Age | Commit message (Collapse) | Author |
|
All cases of testing for __PRE_RAM__ have been converted
to equivalent ENV_xxx definitions from <rules.h>.
Change-Id: Ib6cd598f17109cc1072818cebe4791f7410c3428
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
After removing urara no board still uses this SoC, and there are no
plans to add any in the future (I'm not sure if the chip really exists
tbh...).
Change-Id: Ic4628fdfacc9fb19b6210394d96431fdb5f8e8f1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36491
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some types of Undefined Behavior can be determined statically at compile
time and gcc now has a set of flags that make it emit warnings in that
case instead of doing the __builtin_trap() / optimize / UD2-opcode dance
that silently breaks the resulting binary.
BUG=chromium:958270
BRANCH=none
TEST=abuild passes (probably not)
Change-Id: I3aa5ca00c9838cc7517160069310a1ef85372027
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
IASL reports unnecessary/redundant use of offset operator. These
messages are only masking usefull messages.
Add -vw 2158 so this message isn't reported.
BUG=N/A
TEST=build
Change-Id: Ie8507d3b3cb6f2e75cb87cd3e4bcc4280df27f77
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36857
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds an optional pre-RAM cache for the FMAP which most
platforms should be able to use, complementing the recently added
post-RAM FMAP cache in CBMEM. vboot systems currently read the FMAP
about half a dozen times from flash in verstage, which will all be
coalesced into a single read with this patch. It will also help
future vboot improvements since when FMAP reads become "free" vboot
doesn't need to keep track of so much information separately.
In order to make sure we have a single, well-defined point where the new
cache is first initialized, eliminate the build-time hardcoding of the
CBFS section offsets, so that all CBFS accesses explicitly read the
FMAP.
Add FMAP_CACHEs to all platforms that can afford it (other than the
RISC-V things where I have no idea how they work), trying to take the
space from things that look like they were oversized anyway (pre-RAM
consoles and CBFS caches).
Change-Id: I2820436776ef620bdc4481b5cd4b6957764248ea
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
Add support for x86_64 bootblock on qemu.
Introduce a new approach to long mode support. The previous patch set
generated page tables at runtime and placed them in heap. The new
approach places the page tables in memory mapped ROM.
Introduce a new tool called pgtblgen that creates x86 long mode compatible
page tables and writes those to a file. The file is included into the CBFS
and placed at a predefined offset.
Add assembly code to load the page tables, based on a Kconfig symbol and
enter long in bootblock.
The code can be easily ported to real hardware bootblock.
Tested on qemu q35.
Change-Id: Iec92c6cea464c97c18a0811e2e91bc22133ace42
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add a Kconfig option for indicating agreement to use the contents of
amd_blobs. Users should only download the repo after implicitely
agreeing to AMD's License text. No formal documented agreement
is required.
Update Makfile.inc, similar to other submodules, to initialize and
checkout the submodule once the Kconfig option is selected.
Change-Id: I4ae807659db16756453dc3db2c51848291c681b8
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Reduce duplicated comments explaining that submodules' settings in
.gitmodules are update=none, and that --checkout is required. This
prepares for another submodule, and makes adding a third set of
comments unnecessary.
Change-Id: I7721333a61122284ed9975ecd2adc3271a879728
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I955dd2dc22cb3cfc4fdf1198cfd32f56475f97c9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33198
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Add cbfsoption --ibb to mark files as IBB
* Will be used by "Legacy FIT TXT" boot
Change-Id: I83313f035e7fb7e1eb484b323862522e28cb73d4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Let `sconfig` output a C header file with the symbol names that we
generate since 5e2a2cd5e7 (util/sconfig: Expose usable PCI and PNP
device names).
We add another command line argument for the path to the header
file. As the file is similar in nature to our `config.h` we simply
put it in $(obj)/ too.
Change-Id: I8f87288c82f2844b61eba6534797a42b978b47bb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This was causing a failure when building platforms with no bootblock
when building with make -jXX
Change-Id: Ic4cd4fe8ac82bd1e9ce114dbd53763538d125af3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
I'm moving the .xcompile file into the $(obj) directory so we can leave
the source pristine. We need to pass the location of .xcompile into
genbuild_h.sh.
BUG=b:112267918
TEST=Ran genbuild_h with and without an .xcompile and verified it was
passed.
Change-Id: I8b3a75b478fad92a0b09246f0a00b0580f8c4aef
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Without this, we're lacking a serialization point in abuild when doing
parallel builds. This manifests in parallel attempts to write the toada
binary, which fails.
Change-Id: Id6ebbb3750284225670608e4927d80c4eea96afb
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Variable length arrays are dangerous, so let's make sure they don't
sneak back into coreboot or any of the payloads.
Change-Id: Idf2488cf0efab51c9569a3789ae953368b61880c
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33846
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With HAVE_BOOTBLOCK=n build of bootblock-class is skipped.
Inserts an empty 64-byte bootblock-region to coreboot.rom file,
cbfstool will fill in the CBFS master header relative location
at the end.
Change-Id: Iaee9200f72f31175aca597865e3c74fc68bec8a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Ic81ed9eb2ed5255a221082326b81c375456a6499
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34300
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a utility to generate a compressed BIOS image for AMD Family 17h.
If the input is an elf file, the utility extracts the program portion
for compression. Otherwise the file is compressed as-is.
In modern AMD systems, the PSP brings up DRAM then uncompresses the
BIOS image into memory prior to x86 beginning execution. The PSP
supports a zlib engine, and interprets the first 256 bytes as a
header, where offset 0x14 containing the uncompressed size. For
further details, see AMD Platform Security Processor BIOS Architecture
Design Guide for AMD Family 17h Processors (NDA only, #55758).
BUG=b:127766506
TEST=Use with WIP Picasso
Change-Id: Id1c54e0a6dae9e4a0362c6635fe8b8aa48a369d8
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Depend on ifittool and use it to update FIT instead cbfstool FIT code.
Move the TOPSWAP / microcode handling out of cbfstool and implement it
in the Makefile.
The new FIT looks like the old one and has been tested on Broadwell-DE.
The TOPSWAP / microcode code path needs test on real hardware.
Change-Id: I687469d62557f81e9d88398cfc93182164fdac95
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Clang doesn't know `-Wlogical-op`, so let's move it into xcompile where
we can easily distinguish between the two. However, this requires us to
split out `GCC_ADAFLAGS*` from `GCC_CFLAGS*`.
Change-Id: I6a50de0bc5372f61337f237383d32645ba86b0fd
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33579
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0caeff3ff5613a594a79441e849440ebdc9a9b87
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ie0491817a3a69c9f8e6f0f0d3cb755c642819df9
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33385
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes all possible dependencies in order to build platform
with CONFIG_RAMPAYLOAD enable(without ramstage).
A. Create coreboot separate stage kconfigs
This patch creates seperate stage configs as below
1. HAVE_BOOTBLOCK
2. HAVE_VERSTAGE
3. HAVE_ROMSTAGE
4. HAVE_POSTCAR
5. HAVE_RAMSTAGE
B. Also ensures below kconfigs are aligned with correct stage configs
1. COMPRESS_RAMSTAGE and RELOCATABLE_RAMSTAGE are now enable if
CONFIG_HAVE_RAMSTAGE is selected.
2. COMPRESS_BOOTBLOCK will enable if CONFIG_HAVE_BOOTBLOCK is set
3. COMPRESS_PRERAM_STAGES will enable if CONFIG_HAVE_VERSTAGE
|| CONFIG_HAVE_ROMSTAGE is selected.
C. Also fix compilation issue with !CONFIG_HAVE_RAMSTAGE
On x86 platform:
Case 1: ramstage do exist: CONFIG_HAVE_RAMSTAGE=1
>> rmodules_$(ARCH-ramstage-y) will evaluate as rmodules_x86_32
Case 2: ramstage doesn't exist: CONFIG_HAVE_RAMSTAGE=0
>> rmodules_$(ARCH-ramstage-y) will evaluate as rmodules_
This patch fixes Case 2 usecase where platform doesn't select
CONFIG_HAVE_RAMSTAGE.
Also add option to create sipi_vector.manual based on $(TARGET_STAGE)
variable.
$(TARGET_STAGE)=ramstage if user selects CONFIG_HAVE_RAMSTAGE
$(TARGET_STAGE)=postcar if user selects CONFIG_RAMPAYLOAD
Change-Id: I0f7e4174619016c5a54c28bedd52699df417a5b7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
With the version string "TIMELESS", binaries are slightly smaller than
for a regular build. This may lead to false positive build tests if the
space is limited (e.g. bootblock). So let's make the string a little
longer.
Change-Id: I3bbf6f71d5bcd74728a3fe39734312690901d0ec
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32986
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 99e836c843e6a8536348d5cc9581b5a17512a263.
This relands commit c4ab50cdde4bfd01ec7509012b105c88bcf4c953.
The issues with -Wtype-limits in the vboot submodule have been resolved
now, so we can enable this flag again.
Change-Id: I32e8cc88e69072e7ee66cf443b578a9a8ea0ebe2
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
This reverts commit c4ab50cdde4bfd01ec7509012b105c88bcf4c953.
Reason for revert:
vboot recently was changed so that -Wtype-limits fails, and that
was just brought upstream. Since vboot internals are more likely
to be used elsewhere while -Wtype-limits is less critical, revert
this until vboot is resolved, then bring -Wtype-limits back again.
Change-Id: I9cce10462b9e57189513fa49e11fd27ebe35ba51
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32670
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables -Wtype-limits for the whole repository, which
disallows checking for a condition that must be always true or always
false based on type width (e.g. checking whether an unsigned variable is
negative or whether a 32-bit integer is larger than 4G). This helps
avoid easy to make and hard to find (because they often only affect
error paths) mistakes like
size_t size = fmap_read_area(...);
if (size < 0)
die("If only the compiler could've told me to use ssize_t instead");
Change-Id: I19edabfd092d09dad720e3fc47b44838163bfe25
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32536
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rather than selectively update the fsp submodule based on
FSP version or platform selection, update it when building
for any FSP-enabled platform, so all have latest version available.
Change-Id: If07d55828a1863623e04a4ecdd1514c3cb6d9c11
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We only grep'ed for "ACPI Warning" resulting in an actual more severe
"ACPI Error" being ignored.
Change-Id: I9cec8a388f5558b1ffc383cc2fc69405252cbb37
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Ibaa5428df1832d3f18946d456fb0b6d2fff65c32
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31694
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We used .aml as the file extension for preprocessed ASL code. That
file gets overwritten with the compilation results, fix that.
Change-Id: I11a03dfbcebb0fd762da7b27862a7bdb9a581b92
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I7b7b75050e0139ea9a0a4f2ad3c0d69a482fb38b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
If a non aligned CONFIG_CBFS_SIZE is used the region RW_MRC_CACHE and
CONSOLE could end up non aligned. Currently this is only possible if
the user messes with CONFIG_CBFS_SIZE in menuconfig, but better be
safe than sorry.
Change-Id: Ieb7e3c7112bd4b3f9733c36af21b1d59b3836811
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30420
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Put the FMAP FMAP region right above the coreboot CBFS region.
The other regions like RW_MRC_CACHE and CONSOLE often have alignment
requirements so it makes sense to put those on top. This also
simplifies the code the generate the default fmap a little.
Change-Id: I24fa6c89ecf85fb9002c0357f14aa970ee51b1df
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30419
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We generate a $(obj)/cb-config.ads once and copy it per stage that uses
it to $(obj)/<stage>/cb-config.ads (to simplify the gnat-bind step). The
Ada package is called `CB.Config`. As there was no `CB` package yet, add
that too.
Change-Id: I963a6517ef4bcf84f2c8e9ae8d24a0d6b971d2b0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Does not fix 3rdparty/, *.S or *.ld or yet.
Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/17656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Default to FSP binary and headers shiped in 3rdparty/fsp.
* Drop headers and code from vendorcode/intel/fsp1_0/broadwell_de
* Select HAVE_FSP_BIN to build test the platform
* Fetch FSP repo as submodule
* Make FSP_HEADER_PATH known from FSP2.0 useable on FSP1.0
* Introduce FSP_SRC_PATH for FSP source file
* Add sane defaults for FSP_FILE
Tested on wedge100s.
Change-Id: I46f201218d19cf34c43a04f57458f474d8c3340d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
|
|
The option to specify a binary file name was added later for platforms
that do not provide microcode updates in our blobs repository. Alas,
it wasn't visible what platforms these are. And if you specified a file
for a platform that already had one, they were all included together.
Make it visible which platforms don't provide binaries with the new con-
figs MICROCODE_BLOB_NOT_IN_BLOB_REPO, MICROCODE_BLOB_NOT_HOOKED_UP and
MICROCODE_BLOB_UNDISCLOSED. Based on that we can decide if we want to
include binaries by default or explicitly show that no files are inclu-
ded (default to CPU_MICROCODE_CBFS_NONE).
Also split CPU_MICROCODE_CBFS_GENERATE into the more explicit
CPU_MICROCODE_CBFS_DEFAULT_BINS and CPU_MICROCODE_CBFS_EXTERNAL_BINS.
And clean up the visibility of options: Don't show CBFS related options
on platforms that don't support it and don't show external file options
if the platform uses special rules for multiple files (CPU_MICROCODE_
MULTIPLE_FILES).
Change-Id: Ib403402e240d3531640a62ce93b7a93b4ef6ca5e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29934
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the `git-format' tool to sanitise coreboot commits such that
they conform to coreboot's coding style.
This fancy piece of machinary allows one to have LibFormat from
Clang to automatically check your commit conforms to coreboot's
coding style, fix any issues automatically and provides you a
diff you may review and apply at your convenience.
N.B. When the `clang-format' binary is not found we issue a warning
that the test was skipped and carry on as usual. Hence, this is
strictly non-enforcing at this current time. You may use it at your
leisure.
Change-Id: If49017ea82f0707efd47cae5978a286a9af8f3b7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: https://review.coreboot.org/c/8037
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I179264ee6681a7ba4488b9f1c6bce1a19b4e1772
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When building coreboot from scratch with 'make -j4', I sometimes see
this error:
CREATE build/mainboard/emulation/qemu-riscv/cbfs-file.wblRgZ.out (from /.../coreboot/.config)
HOSTCC cbfstool/cbfstool (link)
make[1]: execvp: build/util/kconfig/conf: Permission denied
make[1]: *** [/.../coreboot/util/kconfig/Makefile:92: savedefconfig] Error 127
It happens, I think, because the rule generated by
cbfs-files-processor-defconfig runs 'make savedefconfig', which builds
build/util/kconfig/conf, and something also builds it, at the same time.
Fix this case, by making this rule depend on $(objutil)/kconfig/conf.
The same fix is also precautiously applied to the rule for
$(KCONFIG_AUTOHEADER) in Makefile.
Change-Id: Ie93eda567f88ca08c97df7e70cdff5b07442747d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/29984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The reason for this code cleanup is the legacy
Google Purin board which isn't available anymore
and AFAIK never made it into the stores.
* Remove broadcom cygnus SoC support
* Remove /util/broadcom tool
* Remove Google Purin mainboard
* Remove MAINTAINERS entries
Change-Id: I148dd7eb0192d396cb69bc26c4062f88a764771a
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29905
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Check for PLATFORM_USES_FSP2_0 instead of MAINBOARD_USES_FSP2_0. The
latter is only valid for Skylake where we decide per mainboard if FSP2.0
is used. PLATFORM_USES_FSP2_0 is the one that actually enables the
FSP2.0 integration.
Change-Id: I3f16e5f4454c0bf02d51db5d1c267a921917f377
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
Its spreading copies got out of sync. And as it is not a standard header
but used in commonlib code, it belongs into commonlib. While we are at
it, always include it via GCC's `-include` switch.
Some Windows and BSD quirk handling went into the util copies. We always
guard from redefinitions now to prevent further issues.
Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
GNU make is too smart (or too stupid?) for empty recipes. In the case of
empty recipes, GNU make doesn't consider the target as updated even if
its prerequisites are. So if we told make to rebuild `build/romstage/
lib/cbfs.o` for instance, and the FMAP changed, it rerun the fmaptool
recipe (as a prerequisite) but only considered `cbfs.o` to be updated
by chance.
Just not leaving the recipes empty seems to help here. I seeemed to
remember that it wasn't that easy, but it fixes the issue for me...
Change-Id: Ic7ecb88cf7df7f2488defd47ea02255fc10a67e9
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It only happens if both USE_BLOBS and MAINBOARD_USES_FSP2_0 are enabled.
Change-Id: I46843c61d3ddf398a3c058bb571d285b596bf5c1
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/28304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Since ifdfake has been deprecated in favor of better alternatives, there
is no need to support it any further. Remove it from the build system.
Change-Id: Id62e95ba72004a1e15453e3eb75f09cb8194feb2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/28233
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There were so many pitfalls that I wrote my own version of this even-
tually. This version is inspired by the procedure of Alex Thiessen[1].
Instead of generating a `build.h` on demand, we always generate a tem-
porary version that, if it differs from the current one, is added as
a dependency.
As we use .SECONDEXPANSION on the prerequisites, special care is taken
that we won't generate the file twice. As it would be too late to add
the dependency if we'd run `genbuild_h.sh` inside a recipe, we have
to run it through the `$(shell)` function. But that brings us to the
next issue: The make variables used by `genbuild_h.sh` are not expor-
ted to this shell like they would be in a recipe. So we export them
manually. We could also make these variables explicit parameters of
`genbuild_h.sh` instead.
An alternative to always creating the temporary `build.h` would be
to add a phony target as dependency instead, and finally calling
`genbuild_h.sh` again in case we need an update. But, um, we create
so many files anyway...
[1] https://review.coreboot.org/25685
Change-Id: I311cf610eabae873c70f2985fc7a09acec8061f0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/28197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: Id2d2ed0fa97f2cef5818a8508bb8ee3ddba73647
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/26060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
To install this hook, run
make install-git-commit-clangfmt
This will install a pre-commit-msg hook that runs clang-format
on all .c and .h files that are staged.
It will add a clang-formatted-by: <git username>
line to the commit message to indicate that clang-format
was run on the files and that further processing of them
is not needed.
Change-Id: I1773f55b5b4677dad8f4bea017b6328fd93df20c
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/27779
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|