summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-27cbfs: Add "struct" file type and associated helpersJulius Werner
This patch adds functionality to compile a C data structure into a raw binary file, add it to CBFS and allow coreboot to load it at runtime. This is useful in all cases where we need to be able to have several larger data sets available in an image, but will only require a small subset of them at boot (a classic example would be DRAM parameters) or only require it in certain boot modes. This allows us to load less data from flash and increase boot speed compared to solutions that compile all data sets into a stage. Each structure has to be defined in a separate .c file which contains no functions and only a single global variable. The data type must be serialization safe (composed of only fixed-width types, paying attention to padding). It must be added to CBFS in a Makefile with the 'struct' file processor. Change-Id: Iab65c0b6ebea235089f741eaa8098743e54d6ccc Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27commonlib: cbfs: Add CBFS attribute supportJulius Werner
This patch adds support for the CBFS attributes that were already introduced in cbfstool and libpayload. I'm only copy&pasting the header definitions needed for this once more. Really, we should be unifying the definitions (and possibly part of the code) from cbfstool with commonlib, but apparently that hadn't been done when this feature was introduced and I don't really have time to do it cleanly now. Also add a function to extract info from the compression attribute, which can then be used to run cbfs_load_and_decompress() on the file. Change-Id: I7b6463597757122cfe84f006c946a1658bb3acc6 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16271 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27lenovo/x200,t400: enable C4 cpu low power stateArthur Heymans
This enables the C4 low power state on the lenovo x200 and t400. It's inspired by the thread on the mailinglist: "[coreboot] Lenovo X200 running Coreboot drains 3-4W more power than with Vendor BIOS". What this does, is to enable a C3 state using MWAIT(C3) request and set the southbridge config c4onc3_enable to automatically upgrade C3 to the lower power C4 state. The latency (0x37) is the same value used by the vendor bios. With C4 enabled the idle power consumption is about ~2-3W lower. TEST= build and install on target. Use powertop top to measure power usage. To manually disable c-state to compare them, do (tested on linux 4.4): echo 1 > /sys/devices/system/cpu/cpu*/cpuidle/stateX/disable Change-Id: I1a1663a7662ebc7157a965667680688ad6a33545 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15251 Tested-by: build bot (Jenkins) Reviewed-by: Swift Geek Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-26sb/amd/sb700: Add option to increase SPI speed to 33MHzTimothy Pearson
Some SB700-based systems and ROMs support high speed (33MHz) SPI access instead of the power-on default 16.5MHz. Add an option to enable high speed SPI access in the bootblock, and set the default value to Disabled. This greatly decreases boot time on SB700-based systems, especiall when a large payload is in use. On a KGPE-D16 with a Petitboot (Linux + initramfs) payload, the command prompt was accessible within 20 seconds of power on, which incidentally is faster than the proprietary BIOS on the same machine could even reach the GRUB bootloader. Change-Id: Iadbd9bb611754262ef75a5e5a6ee4390a46e45cf Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Test: Booted KGPE-D16 with Linux payload Reviewed-on: https://review.coreboot.org/16306 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-25soc/intel/apollolake: Enable ELOGBrandon Breitenstein
Add in the base for ELOG for APL. Some PM events still need to be added but the basic events are logged here. This enables the basic functionality of ELOG for Apollolake. BUG=chrome-os-partner:55473 BRANCH=none TEST=Verified image boots on Amenia Change-Id: I8682293e5a55b3efb5fdd9f1be1f3e4bf8d0757c Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/15937 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-25intel/common: Clear wake status bits before sleepShaunak Saha
Call power management utility function clear_wake_sts from southbridge_smi_sleep before going to sleep. This is needed to clear the wake status bits in ACPI registers GPE0. BUG=chrome-os-partner:55583 BRANCH=None TEST=Verified that system goes to sleep on lidclose and powerd_dbus_suspend command issued from built-in keyboard. Change-Id: I204a59f8a19137d6a192ea2d89939eefcd5d41ce Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16299 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-25intel/apollolake: Add power management utility functionShaunak Saha
This patch adds a power management utility function to clear wake status bits in ACPI GPE0 registers. We need to call this function before going to sleep from common smi handler function. BUG=chrome-os-partner:55583 BRANCH=None TEST=Verified that system goes to sleep on lidclose and powerd_dbus_suspend command issued from built-in keyboard. Change-Id: Icd095d377c82f2e154f2e2db773f737aa49cda64 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16298 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-25vboot: consolidate google_chromeec_early_init() callsAaron Durbin
On x86 platforms, google_chromeec_early_init() is used to put the EC into RO mode when there's a recovery request. This is to avoid training memory multiple times when the recovery request is through an EC host event while the EC is running RW code. Under that condition the EC will be reset (along with the rest of the system) when the kernel verification happens. This leads to an execessively long recovery path because of the double reboot performing full memory training each time. By putting this logic into the verstage program this reduces the bootblock size on the skylake boards. Additionally, this provides the the correct logic for all future boards since it's not tied to FSP nor the mainboard itself. Lastly, this double memory training protection works only for platforms which verify starting from bootblock. The platforms which don't start verifying until after romstage need to have their own calls (such as haswell and baytrail). Change-Id: Ia8385dfc136b09fb20bd3519f3cc621e540b11a5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16318 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-24soc/intel/skylake: Bump up bootblock size to 48KFurquan Shaikh
When UART_DEBUG is enabled bootblock size grows more than the current 32K. Bump this up to 48K. Change-Id: I580137dfdc9b4ad226c866f2b23b159bd820c62c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16317 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-24soc/intel/skylake: align chromium Chrome OS configAaron Durbin
The chromium tree is currently using a different config for Chrome OS than what is being built in coreboot.org. Align those settings to reflect how skylake Chrome OS boards are actually shipped to provide proper parity between coreboot.org and chromium. Change-Id: I7ab9c1dfa8c6be03ac2125fb06cb7022f3befa97 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16313 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-24google/reef: Tune eMMC DLL settings for reef evtChiranjeevi Rapolu
Apply eMMC tuned DLL settings for reef evt. Modify comments to avoid replicating info. Add EDS reference. BUG=chrome-os-partner:55648 BRANCH=none TEST=Verify that reef evt boots to OS from eMMC. Change-Id: If3bf51f3b7d38320f504ea6fbecf7c188a94ae5c Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Reviewed-on: https://review.coreboot.org/16296 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-24drivers/spi: remove unconditional RW boot device initializationAaron Durbin
The SPI drivers for the various chipsets are not consistent in their handling of when they are accessible. Coupled with the unknown ordering of boot_device_init() being called this can lead to unexpected behavior (probing failures or hangs). Instead move the act of initializing the SPI flash boot device to when the various infrastructure requires its usage when it calls boot_device_rw(). Those platforms utilizing the RW boot device would need to ensure their SPI drivers are functional and ready when the call happens. This further removes any other systems failing to boot as reported in https://ticket.coreboot.org/issues/67. BUG=chrome-os-partner:56151 Change-Id: Ib3bddf5e26bf5322f3dd20345eeef6bee40f0f66 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16300 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-08-24soc/intel/apollolake: Add ASL methods for eMMCVaibhav Shankar
Implement PS0 and PS3 methods to support eMMC power gate in S0ix suspend and resume. BUG=chrome-os-partner:53876 TEST=Suspend and Resume using 'echo freeze > /sys/power/state'. System should resume from S0ix. Change-Id: Ia974e9ed67ee520d16f6d6a60294bc62a120fd76 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16233 Tested-by: build bot (Jenkins) Reviewed-by: Venkateswarlu V Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-24vboot/vbnv_flash: fix return value check for rdev_writeat()Aaron Durbin
The return value check was incorect and checking for failure in the success path. Fix the return value check so that it actually checks for success. BUG=chrome-os-partner:56151 Change-Id: Ie7960b89a916dec261015c97c3e0552be56b5b5d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16303 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-24vboot/vboot_common: actually provide a writable region_deviceAaron Durbin
vboot_named_region_device_rw() is supposed to provide a writable region_device. However, it was calling fmap_locate_area_as_rdev() which only provides a read-only one. Fix this. BUG=chrome-os-partner:56151 Change-Id: I6279fde32132b1b6138292c3ef771c59709e00c6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16302 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-23arch/riscv: Add functions to read/write memory on behalf of supervisor/user modeJonathan Neuschäfer
Normally machine-mode code operates completely within physical address space. When emulating less privileged memory accesses (e.g. when the hardware doesn't support unaligned read/write), it is useful to access memory through the MMU (and with virtual addresses); this patch implements this functionality using the MPRV bit. Change-Id: Ic3b3301f348769faf3ee3ef2a78935dfbcbd15fd Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16260 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Map the kernel space into RAM (2GiB+)Jonathan Neuschäfer
Change-Id: I273e9d20e02f0333f28e0fc2adcc7940578ea93e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16263 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Implement the SBI againJonathan Neuschäfer
Not all SBI calls are implemented, but it's enough to see a couple dozen lines of Linux boot output. It should also be noted that the SBI is still in flux: https://groups.google.com/a/groups.riscv.org/forum/#!topic/sw-dev/6oNhlW0OFKM Change-Id: I80e4fe508336d6428ca7136bc388fbc3cda4f1e4 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16119 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Enable U-mode/S-mode counters (stime, etc.)Jonathan Neuschäfer
Change-Id: Ie62f60b2e237fa4921384e3894569ae29639f563 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16262 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Fix unaligned memory access emulationJonathan Neuschäfer
Change-Id: I06c6493355f25f3780f75e345c517b434912696f Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16261 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23memlayout: Ensure TIMESTAMP() region is big enough to avoid BUG()Julius Werner
The timestamp code asserts that the _timestamp region (allocated in memlayout for pre-RAM stages) is large enough for the assumptions it makes. This is good, except that we often initialize timestamps extremely early in the bootblock, even before console output. Debugging a BUG() that hits before console_init() is no fun. This patch adds a link-time assertion for the size of the _timestamp region in memlayout to prevent people from accidentally running into this issue. Change-Id: Ibe4301fb89c47fde28e883fd11647d6b62a66fb0 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16270 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-08-23arch/riscv: Delegate exceptions to supervisor mode if appropriateJonathan Neuschäfer
Change-Id: I1c8127412af0f9acc5b5520dc324ac145e59a4bd Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16160 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23arch/riscv: Print the page table structure after constructionJonathan Neuschäfer
A new Kconfig option, DEBUG_PRINT_PAGE_TABLES, is added to control this behaviour. It is currently only available on RISC-V, but other architectures can use it, too, should the need arise. Change-Id: I52a863d8bc814ab3ed3a1f141d0a77edc6e4044d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16015 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23src/mainboard: Remove unnecessary whitespace before "\n"Elyes HAOUAS
Change-Id: I9789b0b3339435fbe30c69221826bf23c9b3c77b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16283 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23arch/arm & arm64: Remove unnecessary whitespace before "\n"Elyes HAOUAS
Change-Id: Ibec78b25c0f330fc8517654761803e8abf203060 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16282 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23src/southbridge: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I42cc5b8736e73728c5deec6349e8d2a814e19e83 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16281 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Omar Pakker
2016-08-23src/cpu: Capitalize CPU, APIC and IOAPIC typo fixElyes HAOUAS
Change-Id: I82e0736dc6b44cfcc57cdfdc786c85c4b6882260 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16276 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-23src/northbridge: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I6a533667c7c8ff5ec6ab9d4e1cfc51e993a90084 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16280 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-23src/include: Capitalize APIC and SMMElyes HAOUAS
Change-Id: I9b3a2cce6c6bb85791d5cde076d5de95ef0e8790 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16278 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-23emulation/qemu-i440fx: add cmos.default fileAntonello Dettori
Add cmos.default file in order to ease future testing and debugging of cmos related code. Change-Id: I7c6a0aa4e38bb08a520e4838fa216c81b50f2917 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16247 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23soc/intel/apollolake: Use CONFIG_NHLT_DMIC_2CH_16B for dmicSaurabh Satija
Update the config variable that gets set to use DMIC 2 channel blob for intel/apollolake platforms. This flag is set in mainboard. Change-Id: Ic6deb9f08d345cc45351d61a7597bc7075ee20f9 Signed-off-by: Saurabh Satija <saurabh.satija@intel.com> Reviewed-on: https://review.coreboot.org/16251 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-23nvramcui: refactor codeAntonello Dettori
Split the main() into a couple of smaller functions in order to more easily extend the payload. Change-Id: I4c2b144e2a28c6f15e360d55c49974675e6a80d2 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16248 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-23drivers/spi: be sure to call spi_init() before spi_flash_probe()Aaron Durbin
It's necessary to call spi_init() prior to calling spi_flash_probe() such that the SPI drivers can do any work required prior to performing SPI transactions. It could be argued that the drivers should handle such situations, however the SPI API implementations seem to assume the callers ensured spi_init() was called before any SPI transactions. This fixes systems that failed to boot introduced by [1]. Issue tracked in https://ticket.coreboot.org/issues/67. [1] I2aa75f88409309e3f9b9bd79b52d27c0061139c8 https://review.coreboot.org/16200 BUG=chrome-os-partner:56151 Change-Id: I2d8d5ac685833521f1efe212b07a4b61ba0d9bc3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16297 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-08-22mb/asus/kgpe-d16: Add TPM supportTimothy Pearson
The ASUS KGPE-D16 accepts an optional Infineon LPC TPM module. Expose the TPM LPC device to the host operating system. Change-Id: If500e9162bf1e233ccaa35db79452daa59a34f2f Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/16269 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-22util/scripts: Support cygwin in ucode conversion toolMarshall Dawson
Check for the existence of TMPFILE with a .exe extension and if found rename it with no extension. This allows the program to be run and removed properly. Change-Id: I26928f9b8bf82d1c07fa456a88d624f7a8838bd3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/15437 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-21mb/asus/[kgpe-d16|kcma-d8]: Fix whitespace errors in devicetree.cbTimothy Pearson
Change-Id: I49925040d951dffb9c11425334674d8d498821f0 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/16268 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-213rdparty/blobs: Update to get AGESA binary for pcengines/apu2Martin Roth
The AGESA binary for PC Engines' APU2 board was just added to the blobs directory. Update the submodule pointer to allow access. Change-Id: Ic2995f253d12d17e229526cb71dea5bf65fa36f9 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16253 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-08-20intel/skylake: Do not halt in poweroff if in SMMFurquan Shaikh
Calling halt in poweroff when in SMM prevents SLP_SMI to be triggered preventing the system from entering sleep state. Fix this by calling halt only if ENV_SMM is not true. BUG=chrome-os-partner:56395 Change-Id: I3addc1ea065346fbc5dbec9d1ad49bbd0ae05696 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16259 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-20google/chromeec: Ensure data is ready before reading itFurquan Shaikh
Before reading the data provided by EC to the host, ensure that data ready flag is set. Otherwise, it could result in reading stale/incorrect data from the data buffer. BUG=chrome-os-partner:56395 BRANCH=None TEST=Verified that lidclose event is read correctly by host on reef. Change-Id: I88e345d64256af8325b3dbf670467d09f09420f0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16258 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-20intel/apollolake: Do not halt in poweroff if in SMMFurquan Shaikh
Calling halt in poweroff when in SMM prevents SLP_SMI to be triggered preventing the system from entering sleep state. Fix this by calling halt only if ENV_SMM is not true. BUG=chrome-os-partner:56395 BRANCH=None TEST=Verified lidclose behavior on reef. Change-Id: If116c8f4e867543abdc2ff235457c167b5073767 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16257 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-20intel/apollolake: Fix typo in gpi_status_getFurquan Shaikh
sts_index is calculated incorrectly because of wrong use of parenthesis. This lead to wrong bit being checked for EC_SMI_GPI on reef and lidclose event was missed. BUG=chrome-os-partner:56395 BRANCH=None TEST=Verified that lidclose event is seen and handled by SMM in coreboot on reef. Change-Id: I56be4aaf30e2d6712fc597b941206ca59ffaa915 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16256 Tested-by: build bot (Jenkins) Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-20google/reef: Save DIMM info from SMBIOS memory HOBRavi Sarawadi
Add support for SMBIOS memory HOB save. Add DIMM 'part_num' info to be saved as part of SMBIOS memory HOB. BUG=chrome-os-partner:55505 TEST='dmidecode -t 17' and 'mosys -k memory spd print all' Change-Id: I53b4a578f31c93b8921dea373842b8d998127508 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/16249 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-20soc/intel/apollolake: Save DIMM info from SMBIOS memory HOBRavi Sarawadi
Read FSP produced memory HOB and use it to populate DIMM info. DIMM 'part_num' info is stored statically based on memory/SKU id. BUG=chrome-os-partner:55505 TEST='dmidecode -t 17' and 'mosys -k memory spd print all' Change-Id: Ifcbb3329fd4414bba90eb584e065b1cb7f120e73 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/16246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-20drivers/intel/fsp2_0: Add SMBIOS memory HOB supportRavi Sarawadi
Add SMBIOS memory GUID and functions to retrieve HOB. BUG=chrome-os-partner:55505 TEST='dmidecode -t 17' and 'mosys -k memory spd print all' Change-Id: Ie7e2239bb691c748d9fd852c3dc8cdc05243b164 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/16245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-08-19rockchip/rk3399 & gru/kevin: support sdram 933MHz on kevinLin Huang
We should be running faster. Faster = better. BRANCH=None BUG=chrome-os-partner:54873 TEST=Boot; stressapptest -M 1028 -s 10000 Change-Id: I7f855960af3142efb71cf9c15edd1da66084e9d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 51bfd2abb1aba839bd0b5b85e9e918f3cc4fd94d Original-Change-Id: Iec9343763c1a5a5344959b6e8c4dee8079cf8a20 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/362822 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16241 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19vboot/vbnv_flash: make I/O connection agnosticAaron Durbin
There's no need to be SPI specific w.r.t. how the flash is connected. Therefore, use the RW boot device to write the contents of VBNV. The erasable check was dropped because that information isn't available. All regions should be aligned accordingly on the platform for the underlying hardware implementation. And once the VBNV region fills the erase will fail. BUG=chrome-os-partner:56151 Change-Id: I07fdc8613e0b3884e132a2f158ffeabeaa6da6ce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16206 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19vboot: provide RW region device supportAaron Durbin
Explicitly provide a RW view of an vboot FMAP region. This is required for platforms which have separate implementations of a RO boot device and a RW boot device. BUG=chrome-os-partner:56151 Change-Id: If8bf2e1c7ca9bff536fc5c578fe0cf92ccbd2ebc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16205 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-08-19drivers/elog: use region_device for NV storageAaron Durbin
Instead of assuming SPI backing use a region_device to abstract away the underlying storage mechanism. BUG=chrome-os-partner:55932 Change-Id: I6b0f5a7e9bea8833fb1bca87e02abefab63acec3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16204 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19lib/fmap: provide RW region device supportAaron Durbin
Explicitly provide a RW view of an FMAP region. This is required for platforms which have separate implementations of a RO boot device and a RW boot device. BUG=chrome-os-partner:56151 Change-Id: Ibafa3dc534f53a3d90487f3190c0f8a2e82858c2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16203 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19soc/intel/skylake: use SPI flash boot_device_rw() for ealy stagesAaron Durbin
If the boot device is SPI flash use the common one in the early stages. While tweaking the config don't auto select SPI_FLASH as that is handled automatically by the rest of the build system. BUG=chrome-os-partner:56151 Change-Id: Ifd51a80fd008c336233d6e460c354190fcc0ef22 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16202 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 04:00:19 +0000