summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-23libpayload/x86/exception: Add methods to enable/disable interruptsRaul E Rangel
Will be used by the APIC. BUG=b:109749762 TEST=Verified by the other cls in the stack. Change-Id: Id86f2719d98a90318ac625e09601e5dbb06e3765 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-23libpayload/x86/cpuid: Add a cpuid macroRaul E Rangel
Since libpayload doesn't link against libgcc we need to define our own cpuid macro. I didn't add any error checking since anything in the last decade should support cpuid. BUG=b:109749762 TEST=called it and made sure the correct flags were returned. Change-Id: Id09878ac80c74416d0abca83e217516a9c1afeff Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-23util/docker/doc.coreboot.org/Dockerfile: Use alpine:3.8, Sphinx 1.7Tom Hiller
With Alpine base, use pip to install Sphinx 1.7 and Sphinx-autobuild Alpine, a 4.5MB base, is used over Debian Stable, 101MB, to cut down the total size of the docker image. Change-Id: I53f246206458b1de34cd7f3a42481b91ca285ff0 Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/28211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-23Documentation: Add make rule for sphinx-autobuildTom Hiller
Add livesphinx to start sphinx-autobuild Change-Id: I9eb3217e758c2c882c759fa7ae75a39aaf1a0358 Signed-off-by: Tom Hiller <thrilleratplay@gmail.com> Reviewed-on: https://review.coreboot.org/28210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-23mb/google/poppy/variants/nocturne: enable "Base Attached Switch" deviceDmitry Torokhov
This enables CBAS device on Nocturne to allow hid-google-whisker driver in kernel properly detect device configuration. Change-Id: I5905a2de208e94062f2768a9b7d22147f85c7f38 Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-on: https://review.coreboot.org/28262 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23google/chromeec: Add support for "base attached switch" deviceDmitry Torokhov
On some detachables, the mere presence of attached base is not enough to determine whether the device is in tablet mode or not, so we introducing a new "switch" in EC, separate from "Tablet Mode" switch, to signal whether the base is attached or not. We also want the driver to be separate from cros_ec_keyb, so we create a new ACPI device, C(hrome)B(ase)A(ttached)S(witch), with HID GOOG000B, and guard it with EC_ENABLE_CBAS_DEVICE. Change-Id: Id73a12f04a1a48f7fbd9365c2a501afadf3878fa Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-on: https://review.coreboot.org/28260 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23siemens/mc_apl1: Make adjustments for the 1st redesign of this mainboardMario Scheithauer
For the 1st redesign of mc_apl1 mainboard some adjustments are necessary: - The FPGA is now connected directly via a PCIe Root Port - Internal Apollo Lake UARTs are now used - Adjusting GPIO settings Change-Id: I8917a52325306f24d1c39a88dac47b0cee760d57 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-08-23siemens/mc_apl1: Move board specific things to mc_apl1 variantMario Scheithauer
A FPGA is not necessarily available in further mc_apl1 variants. So we move the loading of the driver and the notify function to the mc_apl1 variant. Setting the CPU to Max Non-Turbo Ratio is also not absolutely necessary for further variants. Change-Id: I9f8438407f231df08e1ad04655bb6f747257e268 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/28269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-08-23mb/foxconn/d41s: Add mainboardArthur Heymans
This supports the Foxconn d41s, d42s, d51s, d52s. The following is tested (SeaBIOS 1.12 + Linux 4.9) and works: - COM1 - S3 resume (with SeaBIOS needs sercon disabled) - Native graphic init on VGA output - SATA - USB - Ethernet - PS2 keyboard The base for this mainboard port was the Intel D510MO port. Change-Id: Ie4ec9cbf70adcdddbc2e5d805e4806825c320072 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28227 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23mb/google/octopus: Add null pointer checkJohn Zhao
src/mainboard/google/octopus/mainboard.c Function dev_find_slot may return NULL, check before its usage. Found-by: klockwork BRANCH=None TEST=Built & booted Yorp board. Change-Id: I160adbe3b0a5a2b0f11fd1567513860664d4bee3 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28235 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23drivers/spi/spi_flash: don't allocate unbounded stack memoryPatrick Georgi
This open-codes flash_cmd, but until the API is fixed for real, it uses xfer's existing scatter-gather ability to write command and data in one go. BUG=chromium:446201 TEST=emerge-coral coreboot succeeds Change-Id: Ic81b7c9f7e0f2647e59b81d61abd68d36051e578 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-23mb/google/octopus/var/meep: Update GPIO config for meepWisley Chen
The change updates GPIO configuration for meep. 1. Update touchscreen power enable GPIO in devicetree. 2. Provide default override tables for GPIO configuration. BUG=b:112955087 TEST=Boot on meep proto board with Intel (Jefferson Peak) wifi card. Change-Id: Idb4e7a510eef15c2e118058d5848080782f4f665 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/28252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-22nb/intel/*/gma.c: Skip NGI when VGA decode is not enabledArthur Heymans
Writes to VGA MEM and IO by NGI are invalid if the IGD is not decoding them. Change-Id: I4b9329d14105eb563a0d4aea6ef75ff11febf6df Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-22soc/intel/apollolake: Fix logical vs. bitwise operatorJohn Zhao
src/soc/intel/apollolake/chip.c Apply bitwise operator instead of logical one. Found-by: Coverity Scan BRANCH=None TEST=Built & booted Yorp board. Change-Id: I36746b04dec889f53c8d7eeb3b1d8118eff1de42 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-22src/mainboard/*: Remove IFD_*_REGION values for ifdfakeAngel Pons
Since ifdfake has been deprecated in favor of better alternatives, such as flashrom IFD parsing. Therefore, there is no need to support ifdfake any further. Remove the IFD_*_REGION values on the few motherboards with them. Change-Id: Ie07116a7fb960c6ca832d802016f22c6677baac9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28232 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-22soc/amd/stoneyridge/smihandler.c: Report pending wake eventRichard Spiegel
There's a small window of opportunity when CPU is already in SMM but has not yet entered S3 for a wake event to happen, which would cause a failed S3 entry. Check for pending events at the very last moment possible, and if there are pending wake events report them. BUG=b:111100312 TEST=build and boot grunt. Change-Id: I9472fdf481897fcf9f4c669f6b1514ef479fce7a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-22drivers/elog/elog.c: Create extended eventRichard Spiegel
For debug reasons, sometimes you not only want to log an event, but also some extra information that would help debugging. Create an extended event reporting event type with a dword complement, and define extended events for failing to enter S3 due to pending wake event (one for pm1 and one for gpe0). BUG=b:111100312 TEST=Add a fake pending wake event, build and boot grunt, see the event in eventlog.txt. Change-Id: I3e8df0953db09197d6d8145b0fc1e583379deaa5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-22payloads/external/Memtest86Plus: allow for selecting a specific revisionStefan Tauner
Because the Kconfig configuration files for primary payloads are already sourced via a wildcard pattern this change requires to use another file name pattern. Change-Id: I83b89f5e14618e8a487ebb044fcdd3c175662591 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-22cbtable: remove chromeos_acpi from cbtableJoel Kitching
Since we can derive chromeos_acpi's location from that of ACPI GNVS, remove chromeos_acpi entry from cbtable and instead use acpi_gnvs + GVNS_CHROMEOS_ACPI_OFFSET. BUG=b:112288216 TEST=None CQ-DEPEND=CL:1179725 Change-Id: I74d8a9965a0ed7874ff03884e7a921fd725eace9 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/28190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-22acpi: remove CBMEM_ID_ACPI_GNVS_PTR entryJoel Kitching
Since we can retrieve the address of ACPI GNVS directly from CBMEM_ID_ACPI_GNVS, there is no need to store and update a pointer separately. TEST=Compile and run on Eve Signed-off-by: Joel Kitching <kitching@google.com> Change-Id: I59f3d0547a4a724e66617c791ad82c9f504cadea Reviewed-on: https://review.coreboot.org/28189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-22util/crossgcc: update IASL to v20180810Martin Roth
Change-Id: Idce2587a87c5e0677a4571b59ef40e5486c22da9 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/27527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-22lib/fit_payload: Add coreboot tables support for FDT.Philipp Deppenwiese
Copy code of depthcharge boot/coreboot.c and adapt it. Tested on Cavium CN8100 EVB SFF, /sys/firmware/log is readable and prints the log. Change-Id: Ib714a021a24f51407558f484cd97aa58ecd43977 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/28104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-22Documentation/northbridge/intel/sandybridge/*: fix typosAngel Pons
Fix some words' spelling and rename "Sandybridge" and "Ivybridge" in text (not filepaths) to match Intel's names "Sandy Bridge" and "Ivy Bridge". Change-Id: Ic77126ccaf1d3ec5530a35d1a0f7d2ea5e174c9a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/28231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-22mb/google/octopus/variants/bobba: Apply new GPIO configs for bid >= 2Furquan Shaikh
This change updates the board id check for version >=2 to apply new GPIO configs. BUG=b:112618194 Change-Id: I3544c9596c465615818d2040682e554a64fc6b1a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28263 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-21nb/intel/sandybridge/raminit: Move fill_smbios17 to ddr3.cPatrick Rudolph
There's nothing Sandy Bridge specific in this code. Make it available on all platforms to reduce code duplication. Tested on Lenovo T430: SMBIOS entry 17 is still valid. Change-Id: I051c3e07a999d8dad082c24f65b43dce180349fd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/28213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-21security/tpm: Fix TPM 1.2 state machine issuesPhilipp Deppenwiese
* Fix ACPI resume path compilation for TPM ramstage driver * Move enabling of the TPM prior activation and remove reboot return status from TPM enable. More information can be found via the TCG specification v1.2 Tested=Elgon Change-Id: Ided110e0c1889b302e29acac6d8d2341f97eb10b Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/28085 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-21superio/ite/it8721f: Add SuperIO ACPI declarationsArthur Heymans
Change-Id: I074d57fa5b140b6946ae81beb210fefac48a66eb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-21superio/ite/it8721f: Add resourcesArthur Heymans
There is no public datasheet available for this SuperIO so the resources are guessed by looking at other ITE SuperIO's and the register dumps while running vendor firmware. The only board with this SuperIO in the tree is the asus m5a88-v. Most of the devicetree entries would have been invalid here so one should not worry too much about regressions. Tested with Foxconn d41s. Change-Id: I6715c68b3aa9aebf6e292975cbf64ce905b30e8b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-21nb/intel/pineview: Use a common MMCONF_BASE_ADDRESSArthur Heymans
This should not be board specific. Change-Id: Ifa617e84af767f33a94f1ddfa7d4883c1a45198f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-21nb/intel/pineview: Use the correct address for the RCVEN strobeArthur Heymans
When doing the receive enable training, the final mapping of the ranks is already done, so we can be sure that that address 0x00000000 there will always be a rank. Change-Id: I7ac017a8816fc9a47cef0695826a1c32f699f6f8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-21nb/intel/pineview: Use i2c block read to fetch SPDArthur Heymans
With this the time spend during the raminit decreases from ~480ms to ~126ms. Change-Id: Ic23f39f1017010c89795e626f6a6f918f8bda17a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-21soc/intel/skylake: Remove unsupported sleepstates in ACPI tableLucas Chen
Some OS certification test (for example Windows) will fail if there are unsupported sleep states. Since these states are not really used today, we can remove them from ACPI table. BRANCH=eve BUG=b:72197653 TEST=certification system sleep test pass. Change-Id: I5f5122cac1bf61f7c580afb18cc66b5ff07286fb Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/1065401 Commit-Queue: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://review.coreboot.org/28080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-08-20vendorcode/amd/pi/00670F00/Lib: Remove unused functionsRichard Spiegel
The only code still used are LibAmdPciRead() and LibAmdPciWrite(). These functions are used by PspBaseLib. Remove all functions that are not used, directly or indirectly, by LibAmdPciRead() and LibAmdPciWrite(). BUG=b:112688270 TEST=Build grunt Change-Id: Iba5cfbeee8e83ca78279a1bc2a333370c04f55ed Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/28194 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20vendorcode/amd/agesa/f15tn: add Richland RL-A1 to the equivalence tableMike Banon
This small change is required for the successful loading of microcode from F15TnMicrocodePatch0600110F_Enc.c for the Richland RL-A1 CPUs, such as A10-5750M found at coreboot-supported Lenovo G505S laptop. Richland RL-A1 and Trinity TN-A1 CPUs are using the same microcode, so the Richland RL-A1 IDs should be added to this equivalence table. Function `GetPatchEquivalentId()` in `src/vendorcode/amd/agesa/f15tn/Proc/CPU/cpuMicrocodePatch.c` goes through the equivalence table like below. for (i = 0; i < (EquivalencyEntries * 2); i += 2) { // check for equivalence if (ProcessorRevisionId == MicrocodeEquivalenceTable[i]) { *ProcessorEquivalentId = MicrocodeEquivalenceTable[i + 1]; return (TRUE); } } Change-Id: I7a68f2fef74fb4c578c47645f727a9ed45526f69 Signed-off-by: Mike Banon <mikebdp2@gmail.com> Reviewed-on: https://review.coreboot.org/28204 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: <awokd@danwin1210.me> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20eve: Add PL1 override to 7WLucas Chen
Change PL1 from 4.5W to 7W, based on thermal test results. BRANCH=eve BUG=b:73133864 TEST=Verify the MSR PL1 limitation is set to 7W. Change-Id: Ic3629f9c3b7eb6eef1a1b5a3051c9a11448bc9ad Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28078 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20soc/intel/skylake: Support PL1 override optionWei Shun Chang
In legacy mode, DPTF on some systems may rely on MMIO to control PL1 settings. However, MSR PL1 also contributes to the decision of max PL1 power; and in the current design, the lower value takes effect. In order to align MMIO and MSR settings, a tdp_pl1_override option is added to override the MSR PL1 limitation. BRANCH=eve BUG=b:73133864 TEST=1. Write PL1 override setting in devicetree.cb 2. Verify the MSR PL1 limitation is set correctly. Change-Id: I35b8747ad3ee4c68c30d49a9436aa319360bab9b Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20Makefile.inc: Ensure update of build.hNico Huber
There were so many pitfalls that I wrote my own version of this even- tually. This version is inspired by the procedure of Alex Thiessen[1]. Instead of generating a `build.h` on demand, we always generate a tem- porary version that, if it differs from the current one, is added as a dependency. As we use .SECONDEXPANSION on the prerequisites, special care is taken that we won't generate the file twice. As it would be too late to add the dependency if we'd run `genbuild_h.sh` inside a recipe, we have to run it through the `$(shell)` function. But that brings us to the next issue: The make variables used by `genbuild_h.sh` are not expor- ted to this shell like they would be in a recipe. So we export them manually. We could also make these variables explicit parameters of `genbuild_h.sh` instead. An alternative to always creating the temporary `build.h` would be to add a phony target as dependency instead, and finally calling `genbuild_h.sh` again in case we need an update. But, um, we create so many files anyway... [1] https://review.coreboot.org/25685 Change-Id: I311cf610eabae873c70f2985fc7a09acec8061f0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-20atlas: enable keyboard backlight supportCaveh Jalali
This adds support for controlling the keyboard backlight over ACPI. BUG=b:112619894 BRANCH=none TEST=verified keyboard backlight can be adjusted using keyboard shortcuts Change-Id: I25713f341e8b5a4e50903ac109bfa717f20969d8 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/28205 Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20mb/google/poppy/variants/nocturne: enable eistMatt Delco
Enable Enhanced Intel SpeedStep (EIST) on nocturne. Change-Id: Ie9b832f5bc3a5ef300783bd9bcd7cf5d186b98fa Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20mb/google/eve: enable eistMatt Delco
Enable Enhanced Intel SpeedStep (EIST) on eve. Change-Id: I49b18b817cda570f5c3c4d048c4e03329ac10b87 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20soc/intel/skylake: add CPPC supportMatt Delco
ACPI 5.0 defines a method _CPC for "Continuous Performance Control" (CPPC). Linux has a driver that enables features like speed shift without consulting ACPI. Other OSes instead rely on this information and need a _CPC present. Prior to this change performance in Win10 never exceeds 80% and MSR 0x770 is 0, while with this change (and enabling eist) higher speeds can be achieved and the MSR value is now 1. Change-Id: Ib7e0ae13f4b664b51e42f963e53c71f8832be062 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/27673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-08-20cpu/intel/common: add function to init cppc_configMatt Delco
This change adds a method to init a cppc_config structure in a way that should ideally work across Intel processors that support EIST. Change-Id: Ib767df63d796bd1f21e36bcf575cf912e09090a1 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/28068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-08-20soc/intel/common/block: Move common uart function to block/uartSubrata Banik
This patch moves uart functions which are common across multiple soc to block/uart. This will remove redundant code copy from soc {skylake/apollolake/cannonlake}. BUG=b:78109109 BRANCH=none TEST=Build and boot on KBL/APL/CNL platform. Change-Id: I109d0e5c942e499cb763bde47cb7d53dfbf5cef6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20nocturne: Enable debouncing of SX9310 CLOSE / FAR IRQsEnrico Granata
This is meant to solve an issue where the proximity sensor may fluctuate between CLOSE / FAR in rapid succession upon the user removing their hand from the unit, before settling on the correct output. Using the hardware debouncing filter solves this issue and removes the spurious fluctuations. BRANCH=None BUG=None TEST=manual on Nocturne, observing events come in Change-Id: I78cc4852d42fcda6209fedce1ce91236b5814571 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/28112 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20soc/intel/common/block: Add WHL 2-core SKUKrzysztof Sywula
There are two SKUs of Whiskey Lake W0, 2-core and 4-core. Change-Id: Ia9b2707568702a5fbae3e9495ca53df34613a542 Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/28111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20soc/intel/apollolake: Force USB-C into host modeJohn Zhao
When USB OTG is set, GLK FSP enables xHCI SW ID pin and configures USB-C as device mode. Force USB-C into host mode. BUG=b:111623911 TEST=Verified that USB-C being host mode once USB OTG is set. Change-Id: Iaca3d25a1159f922b743963cbc508d8defa7b6ff Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20mb/google/octopus/variants/fleex: Increase weida touchscreen reset delayCrystal Lin
Weida touchscreen controller needs 130 ms delay after reset BUG=b:111102092 BRANCH=master TEST=Verify touchscreen on fleex works with this change Change-Id: Ia86c3acf3c0e09ca05cc1681113672b546f830a0 Signed-off-by: Crystal Lin <crystal_lin@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/28115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-20util/lint: Exclude util/superiotool from checkpatchNico Huber
`superiotool` follows its own style (e.g. lot's of missing spaces and odd placement of braces in the register descriptions). Change-Id: Ifa33938a0fbac10577cbda10537f856f6f100233 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28214 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20configs: Build test verbose BDK and FIT payload supportPatrick Rudolph
Change-Id: I2075142a0b241222839899e707a1e3d264746432 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/28228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-08-20drivers/pc80/rtc: do not warn if CMOS options are unavailableStefan Tauner
Callers should have a default ready and get noticed by the return value of get_option(). No need to scare log readers at this location. Change-Id: Ied373d8a02afdc8d1017c9f41d9004e3797dfbb3 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28215 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-30 08:10:54 +0000