summaryrefslogtreecommitdiff
path: root/payloads
AgeCommit message (Collapse)Author
2019-08-27libpayload/usb: add USB 3.1 GEN2 supportEric Lai
USB 3.1 GEN2 report speed type 4, add into speed enum. BUG=b:139787920 BRANCH=N/A TEST=Build libpayload and depthcharge on sarien and boot with USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22libpayload: usbmsc: Factor out usb_msc_force_init() functionJulius Werner
We're planning to have a use case with a custom USB device that implements the USB mass storage protocol on its bulk endpoints, but does not have the normal MSC class/protocol interface descriptors and does not support class-specific control requests (Get Max LUN and Bulk-Only Reset). We'd like to identify/enumerate the device via usb_generic_create() in our payload but then reuse all the normal MSC driver code. In order to make that possible, this patch factors a new usb_msc_force_init() function out of usb_msc_init() which will initialize an MSC device without checking its descriptors. It also adds some "quirks" flags that allow devices registered this way to customize behavior of the MSC stack. Change-Id: I50392128409cb2a879954f234149a5e3b060a229 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-22libpayload: usbmsc: Skip zero-length packets at end of dataJulius Werner
Some broken USB mass storage devices send another zero-length packet at the end of the data part of a transfer if the amount of data was evenly divisible by the packet size (which is pretty much always the case for block reads). This packet will get interpreted as the CSW and screw up the MSC state machine. This patch works around this issue by retrying the CSW transfer when it was received as exactly 0 bytes. This is the same mitigation the Linux kernel uses and harmless for correctly behaving devices. Also tighten validation of the CSW a little, making sure we verify the length before we read any fields and checking the signature in addition to the tag. Change-Id: I24f183f27b2c4f0142ba6c4b35b490c5798d0d21 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34485 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22Add buffer_to/from_fifo32(_prefix) helpersJulius Werner
Many peripheral drivers across different SoCs regularly face the same task of piping a transfer buffer into (or reading it out of) a 32-bit FIFO register. Sometimes it's just one register, sometimes a whole array of registers. Sometimes you actually transfer 4 bytes per register read/write, sometimes only 2 (or even 1). Sometimes writes need to be prefixed with one or two command bytes which makes the actual payload buffer "misaligned" in relation to the FIFO and requires a bunch of tricky bit packing logic to get right. Most of the times transfer lengths are not guaranteed to be divisible by 4, which also requires a bunch of logic to treat the potential unaligned end of the transfer correctly. We have a dozen different implementations of this same pattern across coreboot. This patch introduces a new family of helper functions that aims to solve all these use cases once and for all (*fingers crossed*). Change-Id: Ia71f66c1cee530afa4c77c46a838b4de646ffcfb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-21payloads/tianocore: Enable UEFIPayloadLijian Zhao
corebootpayload package in upstream TianoCore was replaced with UEFIPayload, add external payload build option for UEFIPayload. BUG=N/A TEST=Select TianoCore payload as UEFIPayload, build and able to boot up on QEMU q35 after PCIE_BASE set. Change-Id: I0b7785fde9f4113b2cd91323ac0358b229c5a6e6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34459 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20Makefile.inc, payloads: Enable -WvlaJacob Garber
Variable length arrays are dangerous, so let's make sure they don't sneak back into coreboot or any of the payloads. Change-Id: Idf2488cf0efab51c9569a3789ae953368b61880c Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33846 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08arch/riscv: Enable FIT supportJonathan Neuschäfer
Tested on qemu-riscv. Depends on OpenSBI integration and proper memory detection in qemu. Boots into Linux until initrd should be loaded. Tested on SiFive/unleashed: Boots into Linux until earlycon terminates. Change-Id: I5ebc6cc2cc9e328f36d70fba13555386bb8c29d6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30292 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08libpayload: cbgfx: Allow rotation of the displayNicolas Boichat
Sometimes the display native orientation does not match the device default orientation, so allow rotation of the framebuffer before it is displayed on screen. set_pixel now take coordinates in the rotated coordinate system, and converts the coordinates before writing to the framebuffer. Also, screen.size now matches the rotated system (_not_ the framebuffer size). BUG=b:132049716 TEST=Boot krane, see that FW screen is orientation properly. Change-Id: If9316c0ce33c17057372ef5995a2c68de4f11f02 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2019-07-26libpayload/serial/qcs405: Mark uart console as suchPatrick Georgi
depthcharge prefers knowing where its input comes from BUG=b:137378326 BRANCH=none TEST=ctrl-d / enter to enter dev-mode works now. Change-Id: I74b5be18c3583be17c73950ced93fad883690090 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-25payloads/external/Yabits: Pass XGCCPATHNico Huber
Pass `XGCCPATH` instead of individual programs as that is what the Makefile expects. Change-Id: I3267ec5259e9d37b2f3b0b8c126d173fc8b5a3ca Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-23vboot: deprecate vboot_handoff structureJoel Kitching
vboot_handoff is no longer used in coreboot, and is not needed in CBMEM or cbtable. BUG=b:124141368, b:124192753 TEST=make clean && make runtests BRANCH=none Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23libpayload/libc: Use size_t for lengths and indicesJacob Garber
size_t is the natural integer type for strlen() and array indices, and this fixes several integer conversion and sign comparison warnings. Change-Id: I5658b19f990de4596a602b36d9533b1ca96ad947 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33794 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23libpayload/libc: Tidy utf16le_to_asciiJacob Garber
- Constify the string argument - Change int to size_t, which is what xmalloc expects Change-Id: I8b5a13319ded4025f883760f2b6d4d7a9ad9fb8b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-23libpayload/libc: Correct strlcat return valueJacob Garber
The documented return value for strlcat is horribly wrong, as is the return value itself. It should not return the number of appended bytes, but rather the length of the concatenated string. From the man page: The strlcpy() and strlcat() functions return the total length of the string they tried to create. For strlcpy() that means the length of src. For strlcat() that means the initial length of dst plus the length of src. While this may seem somewhat confusing, it was done to make truncation detection simple. This change is more likely to fix existing code than break it, since anyone who uses the return value of strlcat will almost certainly rely on the standard behaviour rather than investigate coreboot's source code to see that we have a quirky version. Change-Id: I4421305af85bce88d12d6fdc2eea6807ccdcf449 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-21libpayload: Enable -Wimplicit-fallthroughJacob Garber
Add comments to intentional fall throughs and enable the warning. Change-Id: I93e071c4fb139fa6e9cd8a1bfb5800f5f4eac50b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-19payloads/GRUB: Use correct script name in MakefileGompa
Fixes: 3555389a8c (payloads: Update GRUB stable from 2.02 to 2.04) Change-Id: I2f95059453ca5565a38550b147590ece4d8bf5ad Signed-off-by: Gompa <gompa@h-bomb.nl> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-13util/testing: Ensure coreboot-gerrit fails if libpayload build failsKeith Short
The JUnit output from the libpayload builds was getting deleted by the coreinfo build. Move the libpayload to later in the coreboot-gerrit job. Also add messages to stdout indicating the various libpayload configs that are built and a message indicating when all libpayload builds are complete. BUG=b:137380189 TEST=Upload test commit that includes a libpayload compile error and verify buildbot fails. Change-Id: I43b55f402216582dcf81be34171437be345572ab Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34183 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13payloads: Update GRUB stable from 2.02 to 2.04Paul Menzel
GRUB 2.04 was released on July 5th, 2019, so update. The only change-log is the git history. Some coreboot related changes are listed below. 1. coreboot: Changed cbmemc to support updated console format from coreboot. 2. ahci: Increase time-out from 10 s to 32 s 3. normal/menu: Do not treat error values as key presses When building from the git repository, `./bootstrap.sh` needs to be run to set up Gnulib. Ignore the exit code, as older versions might not have this script. Change-Id: Iab0b87164ed86f15d3415af935998b59e0d76c45 Signed-off-by: Pablo <42.pablo.ms@gmail.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-09libpayload/usb: fix DWC2 driverPatrick Georgi
A typo introduced in commit bf2c693f893ab6f9458f1a4840c2a9cbbd4bb9f2 made the driver not build: DWC_SLEEP_TIME_US instead of DWC2_SLEEP_TIME_US. Change-Id: I197b25fd4f568cce7a4bbcee8cc285b25b26afb1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Keith Short <keithshort@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-08payloads/external/Memtest86Plus: update to version 002 stableMartin Kepplinger
The memtest86plus project has been tagged as stable. Update the coreboot build accordingly. Change-Id: I078ac5d91e60a424efb5e14f39ae59e7ae9cbfe2 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-07payloads/coreinfo: Enable -Wmissing-prototypesJacob Garber
Change-Id: I7ee9436ba71ceea35a35272291ea245c0b7c37c5 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-07payloads/coreinfo: Make internal functions staticJacob Garber
These functions are only used in the files they are defined in, so they can be made static. Change-Id: Ic7f78912803cbdd1cb3a75f7f69f526739dab6e7 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-07payloads/coreinfo: Enable -WextraJacob Garber
This enables extra useful warnings. Change-Id: I3d54988935c7df9ac0dc2f7aceb56fb720c9c4d1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-07payloads/coreinfo: Use correct integer types for loop indicesJacob Garber
Make sure that the type of the loop index matches the type of the upper bound. This fixes several -Wsign-compare warnings. Change-Id: I73a88355d86288609e03f7a6fcaec14dfedac203 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-07payloads/coreinfo: Use fixed-width integers for cpuidJacob Garber
This function executes the cpuid instruction, which takes a 32 bit input value (idx), and then stores output in eax, ebx, ecx, and edx, which are all 32 bit registers. Update the prototype to use fixed-width integers, and update all usage calls appropriately. Change-Id: I15876fa35628d3a505864fb49be4fdab1fd19f4a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-02libpayload/usb: Increase USB request timeout to 5 sKeith Short
Increase the timeout for USB requests to 5 seconds for all USB host controllers. Prior to this fix, the xCHI driver was detecting false timeouts during SET ADDRESS requests when nested downstream hubs were connected to the xHCI root hub. BUG=b:124730179 BRANCH=sarien TEST=Build libpayload and depthcharge on sarien/arcada. TEST=Without change replicate USB set address timeouts in depthcharge when dock and 4K monitor connected (which includes a total of 4 USB hubs). With timeout fix, depthcharge boots OS with no USB errors and the same USB topology. Note that this tests xHCI operation only. Change-Id: I53e3e67d893420e7c9e8b52c47dd0edb979e5468 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-29libpayload: cbgfx: Run cbgfx_init() before we need it for draw_box()Julius Werner
calculate_color() uses the 'fbinfo' global that is initialized by cbgfx_init(), so we need to run the latter before we can run the former or we get a null pointer access. Change-Id: I73ca8e20ca36f64d699379d504fd41dc2084f157 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2019-06-28payloads/external/LinuxBoot: Update x86_64 defconfigPatrick Rudolph
* Add support for Linux 5.x ** Select PCI, which isn't the default anymore with 5.x ** Select google firmware driver, which wasn't build any more * Add support for Intel LPSS uart ** Select MFD and MFD_INTEL_LPSS_PCI ** Increase console count to 32 * Add support for coreboot framebuffer ** Select FB_SIMPLE * Add support for eMMC/SDHCI ** Select MMC_SDHCI_* * Add support for u-root's localboot ** Select KEXEC_FILE_LOAD ** Select FIRMWARE_MEMMAP Stats: * Kernel size 1.9MiB * U-root (core + systemboot) 4.6MiB Tested on Intel APL Up² board: * Fixes non working console on APL Up2 board and eMMC bootmedia shows up. * Allows to boot GNU/Linux from eMMC using 'localboot' Change-Id: Ib5bd33531741e588ac7d5ff6a02b0482f6655ddf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-06-27libpayload: Re-initialize UART RXPrudhvi Yarlagadda
UART RX needs to be re-initialized in libpayload as it is getting reset at the end of coreboot. Change-Id: I7820bd7afd2e5f81e21a43f330ed42d3a732d577 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-21payloads/libpayload: Update a Makefile for sample libpayloadAsami Doi
and make a configuraton for QEMU/ARM. This CL allows building a sample libpayload for QEMU/ARM. Change-Id: Ia32872c43a99357aa966de3582f6fdb2e2652517 Signed-off-by: Asami Doi <doiasami1219@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-06-18commonlib: define cbtable tags as enum to identify conflictsPatrick Georgi
We had a value that was overloaded thrice. By moving them in a common structure and ordering them by value such issues are hopefully avoided in the future. Also add a few values to libpayload that were only defined in commonlib. Change-Id: I227d078eebee2d92488454707d4dab8ecc24a4d8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32958 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-18libpayload: define cbtable tags as enum to identify conflictsPatrick Georgi
We had a value that was overloaded thrice. By moving them in a common structure and ordering them by value such issues are hopefully avoided in the future. Change-Id: I0c7762601d7620413989b458fa634d7606accc9d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32957 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-14libpayload/i8042/keyboard: Log errors during initializationFurquan Shaikh
Add error messages for all failed commands in keyboard_init(). Change-Id: Ie42ccbc4d850912c83e00376b27f192d5b652057 Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13libpayload: Add USB support to mistral configPatrick Georgi
Change-Id: I2ef42f7d607eec6166d762ad71c0d9540906589d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: SANTHOSH JANARDHANA HASSAN <sahassan@google.com>
2019-06-06Revert "libpayload: Reset PS/2 keyboard"Nico Huber
Documentation is scarce on the matter, however the related coreboot code suggests that after the ACK, the keyboard also sends the result of the self test (passed/failed). It looks like this result is never consumed here, probably resulting in further confusion for later com- mands. Let's revert this for now (if it's not too late for the 4.10 release) and break things later again. IMHO, due to the fact that there are dozens of different keyboard controller and keyboard implementations and no accurate specification followed, such changes should be tested on a lot of hardware before merge. This reverts commit a99ed13e3397bc536012120aab8cadb827913863. This reverts commit 7ae606f57f0b3d450ae748141b0e2367041b27d3. Change-Id: I4d4304d5d8a01e013feac61016c59bcaeea81140 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-04libpayload: Add UART for qcs405Prudhvi Yarlagadda
TEST=build Change-Id: I43164cf9eacc844af1d048f7b6ebbda96fc9d202 Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-04libpayload/i8042/keyboard: Fix return value check for keyboard_cmdFurquan Shaikh
CB:32951 ("libpayload: Reset PS/2 keyboard") added a call to reset keyboard and check the return value of keyboard_cmd() to compare against I8042_KBCMD_ACK. However, keyboard_cmd() already checks for ACK and returns 1 or 0 based on whether ACK is received. This change fixes the check introduced by CB:32951 to compare against 0 just like the other checks for keyboard_cmd(). Additionally, it adds error messages for all failed commands in keyboard_init() to make the prints consistent in case of failure. BUG=b:134366527 TEST=Verified that logs do not contain "ERROR: Keyboard reset failed" anymore. Change-Id: Idcadaae12e0a44e404a1d98c6deb633d97058203 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-29libpayload/drivers/i8402/kbd: Fix qemuPatrick Rudolph
Reset keyboard controller to fix qemu make scan codes. Change-Id: I5f8ad2d4be4b9e89d9af3a62726259e77f0403c1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/23584 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-29payloads/external/Linuxboot: Fix Makefile when not using bashChristian Walter
Adding "SHELL := /bin/bash" to the Makefile makes sure, that we use the bash shell which is needed here. Tested with oh-my-zsh. Change-Id: I71495e15b8f1a495af7d8ab21cc5235feb595e01 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33014 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-29payloads/external/iPXE: Add more Kconfig optionsPatrick Rudolph
Add two new options: * Disable the prompt "Press Ctrl+B for the iPXE command line..." Add a boolean that disables the initial 2 second timeout. * Include a script that is executed instead of showing a shell. Allows to add a script that will be included into the iPXE ROM. Tested on Lenovo T500 and PC Engines apu2. Change-Id: Ie1083d8571d9d1f1c7c71659fb6ff0de2eecad0e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/20782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-27libpayload: Reset PS/2 keyboardPaul Menzel
Loading a libpayload based payload like coreinfo or FILO from SeaBIOS or GRUB pressing keys does not give the expected results. For example, pressing F1 gives the character 24 translated to scan code 6a. ESC for example 43 (111) in coreinfo loaded from SeaBIOS on QEMU Q35. The problem is not reproducible using the payload directly, that means without SeaBIOS or GRUB. The problem seems to be, that those have already initialized the PS/2 controller and AT keyboard. Comparing it with coreboot’s PS/2 keyboard code, the keyboard needs to be reset. That seems to fix the issue, when the keyboard was initialized before. TEST=Build coreboot for QEMU Q35 with SeaBIOS, and coreinfo as secondary payload. Run qemu-system-i386 -M q35 -L /dev/shm -bios build/coreboot.rom -serial stdio press 3 to select the coreinfo payload, and verify that the keys F1 and F2 are working. Same with coreinfo loaded from GRUB on the ASRock E350M1. Change-Id: I2732292ac316d4bc0029ecb5c95fa7d1e7d68947 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-23Renumber cbtable tag MMC_INFOPatrick Georgi
We got another tag in the meantime, so resolve the conflict. Change-Id: I64cb5e02a9bed3d8746b75e451c13a1598341ba1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32954 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23coreboot_tables: pass the early_mmc_wake_hw status to payloadBora Guvendik
Pass the return value from early_mmc_wake_hw() to the payload so that payload can skip sending CMD0 and resetting the card in case of success or in case of a failure in firmware, payload can recover by sending CMD0 and resetting the card. BUG=b:78106689 TEST=Boot to OS Change-Id: Ia4c57d05433c3966118c3642913d7017958cce55 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25464 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16libpayload: make log2 and clz work on signed values internallyPatrick Georgi
Needed to make libpayload build clean with -Wconversion. BUG=b:111443775 BRANCH=none TEST=make junit.xml shows fewer warnings with -Wconversion enabled Change-Id: Ie193e39854d2231b6d09a2b0deeeef2873e900ab Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-05-15payloads/coreinfo: Remove unused variableJacob Garber
The 'last' variable is unused, and has been for the entire history of this file. Found-by: Clang Static Analyzer Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: Ic86a6d8d2b47585f901f1e48ae88735534c834ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/32796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com>
2019-05-15libpayload: ahci: Prevent memory leaks when failing on initJacob Garber
Free several resources when AHCI initialization fails. Note that it is only safe to free resources when the command engine has stopped, since otherwise they may still be used for DMA. Found-by: Coverity CID 1260719, 1260727, 1261090, 1261098 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I6826d79338b26ff9696ab6ac9eb4c59f734687d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-13libpayload/drivers/i8042: Add fallthrough commentJacob Garber
Ctrl-delete does nothing, so it falls through to the default case. Add a comment to make this explicit. Found-by: Coverity Scan #1260878 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I4a6f51cb04696b6ebcb554c5667a5bbea58622c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-13libpayload: classify all keyboardsMatt Delco
Depthcharge uses the keyboard type to help determine whether it can trust the keyboard for security-sensitive confirmations. Currently it trusts anything except usb, but now there's a need to distrust ec-based ps/2 keyboards that are associated with untrusted ECs. To help facilitate this, coreboot needs to report more details about non-usb keyboards, so this change replaces the current instances of unknown with enum values that distinguish uart and gpio from ec-based keyboards. BUG=b:129471321 BRANCH=None TEST=Local compile and flash to systems with trusted and non-trusted ECs. Confirmed that security confirmation can't be performed via keyboard on a system with an untrusted EC but can still be performed on a system with a trusted EC. Change-Id: Iee6295dafadf7cb3da98b62f43b0e184b2b69b1e Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-24payloads/seabios: Update the stable git hash of 1.12.1Martin Kepplinger
The Kconfig file has been updated to show 1.12.1 but this is only what gets displayed for the "stable" option. Fix this by updating the actual git hash for the SeaBIOS 1.12.1 release tag. Fixes: fb83ff1a8b ("Update stable from 1.12.0 to 1.12.1") Change-Id: I76dc0dc8b651df0c6ff6f3c02819a70bab8c04cd Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-23linuxboot/Kconfig: Remove symbol name of a `choice`Nico Huber
Kconfig somehow adds spurious booleans for each alternative when the choice itself has a name. That's fixed simply by removing the name. Change-Id: Ic35f0697f1f7bb92c12414c17a8790464b376012 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 23:45:18 +0000