summaryrefslogtreecommitdiff
path: root/payloads/libpayload/drivers
AgeCommit message (Collapse)Author
2019-09-18libpayload: Use interrupt transfers for USB hubsNico Huber
In interactive payloads, the USB stack's poll procedure is implicitly called from the UI loop. Since all USB control transfers are handled synchronously, polling hubs with these slows the UI significantly down. So switch to interrupt transfers that are done asynchronously and only perform control transfers when the hub reported a status change. We use the interrupt endpoint's max packet size instead of the theo- retical transfer length of `(bNrPorts + 1) / 8` as Linux' code mentions hubs that return too much data. Change-Id: I5af02d63e4b8e1451b160b77f3611b93658a7a48 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/18499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-27libpayload/usb: add USB 3.1 GEN2 supportEric Lai
USB 3.1 GEN2 report speed type 4, add into speed enum. BUG=b:139787920 BRANCH=N/A TEST=Build libpayload and depthcharge on sarien and boot with USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22libpayload: usbmsc: Factor out usb_msc_force_init() functionJulius Werner
We're planning to have a use case with a custom USB device that implements the USB mass storage protocol on its bulk endpoints, but does not have the normal MSC class/protocol interface descriptors and does not support class-specific control requests (Get Max LUN and Bulk-Only Reset). We'd like to identify/enumerate the device via usb_generic_create() in our payload but then reuse all the normal MSC driver code. In order to make that possible, this patch factors a new usb_msc_force_init() function out of usb_msc_init() which will initialize an MSC device without checking its descriptors. It also adds some "quirks" flags that allow devices registered this way to customize behavior of the MSC stack. Change-Id: I50392128409cb2a879954f234149a5e3b060a229 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-22libpayload: usbmsc: Skip zero-length packets at end of dataJulius Werner
Some broken USB mass storage devices send another zero-length packet at the end of the data part of a transfer if the amount of data was evenly divisible by the packet size (which is pretty much always the case for block reads). This packet will get interpreted as the CSW and screw up the MSC state machine. This patch works around this issue by retrying the CSW transfer when it was received as exactly 0 bytes. This is the same mitigation the Linux kernel uses and harmless for correctly behaving devices. Also tighten validation of the CSW a little, making sure we verify the length before we read any fields and checking the signature in addition to the tag. Change-Id: I24f183f27b2c4f0142ba6c4b35b490c5798d0d21 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34485 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08libpayload: cbgfx: Allow rotation of the displayNicolas Boichat
Sometimes the display native orientation does not match the device default orientation, so allow rotation of the framebuffer before it is displayed on screen. set_pixel now take coordinates in the rotated coordinate system, and converts the coordinates before writing to the framebuffer. Also, screen.size now matches the rotated system (_not_ the framebuffer size). BUG=b:132049716 TEST=Boot krane, see that FW screen is orientation properly. Change-Id: If9316c0ce33c17057372ef5995a2c68de4f11f02 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2019-07-26libpayload/serial/qcs405: Mark uart console as suchPatrick Georgi
depthcharge prefers knowing where its input comes from BUG=b:137378326 BRANCH=none TEST=ctrl-d / enter to enter dev-mode works now. Change-Id: I74b5be18c3583be17c73950ced93fad883690090 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-09libpayload/usb: fix DWC2 driverPatrick Georgi
A typo introduced in commit bf2c693f893ab6f9458f1a4840c2a9cbbd4bb9f2 made the driver not build: DWC_SLEEP_TIME_US instead of DWC2_SLEEP_TIME_US. Change-Id: I197b25fd4f568cce7a4bbcee8cc285b25b26afb1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Keith Short <keithshort@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-02libpayload/usb: Increase USB request timeout to 5 sKeith Short
Increase the timeout for USB requests to 5 seconds for all USB host controllers. Prior to this fix, the xCHI driver was detecting false timeouts during SET ADDRESS requests when nested downstream hubs were connected to the xHCI root hub. BUG=b:124730179 BRANCH=sarien TEST=Build libpayload and depthcharge on sarien/arcada. TEST=Without change replicate USB set address timeouts in depthcharge when dock and 4K monitor connected (which includes a total of 4 USB hubs). With timeout fix, depthcharge boots OS with no USB errors and the same USB topology. Note that this tests xHCI operation only. Change-Id: I53e3e67d893420e7c9e8b52c47dd0edb979e5468 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-29libpayload: cbgfx: Run cbgfx_init() before we need it for draw_box()Julius Werner
calculate_color() uses the 'fbinfo' global that is initialized by cbgfx_init(), so we need to run the latter before we can run the former or we get a null pointer access. Change-Id: I73ca8e20ca36f64d699379d504fd41dc2084f157 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2019-06-27libpayload: Re-initialize UART RXPrudhvi Yarlagadda
UART RX needs to be re-initialized in libpayload as it is getting reset at the end of coreboot. Change-Id: I7820bd7afd2e5f81e21a43f330ed42d3a732d577 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-14libpayload/i8042/keyboard: Log errors during initializationFurquan Shaikh
Add error messages for all failed commands in keyboard_init(). Change-Id: Ie42ccbc4d850912c83e00376b27f192d5b652057 Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06Revert "libpayload: Reset PS/2 keyboard"Nico Huber
Documentation is scarce on the matter, however the related coreboot code suggests that after the ACK, the keyboard also sends the result of the self test (passed/failed). It looks like this result is never consumed here, probably resulting in further confusion for later com- mands. Let's revert this for now (if it's not too late for the 4.10 release) and break things later again. IMHO, due to the fact that there are dozens of different keyboard controller and keyboard implementations and no accurate specification followed, such changes should be tested on a lot of hardware before merge. This reverts commit a99ed13e3397bc536012120aab8cadb827913863. This reverts commit 7ae606f57f0b3d450ae748141b0e2367041b27d3. Change-Id: I4d4304d5d8a01e013feac61016c59bcaeea81140 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-04libpayload: Add UART for qcs405Prudhvi Yarlagadda
TEST=build Change-Id: I43164cf9eacc844af1d048f7b6ebbda96fc9d202 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-04libpayload/i8042/keyboard: Fix return value check for keyboard_cmdFurquan Shaikh
CB:32951 ("libpayload: Reset PS/2 keyboard") added a call to reset keyboard and check the return value of keyboard_cmd() to compare against I8042_KBCMD_ACK. However, keyboard_cmd() already checks for ACK and returns 1 or 0 based on whether ACK is received. This change fixes the check introduced by CB:32951 to compare against 0 just like the other checks for keyboard_cmd(). Additionally, it adds error messages for all failed commands in keyboard_init() to make the prints consistent in case of failure. BUG=b:134366527 TEST=Verified that logs do not contain "ERROR: Keyboard reset failed" anymore. Change-Id: Idcadaae12e0a44e404a1d98c6deb633d97058203 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-29libpayload/drivers/i8402/kbd: Fix qemuPatrick Rudolph
Reset keyboard controller to fix qemu make scan codes. Change-Id: I5f8ad2d4be4b9e89d9af3a62726259e77f0403c1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/23584 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-27libpayload: Reset PS/2 keyboardPaul Menzel
Loading a libpayload based payload like coreinfo or FILO from SeaBIOS or GRUB pressing keys does not give the expected results. For example, pressing F1 gives the character 24 translated to scan code 6a. ESC for example 43 (111) in coreinfo loaded from SeaBIOS on QEMU Q35. The problem is not reproducible using the payload directly, that means without SeaBIOS or GRUB. The problem seems to be, that those have already initialized the PS/2 controller and AT keyboard. Comparing it with coreboot’s PS/2 keyboard code, the keyboard needs to be reset. That seems to fix the issue, when the keyboard was initialized before. TEST=Build coreboot for QEMU Q35 with SeaBIOS, and coreinfo as secondary payload. Run qemu-system-i386 -M q35 -L /dev/shm -bios build/coreboot.rom -serial stdio press 3 to select the coreinfo payload, and verify that the keys F1 and F2 are working. Same with coreinfo loaded from GRUB on the ASRock E350M1. Change-Id: I2732292ac316d4bc0029ecb5c95fa7d1e7d68947 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-15libpayload: ahci: Prevent memory leaks when failing on initJacob Garber
Free several resources when AHCI initialization fails. Note that it is only safe to free resources when the command engine has stopped, since otherwise they may still be used for DMA. Found-by: Coverity CID 1260719, 1260727, 1261090, 1261098 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I6826d79338b26ff9696ab6ac9eb4c59f734687d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-13libpayload/drivers/i8042: Add fallthrough commentJacob Garber
Ctrl-delete does nothing, so it falls through to the default case. Add a comment to make this explicit. Found-by: Coverity Scan #1260878 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I4a6f51cb04696b6ebcb554c5667a5bbea58622c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-13libpayload: classify all keyboardsMatt Delco
Depthcharge uses the keyboard type to help determine whether it can trust the keyboard for security-sensitive confirmations. Currently it trusts anything except usb, but now there's a need to distrust ec-based ps/2 keyboards that are associated with untrusted ECs. To help facilitate this, coreboot needs to report more details about non-usb keyboards, so this change replaces the current instances of unknown with enum values that distinguish uart and gpio from ec-based keyboards. BUG=b:129471321 BRANCH=None TEST=Local compile and flash to systems with trusted and non-trusted ECs. Confirmed that security confirmation can't be performed via keyboard on a system with an untrusted EC but can still be performed on a system with a trusted EC. Change-Id: Iee6295dafadf7cb3da98b62f43b0e184b2b69b1e Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-17mediatek: Use the 64-bit timerTristan Shieh
GPT4 is a 32-bit timer and the counter of GPT4 will overflow in about 330 seconds (0xffffffff / 13MHz). Timer and delay functions will not work properly if the counter overflows. To fix that we should use the 64-bit timer (GPT6). BUG=b:80501386 BRANCH=none Test=emerge-elm coreboot; emerge-kukui coreboot Change-Id: I9f080e47253a1b1bab4636a45cb86c8666a25302 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com>
2019-04-11libpayload/option table: Don't pad string entries with garbageNico Huber
set_option_with() expects a buffer of the exact size of the option. Change-Id: I21332394f88cf2daa4f733a544627d6d3c6ef26c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-11libpayload/storage: Add Apollo Lake AHCI ID to tested controllersNico Huber
Change-Id: Iee244d0cd7d64934fbfc34778a45e21e97646628 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-11libpayload: keyboard: Add F11 and F12 supportMatt Delco
The firmware is basically ignoring F11 and F12 without this change. BUG=b:130143385 TEST=local compile and flash to device. Confirmed that press of F11 and F12 keys now generates appropriate keypress events (and the same codes that are already generated by these keys on an external USB keyboard). Signed-off-by: Matt Delco <delco@chromium.org> Change-Id: Ic43114aa99fc0a1345782c81ed2b90f5569af383 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-09libpayload: Fix potential NULL pointer dereferenceFrancois Toguo
Found-by: Klockwork BUG=NONE TEST=Boot to OS on GLK Sparky Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com> Change-Id: I9d4636f0429de829e746909492c2f543026a02ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/32083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-08libpayload/drivers/timer: Use 64 bits to prevent overflowJacob Garber
Cast cpu_khz to a 64 bit integer to prevent possible integer overflow (the multiplication is currently done using 32 bit math). Similar to 61dac13 (libpayload: timer: cast cpu_khz to make sure 64bit math is used). Found-by: Coverity Scan, CID 1261177 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Iadb0abb7c7cc078f31a6d88d971f5d1b8ac62a9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-07payloads: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find payloads/ -type f | \ xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I883b03b189f59b5d998a09a2596b0391a2d5cf33 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-02libpayload: i8042: Only test PS/2 AUX port when enabledDuncan Laurie
If a PS/2 AUX device is not present then the AUX test command during i8042_probe() will time out and add ~500ms to the boot time. In order to avoid this only test the PS/2 AUX port if CONFIG_LP_PC_MOUSE is enabled. BUG=b:126633269 TEST=boot on device without AUX port and check that this command does not get executed, saving ~500ms at boot. Change-Id: I2ebdecc66933bd33d320b17aa4608caf4aaf54aa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-02libpayload: keyboard: Add option to ignore failures during initDuncan Laurie
If keys are pressed at boot some keyboard controllers will not properly respond with an ACK to commands, which results in the keyboard_init function aborting before it adds the keyboard to the input device list. This same keyboard controller will manage to properly return keyboard data when keys are pressed later, so it is possible for it to be functional in the payload even if it does not respond properly to every command during initialization. In order to allow payloads to use the keyboard when this happens a new Kconfig option is added to ignore the keyboard ACK response and always add the keyboard to the input device list. This option is disabled by default and must be enabled by the specific boards that need it. BUG=b:126633269 TEST=boot on device with this controller and press keys during boot and see that the keyboard is still functional in the payload. Change-Id: Icc6053f99804f1b57d785cb04235b5c4b8d5426f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-12-09libpayload: Don't try to use invalid row countMartin Roth
console->scroll_up() was hanging when console->rows is 0. This was happening on delan if no screen was attached. If there are no rows, just return. BUG=b:119234919 TEST=Boot delan with no flat panel. System boots to OS Change-Id: Ib022d3c6fc0c9cf360809dca28761a50c787304a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/30092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2018-12-05libpayload: Remove unused timer/serial driversJulius Werner
This patch removes several timer and serial drivers (and configs) that were specific to platforms which have been dropped in coreboot. Change-Id: I589ca7f1a3b479f1c2b1b668a175a71583441ac9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/30029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2018-11-16payloads/libpayload/drivers/storage: Get rid of void pointer mathRichard Spiegel
Pointer math with void pointers is illegal in many compilers, though it works with GCC because it assumes size of void to be 1. In this particular situation, dev->buf is already pointer to u8, and there's no need to convert to void *. BUG=b:118484178 TEST=Build libpayload. Change-Id: Ib70b8ce11abc88c35be4092f097cfff385921f46 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/29442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-10-23libpayload: Fill reg_base for debugging purposesPatrick Rudolph
Fill reg_base with physical register base address. Tested on Lenovo T500. Change-Id: If42135c8e10b70d5ac9626521abd9cca3cf40053 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18600 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-15libpayload: Always set pciaddrPatrick Rudolph
For debugging purposes always set the pciaddr attribute. Tested on Lenovo T500. Change-Id: I83a0e7f7196ed251fa0becc4e56bef3ca68f20f4 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18599 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-01libpayload/drivers/usb: Fix leaksPatrick Rudolph
Don't leak buffers on device detach. Tested on qemu using: qemu-system-x86_64 -bios build/coreboot.rom -M pc -m 2048 -usb \ -device usb-ehci,id=ehci -device usb-mouse -device usb-audio,bus=usb-bus.0 \ -device usb-bt-dongle,bus=usb-bus.0 -device usb-kbd Change-Id: Ib2d80dd4590aa0dacdf2da3b614c6505c931d0be Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/23689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-01libpayload/drivers/usb: Fix broken retry counterPatrick Rudolph
Exit on first sucessful CONTROL transfer instead of doing GET_DESCRIPTOR_TRIES iterations. Tested on qemu using: qemu-system-x86_64 -bios build/coreboot.rom -M pc -m 2048 -usb \ -device usb-ehci,id=ehci -device usb-mouse -device usb-audio,bus=usb-bus.0 \ -device usb-bt-dongle,bus=usb-bus.0 -device usb-kbd Change-Id: I7c881c08d94636a43223338e46c876b5f3e27d47 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/23688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
As per internal discussion, there's no "ChromiumOS Authors" that's meaningful outside the Chromium OS project, so change everything to the contemporary "Google LLC." While at it, also ensure consistency in the LLC variants (exactly one trailing period). "Google Inc" does not need to be touched, so leave them alone. Change-Id: Ia0780e31cdab879d2aaef62a2f0403e3db0a4ac8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-08-08libpayload/drivers/usb/xhci: Replace raw values with constantsRaul E Rangel
BUG=none TEST=compiled on grunt and made sure USB still works in depthcharge Change-Id: I972f4604bb5ff3838cb15f323c5a579ad890ecf5 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-17libpayload/generic_hub: Detect port disconnect after resetRaul E Rangel
If a port disconnects after a reset we should abort any initialization on the port. This might mean the device has re-enumerated as a 3.0 device so the hub should be scanned again. BUG=b:76831439 TEST=Verified USB-C devices that get detected correctly in depthcharge. Change-Id: Iad899544684312df1bef08d69b5c7f41eac3a21c Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-17libpayload/xhci: Check noop return code when debuggingRaul E Rangel
Make it obvious that the command has failed. BUG=b:76831439 TEST=Verified on grunt Change-Id: Ifa0b2fb087f5f0a36ba017a774fc98b33ab035a4 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-17libpayload: Add UNKNOWN_SPEED to usb_speed enumRaul E Rangel
xhci_rh_port_speed return -1 if the port is disabled. The usb_speed enum is unsigned so this results in a positive value which implies success. Adding a -1 to the enum will make it signed so the >= 0 check will work correctly. BUG=b:76831439 TEST=verified on grunt that -1 is returned when port is disabled. Change-Id: I98a373717d52dfb6ca4dcc53a00dc1b4c240a919 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-16libpayload/xhci: Document struct offsets on xhci_tRaul E Rangel
This makes it easier to know what offset each register references. BUG=b:76831439 TEST=none Change-Id: I92dcbd463ceb4dd8edbbd97b51a4e9aa32a983a6 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-02payloads/libpayload/drivers/i8042: Disable scanning on disconnectFurquan Shaikh
This change ensures that keyboard scanning is disabled and keyboard is set to default state while disconnecting the keyboard. This is required to ensure that the controller doesn't keep scanning and buffering keystrokes which could lead to OS drivers reading stale data. BUG=b:110024487 TEST=Verified that kernel driver is able to probe correctly even if multiple keys are pressed during handoff from payload to OS. Change-Id: I1ffb8904d545284454c1825ee2e7c0087fc13762 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-02payloads/libpayload/drivers/i8042: Add macros for i8042 commandsFurquan Shaikh
This change adds macros for commands (written to 0x64) and keyboard commands (written to 0x60) for 8042 controller. BUG=b:110024487 Change-Id: I74b2388d048e35b5bdf5bd862d0975e88f1bd6af Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-31libpayload-x86: Export keyboard modifiersPatrick Rudolph
Add function to get active keyboard modifiers. Change-Id: Ifc7bd4aa86f20d67c5b542d0458b966e605c5499 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18601 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-31libpayload: Export usbhid_getmodifiersPatrick Rudolph
Add a new method to retrieve active usb keyboard modifiers. Change-Id: Ief6679ce782b58b9ced207f4f27504fb2a517b76 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18602 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-30libpayload-x86: i8042: fix i8042_data_ready_ps2 and i8042_data_ready_auxHannah Williams
keyboard_disconnect was called without keyboard_init being called and in this case keyboard_havechar returns true because i8042_data_ready_ps2 is dereferencing uninitialized variable ps2_fifo from within fifo_is_empty causing keyboard_disconnect to be stuck in this while loop. while (keyboard_havechar()) keyboard_getchar(); BUG=b:80299098 TEST=Check if the normal mode path in depthcharge is not causing a hang Change-Id: I944b4836005c887a2715717dff2df1b5a220818e Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/26590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-15libpayload-x86: Add PS2 mouse driverPatrick Rudolph
Make use of i8042 driver to add PS2 mouse driver support. Tested on Lenovot T500. The touchpad can be used to drive the mouse cursor. Change-Id: I4be9c74467596b94d64dfa510824d8722108fe9c Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-15libpayload-x86: keyboard: Use i8042 driverPatrick Rudolph
Make use of i8042 driver in keyboard.c. Required to add PS/2 mouse support. Tested on Lenovo T500. Change-Id: If60b5ed922b8fc4b552d0bfd9fe20c0fd6c776bf Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18596 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-15libpayload-x86: Move keyboard.cPatrick Rudolph
Move keyboard.c into i8042 folder. Change-Id: Idd30a9082e48a451d9fe5ead3f3dda4e6396b50c Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18595 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-15libpayload-x86: Add common i8042 driverPatrick Rudolph
Add a common i8042 driver that uses multiple overflowing fifos to seperate PS/2 port and PS/2 aux port. Required to support PC keyboard and PC mouse at the same time. Tested on Lenovo T500. Change-Id: I4ca803bfa3ed45111776eef1f4dccd3fab02ea39 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18594 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-30 20:51:58 +0000