summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-13nb/intel/*/gma: Port ACPI opregion to older platformsPatrick Rudolph
Port the ACPI opregion implementation that resides in drivers/intel/gma to older platforms. It allows to include a vbt.bin and allows GNU/Linux to load the opregion as ASLS is being set. Windows' Intel will likely ignore it as it relies on legacy VBIOS to be loaded at 0xc0000. Tested successfully on DG43GT (x4x) with vbt.bin, with X200 (gm45) with vendor option rom and D945GCLF (i945) with fake vbt. Change-Id: I1896411155592b343e48cbd116e2f70fb0dbfafa Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/21766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-13drv/intel/gma/opregion: Add common init_idg_opregion()Matt DeVillier
Add a new common method to initialize ACPI OpRegion. * Try to locate vbt.bin in CBFS. * Try to locate VBIOS in CBFS. * Keep existing code to probe at 0xc0000. Tested on Lenovo T430 (sandybridge) using vbt.bin, tested using buggy VBIOS with wrong vbt_offset, tested with fake vbt written by NGI at 0xc0000. Tested with https://review.coreboot.org/#/c/21766/ on i945 (using fake vbt at 0xc0000), x4x (using vbt.bin) and gm45 (using vendor VBIOS). In all cases linux was successfully provided with VBT from ACPI opregion. Change-Id: I8ee50ea9900537bd9e3ca5ab0cd3f48d2acec970 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-12intel/common/pmc: Disable all GPEs during pmc_initFurquan Shaikh
If GPEs are not cleared during pmc_init, it could result in issues if standard wake events are generated while coreboot is initializing. e.g. (Observed on soraka): 1. Suspend to S3 2. Lidclose 3. Lidopen 4. EC wakes up the host using WAKE# pin 5. On wakeup, pmc_init occurs which does not clear GPEs 6. MP init enables SMI 7. In order to add wake event to elog, coreboot sets wake mask on the EC, which causes the EC to assert WAKE#. 8. Since WAKE# is asserted, it results in an SMI#. However, EC does not de-assert WAKE# until host queries and clears the host event bit (which does not happen since coreboot is stuck in handling the SMIs). This is one of the issues that can occur when GPEs are unnecessarily enabled in coreboot. Before the move to PMC common library, SKL PMC driver set all GPEs to 0 and hence this issue did not occur. This change explicitly disables all GPEs during pmc init in order to avoid any side-effects. BUG=b:67712608 TEST=Verified that device resumes fine using lidclose/lidopen to suspend and resume. Change-Id: Ic5be02a23a8dbf43c4d7adf00251639ded4a94c9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21969 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-12soc/intel/common: Clean up PMC library GPE handling APIFurquan Shaikh
1. Update gpe handling function names to explicitly mention if they are operating on: a. STD GPE events b. GPIO GPE events c. Both 2. Update comment block in pmclib.h to use generic names for STD and GPIO GPE registers instead of using any one platform specific names. BUG=b:67712608 Change-Id: I03349fe85ac31d4215418b884afd8c4b531e68d3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21968 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-12vboot: Exclude platform specific files from RW cbfsMartin Roth
Add a Kconfig option to allow platforms to exclude specific files from being copied from RO into RW sections. BUG=b:65484600 TEST=Exclude apu/amdfw from the RW cbfs sections Change-Id: I7723b63392c1620b75ceb6d8e25fe1ce2c75cf18 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-12soc/intel/cannonlake: add length information for communitiesBora Guvendik
TEST = Boot to OS, check if pinctrl probed successfully Change-Id: Ib20c955d535cd9c48175b4d3934b4699b6186874 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-12mainboard/intel/cannonlake_rvp: Add Sleep statesVaibhav Shankar
Add sleep state to DSDT table. Change-Id: Ic14e34e29d5f881949765dee5c6b433c1499c491 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/21976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-12soc/intel/cannonlake: Add ACPI platform sleep capabilityVaibhav Shankar
Add the required ACPI sleep states Change-Id: I7750062554f087e4f88da56790e4122d5fa20529 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/21975 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-12soc/amd/stoneyridge: Clean up sata.cRichard Spiegel
Clean up ahci_ptr declaration. Remove incorrect PCI device IDs. BUG=b:62200375 Change-Id: I9058d9102fc8ea0bd03ea089ba98da4590dd3533 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/21973 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-12siemens/mc_bdx1: Add delay to wait for legacy devicesWerner Zeh
Like happend in commit efd0eb35af5e5620331d885d3140c734a6fc9098 (siemens/mc_apl1: Add delay to wait for legacy devices) add the feature to mc_bdx1 as it uses the same legacy devices. Change-Id: I355a53ce7aea70098d7bc08f24dc6a4e43d1d618 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/21933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-10-12intel/fsp_broadwell_de: Add timestamp functionalityWerner Zeh
Add a little code to enable timestamps on FSP based implementation of Broadwell-DE. I have tested it by reading back the timestamps with cbmem utility once the board has booted into Lubuntu. Change-Id: Idaa65a22a00382bf0c37acf2f5a1e07c6b1b42d9 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/21932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-12sb/amd/sb700/lpc.c: Optimize code flow for less indentationArthur Heymans
This changes the code flow so less indentation has to be used. This also changes some lines to limit their length. Change-Id: I50ca99a759a276e9d49327c6ae6c69eeab2a8c90 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21234 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-12nb/intel/sandybridge/raminit: Fix setting scramble seed for CH1Arthur Heymans
The scramble seed intended for CH1 were written to the regs of CH0. Write the scramble seed for CH1 at the correct offset. TESTED on Lenovo T430, HP 2760P, Asrock B75PRO3-M. Change-Id: I3778947e96b3298c38e6d5b74988e617e1ffea7b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Iru Cai <mytbk920423@gmail.com>
2017-10-12soc/intel/skylake: Enable bus master for sataKane Chen
The bus master needs to be enabled so that the busy bit in AHCI PORT_TFDATA will be cleared by controller when depthcharge tries to wait for sata to complete spin-up during AHCI init. Otherwise, the timeout will happen and cause 5 seconds delay in depthcharge. BUG=b:37639063 BRANCH=none TEST=verify that the sata timeout is gone in depthcharge Change-Id: I19eadbb2943fda8a5babc82ca87b1ecaab5e2ed8 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/21890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-11mainboard/google/kahlee: Add EC_IN_RW flagMartin Roth
Depthcharge was complaining that the GPIO for this flag wasn't set. The GPIO also needs to be an input, not an output. BUG=b:67614692 TEST=Depthcharge no longer complains that there is no GPIO set for flag5. The system boots again. Change-Id: Ib854e97b0a3aa42a95ceb8a42a9776f0345ff8b1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-11soc/intel/cannonlake: Change default UART number to 2Lijian Zhao
Set default UART number to 2 if 32bit PCI got selected, the proper debug print can be seen from serial port in case of switch between platforms, especially when change to lpss uart from legacy uart or vise versa. Change-Id: If2e0e8c8ac86e49a245f3d1d4722d40be9c01e25 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21544 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-11mainboard/google/fizz: Enable Devslp for SATA port 1Gaggery Tsai
This patch is to enable the support of device sleep for SATA port 1 and disable unused SATA port 0. BUG=b:65808359 BRANCH=None TEST=Ran "suspend_stress_test -c 2500" and passed the test. Change-Id: I33b8f5fd0c51d83e154ef7daac3274ff377bc8b3 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com>
2017-10-11util/gitconfig: remove cborg2cros.pyPatrick Georgi
util/scripts/gerrit-rebase and cross-repo-cherrypick serve the same purpose and we don't need two of everything. Change-Id: I66a71033a8a29249d214db4c31a67f8a0725163c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21926 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-10vboot: use cbfstool truncatePatrick Georgi
Instead of a shell based parser for cbfstool print -k output. BUG=b:65853903 BRANCH=none TEST=`abuild -x -t GOOGLE_KEVIN -p none` creates a valid-looking image. Change-Id: I33b7e1c483a69e66e82541c09582be2a71356a10 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-10-10util/cbfstool: Add "truncate" commandPatrick Georgi
It does the opposite to "expand", removing a trailing empty file from CBFS. It also returns the size of the CBFS post processing on stdout. BUG=b:65853903 BRANCH=none TEST=`cbfstool test.bin truncate -r FW_MAIN_A` removes the trailing empty file in FW_MAIN_A. Without a trailing empty file, the region is left alone (tested using COREBOOT which comes with a master header pointer). Change-Id: I0c747090813898539f3428936afa9d8459adee9c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-10soc/intel/skylake: Fix broken suspend/resume for deep S3Furquan Shaikh
Change d3476809 (soc/intel/skylake: Add support in SKL for PMC common code) changed the logic for obtaining previous sleep state by unconditionally checking for PWR_FLR and SUS_PWR_FLR. In case of deep S3, SUS_PWR_FLR is set in gen_pmcon_b (just like resume from deep S5/G3) and hence the check for power failure should be done only when WAK_STS bit is not set. This is necessary to differentiate wakes from deep S3 and G3. This change restores the original logic by performing power failure check only in cases where WAK_STS bit is not set. BUG=b:67617726 TEST=Verified following: 1. When WAK_STS bit is not set and SUS_PWR_FLR is set, coreboot correctly identifies that the system prev sleep state was S5. 2. When WAK_STS bit is set and SUS_PWR_FLR is set, coreboot correctly identifies that the system prev sleep state was S3. Change-Id: Ic97bbc9911ba34aa21f4728c77fc20c5bb08f6f9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-10mb/google/poppy/variants/nautilus: add nautilus boardChris Wang
Create Nautilus board which derives from Poppy, a KBL reference board. BRANCH=master BUG=b:66462881 TEST=Build (as initial setup) Change-Id: I6ca5ab821a7ba1746b37dfd3ea1ed367094d4f52 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/21895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-10ec/lenovo/h8: Serialize control method _CRSPaul Menzel
``` dsdt.aml 1461: Method (_CRS, 0) Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) ``` Change-Id: Iaf9455b16b061b32248139a85890f49de7467261 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-09skylake mainboards: Use PAD_CFG_GPI_GPIO_DRIVER instead of PAD_CFG_GPIFurquan Shaikh
Change 1760cd3e (soc/intel/skylake: Use common/block/gpio) updated all skylake boards to use common gpio driver. Common gpio code defines PAD_CFG_GPI without GPIO_DRIVER ownership. However, for skylake PAD_CFG_GPI set GPIO_DRIVER ownership by default. This resulted in Linux kernel failing to configure all GPIO IRQs since the ownership was not set correctly. (Observed error in dmesg: "genirq: Setting trigger mode 3 for irq 201 failed (intel_gpio_irq_type+0x0/0x110)") This change fixes the above issue by replacing all uses of PAD_CFG_GPI in skylake mainboards to PAD_CFG_GPI_GPIO_DRIVER. BUG=b:67507004 TEST=Verified on soraka that the genirq error is no longer observed in dmesg. Also, cat /proc/interrupts has the interrupts configured correctly. Change-Id: I7dab302f372e56864432100a56462b92d43060ee Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-09mainboard/intel/cannonlake_rvp: enable NVMe SSDBora Guvendik
Turn on PCIe express port 9 of PCIe controller 3, to enable NVMe SSD via M.2 socket 3 on RVP board. TEST=Boot to OS using Intel NVMe SSD Pro 6 Change-Id: I2fd1cdcf2d9718bf2042262b0c9813811a706b4a Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21908 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-09soc/intel/*lake: Load vbt when it's neededPatrick Georgi
That removes the need for another global variable. Change-Id: I25e12ba724836de4c8afb25cd347cafe6df8cea9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21907 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-08google/cyan: fix variant memory/silicon init params overrideMatt DeVillier
The mainboard_memory_init_params() and mainboard_silicon_init_params() methods already have weak definitions in drivers/intel/fsp1_1, so having them declared as weak in the cyan baseboard has the effect of them not being called at all unless overridden at the variant level. Therefore, remove the weak declarations in the baseboard and ensure that each variant has its own init functions if needed. TEST: build/boot google/cyan Change-Id: I1c76cb5838ef1e65e72c7341d951f9baf2ddd41b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-08Update URLs in buildgccDoug Gale
Change http to https on many URLs and update llvm.org URLs in buildgcc. The old URLs are deprecated and now switched to a http forwarder that can be attacked by MITM attacks. Change-Id: I68d4fe1a6236ed8540803e11cfc84e44a1d1ca35 Signed-off-by: Doug Gale <doug16k@gmail.com> Reviewed-on: https://review.coreboot.org/21729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-08mb/google/poppy/variants/soraka: Add 10ms reset delay for WCOM deviceFurquan Shaikh
Change 868b3761 (mainboard/google/soraka: Reduce Wacom resume time) removed the delay after taking device out of reset since it seemed unnecessary in system resume case (because there is enough time after taking device out of reset and before communication with device starts). However, without the delay, kernel driver runs into issue while talking to the device during boot-up and runtime suspend/resume. (Observed this error in dmesg: "i2c_hid i2c-WCOMCOHO:00: failed to change power setting."). Thus, add 10ms delay after taking device out of reset. Verified on multiple Soraka system that with 10ms delay, kernel driver does not run into any issue talking to the WCOM device during boot-up, runtime suspend/resume and system suspend/resume. BUG=b:65358919 TEST=No more errors talking to WCOM device in kernel dmesg. Change-Id: I485b753cbae4b653e74337e048aea4d26ffdbb81 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rajat Jain <rajatja@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-08ec/google/chromeec: Add library function google_chromeec_events_initFurquan Shaikh
mainboard_ec_init implemented by all x86-based mainboards using chromeec performed similar tasks for initializing and recording ec events. Instead of duplicating this code across multiple boards, provide a library function google_chromeec_events_init that can be called by mainboard with appropriate inputs to perform the required actions. This change also adds a new structure google_chromeec_event_info to allow mainboards to provide information required by the library function to handle different event masks. Also, google_chromeec_log_device_events and google_chromeec_log_events no longer need to be exported. Change-Id: I1cbc24e3e1a31aed35d8527f90ed16ed15ccaa86 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-06google/zoombini: adapt to schematic changesNick Vaccaro
Adapt code to latest schematic changes, revision 1.1. Configure GPD2 for EC_PCH_WAKE_ODL, GPP_D5 for EC_I2C_SENSOR_SDA, GPP_D6 for EC_I2C_SENSOR_SCL, GPP_D7 for WWAN_SAR_INT_ODL, GPP_D9 for touchscreen power enable, GPP_D10 for wifi power enable, GPP_D11 for wwan power enable, GPP_D13 change to "No Connect" (was VOL_UP_ODL), GPP_D14 change to "No Connect" (was VOL_DOWN_ODL). BUG=b:66265441 BRANCH=None TEST=None Change-Id: Ic9e76ed3e958c1f96deb6356d6480c6ba7cfe699 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/21900 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-06soc/intel/skylake: use locate_vbt directly instead of calling a wrapperPatrick Georgi
Change-Id: I65c423660ab1778f5dd9243e428a4d005bd1699a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-06soc/intel/common: refactor locate_vbt and vbt_getPatrick Georgi
Instead of having all callers provide a region_device just for the purpose of reading vbt.bin, let locate_vbt handle its entire life cycle, simplifying the VBT access API. Change-Id: Ib85e55164e217050b67674d020d17b2edf5ad14d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-06soc/intel/common: refactor locate_vbtPatrick Georgi
All callers of locate_vbt just care about the file content and immediately map the rdev for its content. Instead of repeating this in all call sites, move that code to locate_vbt. Change-Id: I5b518e6c959437bd8f393269db7955358a786719 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-06mainboard/google/reef: Override VBT selection in coralPatrick Georgi
Change-Id: I7fd667b1cf0b7c2a5e4ab7ac7748d9636a52ae54 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21725 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-06soc/intel/common: Allow overriding CBFS filename of VBTPatrick Georgi
When reusing the same image across multiple devices, they sometimes need different VBTs, so provide a hook for mainboard code to specify which file is required. Change-Id: Ic7865dc0e0c9ea3077b749d9d0482079877e9c4f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21724 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-06soc/intel/cannonlake: Enable MRC cacheLijian Zhao
Enable MRC cache by default. TEST=Warm reset and check coreboot serial log, MRC related log can be seen. Change-Id: I76ece361867737c01cc848c24d8893d43a3d292e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-06soc/intel/cannonlake: reduce bootblock sizeAaron Durbin
Reduce the bootblock size to 16KiB from the default 64KiB. Not all that space is necessary. Change-Id: I5c15d0af0f85282b84c8983f0a015aeb45c00a07 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-06soc/intel/common: remove invalid path from Kconfig includeAaron Durbin
The src/soc/intel/common/basecode/Kconfig path does not exist. Remove the inclusion of the invalid path. Change-Id: Icbd8f310cad4246b72bc869bcf4a089ae2f0c5a3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-06autoport: Add GPL boilerplate header to not empty .c filesArthur Heymans
The idea behind this not to enforce a license on autogenerated code but is simply out of convenience in the case one wants to make the result public (in which case it needs to have these license headers). Change-Id: I1d6b48762b1249bb0becb178a30e1396bf6978fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19510 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-06autoport/bd82x6x.go: Improve gpio.c generationArthur Heymans
This generates better gpio.c files where structs are initialised as static to be able to drop some entries since those would be initialised as 0. This makes these files less cluttered since only relevant things are shown: * GPIO direction, level, invert, blink depend on GPIO mode * GPIO level is read only on input * GPIO invert is only valid on input * only show when GPIO are inverted, blinking, reset by RSMRST# Change-Id: I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-06AGESA f16kb: Enable MRC cache equivalent fastbootKyösti Mälkki
Try restoring previous memory training results from SPI flash to improve raminit speed. Change-Id: I6f4c2342e2eea6c1ecfb71da8564225b6230f51e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05drivers/intel/fsp2_0: use common code to fetch vbt.binPatrick Georgi
No need for having two of everything in the coreboot codebase. Change-Id: Ie1cdd1783dd5dababd1e97436a4ce1a4f068d5b3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/21723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05soc/intel/cannonlake: Add all the SOC level DSDT tablesLijian Zhao
Add all the SOC level DSDT tables, reference from skylake/kabylake. Change-Id: Ia72bbe87b32d37db01f8768bd8447cb6ee1567a9 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05soc/intel/skylake: Add support in SKL for PMC common codeShaunak Saha
Change-Id: I3742f9c22d990edd918713155ae0bb1853663b6f Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/20499 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-05soc/intel/common/block: Manage power state variable from common PMC blockShaunak Saha
This patch helps managing power state variables from within the library. Adds migrate_power_state which migrates the chipset power state variable, reads global power variable and adds it in cbmem for future use. This also adds get_soc_power_state_values function which returns the power state variable from cbmem or global power state variable if cbmem is not populated yet. Change-Id: If65341c1492e3a35a1a927100e0d893f923b9e68 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/21851 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05soc/amd/stoneyridge: Pass firmware dir location to amdfwtoolMartin Roth
The amdfwtool now outputs firmware that is correctly built for the new location. BUG=b:65484600 TEST=Assign PSP firmware location, build & test. Change-Id: Ifa2e99ea031fc0d9f165ae44ff6b1afef369eb28 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05src/mainboard/Kconfig: Add support for 10240 KiB ROM chipsJonathan Neuschäfer
The Dell Optiplex 790 desktop board has a logical 10MiB flash, so it needs to select BOARD_ROMSIZE_KB_10240. Provide it, so it can be used. Change-Id: I6365b0cda67fa1213c20337890157e5d658094d1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-05soc/intel/{common,apollolake}: Add checks to handle negative valuesRizwan Qureshi
Fix issues reported by coverity scan in the below files. src/soc/intel/common/block/i2c 1375440: Improper use of negative value 1375441: Improper use of negative value 1375444: Improper use of negative value src/soc/intel/apollolake/i2c.c 1375442: Unsigned compared against 0 Change-Id: Ic65400c934631e3dcd3aa664c24cb451616e7f4d Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05soc/intel/skylake: Add config for mbx command for Intersil VR C-state issuesRizwan Qureshi
Config for activating VR mailbox command for Intersil VR C-state issues. 0 - no mailbox command sent. 1 - VR mailbox command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails. BUG=b:65499724 BRANCH=none TEST= build and boot soraka. Change-Id: Ibcced31b7ba473ffa7368c90c945d07a81a368d4 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21680 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 05:56:51 +0000