summaryrefslogtreecommitdiff
path: root/payloads/libpayload/arch
AgeCommit message (Collapse)Author
2019-12-11printf: Automatically prefix %p with 0xJulius Werner
According to the POSIX standard, %p is supposed to print a pointer "as if by %#x", meaning the "0x" prefix should automatically be prepended. All other implementations out there (glibc, Linux, even libpayload) do this, so we should make coreboot match. This patch changes vtxprintf() accordingly and removes any explicit instances of "0x%p" from existing format strings. How to handle zero padding is less clear: the official POSIX definition above technically says there should be no automatic zero padding, but in practice most other implementations seem to do it and I assume most programmers would prefer it. The way chosen here is to always zero-pad to 32 bits, even on a 64-bit system. The rationale for this is that even on 64-bit systems, coreboot always avoids using any memory above 4GB for itself, so in practice all pointers should fit in that range and padding everything to 64 bits would just hurt readability. Padding it this way also helps pointers that do exceed 4GB (e.g. prints from MMU config on some arm64 systems) stand out better from the others. Change-Id: I0171b52f7288abb40e3fc3c8b874aee14b9bdcd6 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2019-12-05arm64: Bump exception stack size to 2KBJulius Werner
To avoid trampling over interesting exception artifacts on the real stack, our arm64 systems switch to a separate exception stack when entering an exception handler. We don't want that to use up too much SRAM so we just set it to 512 bytes. I mean it just prints a bunch of registers, how much stack could it need, right? Quite a bit it turns out. The whole vtxprintf() call stack goes pretty deep, and aarch64 generally seems to be very generous with stack space. Just the varargs handling seems to require 128 bytes for some reason, and the other stuff adds up too. In the end the current implementation takes 1008 bytes, so bump the exception stack size to 2K to make sure it fits. Change-Id: I910be4c5f6b29fae35eb53929c733a1bd4585377 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-11-20Remove MIPS architectureJulius Werner
The MIPS architecture port has been added 5+ years ago in order to support a Chrome OS project that ended up going nowhere. No other board has used it since and nobody is still willing or has the expertise and hardware to maintain it. We have decided that it has become too much of a mainenance burden and the chance of anyone ever reviving it seems too slim at this point. This patch eliminates all MIPS code and MIPS-specific hacks. Change-Id: I5e49451cd055bbab0a15dcae5f53e0172e6e2ebe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34919 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03libpayload: refactor fetching cbmem pointersPatrick Georgi
There's a recurring pattern of reading cbtable entries that point into cbmem entries. Move that pattern into its own function. Coccinelle patch used for this: @@ identifier T, T2; expression TARGET; @@ -struct cb_cbmem_tab *const T2 = (struct cb_cbmem_tab *)T; -TARGET = phys_to_virt(T2->cbmem_tab); +TARGET = get_cbmem_ptr(T); Change-Id: I7bd4a7ad8baeeaebf0fa7d4b4de6dbc719bc781f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-04-05libpayload: Align main() data typesPatrick Georgi
One of many steps to compile with -Wconversion, as unsigned int and int aren't the same thing. BUG=b:111443775 BRANCH=none TEST=make junit.xml shows fewer warnings with -Wconversion enabled Change-Id: I9673ca70da32a1e5117b27fa89167e03379af9c1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-07payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-12libpayload: arm64: Add GDB supportJulius Werner
This patch adds remote GDB support for the arm64 architecture. Change-Id: I2fa4dbca6c39f822f489a5e81bd052f53fda98a5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/29020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-12libpayload: gdb: Factor out gdb_handle_reentrant_exception() from arm32Julius Werner
The arm32 GDB architecture code contains a little hack that allows it to (sort of) correctly deal with a reentrant exception triggered from within the GDB stub. The main logic for this isn't really arm32 specific and could be useful for other architectures as well, so factor it out into a separate function. Change-Id: I3c6db8cecf1e86bba23de6fd2ac9fdf0cf69d3c6 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/29019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-12libpayload: arm64: Make exception handling closer to arm32Julius Werner
This patch reworks the arm64 exception handling to be more similar to how it works on arm32. This includes a bunch of features like actually saving and restoring more exception state in the exception_state structure and supporting the same sort of partial reentrancy that is useful for GDB. Since there's no instruction to directly load into or store out of SP on arm64, we can't do quite the same thing where we use that to read an exception_state_ptr variable right after exception entry when no other register is available. But we can do something very similar by (ab-)using the "high" stack pointer (SP_EL2) as a pointer to the exception_state struct and providing a function to change it. Change-Id: Ia16a1124be1824392a309ae1f4cb031547d184c1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/29018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-12libpayload: arm64: Conform to new coreboot lib_helpers.h and assume EL2Julius Werner
This patch adds the new, faster architectural register accessors to libpayload that were already added to coreboot in CB:27881. It also hardcodes the assumption that coreboot payloads run at EL2, which has already been hardcoded in coreboot with CB:27880 (see rationale there). This means we can drop all the read_current/write_current stuff which added a lot of unnecessary helpers to check the current exception level. This patch breaks payloads that used read_current/write_current accessors, but it seems unlikely that many payloads deal with this stuff anyway, and it should be a trivial fix (just replace them with the respective _el2 versions). Also add accessors for a couple of more registers that are required to enable debug mode while I'm here. Change-Id: Ic9dfa48411f3805747613f03611f8a134a51cc46 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/29017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2018-10-04libpayload/x86/exception: Add ability to ignore unknown interruptsRaul E Rangel
This will make enabling the APIC safer by ignoring unknown interrupts and not halting the system. Once all interrupt sources have been found and handled DIE_ON_UNKNOWN_INTERRUPT can be set if desired. BUG=b:116777191 TEST=Booted grunt, halted the kernel, and pushed the power button while in S5. Verified that depthcharge logged the unknown exception. APIC Init Started APIC Configured Ignoring interrupt vector 39 Change-Id: If4ed566ec284d69786c369f37e4e331d7f892c74 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04libpayload/x86/exception.c: Remove exception_install_hookRaul E Rangel
Not used by x86 code anymore. BUG=b:116777191 TEST=Validated that depthcharge can be built. Change-Id: I25ad3903989a5433ce73d657cfdb93dd1f34f7b5 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04libpayload/apic: Register a spurious interrupt vectorRaul E Rangel
We should have a spurious interrupt vector just incase we get one. The handler doesn't need to do anything. BUG=b:116777191 TEST=Booted depthcharge on grunt and inspected the register. I can't generate a spurious interrupt, so I can't validate that the handler gets called. Change-Id: I9e49e617f4375eb5eb00d0715c1902f77e2bf284 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-10-04libpayload/apic: Only ACK interrupts triggered by the APICRaul E Rangel
Only set end of interrupt (EOI) when the APIC In-Service vector matches the interrupt vector. This makes it so we don't EOI a non APIC interrupt. BUG=b:116777191 TEST=Booted grunt with APIC enabled and verified depthcharge still works. Change-Id: I00bd1e7a0fcf2fc004feadc40d22ebfefe68b384 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
As per internal discussion, there's no "ChromiumOS Authors" that's meaningful outside the Chromium OS project, so change everything to the contemporary "Google LLC." While at it, also ensure consistency in the LLC variants (exactly one trailing period). "Google Inc" does not need to be touched, so leave them alone. Change-Id: Ia0780e31cdab879d2aaef62a2f0403e3db0a4ac8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-09-12libpayload/x86/delay: Make arch_ndelay call apic_delay if delay is longRaul E Rangel
This reduces power consumption on grunt by over 3W when sitting at the depthcharge recovery screen. BUG=b:109749762 TEST=Booted grunt in the recovery screen and made sure it continued to work. Change-Id: Id079c099ee4cf6a07724241af4400063f4551668 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28245 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Julius Werner <jwerner@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-12libpayload/x86/delay: Add an x86 arch_ndelayRaul E Rangel
This method has a pause instruction to help the CPU relax a little bit. Measuring grunt it saves about 80mW. BUG=b:109749762 TEST=Made sure that grunt boots. Change-Id: I045a941ed42fcc4f2dbdd65b5cbb42d84813f50c Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28244 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-12libpayload/x86/apic: Add an apic_delay method and calibrate the timerRaul E Rangel
The apic_delay method will halt the CPU and wait for a timer interrupt to fire. I went with usec because nsec is too granular to guarantee. This method will be called from an arch_ndelay() method when the delay is large enough to justify a sleep. BUG=b:109749762 TEST=Tested it on grunt by changing the _delay method to call apic_delay(). Change-Id: I80363f06bdb22d0907f895885e607fde1c4c468d Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-12libpayload/arch/x86: Add support for initializing the APICRaul E Rangel
This is just the bare minimum required to initialize the APIC. I only support xAPIC and chose not to support x2APIC. We can add that functionality later when it's required. I also made the exception dispatcher call apic_eoi so that the callbacks won't forget to call it. BUG=b:109749762 TEST=Booted grunt and verified that depthcharge continued to function and that linux booted correctly. Also verified GDB still works. Change-Id: I420a4eadae84df088525e727b481089ef615183f Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-10libpayload/x86/gdb: Migrate to use set_interrupt_handlerRaul E Rangel
BUG=b:109749762 TEST=Verified GDB still functions by hitting Ctrl+G on the developer screen and stepping through some code. Change-Id: I723a8a95f681c500d9d8e35e49fd1d893cb1f133 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28240 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-10libpayload/x86/exception: Add ability to handle user defined interruptsRaul E Rangel
I need to setup the APIC timer to fire interrupts. I would like to reuse the existing interrupt table. So I extended it to support user defined interrupts. I just added all 255 vectors so there wouldn't need to be any additional build time configuration. I'm going to deprecate exception_install_hook and remove it in a follow up. It will be replaced with set_interrupt_handler. This way the exception lookup does not have to manage a list of callbacks, or have to worry about the order they are processed. BUG=b:109749762 TEST=Wrote an interrupt handler and fired an APIC timer interrupt and verified that vector 32 was returned. Change-Id: Id9c2583c7c3d9be4a06a25e546e64399f2b0620c Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-23libpayload/x86/exception: Add methods to enable/disable interruptsRaul E Rangel
Will be used by the APIC. BUG=b:109749762 TEST=Verified by the other cls in the stack. Change-Id: Id86f2719d98a90318ac625e09601e5dbb06e3765 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/28239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06exception: Fix segment error code maskRaul E Rangel
The segment error descriptor is actually 13 bits long. BUG=b:109749762 TEST=Verified by causing a segment error Change-Id: I3439f9ce1e8cf0c472c4eb82d74a787718c9609f Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27812 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-20libpayload/arm64: Drop unused static arrayPatrick Georgi
Fixes build with gcc8.1 Change-Id: I042f79ddfb4c249e00b5b259280289b8534f6854 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/27546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-05-01libpayload: Add raw_read_ functionsT Michael Turney
Add: raw_read_cntfrq_el0() and raw_read_cntpct_el0() Required to support Arch64 Timer Change-Id: I86aa97039304b9e9336d0146febfe1811c9e075a Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-03-23arch/arm64/armv8/mmu: Add support for 48bit VAPatrick Rudolph
The VA space needs to be extended to support 48bit, as on Cavium SoCs the MMIO starts at 1 << 47. The following changes were done to coreboot and libpayload: * Use page table lvl 0 * Increase VA bits to 48 * Enable 256TB in MMU controller * Add additional asserts Tested on Cavium SoC and two ARM64 Chromebooks. Change-Id: I89e6a4809b6b725c3945bad7fce82b0dfee7c262 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/24970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-07payloads: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I2ec18ca55e0ea672343a951ab81a24a5630f45fd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-06-07Use more secure HTTPS URLs for coreboot sitesPaul Menzel
The coreboot sites support HTTPS, and requests over HTTP with SSL are also redirected. So use the more secure URLs, which also saves a request most of the times, as nothing needs to be redirected. Run the command below to replace all occurences. ``` $ git grep -l -E 'http://(www.|review.|)coreboot.org' | xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g' ``` Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/20034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-30arm64: Align cache maintenance code with libpayload and ARM32Julius Werner
coreboot and libpayload currently use completely different code to perform a full cache flush on ARM64, with even different function names. The libpayload code is closely inspired by the ARM32 version, so for the sake of overall consistency let's sync coreboot to that. Also align a few other cache management details to work the same way as the corresponding ARM32 parts (such as only flushing but not invalidating the data cache after loading a new stage, which may have a small performance benefit). Change-Id: I9e05b425eeeaa27a447b37f98c0928fed3f74340 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-08libpayload-x86: Enable SSE and FPU when presentPatrick Rudolph
Allows to use SSE and floating point in payloads without digging to much into x86 assembly code. Tested on Lenovo T500 (Intel Core2Duo). Both floating point operation and SSE is properly working. Change-Id: I4a5fc633f158de421b70435a8bfdc0dcaa504c72 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18345 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-17libpayload: multiboot - support meminfo flagMathias Krause
Some simple implementation of the MultiBoot protocol may not pass a memory map (MULTIBOOT_FLAGS_MMAP missing in the flags) but just the two values for low and high memory, indicated by the MULTIBOOT_FLAGS_MEMINFO flag. Support those kind of boot loaders too, instead of falling back to the hard-coded values in lib_get_sysinfo(). Tested with a multiboot enhanced version of FILO. Change-Id: I22cf9e3ec0075aff040390bd177c5cd22d439b81 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18350 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-17libpayload: x86/head - implement argc/argv handlingMathias Krause
Implement the argc/argv passing as described in coreboot’s payload API: http://www.coreboot.org/Payload_API While at it, give the code some love by not needlessly trashing register values. Change-Id: Ib830f2c67b631b7216843203cefd55d9bb780d83 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18336 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-17libpayload: x86/exec - simplify and robustify the codeMathias Krause
Simplify the code by directly using the arguments on the stack as base pointer relative memory references, instead of loading them into intermediate registers first. Make it more robust by preserving all callee saved registers mandated by the C calling convention (and only those), namely EBP, EBX, ESI and EDI. Don't assume anything about the register state when the called function returns -- beside the segment registers and the stack pointer to be still the same as before the call. Change-Id: I383d6ccefc5b3d5cca37a1c9b638c231bbc48aa8 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18335 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-17libpayload: x86/main - propagate return value of main()Mathias Krause
According to coreboot’s payload API [1], the called payload should be able to return a value via %eax. Support this by changing the prototype of start_main() and pass on the return value of main() to the caller instead of discarding it. [1] https://www.coreboot.org/Payload_API Change-Id: I8442faea19cc8e04487092f8e61aa4e5cba3ba76 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18334 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17libpayload: x86/exec - fix argc/argv value passingMathias Krause
According to coreboot’s payload API [1] the argc value should be passed at stack offset 0x10, so we need to push a dummy value to comply to the API. [1] https://www.coreboot.org/Payload_API Change-Id: Id20424185a5bf7e4d94de1886a2cece3f3968371 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18333 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-15libpayload: x86/exec - fix return value passingMathias Krause
The pointer to write the return value to is in %ecx, not %eax. Writing to (%eax) leads to memory corruptions as %eax holds the return value, e.g. would write zero to address zero for a "successful" returning payload. Change-Id: I82df27ae89a9e3d25f479ebdda2b50ea57565459 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18332 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-15libpayload: x86/exec - fix libpayload API magic valueMathias Krause
According to coreboot’s payload API [1] the magic value passed to the payload should be 0x12345678, not 12345678. Fix that. [1] https://www.coreboot.org/Payload_API Change-Id: I10a7f7b1a4aec100416c5e7e4ba7f8add10ef5c5 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: https://review.coreboot.org/18331 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-13libpayload: head.S: Avoid clearing BSS (and heap) againJulius Werner
3 out of 4 architectures currently zero out the payload BSS in early assembly code, which is pointless since the code loading the payload has already done that (with a more efficient memset). ARM64 has never had any code like this and can run just fine without it. This also defeats the new optimization of moving the heap out of the BSS, since all three implementations assume that everything between _edata and _end is BSS. We should just take this out. Change-Id: I45cd2dabd94da43ff0f77e990f11c877cee6cda1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16091 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-08libpayload: arm64: Fix MMU range overlap checkJulius Werner
The ARM64 MMU code maintains a list of used ranges, to avoid mapping the DMA buffer over the coreboot tables and things like that. Unfortunately, the overlap with ranges in that list is checked with (start1 >= start2 && start1 <= end2) || (end1 >= start2 && end1 <= end2) which is not a full overlap check and misses the case where the second region is completely contained within the first. This patch replaces that code with a properly vetted primitive from Stack Overflow. BRANCH=none BUG=chrome-os-partner:54416 TEST=Observe how Kevin recovery screen now gets drawn at 10x the speed. Change-Id: I7e2706426762794e160d743bbfc40da1e26eee12 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16075 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-24arm64: Add stack dump to exception handlerJulius Werner
Some exceptions (like from calling a NULL function pointer) are easier to narrow down with a dump of the call stack. Let's take a page out of ARM32's book and add that feature to ARM64 as well. Also change the output format to two register columns, to make it easier to fit a whole exception dump on one screen. Applying to both coreboot and libpayload and syncing the output format between both back up. Change-Id: I19768d13d8fa8adb84f0edda2af12f20508eb2db Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14931 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09libpayload/arm64: Mark existing framebuffer as DMAablePatrick Georgi
If a framebuffer is already configured by coreboot, libpayload's MMU tables didn't mark its memory DMAable (unlike when libpayload set up its own framebuffer memory). BRANCH=none BUG=chrome-os-partner:52826 TEST=depthcharge's recovery screen is not corrupted anymore on kevin Change-Id: I228a861b3fdcf1298a3cfa0a054214c78ed55e70 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 889e8358a0f2f504abd9910549aa68f3992bb4e8 Original-Change-Id: I7ba79151ccc1eb605f82e1869a74b539a6be5e99 Original-Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/341092 Reviewed-on: https://review.coreboot.org/14685 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-05libpayload: mmu: Initialize the base 4GiB as device memoryhuang lin
This allows to accommodate different platforms' default configurations, memory configuration is fine tuned later during boot process. BUG=chrome-os-partner:51537 BRANCH=none TEST=none yet, the full stack of patches boots fine on EVB Change-Id: I39da4ce247422f67451711ac0ed5a5e1119ed836 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 97a9a71ade4df8a501043f9ae58463a3135e2a4f Original-Change-Id: I39da4ce247422f67451711ac0ed5a5e1119ed836 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/332384 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/13914 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-15libpayload: Move base address, stack and heap size to KconfigStefan Reinauer
This will allow more payloads to use the standard linker script instead of implementing their own. Change-Id: Ie60120769829f427ceb722109d85859b61dbde31 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14074 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15libpayload: Add comment about ARM64 exception stackStefan Reinauer
Change-Id: I8b74cbf6bdde32c90ad0510e14e899711269e57f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14075 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-19libpayload: honor TSC information under CONFIG_LP_TIMER_RDTSCAaron Durbin
When CONFIG_LP_TIMER_RDTSC is enabled honor the TSC information exported in the coreboot tables as the cpu_khz frequency. That allows get_cpu_speed() not to be called which currently relies on the 8254 PIT. As certain x86 platforms allow that device to be optional or turned off for power saving reasons, allow a path where get_cpu_speed() is no longer called. Additionally, this approach also allows the libpayload to not duplicate logic that already exists in coreboot. BUG=chrome-os-partner:50214 BRANCH=glados TEST=Confirmed in payload TSC frequency is honored instead of using get_cpu_speed(). Change-Id: Ib8993afdfb49065d43de705d6dbbdb9174b6f2c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13671 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-28arm64: mmu: Prevent CPU prefetch instructions from device memoryJimmy Huang
Set XN bit of block upper attribute to device memory in mmu. CPU may speculatively prefetch instructions from device memory, but the IO subsystem of some implementation may not support this operation. Set this attribute to device memory mmu entries can prevent CPU from prefetching device memory. BRANCH=none BUG=none TEST=build and booted to kernel on oak-rev3 with dcm enabled. Change-Id: I52ac7d7c84220624aaf6a48d64b9110d7afeb293 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7b01a4157cb046a5e75ea7625060a602e7a63c3c Original-Change-Id: Id535e990a23b6c89123b5a4e64d7ed21eebed607 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/302301 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/11722 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-07Drop "See file CREDITS..." commentStefan Reinauer
coreboot has no CREDITS file. Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11514 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 05:17:14 +0000