summaryrefslogtreecommitdiff
path: root/payloads/libpayload/include/usb/usb.h
AgeCommit message (Collapse)Author
2020-06-06libpayload: drivers/usb: add a USB pre-poll hookCaveh Jalali
This adds a hook so that a payload can optionally perform USB service functions in conjunction with regular USB port status polling. In particular, this allows depthcharge to control the state of an external USB mux. Some SoCs like Tiger Lake have a USB mux for Type-C ports that must be kept in sync with the state of the port as reported by the TCPC. This can be achieved by hooking into the poll routine to refresh the state of the USB mux. BUG=b:149883933 TEST=booted into recovery from Type-C flash drive on volteer Change-Id: Ic6c23756f64b891b3c5683cd650c605b8630b0fb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01lp/drivers/usb: Add quirk for QEMU XHCI root hubDuncan Laurie
The QEMU XHCI driver does not implement the Port Change Detect bit in the USBSTS register. As a result no devices are attached without looking at each port individually. Detect this as a quirk based on the QEMU XHCI controller PCI ID, and apply it to the root hub quirk list so it can get used by the generic hub driver to skip this check. With this change an attached USB mass storage device is detected and able to boot when supplied to qemu: -drive if=none,id=usbmsc,format=raw,file=/tmp/disk.img -device qemu-xhci,id-xhci -device usb-storage,bus=xhci.0,drive=usbmsc Change-Id: I6689cb1dbb24c93d45f5c5ef040b713925d07588 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39839 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-26treewide: capitalize 'USB'Elyes HAOUAS
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-27libpayload/usb: add USB 3.1 GEN2 supportEric Lai
USB 3.1 GEN2 report speed type 4, add into speed enum. BUG=b:139787920 BRANCH=N/A TEST=Build libpayload and depthcharge on sarien and boot with USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02libpayload/usb: Increase USB request timeout to 5 sKeith Short
Increase the timeout for USB requests to 5 seconds for all USB host controllers. Prior to this fix, the xCHI driver was detecting false timeouts during SET ADDRESS requests when nested downstream hubs were connected to the xHCI root hub. BUG=b:124730179 BRANCH=sarien TEST=Build libpayload and depthcharge on sarien/arcada. TEST=Without change replicate USB set address timeouts in depthcharge when dock and 4K monitor connected (which includes a total of 4 USB hubs). With timeout fix, depthcharge boots OS with no USB errors and the same USB topology. Note that this tests xHCI operation only. Change-Id: I53e3e67d893420e7c9e8b52c47dd0edb979e5468 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-17libpayload: Add UNKNOWN_SPEED to usb_speed enumRaul E Rangel
xhci_rh_port_speed return -1 if the port is disabled. The usb_speed enum is unsigned so this results in a positive value which implies success. Adding a -1 to the enum will make it signed so the >= 0 check will work correctly. BUG=b:76831439 TEST=verified on grunt that -1 is returned when port is disabled. Change-Id: I98a373717d52dfb6ca4dcc53a00dc1b4c240a919 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/27476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09libpayload: xhci: Set MPS based on speedVaradarajan Narayanan
BUG=chrome-os-partner:49249 TEST=Compiles and boots and detect USB storage BRANCH=none Change-Id: I9007399e1f785e6f1d2258225e3f7cc602053aed Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1db43f53973d2124e41186777caa829aa346ace3 Original-Change-Id: I943d19a3a7d785bd075073b57ba6388662d7df90 Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Original-Reviewed-on: https://chromium-review.googlesource.com/333311 Original-Commit-Ready: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14659 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16libpayload: usb: dwc2: support split transactionYunzhi Li
With split transaction, dwc2 host controller can handle full- and low-speed devices on hub in high-speed mode. This commit adds support for split control and interrupt transfers BUG=None TEST=Connect usb keyboard through hub, usb keyboard can work BRANCH=None Change-Id: If7a00db21c8ad4c635f39581382b877603075d1a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4fb514b7f7f7e414fa94bfce05420957b1c57019 Original-Change-Id: I07e64064c6182d33905ae4efb13712645de7cf93 Original-Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283282 Original-Tested-by: Lin Huang <hl@rock-chips.com> Original-Commit-Queue: Lin Huang <hl@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10956 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14libpayload: Add dwc2 usb driverhuang lin
BUG=chrome-os-partner:29778 TEST=emerge-veyron libpayload Change-Id: I33f312a939e600b8f4e50a092bb61c5d6bc6d741 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 39ffe53336a2a3b2baa067cdd3dccca5ae93f68e Original-Change-Id: Idad1ad165fd44df635a0cb13bfec6fada1378bc8 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/211053 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9453 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-31libpayload: Fix pointer related castsFurquan Shaikh
Fix pointer related casts since this can create a problem for 64-bit systems. BUG=None BRANCH=None TEST=Compiled successfully for link, nyan using emerge-* libpayload Original-Change-Id: I4cbd2d9f1efaaac87c3eba69204337fd6893ed66 Original-Reviewed-on: https://chromium-review.googlesource.com/199564 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 914b118a64b0691aeca463dff24252db9c24109e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I11f070ed5d3eddd8b9be30c428cb24c8439e617b Reviewed-on: http://review.coreboot.org/7905 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-22libpayload: usb: Try to avoid reusing device addressesJulius Werner
We recently changed the USB stack to detach devices aggressively that we don't intend to use. This alone is not really a problem, but it exarcerbates the fact that our device detachment itself is not very good. We destroy any local info about the device, but we don't properly disable the offending port. The device keeps thinking that it's active, and if we later try to reuse that device address for another device things become confused. The real fix would be to properly disable all ports that we don't intend to use. Unfortunately, this isn't really possible in our current device/hub polymorphism structure, and I don't want to hack a new disable_port() callback into usbdev_t that really doesn't belong there. We will only be able to fix this cleanly after we ported all root hubs to the generic_hub interface. Until then, an easy workaround is to just avoid reusing addresses as long as possible. This is firmware, so the chance that we'll ever run through 127 devices is really small in practice. Even if we ever fix the underlying issue, it's probably a smart precaution to keep. BRANCH=nyan,rambi BUG=chrome-os-partner:28328 TEST=Boot from a hub that has an "unknown" device in an earlier port than the stick you want to boot from, make sure you can still boot. Original-Change-Id: I9b522dd8cbcd441e8c3b8781fcecd2effa0f23ee Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197420 Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 28b48aa69b55a983226edf2ea616f33cd4b959e2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id4c5c92e75d6b5a7e8f0ee3e396c69c4efd13176 Reviewed-on: http://review.coreboot.org/7881 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-09-04libpayload: usb: Refactor USB enumeration to fix SuperSpeed devicesJulius Werner
This patch represents a major overhaul of the USB enumeration code in order to make it cleaner and much more robust to weird or malicious devices. The main improvement is that it correctly parses the USB descriptors even if there are unknown descriptors interspersed within, which is perfectly legal and in particular present on all SuperSpeed devices (due to the SuperSpeed Endpoint Companion Descriptor). In addition, it gets rid of the really whacky and special cased get_descriptor() function, which would read every descriptor twice whether it made sense or not. The new code makes the callers allocate descriptor memory and only read stuff twice when it's really necessary (i.e. the device and configuration descriptors). Finally, it also moves some more responsibilities into the controller-specific set_address() function in order to make sure things are initialized at the same stage for all controllers. In the new model it initializes the device entry (which zeroes the endpoint array), sets up endpoint 0 (including MPS), sets the device address and finally returns the whole usbdev_t structure with that address correctly set. Note that this should make SuperSpeed devices work, but SuperSpeed hubs are a wholly different story and would require a custom hub driver (since the hub descriptor and port status formats are different for USB 3.0 ports, and the whole issue about the same hub showing up as two different devices on two different ports might present additional challenges). The stack currently just issues a warning and refuses to initialize this part of the hub, which means that 3.0 devices connected through a 3.0 hub may not work correctly. Change-Id: Ie0b82dca23b7a750658ccc1a85f9daae5fbc20e1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170666 Reviewed-by: Kees Cook <keescook@chromium.org> (cherry picked from commit ecec80e062f7efe32a9a17479dcf8cb678a4a98b) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6780 Tested-by: build bot (Jenkins)
2014-09-04libpayload: usb: Unify USB speed between XHCI stack and USB coreJulius Werner
This patch removes the confusing concept of a special "xhci_speed" with a different numeric value from the usual speed used throughout the USB core (except for the places directly interacting with the xHC, which are explicitly marked). It also moves the MPS0 decoding function into the core and moves some definitions around in preparation of later changes that will make the stack SuperSpeed-ready. It makes both set_address implementations share a constant for the specification-defined SetAddress() recovery delay and removes pointless additional delays from the non-XHCI version. Change-Id: I422379d05d4a502b12dae183504e5231add5466a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170664 Reviewed-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit f160d4439c0d7cea1d2e6b97207935d61dcbb2f2) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6776 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-28libpayload: usb: Allow direct instantiation of MMIO host controllersJulius Werner
The existing USB_MEMORY mechanism to instantiate non-PCI host controllers is clunky and inflexible... most importantly, it doesn't allow multiple host controllers of the same kind. This patch replaces it with a function that allows payloads to directly instantiate as many host controllers of whatever type they need. Change-Id: Ic21d2016a4ef92c67fa420bdc0f0d8a6508b69e5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169454 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit b6e95c39dd91f654f0a345f17b3196f56adf4891) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6644 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-08libpayload: reintroduce optional PCI in XHCI driverPatrick Georgi
being a good citizen on the box, libpayload tries to return to EHCI mode on shutdown, so a non-XHCI capable USB driver after it (eg. in the OS) finds something to work with. Change-Id: Id227d646e08a258b841c644263112f0815dd486c Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4547 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-25libpayload: Add USB support for non-PCI controllersStefan Reinauer
Restructure USB stack to not depend on PCI, and make PCI stub available on x86, but provide fixed BARs for ARM (Exynos 5) Change-Id: Iee7c8b134c22b661a9a515e24943470c9dbadd1f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/49970 Reviewed-on: http://review.coreboot.org/4175 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-13libpayload: usb: Add interval attribute to endpointsNico Huber
Read bInterval from endpoint descriptors and store it in our endpoint_t struct. The interval is encoded dependently on the device' speed and the endpoint's type. Therefore, it will be normalized to the binary logarithm of the number of microframes, i.e. t = 125us * 2^interval The interval attribute will be used in the xHCI driver. Change-Id: I65a8eda6145faf34666800789f0292e640a8141b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3449 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Redirect USB slave init through controller driverPatrick Georgi
xHCI requires special treatment of set_address since it determines the device number itself (instead of the driver, as with the other controllers). The controller also wants to validate a chosen device configuration and we need to setup additional structures for the device and the endpoints. Therefore, we add three functions to the hci_t structure, namely: set_address() finish_device_config() destroy_device() Current implementation for the Set Address request moved into generic_set_address() which is set_address() for the UHCI, OCHI and EHCI drivers. The latter two are only provided as hooks for the xHCI driver. The Set Configuration request is moved after endpoint enumeration. For all other controller drivers nothing changes, as there is no other device communication between the lines where the set_configuration() call moved. Change-Id: I6127627b9367ef573aa1a1525782bc1304ea350d Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3447 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Add enum for USB speedsNico Huber
These values are already used in this usb stack. Change-Id: If96f1dc2b67fbc13dfc4ae2d84e8f9945aa03163 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3448 Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-13libpayload: Add usb_generic_(create|remove) functions for unrecognized devicesGabe Black
It might be useful to provide a USB driver in the payload itself instead of in libpayload. For example there are multiple payloads being built and linked against the same libpayload, and they might not need or even want to have the same set of drivers installed. This change adds two new functions, usb_generic_create and usb_generic_remove, which behave like the usbdisk_create and usbdisk_remove functions which are defined for USB mass storage devices. If a USB device isn't recognized and claimed by one of the built in USB class drivers (currently hub, hid, and msc) and the create function is defined, then it will be called to give the payload a chance to use the device. Once it's removed, if usb_generic_remove is defined it will be called, effectively giving the payload notice. Built and booted depthcharge on Link. Built depthcharge for Daisy. Built a netbooting payload, called usb_poll() with those functions implemented, and verified that they were called and that the devices they were told about were reasonable and the same as what was reported by lsusb in the booted system. Change-Id: Ief7c0a513b60849fbf2986ef4ae5c9e7825fef16 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2666 Tested-by: build bot (Jenkins) Reviewed-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-23libpayload: Fix some missing-prototype warningsNico Huber
usb_controller_initialize() is not declared in any header file nor called from outside of usbinit.c, so make it static. set_configuration() looks like beeing non-static on purpose (like the other helpers around it in usb.c), so put a prototype into usb.h. Change-Id: I08d93b3769d8398bb43462d9afdfeec81fef93ec Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1894 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-14libpayload: Add init() function to hci_t and rework uhci_reset()Nico Huber
uhci_reset() differs in semantics compared to the other HCI's reset() implementations. uhci_reset() does some initialization work after a controller reset. So move the initialization part to a new function, uhci_reinit(), which get's exported through a new entry in hci_t: hci_t.init(). Warning: This breaks code that relies on the current, special, counterintuitive behaviour of uhci_reset(). If one wants a working host controller after calling hci_t.reset(), he should call hci_t.init() afterwards. Change-Id: Ia7ce80865d12d11157645ce251f77f349f8e3c34 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1851 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-14libpayload: Document USB host controller setup functionsNico Huber
The semantics of the controller functions, start(), stop(), reset() and shutdown(), are not self-explanatory which let to some confusion. At least the reset() functions of the different host controller drivers were implemented following different interpretations. Let's make the intended behaviour of these functions clear. The stated inconsistencies will be addressed in following commits. Change-Id: Id2e300f65c21039218b6ba3f87c0fcd4f0dda0a8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1848 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-07libpayload: Turn the "debug" #define into the usb_debug static inline function.Gabe Black
The "debug" macro used internally in the libpayload USB subsystem was very generically named and would leak into consumers of the library that included usb.h directly or indirectly. This change turns that #define from a macro into a static inline function to move away from the preprocessor, and also renames it to usb_debug so it's less likely to collide with something unrelated. Change-Id: I18717df111aa9671495f8a2a5bdb2c6311fa7acf Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/1738 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-08-23libpayload: add controller type in usbdev_hcAnton Kochkov
Add controller type (UHCI, OHCI, EHCI or XHCI) into usbdev_hc (hci_t) struct, so now we know which type selected controller have. It needed to access controller specific data, if access usb tree outside of libpayload (e.g. in payload intself) Change-Id: I7df947bbb56a50d0d792ccd4d3a6b021ee95e2ea Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1145 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: Detach unresponsive usb mass storage devicesNico Huber
This enables logical detachment of unresponsive usb devices (i.e. devices not responding to control transfers) in the usb mass storage driver. Without the detection of unresponsive devices we wait way too long for the device to become ready. Change-Id: I8b8cf327f49dde25afaca4d3066f16ea86b99d3d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1121 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Add support for split transactions in EHCINico Huber
With split transactions, the EHCI host controller can handle full- and low-speed devices on hubs in high-speed mode. This adds support for split transactions for control and bulk transfers. Change-Id: I30fa1ce25757f33b1e6ed34207949c9255f05d49 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1081 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-01libpayload: Add clear_feature() function to USB frameworkNico Huber
This function will be used by the USB hub driver. Change-Id: I4d1d2e94f4442cbb636ae989e8ffd543181c4357 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1079 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-04libpayload: Drop usb_fatal()Patrick Georgi
We have fatal(), which is just as good. Coccinelle script: @@ expression E; @@ -usb_fatal(E) +fatal(E) Change-Id: Iabecbcc7d068cc0f82687bf51d89c2626642cd86 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/395 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2011-11-03libpayload: Reduce verbosity in USB stackMathias Krause
The USB stack is pretty noisy. Reduce the output to a sane level. Change-Id: I250949e5cf74a8c6d43822b2e7487143b2ae1c65 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2010-06-07Avoid using the name "pid_t", which is used on unixoid systems.Patrick Georgi
Move controller specific data structures into private headers, to avoid conflicts between controller drivers. Factor out the USB PID ids, which are only exposed on UHCI. It's of not much use on the other controllers. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5616 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-25USB updates from our internal treeStefan Reinauer
- support MMC2 devices - make usb stack more solid - drop some unused functions - fix lowspeed/speed naming - add support for "quirks" - improve usbhid driver Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5299 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-07-31Catch various cases in libpayload where malloc() or memalign() return NULLStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4474 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-10-16- reduced memory requirements a lot (from >100kb/controller toPatrick Georgi
560bytes/controller) - no need for the client of libpayload to implement usbdisk_{create,remove}, just because USB was compiled in. - usb hub support compiles, and works for some trivial cases (no device detach, trivial power management) - usb keyboard support works in qemu, though there are reports that it doesn't work on real hardware yet. - usb keyboard is integrated in both libc-getchar() and curses, if CONFIG_USB_HID is enabled Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3662 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-09-11Move the USB header files to a common location for installJordan Crouse
purposes. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3574 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1