summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25google/snow: enable GPIO entries and CHROMEOS in buildingRonald G. Minnich
These were not separable or it would have been two CLs. Enable CHROMEOS configure option on snow. Write gpio support code for the mainboard. Right now the GPIO just returns hard-wired values for "virtual" GPIOs. Add a chromeos.c file for snow, needed to build. This is tested and creates gpio table entries that our hardware can use. Lots still missing but we can now start to fill in the blanks, since we have enabled CHROMEOS for this board. We are getting further into the process of actually booting a real kernel. Change-Id: I5fdc68b0b76f9b2172271e991e11bef16f5adb27 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2467 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25QEMU x86: northbridge.c: Name enabling device function to `northbridge_enable`Paul Menzel
Similar to the discussion on the coreboot list [1] Am Freitag, den 22.02.2013, 02:17 +0100 schrieb Peter Stuge: […] > Function names should try to be descriptive. "enable_dev" is not very > descriptive. I like "mainboard_enable" because it makes output such > as > > printk("%s: foo", __func__); > > useful. rename the function for the northbridge to `northbridge_enable`. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074549.html Change-Id: I262311ec511e394550330214621b8c37780c1d4e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2496 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25Persimmon: Fix warning, enable warnings as errorsMartin Roth
- Fix redefinition warning for SB_GPIO_REG50 introduced in commit fa8702cf - http://review.coreboot.org/#/c/2446/ Persimmon: adapt PCIe reset code copied from Inagua to actually match Persimmon The warning being fixed is: SB800.h:1491, GNU Compiler 4 (gcc), Priority: Normal "SB_GPIO_REG50" redefined [enabled by default] - Enable warnings as errors so no more warnings will be accidentally committed. Change-Id: Ib443b2bd2067f0b7d5f93f79170899a0f8f61060 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2494 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25Technologic TS5300: mainboard.c: Move { to next linePaul Menzel
This is coreboot’s coding style. Change-Id: I7441f2c1927a49a3b7171112b7798dae6b56cfb5 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2492 Reviewed-by: Martin Roth <martin.roth@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Bernhard Urban <lewurm@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25ARMv7: Simplify div64Stefan Reinauer
We don't need the overly complex optimized version, since we're only doing this in very few non-critical places. Also, add the div* files to the bootblock, they're needed if we do printk. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I83bd766d4b03b488326ade1c13b7c364a7119e7b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2508 Tested-by: build bot (Jenkins)
2013-02-24Siemens SITEMP G1P1: mainboard.c: Rename `init` to `mainboard_init`Paul Menzel
This is the common way to name that function, so unify that. Change-Id: I8a01051bd304039662894b89eed53ce14dde98b6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2491 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-02-24AMD f14 vendorcode: Fix warningMartin Roth
Add brackets around initializer in #define for PCIE_DDI_DATA_INITIALIZER to fix the warning: PlatformGnbPcie.c:89, GNU Compiler 4 (gcc), Priority: Normal missing braces around initializer [-Wmissing-braces] This warning happens for Inagua and South Station Change-Id: I7d8f742dd8335b704b0493aa6e9eaebc3cc50b1e Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2495 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-23Add support for Google's Chromebook PixelStefan Reinauer
Ladies and gentlemen, I'm very happy to announce coreboot support for the latest and greatest Google Chromebook: The Chromebook Pixel. See the link below for more information on the Chromebook Pixel, and its exciting specs: http://www.google.com/intl/en/chrome/devices/chromebooks.html#pixel The device is running coreboot and open source firmware on the EC (see ChromeEC commit for more information on that exciting topic) Change-Id: I03d00cf391bbb1a32f330793fe9058493e088571 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2482 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-23AMD based boards: platform_cfg.h: Replace `_*BOARDNAME*_CFG_H_` with ↵Jens Rottmann
`_PLATFORM_CFG_H_` Reduce unnecessary differences between AMD based boards only using the file `platform_cfg.h` for configuration making them a little bit easier to compare. Inagua & co. mention the board name in several places which are really not that board specific. Sometimes people even forget to change it: Union Station’s platform_cfg.h starts with "#ifndef _PERSIMMON_CFG_H_". Funny. Change that to "_PLATFORM_CFG_H_" everywhere. The following command was used. $ find . -name platform_cfg.h | xargs sed -i '/_CFG_H_/s/_.*_/_PLATFORM_CFG_H_/' More boards seem to use that kind of naming (`git grep _CFG_H_`) but it is not certain that this will not break anything as for example the board AMD Dinar also has header files for configuration stuff for the north- and southbridge. $ git grep _CFG_H_ […] src/mainboard/amd/dinar/platform_cfg.h:#ifndef _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#define _PLATFORM_CFG_H_ src/mainboard/amd/dinar/platform_cfg.h:#endif //_PLATFORM_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#ifndef _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#define _RD890_CFG_H_ src/mainboard/amd/dinar/rd890_cfg.h:#endif //_RD890_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#ifndef _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#define _SB700_CFG_H_ src/mainboard/amd/dinar/sb700_cfg.h:#endif //_SB700_CFG_H […] Change-Id: Ida15fa6a7adfc770240ac30e795946000dae3f16 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2464 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-02-23AMD/Persimmon: Add RTC init to CIMX SB800Mike Loptien
Adding RTC init code to the Southbridge initialization code in 'late.c'. This initializes the RTC so that the Date Alarm register is set to a valid value (0x00) at startup. By setting the Date Alarm register to 0x00, it does not get evaluated along with the seconds, minutes, and hours when running 'fwts s3'. Information about fwts (Firmware Test Suite) can be found here: https://wiki.ubuntu.com/Kernel/Reference/fwts This was tested on a Persimmon but will apply to other mainboards as well. Change-Id: I9a11bc3f9e3f53c46e7a4d72e62ebb0a4ba1bfe4 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2488 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-22Add support for Google ChromeECStefan Reinauer
Google ChromeEC is an EC with completely open source firmware. See https://gerrit.chromium.org/gerrit/gitweb?p=chromiumos/platform/ec.git;a=summary for the EC firmware source code (aka more information about the ChromeEC) This patch adds support for the ChromeEC on coreboot's side. Great thanks to the ChromeEC team for this amazing work. It's another important milestone towards a free and open firmware stack on modern hardware. Change-Id: Iace78af9d291791d2f5f80ccca1587b418738cec Signed-off-by: Stefan Reinauer <reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/2481 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-22*/acpi_tables.c: Use ALIGN macroPatrick Georgi
At the request of Paul Menzel, I reran an old classic of a coccinelle script: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I01da31b241585e361380f75aacf3deddb13d11c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2487 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-22nvramtool: reduce memory mappingPatrick Georgi
Instead of trying to map the first megabyte, only map what is required to read the tables. Change-Id: I9139dbc8fd1dd768bef7ab85c27cd4c18e2931b3 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/2485 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-22libpayload: cbfs: Fix CBFS max size calculation.Hung-Te Lin
Cherry-picking CBFS fix from http://review.coreboot.org/#/c/2292/ For x86, the old CBFS search behavior was to bypass bootblock and we should keep that. This will speed up searching if a file does not exist in CBFS. For arm, the size in header is correct now so we can remove the hack by CONFIG_ROM_SIZE. Change-Id: I286ecda73bd781550e03b0b817ed3fb567d6b8d7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2458 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-22libcbfs: Fix legacy CBFS API, typosHung-Te Lin
Pulling CBFS fix from libpayload: http://review.coreboot.org/#/c/2455/2 get_cbfs_header expects CBFS_HEADER_INVALID_ADDRESS (0xffffffff) instead of NULL when something is wrong. Also, fix typo. Change-Id: I7f393f7c24f74a3358f7339a3095b0d845bdc02d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2457 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-22Update 3rdparty mark to latest repositoryStefan Reinauer
Change-Id: Ied5515a332e3f2f9abbed1c015cad76f7bb4cd9f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2480 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-02-21AMD Fam14 boards: Unify `acpi_table.c` by mainly using Inagua’s onePaul Menzel
There were just whitespace differences and three boards did not contain printk(BIOS_DEBUG, "alib\n"); dump_mem(ssdt, ((void *)alib) + alib->length); which is enclosed `#if DUMP_ACPI_TABLES == 1` to dump the ACPI tables. Basically the whitespace in the license header in Inagua’s file was fixed and then the file copied over to the other directories. Change-Id: I23f73acad427b5ec14cf51651af67240871f7488 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2470 Tested-by: build bot (Jenkins) Reviewed-by: Alvaro G. <andor@pierdelacabeza.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21AMD boards: Fix typo `@brief` in commentPaul Menzel
The following command was used to correct the typo. $ git grep -l @breif | xargs sed -i 's/@breif/@brief/' Change-Id: If0b579279de3c41571b9cda643836f5748a752a2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2473 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21Persimmon: platform_cfg.h: Declare codec arrays as `static const`Jens Rottmann
From ISO C99 standard: »The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature.« Found at <http://www.approxion.com/?p=41>. Change-Id: Iee7878affb2a5d157a94763083689d75e8218b2f Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2474 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-21Persimmon: dimmSpd.c: Use spaces for alignment of if-predicatePaul Menzel
The relational operators in the if-predicate are aligned in all `dimmSpd.c` files so revert part of the change in commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 to remove the incorrectly introduced tabs and to unify that. It might contradict the current coding style but it is even used in the latest code as seen in the following file. src/northbridge/amd/agesa/family15tn/dimmSpd.c Change-Id: Ib611267f99090d0830bdc2319527389f193ea1eb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2471 Reviewed-by: Alvaro G. <andor@pierdelacabeza.com> Tested-by: build bot (Jenkins)
2013-02-21Persimmon: Indent commentPaul Menzel
This was overlooked in the following commit. commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 Change-Id: If6bf4836b46077614a04c1e106c241a4f97da166 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2468 Tested-by: build bot (Jenkins) Reviewed-by: Alvaro G. <andor@pierdelacabeza.com>
2013-02-21AMD Fam14 boards: dimmSpd.c: Set `iobase` to `SMBUS0_BASE_ADDRESS` instead ↵Jens Rottmann
of `0xB00` For AMD Inagua, the following two commits commit 01f7ab93359ae0fee5784d35effbcbe0b596df18 Author: Kerry Sheh <shekairui@gmail.com> Date: Thu Jan 19 13:18:36 2012 +0800 Inagua: Synchronize AMD/inagua mainboard. Reviewed-on: http://review.coreboot.org/542 and commit d91c9b7e3cb9fdaeb9399a21907996130f3120bb Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 10:59:55 2011 -0600 AMD Inagua platform updates Reviewed-on: http://review.coreboot.org/136 replaced the constant `iobase` is set to by the define `SMBUS0_BASE_ADDRESS` from `OEM.h`. Do the same for AMD Persimmon, South Station, Union station and ASRock E350M1. Change-Id: If095cd9d9b28b118b4072c7c9d345bf620b774c9 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2453 Tested-by: build bot (Jenkins)
2013-02-21AMD S3: Introduce Kconfig variable 'S3_DATA_SIZE'Zheng Bao
Currently the size of the volatile storage for S3 reserved in the image is hardcoded to 32768 bytes. Make that configurable by introducing the Kconfig 'S3_DATA_SIZE'. As the storage space is needed for storing non-volatile, volatile and MTRR data, add a check if the size is big enough. Change-Id: I9152797cf0045c8da48109a9d760e417717686db Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2383 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-21ARMV7: create a correct LB_SERIAL table entryRonald G. Minnich
If CONFIG_CONSOLE_SERIAL is set, and we can call the standard function and get a non-zero uart address, then we create an lb table entry. The code was mostly right, just needed a tweak. Change-Id: I5b36c7b4e580a23319b7ba92cc8ad61592b1757a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2466 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-20Whitespace: Replace tab character in license text with two spacesPaul Menzel
For whatever reason tabs got inserted in the license header text. Remove one occurrence of that with the following command [1]. $ git grep -l 'MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.'$'\t' | xargs sed -i 's,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.[ ]*,MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\ \ ,' [1] http://sed.sourceforge.net/grabbag/tutorials/sedfaq.txt Change-Id: Iaf4ed32c32600c3b23c08f8754815b959b304882 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2460 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2013-02-20Persimmon: Replace tab with space in address in license headerPaul Menzel
The following commit was too eager replacing spaces with tabs. commit 36abff1dc8e74beafa47ad83de17416681970916 Author: Marc Jones <marcj303@gmail.com> Date: Mon Nov 7 23:26:14 2011 -0700 Cleanup Persimmon mainboard whitespace. Reviewed-on: http://review.coreboot.org/427 Fix that with the following command. $ git grep -l 'Floor, Boston, MA'$'\t''02110-1301 USA' | xargs sed -i 's/Boston, MA[ ]*02110-1301 USA/Boston, MA 02110-1301 USA/' Change-Id: Ia118a8c19d94ce1f1048280a0f1d49d447cfa2a7 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2461 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com>
2013-02-20armv7: Don't let users set ram parameters that are fixed in hardware.Ronald G. Minnich
The SDRAM base is fixed in hardware. It makes no sense to make it configurable. The TEXT start is a magic number that should also be fixed, not settable. Change-Id: Ie44cc5c8da1dc38fc00eb602c4a295b045ca5364 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2465 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-20ARMV7: minor tweaks to inter-stage calling and payload handling.Ronald G. Minnich
Payloads, by design, can return. There's lots of mechanism in the payload code to support it, and the chooser payload relies on it. Hence, we should not mark the function call in exit_stage as noreturn. Not all ARM have unified caches, and it's not always easy to tell what to do. So we are very paranoid. Before we call between stages, we should carefully flush the dcache to memory and invalidate the icache. This may be more than is necessary on all architectures but it doesn't really hurt for the most part. So compile cache management code into all stages, and call the flush dcache/invalidate icache from all stages. Change-Id: Ib9cc625c4dfd2d7d4b3c69a74686cc655a9d6484 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2462 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-20libpayload: Fix license headersStefan Reinauer
Not only were these files checked in with the Chromium OS Authors copyright, but in addition they were wrongly licensed as GPL. Switch to 3-clause BSD (and, since we're changing it, fix copyright, too) Change-Id: I3656c1f4304d53e343d89bb7c909fd4b929249f4 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2456 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-19Tyan S8226: Fix incompatible pointer warningMartin Roth
Fix warning: mptable.c:52, GNU Compiler 4 (gcc), Priority: Normal passing argument 3 of 'mptable_write_buses' from incompatible pointer type [enabled by default] mptable_write_buses is expecting a pointer to an int, so I changed the U8 isa_bus to an int to match. A U8 doesn't make sense if the value could be greater than 255 - certainly unlikely, but possible since the value of isa_bus gets set to the maximum PCI bus number + 1. Change-Id: I7ea416f48285922d6cf341382109993fd3f6405c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2450 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-19Tyan S8226: Fix integer truncated warningMartin Roth
Fix Warning: sb700_cfg.c:129, GNU Compiler 4 (gcc), Priority: Normal large integer implicitly truncated to unsigned type [-Woverflow] The issue here was that an 8 bit value was being placed into a 2-bit bitfield. $ more src/vendorcode/amd/cimx/sb700/SBTYPE.h […] UINT32 AzaliaSdin0 :2; //6 UINT32 AzaliaSdin1 :2; //8 UINT32 AzaliaSdin2 :2; //10 UINT32 AzaliaSdin3 :2; //12 $ more src/mainboard/tyan/s8226/sb700_cfg.h […] * SDIN0 is define at BIT0 & BIT1 * 00 - GPIO PIN * 01 - Reserved * 10 - As a Azalia SDIN pin * SDIN1 is define at BIT2 & BIT3 * SDIN2 is define at BIT4 & BIT5 * SDIN3 is define at BIT6 & BIT7 */ #ifndef AZALIA_SDIN_PIN #define AZALIA_SDIN_PIN 0x2A #endif […] $ more src/mainboard/tyan/s8226/sb700_cfg.c […] sb_config->AzaliaSdin0 = AZALIA_SDIN_PIN; […] The 8 bit value 0x2A (binary 00 10 10 10), was being used incorrectly – I believe the original intent of this value was to enable the SDIN pins 0, 1, & 2. Because it was getting truncated as it was put into AzaliaSdin0, this wasn't happening and only SDIN0 was being enabled. I am leaving only SDIN0 enabled at this point to as not change the actual behavior on the platform. Change-Id: Icaeb956926309dbfb5af25a36ccb842877e17a34 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2452 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-19Tyan S8226: Fix printk warningsMartin Roth
Fix 84 warnings all like this one: agesawrapper.c:289, GNU Compiler 4 (gcc), Priority: Normal format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'UINT32' [-Wformat] Fixed by getting rid of the l length specifier and casting to unsigned int. Change-Id: Ic143c1034f760fa5efb2220aa33861e399ddd708 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2451 Tested-by: build bot (Jenkins) Reviewed-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2013-02-19Inagua+children: fix simple copy & paste error in code to reset PCIe slotsJens Rottmann
Looking at AssertSlotReset, the comments and all other case's it's obvious this is a simple copy & paste error where someone just forgot to change one occurrance of the GPIO nr. Also the AMD Inagua schematics show that GPIO02 is what they really meant. Also forward the fix to boards copied from Inagua (AMD South Station, Union Station, Asrock E350M1). Change-Id: I6b9a3d473245fa27604b2f148a730290277a88ed Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2445 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-19libpayload: libcbfs: Fix legacy CBFS API, typosPatrick Georgi
get_cbfs_header expects CBFS_HEADER_INVALID_ADDRESS (0xffffffff) instead of NULL when something is wrong. Also, fix typo. Change-Id: Ibe56c9eab3b9fdfc6d0b14bc848ca75f3a4fc2f1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2455 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-19exynos5250: add uartmem_getbaseaddr() in uart driverDavid Hendricks
Change-Id: I76545ad3fca3cc0997050253be77ea83b5d74cb2 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2423 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-19move uartmem_getbaseaddr() to generic uart headerDavid Hendricks
This moves uartmem_getbaseaddr() from an 8250-specific header to the generic uart header. This is to accomodate non-8250 memory-mapped UARTs. Change-Id: Id25e7dab12b33bdd928f2aa4611d720aa79f3dee Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2422 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-19armv7/snow: add CPU and RAM resources via allocatorDavid Hendricks
This adds necessary device operations to add CPU and RAM resources. Change-Id: Ief8f66627ef37f4fa786bfc3f7899529d3e5b037 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2419 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-19snow: add cpu_cluster and domain resources via devicetree.cbDavid Hendricks
This patch will cause the resource allocator to actually set aside the memory resources using methods in the previous patch. The coreboot table output will include "RAM" entries (there were none before): coreboot memory table: 0. 0000000040400000-00000000bff001ff: RAM 1. 00000000bff00200-00000000bff00fff: CONFIGURATION TABLES 2. 00000000bff01000-00000000bfffffff: RAM Change-Id: I5cd76e93fc232fdae1754253efb4e9269b3a20c0 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2420 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-19romcc: Don't fail on function prototypesPatrick Georgi
Instead, ignore them. One is as non-standard as the other and ignoring is more convenient since we don't need to guard prototypes with #ifndef __ROMCC_ all the time. Change-Id: I7be93a2ed0966ba1a86f0294132a204e6c8bf24f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2424 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-19build system: Retire REQUIRES_BLOBPatrick Georgi
REQUIRES_BLOB assumes that all blob files come from the 3rdparty directory, builds failed when all files were configured to point to other sources. This change modifies the blob mechanism so that cbfs-files can be tagged as "required" with some specification what is missing. If the configured files can't be found (wrong path, missing file), the build system returns a list of descriptions, then aborts. Change-Id: Icc128e3afcee8acf49bff9409b93af7769db3517 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2418 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-19AMD S3: Change S3_VOLATILE_POS to S3_DATA_POSZheng Bao
S3_DATA_POS defines address where the whole S3 data is stored. Change-Id: I4155a0821e74a3653caaead890e5fec5677637aa Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/2438 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-19RTC: Use the correct index when setting the default monthDave Frodin
Change-Id: I947a8b7ccd6141f164d1e63f7b8f524efa6c00f2 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2442 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-19armv7: init stack to 0xdeadbeef to detect stack overflowsDavid Hendricks
This adds a simple loop which initializes the stack to 0xdeadbeef which is used by checkstack(). Change-Id: I8aecf7bfb1067de68c4080c1fcb7eefa28fd04a7 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2421 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-18Persimmon: drop useless DDR3 voltage code copied from InaguaJens Rottmann
Inagua can use GPIOs 178,179 to switch VMEM to 1.5, 1.35 or 1.25 V, which it does according to data read from the SO-DIMM's SPD EEPROM. On Persimmon (according to DB-FT1 rev. D schematics) both GPIOs are unconnected, there is no way to change the 1.5 V DDR3 voltage (save unsoldering a resistor). The whole code copied over from Inagua is useless. Removed the code, instead a comment hints at Inagua, for people who do designs based on Persimmon but do have a way to change VMEM. The line ...->DDR3Voltage = VOLT1_5; is supposed to make the AGESA DDR3 code select the RAM timings for the actually supplied voltage instead of the hoped-for but unavailable lower voltage. I have no idea how to test this, but in any case it can't hurt. Change-Id: Id098e09418b665645814a6ee2d41a3bff72238ba Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2448 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-18Persimmon: disable APU PCIe port 3Jens Rottmann
According to DB-FT1 rev. D schematics the APU PCIe lane 3 is unconnected. Reflect this fact in the mainboard code. Change-Id: Ic98f4a63ef971628df7fbf97f56b80ebe7cb8517 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2447 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-18Persimmon: adapt PCIe reset code copied from Inagua to actually match PersimmonJens Rottmann
Comparing Persimmon and Inagua schematics and Coreboot code show the PCIe reset code has been blindly copied even though it doesn't suit the Persimmon at all. The Inagua can employ GPIOs 21, 25, 02 to manually reset devices on APU PCIe lanes 0/1, 2, 3 respectively. (Appearently the motivation for this is to revive buggy PCIe gen1 devices which got confused by PCIe gen2 signal training.) However the Persimmon not only doesn't support this, it even needs these 3 pins for the PCI interface! Instead it uses GPIO50 to reset devices on lanes 0-2 all at once. Lane 3 is unconnected anyway. This patch adapts the Persimmon mainboard code according to the DB-FT1 rev. D schematics. Change-Id: I05a657d9bf8cc59acc4f5174eb20375165c860c7 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2446 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-18Kconfig: string option doesn't work properly inside choice sectionJens Rottmann
At least not in menuconfig. Move it after the endchoice. Change-Id: I87d2f70e7c1fbe539cd78cb602a39335b2886d8d Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2443 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-18cbfstool: Fix compile warnings caused by incorrect data types.Hung-Te Lin
The "offset" in cbfs-mkpayload should be printed as type %lu instead of %d as `gcc` rightfully warns about. gcc -g -Wall -D_7ZIP_ST -c -o /srv/filme/src/coreboot/util/cbfstool/cbfs-mkpayload.o cbfs-mkpayload.c cbfs-mkpayload.c: In function ‘parse_fv_to_payload’: cbfs-mkpayload.c:284:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat] cbfs-mkpayload.c:296:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘long unsigned int’ [-Wformat] This warning was introduced in the following commit. commit 4610247ef1744ccabbcc6bfc441a3583aa49f7b5 Author: Patrick Georgi <patrick@georgi-clan.de> Date: Sat Feb 9 13:26:19 2013 +0100 cbfstool: Handle alignment in UEFI payloads Reviewed-on: http://review.coreboot.org/2334 Change-Id: I50c26a314723d45fcc6ff9ae2f08266cb7969a12 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2440 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 16:32:58 +0000