summaryrefslogtreecommitdiff
path: root/payloads
AgeCommit message (Collapse)Author
2013-06-04libpayload: Whitelist Mobile Panther Point AHCI controllerNico Huber
Add the Mobile Panther Point (PPT) AHCI controller (DEVID 0x1e03) to the list of tested controllers. Also comment the only other listed controller (Mobile ICH9). The PPT AHCI controller was tested with a QM77 chipset on a Kontron KTQM77 board. Change-Id: Ia396761411f4f9289af11ec8e1b144512b2fc126 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3361 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-04fix tinycursesPatrick Georgi
Change-Id: I9e7bde7b2c90b8b34c6aa8e90a16cd29dc108fe9 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3360 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-15libpayload: Fix the logic for hardware-less serial consolesDave Frodin
This fixes the configuration where serial console output is being sent to non-existant hardware to be captured with I/O trapping. In this configuration where there isn't serial hardware present we still want to init the consoles. We just never want to read non-existant hardware. Change-Id: Ic51dc574b9c0df3f6ed071086b0fb2119afedc44 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3249 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08cbfs_core.c: make cfbs searches even less verboseDave Frodin
The cbfs core code would print out the name of the file it is searching for and when it is found would print out the name again. This contributes to a lot of unnecessary messages in a functioning payload’s output. Change this message to a DEBUG one so that it will only be printed when CONFIG_DEBUG_CBFS is enabled. Change-Id: Ib238ff174bedba8eaaad8d1d452721fcac339b1a Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3208 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-06libpayload: make searching for a file less verboseAaron Durbin
The cbfs core code would print out all unmatched file names when searching for a file. This contributes to a lot of unnecessary messages in the boot log. Change this message to a DEBUG one so that it will only be printed when CONFIG_DEBUG_CBFS is enabled. Change-Id: I34c747e0d3406351318abf70994dbc0bb3fa6c01 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3164 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2013-04-20Eliminate use of pointers in coreboot tableStefan Reinauer
Because pointers can be 32bit or 64bit big, using them in the coreboot table requires the OS and the firmware to operate in the same mode which is not always the case. Hence, use 64bit for all pointers stored in the coreboot table. Guess we'll have to fix this up once we port to the first 128bit machines. Change-Id: I46fc1dad530e5230986f7aa5740595428ede4f93 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3115 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-04-18libpayload: Don't sneak in compiler includesStefan Reinauer
The way we got to include the compiler includes was kind of whacky. Instead of mixing in potentially problematic headers, make libpayload self-contained by adding some missing header files. Also clean up conflicting definitions of size_t throughout the tree. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I0ad1194de1a00b7133c5477c00eb167d63a2ee85 Reviewed-on: https://gerrit.chromium.org/gerrit/47608 Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3058 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-11libpayload: storage.c: Fix typo in st*orage in commentPaul Menzel
Reading commit »libpayload: New AHCI, ATA and ATAPI drivers« (1f6bd94f) [1], the spelling error was found and is now fixed. [1] http://review.coreboot.org/1622 Change-Id: Id418bcb99c1a9a400a49fc04078e465bd0908074 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3071 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08libpayload: Handle multifunction bridge devices better.Gabe Black
This change modifies the code in libpayload that scans the PCI hierarchy for USB controllers. Previously, if a devices primary function (function 0) was a bridge, then none of the other functions, if any, would be looked at. If one of the other functions was a bridge, that wouldn't be handled either. The new version looks at each function that's present no matter what, and if it discovers that it's a bridge it scans the other side. Change-Id: I37f269a4fe505fd32d9594e2daf17ddd78609c15 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2517 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-04-04libpayload, superiotool: README: Prepend `coreboot/` to path of change ↵Paul Menzel
directory line Nico Huber spotted [1], that commit (4d6ab4e2) [1] updating superiotools’s `README` with the Git command line superiotool: Update README with Git repository URL and directory location missed, that after `git clone` one sitll has to change into the cloned directory. So prepend the path with `coreboot/` to fix that. The same error happened in the commit (e1ea5151) for libpayload [2] libpayload: Update README with Git repository URL and directory location and is fixed in this patch too. [1] http://review.coreboot.org/#/c/3019/ [2] http://review.coreboot.org/2228 Change-Id: Ib6e8b678af6276556a40ccfd52ae35ca7e674455 Reported-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3021 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-04-02libpayload: cbfs_core.h: Add missing third person s in »it need*s*«Paul Menzel
Introduced in »libpayload: New CBFS to support multiple firmware media sources.« (d01d0368) [1]. [1] http://review.coreboot.org/2191 Change-Id: I9feb9ab49825744cd00d6392a526f7af0ed053d1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2997 Reviewed-by: Nico Huber <nico.huber@secunet.com> Tested-by: build bot (Jenkins)
2013-04-01PDCurses: pdcscrn.c: Use `#ifdef` instead of `#if CONFIG_SPEAKER`Paul Menzel
Building libpayload with the PDCurses backend the following warning is shown. /src/coreboot/payloads/libpayload(master) $ make clean /src/coreboot/payloads/libpayload(master) $ make […] CC curses/pdcurses-backend/pdcscrn.libcurses.o curses/pdcurses-backend/pdcscrn.c: In function 'PDC_scr_open': curses/pdcurses-backend/pdcscrn.c:75:5: warning: "CONFIG_SPEAKER" is not defined [-Wundef] […] The GCC documentation states [1] In some contexts this shortcut is undesirable. The -Wundef option causes GCC to warn whenever it encounters an identifier which is not a macro in an ‘#if’. and therefore use `#ifdef` [2] to silence this warning. No functional change is done, as `CONFIG_SPEAKER` is assigned the value `Y` when defined. There was some discussion going on the list [3], but my points in there turned out to be incorrect. [1] http://gcc.gnu.org/onlinedocs/cpp/If.html [2] http://gcc.gnu.org/onlinedocs/cpp/Ifdef.html [3] http://www.coreboot.org/pipermail/coreboot/2013-March/075561.html Change-Id: I8e9c9b5d01985b21ad05018986d614cf9bf2b439 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2934 Reviewed-by: Nico Huber <nico.huber@secunet.com> Tested-by: build bot (Jenkins)
2013-03-30armv7: import updated cache/MMU stuff from corebootDavid Hendricks
This imports the newest cache and MMU code from coreboot. This time it's so new that it hasn't even been checked in to coreboot. However, this version at least allows DMA to work properly for the MSHC driver. So even if we rebase a few more times, this version is at least a step in the right direction. Note: This omits the stuff that sets up dcache policy since libpayload should not need to worry about that and it depends on cbmem stuff. Change-Id: Idd42b083e8019634aaaa44d5bf5b51db6c3912f5 Signed-off-by: David Hendricks <dhendrix@google.com> Reviewed-on: http://review.coreboot.org/2975 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-03-30armv7: import new cache maintenance API from corebootDavid Hendricks
This imports the new cache maintenance API from coreboot at commit bba8090. This is a BSD-licensed implementation which exposes cache maintenance opertaions necessary for payloads for things such as DMA transfers. Change-Id: I554676db89517bebc6edae4f7ab7e5882e6f986d Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2974 Tested-by: build bot (Jenkins)
2013-03-29libpayload: add x86 ROM variable MTRR supportAaron Durbin
On x86, coreboot may allocate a variable range MTRR for enabling caching of the system ROM. Add the ability to parse this structure and add the result to the sysinfo structure. An example usage implementation would be to obtain the variable MTRR index that covers the ROM from the sysinfo structure. Then one would disable caching and change the MTRR type from uncacheable to write-protect and enable caching. The opposite sequence is required to tearn down the caching. Change-Id: I3bfe2028d8574d3adb1d85292abf8f1372cf97fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2920 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-26libpayload: Fix prototype warnings in PDCursesStefan Reinauer
This fixes the following PDCurses warnings: CC curses/pdcurses-backend/pdcsetsc.libcurses.o curses/pdcurses-backend/pdcsetsc.c: In function 'PDC_curs_set': curses/pdcurses-backend/pdcsetsc.c:17:9: warning: implicit declaration of function 'serial_cursor_enable' [-Wimplicit-function-declaration] curses/pdcurses-backend/pdcsetsc.c:22:9: warning: implicit declaration of function 'video_console_cursor_enable' [-Wimplicit-function-declaration] CC curses/pdcurses-backend/pdcutil.libcurses.o curses/pdcurses-backend/pdcutil.c:30:6: warning: no previous prototype for 'curses_enable_serial' [-Wmissing-prototypes] curses/pdcurses-backend/pdcutil.c:35:6: warning: no previous prototype for 'curses_enable_vga' [-Wmissing-prototypes] curses/pdcurses-backend/pdcutil.c:40:5: warning: function declaration isn't a prototype [-Wstrict-prototypes] curses/pdcurses-backend/pdcutil.c:45:5: warning: function declaration isn't a prototype [-Wstrict-prototypes] Change-Id: If0d4d475d3006f1a77f67ec46c6bdf4ee2906981 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2908 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-26libpayload: Fix type issuesStefan Reinauer
There were a number of type issues in libpayload that sneaked in with 903f8e0. - size_t and ssize_t were conflicting with gcc builtins - some stdint types were used in libpayload but not defined in our stdint.h With this patch it's possible to compile libpayload with the reference toolchain again. Change-Id: Idd5ccfdd9f3536b36bceca2d101e7405883b10bc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2903 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-26libpayload: fix size_t handlingStefan Reinauer
libcbfs was using printf for size_t typed variables. However, printf did not support printing those. This patch fixes the issue, removing the warning when compiling ram_media.c libcbfs/ram_media.c:52:10: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'long unsigned int' [-Wformat] libcbfs/ram_media.c:52:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int' [-Wformat] Change-Id: Iaf6e723f9a5b0a61a39d3125036fee9853e37ba8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2904 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-26libpayload: Fix const warnings in keyname() and termname()Stefan Reinauer
The keyname() and termname() functions were creating a whole lot of warnings of the style curses/PDCurses-3.4/pdcurses/keyname.c:41:9: warning: initialization discards 'const' qualifier from pointer target type [enabled by default] This patch fixes them. Change-Id: Iae3c4e5201b48c2d2033cac48577e0462a34f309 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2905 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-26libpayload: Fix variable shadowing in PDCursesStefan Reinauer
PDCurses has a function called overlay() and also uses overlay as a variable name in some functions. This patch fixes the ambiguity that caused warnings like curses/PDCurses-3.4/pdcurses/overlay.c: In function '_copy_win': curses/PDCurses-3.4/pdcurses/overlay.c:51:39: warning: declaration of 'overlay' shadows a global declaration [-Wshadow] In file included from curses/PDCurses-3.4/curspriv.h:16:0, from curses/PDCurses-3.4/pdcurses/overlay.c:3: curses/PDCurses-3.4/curses.h:1014:9: warning: shadowed declaration is here [-Wshadow] Change-Id: I907653df0c8bb32c98bdcbc6476e94d2da6e0e90 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2906 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-26libpayload: Fix missing prototype warning for Xinitscr()Stefan Reinauer
Xinitscr is only used internally in PDCurses, unless XCURSES is defined. This patch fixes a warning that is produced because of that. Change-Id: I211f75717276cf028e0b435f328d1687d3536eb7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2907 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-26libpayload: Fix unused function warning in EHCI stackStefan Reinauer
The function dump_qh() was added a while back but never used. Hide it behind USB_DEBUG so it doesn't cause warnings when not debugging the USB stack. Change-Id: Idb3c7bb214895ef82676d181836a578bf161e8e0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2909 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-25libpayload: Fix Config.in warningStefan Reinauer
PDcurses is already default. Hence drop the additional attempt that is not supported by Kconfig. Config.in:123:warning: defaults for choice values not supported Change-Id: I12cb5ea0bef2f146cf237c7a3cc9293a600d736b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2902 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-25libpayload: fix use-after-free in usb_exit()Mathias Krause
The controller's shutdown function free()s the controller structure so we shouldn't access it any more after calling shutdown. As all controllers detach themself, i.e. unchain themself from usb_hcs, just keep iterating over usb_hcs until it's NULL. Change-Id: Ie85caba0f685494c3fe04c550a5a14bc4158a94e Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: http://review.coreboot.org/2900 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-03-25libpayload: EHCI - detach controller in ehci_shutdown()Mathias Krause
It shouldn't be used any more as we're about to free() the memory behind the controller -- therefore detach it. Change-Id: I875322a9940570c51d412a7f3bfb6af4ea3b3764 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: http://review.coreboot.org/2899 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.huber@secunet.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-22libpayload: Add comments on virtual pointers in lib_sysinfoNico Huber
After another incident related to virtual pointers in lib_sysinfo (and resulting confusion), I decided to put some comments on the matter into the code. Remember, we decided to always use virtual pointers in lib_sysinfo, but it's not always obvious from the code, that they are. See also: 425973c libpayload: Always use virtual pointers in struct sysinfo_t 593f577 libpayload: Fix use of virtual pointers in sysinfo Change-Id: I886c3b1d182cba07f1aab1667e702e2868ad4b68 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/2878 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-22libpayload: initial test case + tiny "framework"Patrick Georgi
This adds a test case for using CBFS images that reside in RAM and a Makefile to run it (and maybe other tests in the future). The test concerns an issue in libcbfs when using x86 style CBFS images in non-canonical locations (eg. when loading CBFS images for processing). Use with "make run" inside the tests directory. Change-Id: I1af3792a1451728ff9594ba7f0410027cdecb59d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2623 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-21cbfs: Change false ERROR print to a WARNING.Shawn Nematbakhsh
Change "ERROR" to "WARNING" -- not finding the indicated file is usually not a fatal error. Change-Id: I0600964360ee27484c393125823e833f29aaa7e7 Signed-off-by: Shawn Nematbakhsh <shawnn@google.com> Reviewed-on: http://review.coreboot.org/2833 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18libpayload: Fix the config file dependency in the Makefile templateGabe Black
The template had a dependency on config.h which was correct for coreboot, where this build system originally came from, but not for libpayload which uses the differently named libpayload-config.h, presumably to avoid colliding with a config.h used by the actual payload. Because libpayload-config.h is now effectively a dependency of everything, it doesn't have to be added piecemeal in Makefile.inc. Change-Id: I01f20d363cb1393fa1cdcf0dc916670db90294e9 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2763 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18libpayload: Make keycode constants available outside of curses.h.Gabe Black
And include the new, split out version in drivers/keyboard.c and drivers/usb/usbhid.c. Those files were including curses.h just for those definitions, but the include path was only fixed up to to point to the libpayload versions of those files if one of the variants of curses was compiled in. If neither was, gcc would fall back to the system version of that header which is wrong. Change-Id: I8c2ee0baf5f0702bd8c713c8dd4613a4bb269ce5 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2762 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14libpayload: add support for vboot_handoffAaron Durbin
The vboot_handoff structure needs to be parsed from the coreboot tables. Add a placeholder in sysinfo as well as the ability to parse the coreboot table entry concering the vboot_handoff structure. Built with unified boot loader and ebuild changes. Can find and use the VbInitParams for doing kernel selection. Change-Id: If40a863b4a445fa5f7814325add03355fd0ac647 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2720 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14libpayload: Turn the endian conversion macros into functions.Gabe Black
In their current macro form, any arguments that are expressions will be evaluated multiple times. That can cause problems if they have side effects, and might not even compile if the overall expression is ambiguous, for instance if you pass in foo++. Built with code that previously wouldn't compile because the macros expanded to ambiguous expressions. Change-Id: I378c04d7aff5b4ad40581930ce90e49ba7df1d3e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14libpayload: Generalize and redistribute timekeeping codeGabe Black
The timekeeping code in libpayload was dependent on rdtsc, and when it was split up by arch, that code was duplicated even though it was mostly the same. This change factors out actually reading the count from the timer and the speed of the timer and puts the definitions of ndelay, udelay, mdelay and delay into generic code. Then, in x86, the timer_hz and timer_get_raw_value functions which used to be in depthcharge were moved over to libpayload's arch/x86/timer.c. In ARM where there isn't a single, canonical timer, those functions are omitted with the intention that they'll be implemented by a specific timer driver chosen elsewhere. Change-Id: I9c919bed712ace941f417c1d58679d667b2d8269 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2717 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14libpayload: Put dump_td/dump_ed in ohci.c behind #ifdef USB_DEBUGGabe Black
This function is static and not used in that file. To avoid the compiler complaining about that fact, put the two functions and the call to dump_ed (currently #if 0) behind #ifdef USB_DEBUG Change-Id: Ic373313b5fff81f09800f286b32238350ab699c6 Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2716 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14libpayload: Don't declare the loop counter within the for loopGabe Black
'for' loop initial declarations are only allowed in C99 mode I didn't realize we don't enable 14 year old features when building libpayload, and I must have accidentally not rebuilt everything when making my final tweaks to my earlier change. Change-Id: I6caeeffad177b6d61fa30175f767e85084c061f4 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2718 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-03-13libpayload: Don't do unaligned accesses during LZMA decompressionGabe Black
Use memcpy to access a uint32_t that's inherently unaligned due to the layout of the LZMA header format. Built and booted on Daisy and saw a data abort go away. Built and booted into developer mode on Link and verified that bitmaps were decompressed/displayed correctly. Change-Id: Id3ae746c04d23bcb0345cb71797bfa219479cc8f Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2670 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Add size_t and ssize_t types for ARM and x86Gabe Black
Some new TPM drivers in depthcharge require that type. I added it to arch/types.h which seemed appropriate, but I'm not sure that's exactly the right header to use, or in other words if you'd get that type from libpayload the same way you'd get it if you were building a standard Linux program. Also, I attempted to determine what underlying types gcc would use, and while I think I picked the right ones I'm not 100% certain of that either. Change-Id: Ic5c0b4173c8565ede3bfce8870976d596d69e51d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2669 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Move over to the payload's stack during startupGabe Black
Don't keep using the coreboot stack on ARMv7. Change-Id: I734c5d77f8584e30ee0c720d41e21e3040f56db4 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2668 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: ARCH-$(CONFIG_ARCH_ARMV7) was defined twice, make one POWERPCGabe Black
Change-Id: Ia85a7cd6a0b85119cce6b2f9c42a7fc31ffd9f97 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2654 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Add usb_generic_(create|remove) functions for unrecognized devicesGabe Black
It might be useful to provide a USB driver in the payload itself instead of in libpayload. For example there are multiple payloads being built and linked against the same libpayload, and they might not need or even want to have the same set of drivers installed. This change adds two new functions, usb_generic_create and usb_generic_remove, which behave like the usbdisk_create and usbdisk_remove functions which are defined for USB mass storage devices. If a USB device isn't recognized and claimed by one of the built in USB class drivers (currently hub, hid, and msc) and the create function is defined, then it will be called to give the payload a chance to use the device. Once it's removed, if usb_generic_remove is defined it will be called, effectively giving the payload notice. Built and booted depthcharge on Link. Built depthcharge for Daisy. Built a netbooting payload, called usb_poll() with those functions implemented, and verified that they were called and that the devices they were told about were reasonable and the same as what was reported by lsusb in the booted system. Change-Id: Ief7c0a513b60849fbf2986ef4ae5c9e7825fef16 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2666 Tested-by: build bot (Jenkins) Reviewed-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Split EHCI bulk transfers on packet boundaries over qTDsJulius Werner
EHCI controllers see transfers as a queue of transfer descriptors (qTDs), each of which can represent an aligned area of up to 20KB. Each qTD is processed separately, which means that a single USB packet cannot span multiple qTDs. While this should not be a problem according to the specification, some USB storage devices seem to get confused when a packet in the middle of a transfer is smaller than the maximum packet size (512 bytes) due to falling on a qTD boundary. This patch aligns the total transfer length per qTD to 512 bytes to avoid that problem (any excess bytes will simply roll over to the next qTD). Change-Id: I0b5db07507699a3861b30c1a5ee774c45dda7fdd Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/2651 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: add support for 64-bit EHCI controllersVincent Palatin
Initialize the high part of the address and use 64-bit compatible descriptors. (waste a few bytes on 32-bit but should be harmless) Read USB stick on a SandyBridge system which has 64-bit EHCI. Change-Id: I59cc842459acecdde8f8bdd4795ebfeccb842c8f Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2650 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Stub out time keeping functions for ARM as wellGabe Black
These were currently stubbed out for PowerPC but not for ARM. Change-Id: I08f45174877bf5751d972078b8c53d82898b7f2b Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2655 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: If no video drivers initialize in video_init, return 1.Gabe Black
Change-Id: I56f810dfa6654ac1e9d1696ad15e7f1b8bfe59bd Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2652 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-13libpayload: If there's no IO address space, don't try to use it for serialGabe Black
Change-Id: I01b1fa42139af925716cd5d57f96dc24da6df5a7 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2660 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: If there's no IO space, complain if the serial claims to use itGabe Black
Change-Id: I36c750d520ff034c9ca9b9af46bd99bd49af7355 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2659 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Consolidate io vs. mem mapped serial into accessor functionsGabe Black
This way we won't have two copies of the hardware init function, and three copies of the putchar, havechar, and getchar functions. Change-Id: Ifda7fec5d582244b0e163ee93ffeedeb28ce48da Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2657 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Make whether or not there's an IO address space configurableGabe Black
Default it to no to be consistent with the other architecture wide options (endianness), and turn it on explicitly for x86 and PowerPC. Change-Id: Idda26d580156bbbf08ea11b28abe75cfa6b594b2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2658 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-13libpayload: Start using only internal and compiler headers.Ronald G. Minnich
When building other payloads with lpgcc the -nostdinc flag was injected into CFLAGS, but when building libpayload itself some headers were being used from the host system. This change puts -nostdinc into the Makefile and xcompile script, fixes up one include path in include/inttypes.h, adds the compiler provided include directory to the include search path, and deletes the two now redundant stdint.h files. BUG=None TEST=With this and other changes, built libpayload and depthcharge for Daisy, Link, and Fox. BRANCH=None Change-Id: Ia7817fceab5297cd82ccc0d392330de0df61980e Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2710 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-13libpayload: Add more parenthesis to the endian conversion macrosGabe Black
There weren't enough parenthesis in the macros so operations might only apply to the last part of an expression passed in as an argument. Change-Id: I5afb406f9409986e45bbbc598bcbd0dd8507ed35 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/2665 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>