summaryrefslogtreecommitdiff
path: root/payloads/coreinfo
AgeCommit message (Collapse)Author
2017-06-27coreinfo: Use regular `if` over `#if` for `IS_ENABLED`Nicola Corna
When using the regular `if` construct, the compiler will check the guarded code independently from the condition. Change-Id: I00c5c7ae3720f75aa9415edb94cd2ce76cee8aee Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-07payloads: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I2ec18ca55e0ea672343a951ab81a24a5630f45fd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-04-20Turn CBMEM console into a ring buffer that can persist across rebootsJulius Werner
This patch allows the CBMEM console to persist across reboots, which should greatly help post factum debugging of issues involving multiple reboots. In order to prevent the console from filling up, it will instead operate as a ring buffer that continues to evict the oldest lines once full. (This means that if even a single boot doesn't fit into the buffer, we will now drop the oldest lines whereas previous code would've dropped the newest lines instead.) The console control structure is modified in a sorta backwards-compatible way, so that new readers can continue to work with old console buffers and vice versa. When an old reader reads a new buffer that has already once overflowed (i.e. is operating in true ring buffer mode) it will print lines out of order, but it will at least still print out the whole console content and not do any illegal memory accesses (assuming it correctly implemented cursor overflow as it was already possible before this patch). BUG=chromium:651966 TEST=Rebooted and confirmed output repeatedly on a Kevin and a Falco. Also confirmed correct behavior across suspend/resume for the latter. Change-Id: Ifcbf59d58e1ad20995b98d111c4647281fbb45ff Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18301 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-24build system: don't run xcompile or git for %clean/%config targetsPatrick Georgi
It takes a long time for no gain: We don't need to update the submodules, we don't need to fetch the revision, we don't need to find the compilers, when all we want to do is to manipulate the .config file or clean the build directory. Change-Id: Ie1bd446a0d49a81e3cccdb56fe2c43ffd83b6c98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18182 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-13coreinfo: make the CBFS list scrollableBen Gardner
This enables viewing more than ~20 files in the file list on the left. Arrows are added to indicate that more items are available off-screen. This mimics what was done in pci_module. Change-Id: Idd1363e1abe98ba51c795879db061cc54808da8e Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14546 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03payloads/coreinfo: Set KCONFIG_CONFIG valueMartin Roth
The KCONFIG_CONFIG value was previously keeping the value set by coreboot's makefile. That caused it to overwrite coreboot's .config, making the current coreinfo build and the next coreboot build fail with the curious error that you were building without the correct toolchain. Change-Id: I973b0c36e7227135a5c2d6d261e08889857aaaf1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16023 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Omar Pakker Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-20coreinfo: Add support to read timestampsAntonello Dettori
Read timestamps from the last boot sequence and display the information as if using cbmem -t. Tested on QEMU with a SeaBIOS payload. Change-Id: I44f1f6d6e4ef5458aca555c8a7d32cc8aae46502 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/15600 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-26coreinfo: Update MakefileMartin Roth
- Get the absolute pathname for LIBPAYLOAD_PATH - Update distclean: --correctly remove .config and .config.old - *.config doesn't match .config -- remove obsolete files from cleanup Change-Id: I6aa51b4ac2b392f786aeb12647be5073e6d02df5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14485 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-21coreinfo: Build libpayload in coreinfo directoryIru Cai
When building libpayload, make the build directory and .config outside libpayload source directory so it'll not pollute the libpayload source and cause conflicts with other builds. Change-Id: Idcfbc7dbe4d52a3559229d8450c3efaafd33b93b Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14389 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-10coreinfo: Move time to the last lineJonathan Neuschäfer
There are more modules in a category than categories. Moving the clock down leaves more space for the list of modules. Change-Id: I536dafe32e1abb1995c8a1942d70e0d90b905612 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14255 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-18coreinfo: Allow numbers in addition to F keysStefan Reinauer
When using coreinfo on a serial console (at least with gtkterm, picocom and minicom on Ubuntu 15.10) you can't send F keys to the payload. Allow 1..9 for F1..F9 Change-Id: Ie3a11fa1de57c7345737a1ccaff177f407cd5e48 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14065 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-16coreinfo: Rename libpayload variablesStefan Reinauer
LIBCONFIG_PATH -> LIBPAYLOAD_PATH LIBPAYLOAD_DIR -> LIBPAYLOAD_OBJ Change-Id: Idd9947bac594f5b109b877aefac70b1a1d2336eb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14099 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15coreinfo: Use tinycursesStefan Reinauer
When using PDcurses over a serial line, the background of coreinfo is not properly cleared. Hence use tinycurses, which was the only option when coreinfo was developed. Change-Id: I15bb6eb552cf924de98d09ef63be33ecf336c526 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14067 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-03-15coreinfo: Pretty print RAM addressesStefan Reinauer
Instead of 500, print 0x00000500 in the ram dump module. Change-Id: Id250bd99f36dad4088ab88953fb371c400b4231b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14072 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13coreinfo: Remove the LAR moduleJonathan Neuschäfer
Since libpayload's LAR support was dropped in If6e36569cd, this module doesn't compile anymore. Change-Id: I98f25613a1728e94704d9e9ccb65fd6ba33968b9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14037 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-11codebase: Change makefile $(shell pwd) commands to $(CURDIR)Martin Roth
- Change the makefile command $(shell pwd) to $(CURDIR) to find the current directory without going out to the shell. Change-Id: I4890eba6129630acd2883b92de77308d39949443 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13967 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11coreinfo: Fix libpayload to not install to libpayload/libpayloadMartin Roth
Libpayload installs into the libpayload/ directory under the directory you point it to. Since we were pointing it to build/libpayload, it was installing to build/libpayload/libpayload. Change-Id: I11029fcfb232d9b66eb3f310fa9e663236d4b213 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13966 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11coreinfo/nvram: Print correct line numbersJonathan Neuschäfer
With this patch the numbers are the "base" addresses for the lines, which is consistent with the PCI configuration space view. Change-Id: I2c70d976f6f9f9f615d13bc7a634d6f8037e0c7b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14028 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-11coreinfo: Default to first non-empty categoryJonathan Neuschäfer
... instead of the overall first one. Change-Id: If9b2674ff2ef83b7c24a3388316b6f4128bc1007 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14027 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11coreinfo/cbfs: Add some missing file typesJonathan Neuschäfer
An alternative to this patch is to copy the filetypes table from util/cbfstool/cbfs.h and use that. Change-Id: Iebf3a7a8912761ff6825a6f51c8b68df0dcc5990 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14026 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11coreinfo: Show "No modules selected" when appropriateJonathan Neuschäfer
Change-Id: I7222544757587b37e0cf632aa01d042414dde223 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14025 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11coreinfo/cbfs: Don't assume that the free space is at the endJonathan Neuschäfer
On emulation/qemu-i440fx, I get this layout: Name Offset Type Size cbfs master header 0x0 cbfs header 32 fallback/romstage 0x80 stage 14284 fallback/ramstage 0x38c0 stage 42382 fallback/payload 0xdec0 payload 1165052 config 0x12a600 raw 352 revision 0x12a7c0 raw 572 cmos_layout.bin 0x12aa40 cmos_layout 772 fallback/dsdt.aml 0x12ad80 raw 4000 img/coreinfo 0x12bd80 payload 1165052 (empty) 0x2484c0 null 1799192 bootblock 0x3ff900 bootblock 1456 ... which coreinfo displays in the following way, without this patch: cbfs master header fallback/romstage fallback/ramstage fallback/payload config revision cmos_layout.bin fallback/dsdt.aml img/coreinfo <free space> Change-Id: I21eb1dfbe52921843d28683c9396e9b27caa4fbf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14024 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11coreinfo/Makefile: change $(obj) to $(coreinfo_obj)Martin Roth
- Rename obj to coreinfo_obj so it doesn't conflict with the obj variable in libpayload. Change-Id: I2ffb06a87e30a5eeff5b0dfc0ba62b5e9ab46e26 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13938 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11coreinfo: Remove .xcompile when doing a cleanMartin Roth
Change-Id: I3e719e105c4bacd5e02e055d3f00650a1e126656 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13965 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-28coreinfo: quote $(AS) and $(CC) in $(LPAS) and $(LPCC)Iru Cai
Without this change it'll get a build error with crossgcc-x64 because $(AS) is "util/crossgcc/xgcc/bin/x86_64-elf-as --32", and running $(LPAS) (i.e. AS=$(AS) lpas) will run "--32" instead of "x86_64-elf-as". Change-Id: I95e5630cb1d4f1ce81a8ca8a7bf338450b325f02 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/13845 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-02payloads/coreinfo: Add defaultbuild targetMartin Roth
Add a single target to do the full coreinfo build using default Kconfig values for both coreinfo and libpayload. Change-Id: Id622fb2df480e826f6d868dbe01385d76587be26 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13426 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-02coreinfo: use coreboot crosscompilerMartin Roth
Set up coreinfo makefile to use .xcompile and the coreboot 32-bit cross compiler toolchain. Restrict to x86_32 gcc compiler. Tested in QEMU Change-Id: I1cc180a5eeaf6cb9a36fdcef70a9819d0f459168 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12454 Tested-by: build bot (Jenkins) Tested-by: BSI firmware lab <coreboot-labor@bsi.bund.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-21coreinfo: Rewrite bootlog_moduleYasha Cherikovsky
The old bootlog_module implementation was completely broken: - It assumed that the console buffer is located at address 0x90000, and of size 64K. It is not correct nowadays. - It displayed the buffer in a very hacky way, the code was riddled with TODOs and FIXMEs. Scrolling had sometimes unexpected behavior. The new implementation: - Uses the cbmem console as the source of data. It takes the console information from lib_sysinfo of libpayload, which is constructed from the coreboot tables (no more hardcoded adressess). - Properly sanitizes the console buffer for display, which makes scolling and display much easier to implement. Change-Id: I3f87ec920631da2acfd3f52273228703f22f469f Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com> Reviewed-on: http://review.coreboot.org/12440 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-19coreinfo: Move screen dimensions to headerYasha Cherikovsky
The screen dimensions need to be known in other files. Change-Id: Idf6f02e4cadbece78096ccd464296ecec405574d Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com> Reviewed-on: http://review.coreboot.org/12439 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-19coreinfo: Fix off-by-one in displayed month of yearYasha Cherikovsky
According to C documentation, the range of tm_mon in struct tm is [0, 11]. Before the patch, the displayed month was indeed incorrect. Change-Id: I9f95f1e978c45b3635e2edfe1ec496d7b0dec00a Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com> Reviewed-on: http://review.coreboot.org/12438 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-19coreinfo: Hide blinking cursorYasha Cherikovsky
Change-Id: I6297fc178203dcfbd0b2a4c78dd83359e7804933 Signed-off-by: Yasha Cherikovsky <yasha.che3@gmail.com> Reviewed-on: http://review.coreboot.org/12437 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-17coreinfo: reboot when finishedMaxime de Roucy
Behave as nvramcui. Avoid a "General Protection Fault Exception" when launched by SeaBIOS on pcengines APU1. Change-Id: I00b1f859f76e693e8d49a38c1e02f4f49add85b7 Signed-off-by: Maxime de Roucy <maxime.deroucy@gmail.com> Reviewed-on: http://review.coreboot.org/11731 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-13coreinfo: Fix build output (cosmetical)Stefan Reinauer
This patch aligns the output of coreinfo with the output of libpayload, and switches from using $(Q) to .SILENT Change-Id: I6c3cdda7febc02bab9195fc98f46490c0d478a9a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10744 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-07-13coreinfo: fix compilationStefan Reinauer
- extra rule for config.h creation - include kconfig.h from libpayload - libpayload symbols are conflicting with gcc builtins (e.g. log2) - ALIGN() is already defined in libpayload these days - move libpayload build directory under build/ Change-Id: I2aefdde26853253d58f6cf6e186e784871c1cb5b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10717 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01coreinfo: use coreboot's kconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I99e612dca3c2e5678d43b3e85eaf2f51d8f693e7 Reviewed-on: http://review.coreboot.org/10715 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-01coreinfo: Use IS_ENABLED() to query Kconfig variablesStefan Reinauer
This will make the code work with the different styles of Kconfig (emit unset bools vs don't emit unset bools) Roughly, the patch does this, and a little bit of fixing up: perl -pi -e 's,ifdef (CONFIG_.+?)\b,if IS_ENABLED\($1\),g' `find . -name *.[ch]` perl -pi -e 's,ifndef (CONFIG_.+?)\b,if !IS_ENABLED\($1\),g' `find . -name *.[ch]` Change-Id: Ia461a33541f58ff39e984119c44ece7e6c05608a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10713 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-30coreinfo: Drop local Kconfig copyStefan Reinauer
Change-Id: Ice29e63149b97de1b943b3655b984b0ce13a42ba Reviewed-on: http://review.coreboot.org/10714 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-05-23payloads/coreinfo/multiboot_module.c: Trivial fix indentsEdward O'Callaghan
Stylistic fix-up's. Change-Id: I0cad7c860280d0d8dcb16d052846c72f690e2b65 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5731 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-09payloads/coreinfo/README: Use `It is` instead of `Its`Paul Menzel
Change-Id: Ic1a9f2f01c26ee97cd7183fcf1755cb916f1b02e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5704 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-13coreinfo: Build libpayload from coreinfo makefileMarc Jones
Build libpayload and install it in the coreinfo directory. Allows coreinfo to be built with a single make command. Change-Id: I56982265555aae16e482b0a0040989c1f5317423 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1995 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-12-12coreinfo: changes to get the USB keyboard workingDave Frodin
A call to usb_initialize() was needed. Also needed to set several curses flags. One to prevent keystrokes echoing to the display, and one to allow extended keystrokes (like the KEY_F(n)) to be seen when calling getch(); Change-Id: I495b42055a54603e4efb92b2845051434d88432d Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1983 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-12-08coreinfo: Make better calls to libpayload build scriptsMarc Jones
Set LPGCC and LPAS so that CC and AS are maintained. Clean up the makefile order to check for .config to be easier to read. Use objcopy instead of strip and keep the debug symbols file. Change-Id: I95d6b7a0e3a99a142d3fd6e2ecc61de1d4412402 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1994 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-07coreinfo: change the foreground/background colorsDave Frodin
The default curses library changed from tinycurses to PDCurses. PDCurses fails to fill the entire active screen with the assigned background colors when it writes 'blank' chars. This will allow the menues to look better until I resolve that. Change-Id: I70b5331d16dd0abaa1f0b02b725571844b7ac15e Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/1984 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-30Add multi-architecture support to cbfstoolDavid Hendricks
This is an initial re-factoring of CBFS code to enable multiple architectures. To achieve a clean solution, an additional field describing the architecture has to be added to the master header. Hence we also increase the version number in the master header. Change-Id: Icda681673221f8c27efbc46f16c2c5682b16a265 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1944 Tested-by: build bot (Jenkins)
2012-11-08Refactor the endianness conversion functions and header files.Gabe Black
The endianness of an architecture is now set up automatically using Kconfig and some common code. The available conversion functions were also expanded to go to or from a particular endianness. Those use the abbreviation le or be for little or big endian. Built for Stumpy and saw coreinfo cbfs support work which uses network byte order. Used the functions which convert to little endian to implement an AHCI driver. The source arch is also little endian, so they were effectively (and successfully) inert. Change-Id: I3a2d2403855b3e0e93fa34f45e8e542b3e5afeac Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-15coreinfo: fix build error (TRIVIAL)Alexandru Gagniuc
Changes to libpayload, and lack of maintenance to coreinfo, and it no longer builds. Fix that. Change-Id: I03497880671f42b5aeb6db08ddf6ce2acd243a18 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/1453 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 21:46:16 +0000