summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-01mb/google/zork: Drop GPIO_27 configuration for trembyle referenceFurquan Shaikh
This change drops GPIO_27 configuration for trembyle reference boards since it is unused. BUG=b:159453643 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I57dd78e8abcc61802ca85158e7ff348460ad1d8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/42939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Add support for active low wifi power enableFurquan Shaikh
A late change went into v3+ of reference schematics which inverted EN_PWR_WIFI to meet PCIe reset/power timings for WiFi device. This is incorporated into v3.51+ for Trembyle reference and v3.2+ for Dalboz reference. However, some variants are built with v3+ reference schematics, but without the inversion of EN_PWR_WIFI polarity. Thus, we need to add support for following combinations: 1. Pre-v3 Schematics 2. V3+ Schematics 3. V3+ Schematics + Active low wifi power This change adds a new Kconfig `VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW` that sets the minimum board ID that has EN_PWR_WIFI active low in hardware. Variants that missed this change in V3+ integration (berknip and vilboz) have board IDs set to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS + 1. For others, this defaults to VARIANT_MIN_BOARD_ID_V3_SCHEMATICS. BUG=b:159749536 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib8da7fba5f4a518a51b203d6a01a9551e261d8b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Move GPIO sleep table to dalboz and trembyle referenceFurquan Shaikh
This change moves variant_sleep_gpio_table() definition to dalboz and trembyle references to allow each to make their own changes. BUG=b:159749536, b:159453643 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I15b19cea05f1a540c56b6bc0507306d2348ac17f Reviewed-on: https://review.coreboot.org/c/coreboot/+/42937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Move PCIE_RST1_L deassertion to happen early for dalbozFurquan Shaikh
This change moves PCIE_RST1_L deassertion to happen as part of variant_pcie_power_reset_configure() instead of variant_romstage_entry() since romstage is guaranteed to run 100ms+ after PP3300_NVME is enabled. This is one of the first things that coreboot on x86 does as part of early mainboard configuration. Additionally, this change also drops deassertion of PCIE_RST0_L on bid 1 for dalboz since PCIE_RST0_L is already deasserted much earlier in the boot flow. BUG=b:152582706 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib734aa6ff664268e68388b1997ddce676504f8d2 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261996 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Aaron Durbin <adurbin@google.com> Tested-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Configure GPIO_40 as drive low in sleep pathFurquan Shaikh
This change configures GPIO_40 (NVME_AUX_RESET_L) as drive low in sleep path so that the PERST# to NVMe device keeps asserted until coreboot reconfigures it as high on S3 resume path. This is similar to the earlier change for PCIE_RST1_L but helps platforms that use NVME_AUX_RESET_L instead of PCIE_RST1_L. GPIO_40 lives in S5 domain, hence it retains state across S3 entry/exit. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie79e946eee8f393863630226ae2183e653030415 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261117 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Reconfigure PCIE_RST1_L as GPO driven low on sleep pathFurquan Shaikh
This change configures PCIE_RST1_L as GPO driven low on the sleep path. This is required to keep PERST# asserted to devices until coreboot deasserts it on S3 resume path. Without this change, on S3 resume, PCIE_RST1_L gets deasserted sooner than required resulting in violation of PCIe reset timings. With this change, the behavior of PCIE_RST1_L is as follows: 1. GPIO27 is configured as NF (PCIE_RST1_L) in coreboot bootblock/romstage and driven high. 2. On S3 entry, GPIO27 is configured as GPO driven low. * Boot out of G3: Timing should be met since GPIO_27 is pulled down by default until coreboot configures it. * S3 resume: Timing should be met since GPIO_27 is configured as GPO low and it retains state across S3 entry/exit. So, should be low until coreboot configures it. * Warm reset: Timing should be met since it is configured as NF. So, hardware guarantees the reset timing as seen in "warm reset.jpg" in #46. BUG=b:152582706 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia0ad1522edc438fd054d927ef4a2ab5c27329c00 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261116 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Turn off power to camera and pen in sleep pathFurquan Shaikh
This change turns off power to camera and pen devices when entering sleep since they do not act as wake sources in S3. Power to trackpad and WiFi is left enabled since they are wake sources for S3. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I21bcdd53370372c7d43c3b685abb2a9171e42d22 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2261115 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01mb/google/zork: Add support for GPIO configuration on sleep pathFurquan Shaikh
This change adds support to configure GPIOs on the sleep path. This is required to turn off power to devices that do not act as wake sources and to assert reset to devices. Currently, variant_sleep_gpio_table() returns an empty table by default. In the following changes, entries will be added to gpio_sleep_table. BUG=b:152582706 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7286cbf165024bdd81f8748e525542dce8dd8702 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2253642 Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-07-01nb/intel/ironlake: Remove unused structsAngel Pons
These were copied from gm45, but are not used. Drop them. Change-Id: I85ca37516272a2c1af88a65df2682e92d7579050 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-01nb/intel/pineview: Drop undefined function declarationAngel Pons
This function isn't defined anywhere for Pineview. Drop its declaration. Change-Id: I38a01d6ba5aaa91de08702c1eb8a2e8c70688192 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-01soc/intel/tigerlake: Switch to CSE Lite RW at BS_DEV_INIT_CHIPS entryJamie Ryu
This is a W/A to avoid a communication issue with CSE Lite over Heci interface. This will help to avoid boot failures with CSE Lite until the permanent fix is available. BUG=b:159884143 TEST=build and boot volteer with serial and non-serial image Change-Id: Ib136a2154b36c63c7147bbcfbf1ca7beac3a5685 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42790 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01mb/google/nightfury: Override VBT selection for nightfury 2nd skuSeunghwan Kim
Override VBT for nightfury SKU_ID = 2 to support different panel. BUG=b:159051021 BRANCH=firmware-hatch-12672.B TEST=Built and verified using different VBT by SKU_ID Change-Id: I9450814aadc43cc7991457c3793f109b889186b9 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-01crossgcc: Upgrade IASL to version 20200528Elyes HAOUAS
Update fixes build issues with host GCC 10. Other changes: https://acpica.org/node/177 https://acpica.org/node/178 https://acpica.org/node/179 https://acpica.org/node/181 acpinames utility removed: "Removed support for the acpinames utility. The acpinames was a simple utility used to populate and display the ACPI namespace without executing any AML code. However, ACPICA now supports executable opcodes outside of control methods. This means that executable AML opcodes such as If and Store opcodes need to be executed during table load. Therefore, acpinames would need to be updated to match the same behavior as the acpiexec utility and since acpiexec can already dump the entire namespace (via the 'namespace' command), we no longer have the need to maintain acpinames." Change-Id: Ibd995561ca53458b04f87cee5693850c0d90d3d6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38907 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01mb/google/zork: update G2 TS RST delay timeKevin Chiu
in some m/b+BOE panel(G2 TS), G2 TS may still have chance to lost even rst delay time already meets spec definition: 10us (minimum). Restore G2 TS RST delay time to 50ms, we could have G2 TS working fine on those specific m/b+BOE(G2 TS) panel. BUG=b:159510906 BRANCH=master TEST=emerge-zork coreboot boot with G2 TS, make sure G2 TS is functional Change-Id: Ic629c6c61572ab564def8893ce8d78dfb37d4590 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-01mb/prodrive/hermes/variants/baseboard: configure sataHotplugJonas Loeffelholz
Configure sataHotPlug in devicetree, as this functionality is now available for this soc. Change-Id: If462e33d1bbef8036d598970fb2774d0fda1fbb1 Signed-off-by: Jonas Loeffelholz <Jonas.Loeffelholz@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42804 Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01soc/intel/cannonlake: make satahotplug user configurable via devicetreeJonas Loeffelholz
Hook up the FSP UPD Change-Id: I6b479bfc83492440eac97cdc8dcc560b6abf4fdf Signed-off-by: Jonas Loeffelholz <Jonas.Loeffelholz@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42803 Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01soc/intel/common/cpu: Don't set any TCC settings if offset is 0Tim Wawrzynczak
Many previous versions of this function would return early if tcc_offset is 0. This adds that logic back in. Change-Id: Ibc529520a4e74608cb5d20e5a6e8fc2c727c903c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-07-013rdparty/amd_blobs: Update Picasso PSP filesMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I752804919227c1522374b93e08abee13396b2679 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-07-01soc/intel/skylake: Update ASL syntax in xhci.aslEdward O'Callaghan
Use some defines as well for clarity. Change-Id: I83204a1a39534066a5f32f6e33a1bed0c827392f Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42898 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01soc/intel/tigerlake: Add platform wide _OSC capabilities for USB4John Zhao
This change adds Platform-Wide _OSC capabilities for native USB4 support. There is Engineering Change Request (ECR) with _OSC addition for OSPM USB support. ACPI section 6.2.11.1.13 is modified with bit 18 as native USB4 support. The OS sets this bit to indicate support for an OSPM-native USB4 Connection Manager which handles USB4 connection events and link management. The OS use the _OSC mechanism and the bit defined in this ECR to obtain configuration and connection management capabilities of USB4 connections. This change also fixs the byte index for the DWord-addressable field CDW3 from the capabilities buffer. BUG=b:140645231 TEST=Check Type C device all ports connection/enumeration with SW CM. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I1b561ea5a0a6b440cca3152cc150f31abf7766ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/42821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-01tests/lib/Makefile.inc: remove a commentAnna Karas
Remove a comment since is not useful anymore. Signed-off-by: Anna Karas <aka@semihalf.com> Change-Id: I236b040a83700bcd34d99db61e5dad0ff7abb28c Reviewed-on: https://review.coreboot.org/c/coreboot/+/42312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-01Kconfig: Fix warningBenjamin Doron
Add closing quotation mark to fix Kconfig warning. Change-Id: I75e8d23b81266553d7c40de7f52c6c03107c43de Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-01ACPI GNVS: Replace uses of smm_get_gnvs()Kyösti Mälkki
Change-Id: I7b657750b10f98524f011f5254e533217fe94fd8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-01sb/intel/i82801dx: Drop APM_CNT_MBI_UPDATEKyösti Mälkki
No useful implementation existed. Change-Id: I9a6f9876330fe9f0cdb2925e20f3675fda53d32b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42852 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01sb/intel/i82801dx: Drop GNVS in SMMKyösti Mälkki
The table in CBMEM was never allocated with i82801dx. Change-Id: I4ad97f6504e0f1b22d16210b7dbf5164852cb232 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42851 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01mb/google/octopus/variants/dood: fix disable_xhci_lfps_pm by skuKenneth Chan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ia047c75611a35aafd15f2481bf64049e13d4a2ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/42860 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01acpi: Avoid freeing a device twiceSimon Glass
The current implementation of acpi_dp_write() frees the node after it has written it. If the structure contains a ACPI_DP_TYPE_CHILD then a recursive call to acpi_dp_write() frees the child and then frees it again when returning from the call. This results in a double free. Split the implementation into two steps, one that ones and one that frees. This is easier to understand and fixes the bug. Note: This likely has no effect in coreboot since it doesn't seem to have a proper free() implementation. But it might gain one one day. BUG=none Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: Ife3917af10bc35a3c3eee38d8292f927ef15409d Reviewed-on: https://review.coreboot.org/c/coreboot/+/42892 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Clear interrupt and wake status when configuring padsFurquan Shaikh
This change clears interrupt and wake status for a pad when configuring it. This ensures that stale interrupts/wake notifications are flushed out and do not cause spurious wakes in future suspends. BUG=b:159944426 Change-Id: Ia4ebd975312a4136f1d0690d7af7372615e31f0f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42877 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Add new helper macro PAD_CFG_STRUCT_FLAGSFurquan Shaikh
`flags` field of soc_amd_gpio structure is set only for SCI and SMI configurations. This change adds a new helper macro PAD_CFG_STRUCT_FLAGS that allows setting of all soc_amd_gpio members including `flags` field. This can be used directly by PAD_SCI and PAD_SMI. For all other pad configurations, PAD_CFG_STRUCT macro uses PAD_CFG_STRUCT_FLAGS with flags set to 0. This allows dropping of redundant parameter 0 for flags for all other pad configurations. BUG=b:159944426 Change-Id: I835b62f5502375ffc4215548b51338a67546d699 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42876 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/gpio, mb/{amd,google}: Configure pads using a single entry in GPIO ↵Furquan Shaikh
configuration table Currently, for Stoneyridge and Picasso mainboards, pads that are configured for SCI/SMI/WAKE need to have multiple entries in the configuration table - one for PAD_GPI and other for the special configuration that is required. This requires a very specific ordering of pads within the table and is prone to errors because of conflicting params provided to the different entries for the same pad. This also does not work very well with the concept of override GPIOs where the entry in base table is overridden with the first matched entry from the override table. This change updates the way GPIO configuration is handled for special routing like SCI/SMI/WAKE/DEBOUNCE by setting the control field of soc_amd_gpio structure in the macros performing these configurations. Also, program_gpios() is updated to perform a write to GPIO control register instead of read-modify-write. This is because mainboard is expected to provide only a single configuration entry for each pad within a given table. Thus, there is no need to preserve earlier configuration. Mainboards that were providing multiple entries for a single pad are updated accordingly. BUG=b:159944426 Change-Id: I3364dc2982d66c4e33c2b4e6b0b97641ebea27f0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42875 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Use gpio_setbits32()Furquan Shaikh
Some codepaths want to set selected bits of a hardware register to match those of a given variable in memory. Provide a helper function for this purpose and use it in gpio_set(), gpio_input_pulldown() and gpio_input_pullup(). This change also adds GPIO_PULL_MASK and updates GPIO_OUTPUT_MASK to include all bits dealing with pull and output respectively. Change-Id: I4413d113dff550900348a44f71b949b7547a9cfc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-30mb/google/kahlee: Do not enable SCI for H1_PCH_INT_ODLFurquan Shaikh
H1 is not a wake source and hence there is no need to configure SCI GEVENT for it. This change drops PAD_SCI() configuration for GPIO_9 i.e. H1_PCH_INT_ODL. BUG=b:159944426 Change-Id: Iec2285b76f9c5fa1b4b1be15128fea316fa04555 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-30mb/amd/padmelon: Drop SCI configuration for GPIO_137Furquan Shaikh
GPIO_137 does not have any gevent associated with it. This change drops the configuration of GPIO_137 as SCI for padmelon. Change-Id: I0579d05bda4523bbb5e3441d2a3b6e2b33b05cfc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42873 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Add macros for setting fields of soc_amd_gpioFurquan Shaikh
This change adds helper macro PAD_CFG_STRUCT for setting the fields of `soc_amd_gpio`. Additionally, macros are added for different operations i.e. pull, output, trigger, int_enable, event_trigger, wake_enable, debounce, etc. All GPIO configuration macros are updated to use PAD_CFG_STRUCT instead of setting the fields directly. BUG=b:159944426 Change-Id: I03535d2da0c05f72c4163fa30d72f9c6df44908b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42872 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/lpc: Skip SERIRQ setup when using eSPIMarshall Dawson
BUG=b:157984427 TEST=check value of PMx054 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I2ca14c137ed784a1a7cfeed969719f46fc8230f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-30soc/amd/common/gpio: Rename GPIO debounce macrosFurquan Shaikh
This change updates the macros for GPIO debounce to add _DEB_ in the name. This is done to make the names consistent with rest of the GPIO control field names. BUG=b:159944426 Change-Id: Ic47678108c871c5f1cd0d512783230f18adf3484 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42871 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Update the macros for interrupt and pad filteringFurquan Shaikh
This change renames GPIO macros as follows: 1. Pad filtering macros are renamed to GPIO_TRIGGER_ and GPIO_ACTIVE_. This determines the filtering applied on the input signal at the pad. 2. Interrupt enabling macros are renamed to GPIO_INT_ENABLE_. _INT_ is dropped from pad filtering macros because the filtering applies to the input signal irrespective of how it is routed. It is applied at the pad not only for GPIO interrupts but also for other routes i.e. SCI, SMI, etc. BUG=b:159944426 Change-Id: Id0ad770be77409aaaae4cc135945e2815ce97030 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42870 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30soc/amd/common/gpio: Make macro names for GPIO flags consistentFurquan Shaikh
`soc_amd_gpio` structure uses a flag field to store additional information about GPIO configuration that does not end up directly in the GPIO control register. However, the naming for these flags is not consistent across event triggers and special configurations. This change updates the flag names to be consistent (starting with GPIO_FLAG_*) and adds some helper functions for GPIO events. In the following CLs, more changes will be made to drop some of the special flags which are not really required. BUG=b:159944426 Change-Id: Idca795c3e594eb956d297d5ba5d08f75b5563ee5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42869 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30src/arch/x86: Ensure $(objgenerated) exists before it's usedPatrick Georgi
In some rare cases it seems that make tries to build $(objgenerated)/assembly.inc before the build-dirs target has finished, and so assembly.inc can't be written. Enforce that build-dirs is done before assembly.inc starts. BUG=chromium:1098215 BRANCH=none TEST=none Change-Id: Ib141ea45a43836cfdde0059523c331fe5286b06d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-30mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in dtEdward O'Callaghan
BUG=b:159187889 BRANCH=none TEST=none Change-Id: I13626a236f1b7385208c4181150f094cbda490ed Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2020-06-30soc/intel/cannonlake: Add UWES ASL into xhci.aslEdward O'Callaghan
Align support for enable wake-on-usb attach/detach as was introduced in Skylake in `commit 3bfe3404df32ca226c624be0435c640bf1ebeae7`. This adds the USB Wake Enable Setup (UWES) ASL blocks required to inform the OS about plug wake events bits being set in the PORTSCN register configured by devicetree. BUG=b:159187889 BRANCH=none TEST=none Change-Id: I6c63d226e5acadff04486c8a6764fb715a0ac051 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-30jasperlake: enable tcc_offset functionalitySumeet R Pawnikar
This enables Thermal Control Circuit (TCC) activation feature to set tcc_offset value to new value in devicetree. BUG=None BRANCH=None TEST=Built for dedede platform and verified the MSR value Change-Id: I58e4fa362f20efeef84e06e64d70ee7c4f9554d6 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-30mb/google/volteer: set tcc_offset value to 10Sumeet R Pawnikar
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit (TCC) activation feature. BUG=None BRANCH=None TEST=Built for volteer platform and verified the MSR value Change-Id: I6438547e09a3ff3a1c01addfcc01383e89f5b435 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-30tigerlake: enable tcc_offset functionalitySumeet R Pawnikar
This enables Thermal Control Circuit (TCC) activation feature to set tcc_offset to new value in devicetree. BUG=None BRANCH=None TEST=Built for volteer platform and verified the MSR value. Change-Id: I36b0d6aad4be8a9cbb145dcd66d65235d3f6ac35 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-30soc/amd/common/gpio: Drop unused macro GPIO_TRIGGER_INVALIDFurquan Shaikh
This change drops unused macro GPIO_TRIGGER_VALID from gpio_banks.h. BUG=b:159944426 Change-Id: Ie115f37893d9ba190bab56cf8b037febd8b5f4b5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-30sb/intel: Add include guards on nvs.hKyösti Mälkki
Change-Id: I110974f3161f2991536df50acdfe32f68bd2cc60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42850 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30Doc/mb/google/dragonegg: Drop abandoned project infoAngel Pons
Commit 0013623 (mb/google/dragonegg: remove abandoned project) dropped this mainboard because it is no longer in development nor used. However, the associated documentation remained. Rest in pieces, Dragonegg. ;-; Change-Id: Idd2ee716717132ba3fa237ae97f34686007d3685 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-30ACPI: Drop typedef global_nvs_tKyösti Mälkki
Bring all GNVS related initialisation function to global scope to force identical signatures. Followup work is likely to remove some as duplicates. Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-30Add qc_blobs repositoryJulius Werner
This patch adds a separate blobs repository for Qualcomm blobs, analogous to the existing AMD blobs. Qualcomm's binary licenses allow files to be redistributed and used by anyone, but they explicitly require the user to agree to the license terms when just *downloading* the binary (even if they're not using them to build any firmware). Some community members do not like to have to agree to licenses for files they're not actually using, so we are keeping these files separate from the main blobs repository and adding an extra Kconfig to make sure the user is aware of and must explicitly agree to this before downloading these files. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I247746c1b633343064c9f32ef1556000475d6c4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-30Revert "amd/pi/hudson: Add GPIO get function"Kyösti Mälkki
This reverts commit dae95f0dfe9ad94922c940d3c0522d53284b4deb. There is filename conflict with top-level <gpio.h> and incompatibility with it. Only use was AMD_PI_KERN and we have no such platform in the tree anymore. Change-Id: I120b0bfda1501e9941c71315852d87d251f76a5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42743 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 10:10:24 +0000