6d43 Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/894688 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Icb55c885ea661c41168d3bd24109d2cdbb225546 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-02google/cyan: Mark GpioInt() resources as PullDefaultMatt DeVillier
Adapted from chromium commit 3750e09 [Strago: mark GpioInt() resources as PullDefault] coreboot considers GPIO resources first-class citizens and initializes all pads according to their intended use, with necessary pull settings applied. Therefore let's use PullDefault as pull qualifier in AML, letting the kernel know that it should not attempt to alter pull settings when using GPIOs. TEST=Built and booted on celes, cyan, and egdar; built for other cyan devices. Original-Change-Id: Iff58a324e73a7eeac9b38df05a095fcfe7acd31b Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/898259 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I0c69e77c58b8ceca71bc0c99e16d10c3e539f783 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27760 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-02google/cyan: Switch Touchpad and Touchscreen interrupts to be level-triggeredMatt DeVillier
Adapted from chromium commit 126d352 [Strago: switch Touchpad and Touchscreen interrupts to be level-triggered] The Elan and other touch controllers found in this device work much more reliably if used with level-triggered interrupts rather than edge-triggered. TEST=Boot several cyan boards, verify that touchpad and touchscreen work. Original-Change-Id: I59d05d9dfa9c41e5472d756ef51f0817a503c889 Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/894689 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia4f8cf83351dae0d78995ce0b0ed902d1e4ac3e8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-02google/cyan: do not hardcode virtual interrupt numbersMatt DeVillier
Adapted from chromium commit ee7a150 [Strago: do not hardcode virtual interrupt numbers] Instead of hardcoding virtual interrupt numbers that may change as the kernel changes, use GpioInt() resources to describe keyboard, touchpad, and touchscreen interrupt lines. TEST=Build and boot several cyan variant boards, verify keyboard, touchpad and touchscreen work with newer kernels (4.14+). Original-Change-Id: I98d5726f5b8094d639fb40dfca128364f63bb30b Original-Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/894687 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Iecfb45be433249d274532eb746588483fedb3f52 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-02mb/google/octopus: Enable EC SW sync for allJustin TerAvest
Since this works on Yorp and Bip, we should enable EC SW sync for all known boards so that it doesn't get forgotten. BUG=None TEST=None Change-Id: Ifee8e0b6620dc7554160a10a8e4663db25b6413d Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27755 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-01sdm845: Add GPIO APIDavid Dai
Introduces new and required GPIO APIs, using common pinmux definitions for GPIO configuration. TEST=build & run Change-Id: I8cef9dae2072da32cb0678efefeb8f0070cdde9c Signed-off-by: David Dai <daidavid1@codeaurora.org> Reviewed-on: https://review.coreboot.org/26233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-01mb/google,samsung/*: Add LPC TPM chip driver to devicetreeMatt DeVillier
With commits 9987534 [southbridge/intel: Remove leftover TPM ACPI code] and 66ce18c [soc/intel: Remove legacy static TPM asl code] removing TPM ASL code from the southbridge's LPCB device, the LPC TPM chip driver (drivers/pc80/tpm) must be added to devicetree in order to ensure the new acpigen code is used to replace it. Test: boot various google/samsung boards, verify SSDT created with LPBC.TPM device and TPM visible to and usable by SeaBIOS and Linux Change-Id: Iedaa01f26fb357914549bb3dda24b0bd6ef67480 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27786 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-01sandybridge/raminit_common: use MCHBAR AND/OR macros in remaining placesFelix Held
Change-Id: I1c81eb7c8ed0b819bb76196208cc1269180aca55 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-01make: add clang-format prepare-commit-msg hookRonald G. Minnich
To install this hook, run make install-git-commit-clangfmt This will install a pre-commit-msg hook that runs clang-format on all .c and .h files that are staged. It will add a clang-formatted-by: <git username> line to the commit message to indicate that clang-format was run on the files and that further processing of them is not needed. Change-Id: I1773f55b5b4677dad8f4bea017b6328fd93df20c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/27779 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-01sb/intel/i82801gx: Select INTEL_TOP_SWAP_BOOTBLOCK_SIZEArthur Heymans
This effectively means it is possible to run another bootblock located at top_of_flash - 64K. The i82801gx southbridge has the ability to swap the two top 64K ranges by flipping the BUC.TS bit (RCBA[3414] bit0). This allows coreboot to build roms with a bootblock at the top swap offset by selecting CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK. Change-Id: Id96e10aea3e5fd955d45287134eb8643be414de9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 11:53:01 +0000