summaryrefslogtreecommitdiff
path: root/payloads
AgeCommit message (Collapse)Author
2012-07-27libpayload: Fix typoPatrick Georgi
Change-Id: I8708703e497053aa1251f06402bd8ea59bd9d24e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1370 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-12libpayload: Add reset function for OHCI USB driverAnton Kochkov
Implemented OHCI reset function ohci_reset() in ohci.c for libpayload's USB driver. Change-Id: Id6518cbe00a21202757b34926bad171909740e97 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1177 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-06-29libpayload: OHCI driver correct PCI BAR readingAnton Kochkov
Correct registers base (PCI BAR) reading to be more specification friendly. Registers base only in [31-12] bits, all other proposed to be 0 but that not true for some motherboards. So adding mask to use only valid bits. Change-Id: I2e9a4997e016dab812ccfe654e966bc91d42a625 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1143 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-29libpayload: use correct types in UHCI driverAnton Kochkov
As we using 16-bit reading and writing in UHCI drive, so all variables related to that must be 16-bit too. Change-Id: Ib1abb03d054c167512e21f24f3c3da688c7fd01f Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1144 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-22libpayload: Adjust timeouts and delays in OHCI driverNico Huber
This sets the timeout for control and bulk transfers to 2s per transfer descriptor (like we set it in the EHCI driver). It also adds delays around the disabling of control and bulk list access to overcome some race conditions. Change-Id: Ia2d1db890fca51c7d9477de163d55030e0c5a04a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1127 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-22libpayload: Add check for failure in usb_attach_device()Nico Huber
This adds a simple check if a device is really configured before returning it's address to the usb hub driver who wants to attach it. Change-Id: I6fea140217c3e7468cc48ef7c3cbf2be8d11f47a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1131 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-22libpayload: Shutdown reasonably if we can't init usb msc deviceNico Huber
This lets the init of usb mass storage return if the device configuration is unusable. Also add some checks for proper shutdown so we don't free/remove an uninitialized device. Change-Id: I6daf9b38e632b6e381bcd5a7717f0f1a3150b64a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1130 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: Add support for interrupt transfers in OHCINico Huber
This adds support for usb interrupt transfers to the OHCI driver. Basically this enables support for HID keyboard devices. For each interrupt transfer endpoint, two queues of transfer descriptors (TDs) are maintained: the first with initialized TDs is linked to the periodic schedule of the host controller (HC), the second holds processed TDs which will be polled by the usb class driver. The HC moves processed TDs from its schedule to a done queue. We periodically fetch all TDs from the done queue, to put them on the queue associated with the endpoint, where they can be polled from. Fully processed TDs (i.e. which have gone throuch all of this) will be reinitialized and put on the first queue again. Change-Id: Iaab72c04087b36c9f0f6e539e31b47060c190015 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1128 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Fix initialization of OHCI driverNico Huber
This fixes some memory corruption, leaking and padding issues within the initialization of the OHCI driver. Change-Id: If6891f2a53e339d32c4324f4c9e0b1ed07596a60 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1126 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Implement correct done queue processing for OHCINico Huber
This adds correct processing of the done queue of the OHCI host controller (HC). We will always process the done queue after a control or bulk transfer. Unfortunately, it's hard to tell when the HC will write out the done queue, so we have do free the transfer descriptors later and have to allocate them one by one. To distinguish different types of TDs (e.g. async vs. interrupt transfers) on the done queue, they are flagged in the lsb of there .config field. We can utilize this bit for our own purpose, as it's reserved and the host controller won't interpret it and preserves its state. Change-Id: I3b2271ae6221cdd50fc0f94582afdfe52bf7e797 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1125 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Correct interchanged parameters in OHCI driverNico Huber
In ohci_private.h some invocations of a MASK macro were called with its parameters interchanged. This fixes it with the hope not to break anything nasty. Change-Id: I56cb483b208442b497dbd32ce993cc53d1fba1e5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1122 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: Detach unresponsive usb mass storage devicesNico Huber
This enables logical detachment of unresponsive usb devices (i.e. devices not responding to control transfers) in the usb mass storage driver. Without the detection of unresponsive devices we wait way too long for the device to become ready. Change-Id: I8b8cf327f49dde25afaca4d3066f16ea86b99d3d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1121 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: Add dummy queue heads to EHCI interrupt frame listNico Huber
This introduces a dummy queue head in the interrupt frame list of the EHCI host controller. It's a workaround for broken controllers which follow pointers from this list even if the terminate bit is set. Fortunately, they do honor the bit in queue heads and having an empty QH in the list doesn't violate the standard. The linux kernel has a similar workaround for AMD SB700, SB800, and Hudson-2/3 platforms. We observed this bug with an AMD SB600. Change-Id: Ibbb66dea5fddc89c7995a24d746bedf6bfa887be Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1124 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Add interrupt-queue underrun recovery to EHCINico Huber
If the queue of an interrupt transfer runs out, we have to reset the queue head. This also introduces the use of a spare transfer descriptor (TD) in interrupt queues, which assures, that a processed TD won't be reused until the host controller has written it back from his overlay. Change-Id: Id0eeb2808b77f1c187f164eb34bd66f8f399938b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1123 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-06-21libpayload: Adjust timeout in EHCI driverNico Huber
Tested with a bunch of usb flash sticks. The slowest non-TUR (test unit ready) turn around took about 1.3s, so this commit increases the timeout to 2s. Change-Id: Iec64b5cc48d51912b2bdeeebb5885399a71311b2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1120 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-21libpayload: reg_base reading for USB EHCI driverAnton Kochkov
Added reading registers base address for USB EHCI driver in ehci_init() function. Change-Id: I59443ca9823588d70822b4f14486caf217a5ac26 Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1106 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-20libpayload: Better error detection in USB mass storageNico Huber
This implements status transport (CSW) more closely to the standard (usbmassbulk_10). Change-Id: Ife516316e054d4e87ebe698dc487eeb9ebcfd38d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1072 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-06-20libpayload: Fix detach_contoller in the USB driverAnton Kochkov
Fixed usb controllers linked list walking in detach_controller() function Change-Id: Ia97c7ec814f75d2b1bfe185f160fb4cd32aa6fdb Signed-off-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-on: http://review.coreboot.org/1105 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-06-09libpayload: Add timeouts in the UHCI USB driverNico Huber
We should always have some timeout when we wait for the hardware. This adds missing timeouts to the UHCI driver. Change-Id: Ic37b95ce12ff3ff5efe3e7ca346090946f6ee7de Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1073 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-09libpayload: Fix an integer overflow in USB mass storageNico Huber
Change-Id: I3d618497016478ea727c520e866d27dbc3ebf9af Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1070 Reviewed-by: Mathias Krause <minipli@googlemail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-08libpayload: Add timeouts in the EHCI USB driverNico Huber
We should always have some timeout when we wait for the hardware. This adds missing timeouts to the EHCI driver. Change-Id: I13ba532a6daf47510b16b8fdbe572a21f1d8b09c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1077 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Add timeouts in the OHCI USB driverNico Huber
We should always have some timeout when we wait for the hardware. This adds missing timeouts and a more standard compliant port reset to the OHCI driver. Change-Id: I2cfcb1039fd12f291e88dcb8b74d41cb5bb2315e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1076 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Remove orphaned delay from OHCI USB driverNico Huber
This removes a synthetic delay of 5ms from every OHCI USB command. A delay here seems to be of no use and first tests have shown no glitches. Change-Id: Ie72b2d49e6734345708f04f3f7b86bacc7926108 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1075 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Add support for interrupt transfers in EHCINico Huber
This adds support for usb interrupt transfers in the EHCI driver. Split transactions are supported, so this enables support for HID keyboards devices over hubs in high-speed mode. Change-Id: I9eb08f12b12c67ece10814952cb8651278b02f9d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1083 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Free intr queue structure in usb_hid_destroyNico Huber
The call to destroy_intr_queue was missing in usb_hid_destroy. Change-Id: I51ccc6a79bc005819317263be24a56c51acd5f55 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1082 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Add support for split transactions in EHCINico Huber
With split transactions, the EHCI host controller can handle full- and low-speed devices on hubs in high-speed mode. This adds support for split transactions for control and bulk transfers. Change-Id: I30fa1ce25757f33b1e6ed34207949c9255f05d49 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1081 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-07libpayload: Bring USB hub driver to a working stateNico Huber
This adds proper device attachment and detachment detection and port enable- ment to the USB hub driver. Support for split transactions is still missing, so this works only with USB2.0 devices on hubs in USB2.0 mode and USB1.1 devices on hubs in USB1.1 mode. Change-Id: I80bf03f3117116a60382b87a4f84366370649915 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1080 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-01libpayload: Remove orphaned delay from USB mass storageNico Huber
This removes a synthetic delay of 10ms from every mass storage command. A delay here seems to be of no use and first tests have only shown a huge speed increase. Change-Id: Ida7423229373ec521d4326c5467a3f518b76149c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1071 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: Disable some buggy debugging codeNico Huber
This disables some debugging code in the OHCI USB driver which causes reboots under rare circumstances. Change-Id: Ic274c162846137ee00638ffbc59ccf1d8130586f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1074 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: fix OHCI IN commandsMathias Krause
Due to operator precedence incomming USB commands were missing some flags. Change-Id: I87ef51590c9db7a6cbc7304e1ccac29895f8a51e Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/1084 Reviewed-by: Mathias Krause <minipli@googlemail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: fix UHCI timeoutMathias Krause
UHCI commands should have a timeout of 30ms, not 30s! Change-Id: Iebcf338317164eb1e683e1de850ffab5022ca3a1 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/1085 Reviewed-by: Mathias Krause <minipli@googlemail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: Correct port power settings for EHCI root hubNico Huber
Enable power on EHCI root hub ports only if the controller supports it. Wait 20ms for the power to become stable. Change-Id: I8897756ed2bfcb88408fe5e9f9e3f8af5dd900ac Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1078 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-06-01libpayload: Add clear_feature() function to USB frameworkNico Huber
This function will be used by the USB hub driver. Change-Id: I4d1d2e94f4442cbb636ae989e8ffd543181c4357 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1079 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-31libpayload: Fix b0b4a52b70f0d7c09241f0f718a179fc55d85179Nico Huber
The removal of bitfields came with some glitches in the UHCI driver. This fixes it. Change-Id: Iba8ea3b56b03c526eca7b6388c019568e00be6f5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1069 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-09Update SeaBIOS URLPatrick Georgi
We have a http accessible SeaBIOS mirror at review.coreboot.org. Use it. Change-Id: Icce8e4f9ca1fa69966c82423b2b27057f15b30d2 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1020 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-29Update SeaBIOS stable to the version 1.7.0 tag.Marc Jones
Change-Id: Id3a2dd29e07ed11755468e89f8e80efdef5e2b2f Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/954 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-04libpayload: avoid excessive casts in printf.cMathias Krause
struct printf_spec is a purely internal structure. Avoid excessive casts when using the write function pointer just to make the compiler happy by using the right types in the first place. Change-Id: Ia4f3c79a5283cb76c8aa5f9d1eee758676303382 Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: http://review.coreboot.org/850 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-04libpayload: minor cleanupsMathias Krause
Apply some const correctness to const/non-const strings in libc and libpci (what an ugly cast that was). Remove duplicated NULL test in printf_putstr(), already done in print_string() - reduces size of libpayload by a few bytes. Change-Id: I13f479df13e39d79cab291e9d99d153e1ef43eae Signed-off-by: Mathias Krause <minipli@googlemail.com> Reviewed-on: http://review.coreboot.org/849 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-03-31Make libpayload parse the coreboot tables before setting up the consolesGabe Black
At least one of the console drivers, coreboot fb, uses information in the sysinfo structure to set itself up. If that structure hasn't been populated, the driver decides that there is no framebuffer and disables itself. Reversing the order these are set up fixes that problem. Change-Id: Idd8b5518980dfdd82fd4359dd0133ab7736fc428 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/816 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-21Fix libpayload alloc() size and gcc pointer optimization problems.Marc Jones
The previous commit was incomplete and missed setting the entire alloc area. There are also additional problems with gcc optimizations of the pointer math. The "auto" casting by gcc wouldn't return warnings, but it was causing the optimization to be incorrect. We are now very explicit in the casting in the pointer math. Change-Id: I020808c8d1dda544fe862b9efb0e5345eeab5aab Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/804 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-10Make libpayload alloc() memory pointers volatileMarc Jones
gcc4.6.2 was optimizing the libpayload alloc() function and failing to reload a pointer after the memory had been manipulated by a pointer in the inlined function setup(). Change the pointer type to volatile and now pass it to the setup() function. Also clean up the declaration so that it isn't cast a bunch times in the function. Change-Id: I1637bd7bd5d9cf82ac88925cbfe76d319aa3cd82 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/705 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-29tint requires more heap space for PDCurses.Marc Jones
tint was failing with the message "initscr(): Unable to create curscr." tint uses the initscr() to enable vga windows, which allocates more heap space with PDCurses than with tinycurses. Expanding the heap from 16KB to 64KB resolves the issue. Change-Id: I1d38651e2b77f55613969c29614fb3b2be38a00c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/687 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-20libpayload: fix compile error with enabled USB_DEBUGMathias Krause
Commit c4348d0 ("libpayload: Remove bitfield use from OHCI data structures") missed to adapt a debug message. This patch fixes this. Change-Id: I5f6a4be9c7f6f99cb103926772717e15a3cbca70 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/653 Tested-by: build bot (Jenkins) Reviewed-by: Bernhard Urban <lewurm@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-17libpayload: enforce const correctness for CMOS getter/setterMathias Krause
Input only arguments to {get,set}_option*() should be const to catch programming errors early. Change-Id: I560001a8e9226dfd156a4e529fcad20549236ebd Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/652 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17libpayload: fix compiler warning for first_cmos_entry()Mathias Krause
The 'name' argument to lookup_cmos_entry() is declared to be 'char *' but we pass an empty string ("") which is 'const char[]' so the compiler legitimatly warns about discarded qualifiers here. Fix this by passing NULL as 'name'. Minor nitpick: The NULL test in lookup_cmos_entry() is superfluous as our implementation of strnlen() can handle NULL pointers gracefully. But for an average C hacker it just doesn't feel right not to do so. Change-Id: I592917d12d8fa840804c0d19e38b844427064fef Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/651 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-13libpayload: code cosmeticsMathias Krause
Be consistend with coding style at least within a function -- don't mix sizeof with plain values. Change-Id: Iefb5b7fe4f54977f5505fc9cea65c9c4af3e7f3a Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/617 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-10libpayload: fix possible mem leak in get_option_as_string()Mathias Krause
Change-Id: I7c3adbd1b72be81585bbaabb42532fc4cad57f58 Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Reviewed-on: http://review.coreboot.org/616 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-07libpayload: Remove workaround for bitfield management in EHCI driverPatrick Georgi
We don't use bitfields anymore. Change-Id: I25ceec2024f659612871bcfe5f98df3a10789055 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/595 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07libpayload: Force checking all EHCI ports on power-onPatrick Georgi
EHCI port status reporting isn't very consistent on power-on, so just looking for devices on all ports is the safest way to find everything. Change-Id: I26b4305016f0bed1d2c1b5cffc59d5813fa1cbbb Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/594 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-07Move SeaBIOS output out of coreboot source treeStefan Reinauer
Make sure SeaBIOS build files live under $(OUT) instead of in the source tree. Change-Id: I7d357773e32bc25ba7e7eae3fb6ddc31feb413ec Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/552 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 16:44:23 +0000