summaryrefslogtreecommitdiff
path: root/payloads
AgeCommit message (Collapse)Author
2019-12-11libpayload/drivers/i8042: Add AT translated Keyboard supportEric Lai
Wilco device uses the AT translated keyboard and doesn't need to set scancode set. Remove the ignore flag and put into translation mode instead. BUG=b:145130110 TEST=Draillion keyboard is usable on every boot. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ie1053e24e44c5bad28b56cc92d091e24f3d9b6fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/37594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-12-11printf: Automatically prefix %p with 0xJulius Werner
According to the POSIX standard, %p is supposed to print a pointer "as if by %#x", meaning the "0x" prefix should automatically be prepended. All other implementations out there (glibc, Linux, even libpayload) do this, so we should make coreboot match. This patch changes vtxprintf() accordingly and removes any explicit instances of "0x%p" from existing format strings. How to handle zero padding is less clear: the official POSIX definition above technically says there should be no automatic zero padding, but in practice most other implementations seem to do it and I assume most programmers would prefer it. The way chosen here is to always zero-pad to 32 bits, even on a 64-bit system. The rationale for this is that even on 64-bit systems, coreboot always avoids using any memory above 4GB for itself, so in practice all pointers should fit in that range and padding everything to 64 bits would just hurt readability. Padding it this way also helps pointers that do exceed 4GB (e.g. prints from MMU config on some arm64 systems) stand out better from the others. Change-Id: I0171b52f7288abb40e3fc3c8b874aee14b9bdcd6 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2019-12-09payloads/bayou: remove unhooked payloadAngel Pons
The bayou payload is not attached to the build system in any way, and has not been for quite a while. Since selecting it in Kconfig does nothing, remove this payload now that coreboot 4.10 has been released. Change-Id: Icfb18b88e460a4e4b538b7efe907d4eef6c40638 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-12-06endian: Replace explicit byte swapping with compiler builtinJulius Werner
gcc seems to have some stupid problem with deciding when to inline byte swapping functions (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92716). Using the compiler builtin instead seems to solve the problem. (This doesn't yet solve the issue for the read_be32()-family of functions, which we should maybe just get rid of at some point?) Change-Id: Ia2a6d8ea98987266ccc32ffaa0a7f78965fca1cd Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-12-05arm64: Bump exception stack size to 2KBJulius Werner
To avoid trampling over interesting exception artifacts on the real stack, our arm64 systems switch to a separate exception stack when entering an exception handler. We don't want that to use up too much SRAM so we just set it to 512 bytes. I mean it just prints a bunch of registers, how much stack could it need, right? Quite a bit it turns out. The whole vtxprintf() call stack goes pretty deep, and aarch64 generally seems to be very generous with stack space. Just the varargs handling seems to require 128 bytes for some reason, and the other stuff adds up too. In the end the current implementation takes 1008 bytes, so bump the exception stack size to 2K to make sure it fits. Change-Id: I910be4c5f6b29fae35eb53929c733a1bd4585377 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-12-05trogdor: libpayload USB supportT Michael Turney
Change-Id: I26c28f9af8d819f4644e383e8d0293a3d5de9eef Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-04Change all clrsetbits_leXX() to clrsetbitsXX()Julius Werner
This patch changes all existing instances of clrsetbits_leXX() to the new endian-independent clrsetbitsXX(), after double-checking that they're all in SoC-specific code operating on CPU registers and not actually trying to make an endian conversion. This patch was created by running sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g' across the codebase and cleaning up formatting a bit. Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-12-04mmio: Add clrsetbitsXX() API in place of updateX()Julius Werner
This patch removes the recently added update8/16/32/64() API and replaces it with clrsetbits8/16/32/64(). This is more in line with the existing endian-specific clrsetbits_le16/32/64() functions that have been used for this task on some platforms already. Rename clrsetbits_8() to clrsetbits8() to be in line with the new naming. Keep this stuff in <device/mmio.h> and get rid of <mmio.h> again because having both is confusing and we seem to have been standardizing on <device/mmio.h> as the standard arch-independent header that all platforms should include already. Also sync libpayload back up with what we have in coreboot. (I'm the original author of the clrsetbits_le32-definitions so I'm relicensing them to BSD here.) Change-Id: Ie4f7b9fdbdf9e8c0174427b4288f79006d56978b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37432 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-02lib/coreboot_table: Add CBMEM_ID_VBOOT_WORKBUF pointer to coreboot tableYu-Ping Wu
Since struct vb2_shared_data already contains workbuf_size and vboot_workbuf_size is never used in depthcharge, remove it from struct sysinfo_t. In addition, remove lb_vboot_workbuf() and add CBMEM_ID_VBOOT_WORKBUF pointer to coreboot table with add_cbmem_pointers(). Parsing of coreboot table in libpayload is modified accordingly. BRANCH=none BUG=chromium:1021452 TEST=emerge-nami coreboot libpayload depthcharge; Akali booted correctly Change-Id: I890df3ff93fa44ed6d3f9ad05f9c6e49780a8ecb Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-28libpayload: Add BIT(x) macro definitionsatya priya
Add BIT(x) macro definition in libpayload. Change-Id: I15ca2d3758d516cecf9edd60af47e7fdbd808c40 Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
Kconfig became stricter on what it accepts, so accomodate before updating to a new release. Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-11-20Remove MIPS architectureJulius Werner
The MIPS architecture port has been added 5+ years ago in order to support a Chrome OS project that ended up going nowhere. No other board has used it since and nobody is still willing or has the expertise and hardware to maintain it. We have decided that it has become too much of a mainenance burden and the chance of anyone ever reviving it seems too slim at this point. This patch eliminates all MIPS code and MIPS-specific hacks. Change-Id: I5e49451cd055bbab0a15dcae5f53e0172e6e2ebe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34919 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20Remove imgtec/pistachio SoCJulius Werner
After removing urara no board still uses this SoC, and there are no plans to add any in the future (I'm not sure if the chip really exists tbh...). Change-Id: Ic4628fdfacc9fb19b6210394d96431fdb5f8e8f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36491 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-19mmio: Fix buffer_to_fifo32() order of argumentsJulius Werner
buffer_to_fifo32() is a simple wrapper to buffer_to_fifo32_prefix(), but unfortunately its arguments are swapped. This patch fixes the issue. Change-Id: I6414bf51dd9de681b3b87bbaf4ea4efc815f7ae1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36942 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-16libpayload: keyboard: Ignore special keysThejaswani Putta
Some special keys emit a prefix scan code 0xE0. We will ignore all these except for the power button, F12 and cursor keys on drallion. Media key mapping is set in depthcharge and will be sent to libpayload keyboard driver. Whichever board requires this change will update its own media key mapping. BUG:b:139511038 TEST=boot in recovery mode, press F12 to go to diagnostic mode and power button to confirm. Also in recovery mode left arrow, right arrow, up arrow, down arrow changes the language on the firmware screen. Change-Id: I1c11939d18391bebe53ca21cf33a096ba369cd56 Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36654 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14Fix sarien depthcharge make buildSelma BENSAID
CONFIG_MAINBOARD_DEPTHCHARGE is set to "" for boards not configuring it. Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: If61a1371ad8baf165b09ce045fc1a6c205c2c0ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/36336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-12payloads/external/GRUB2: Check for existing grub2 directoryWerner Zeh
When 'make clean' is executed and there is no source code cloned for GRUB2 in payloads/external/GRUB2/grub2 (so GRUB2 has never been used on this tree) an error message is thrown: "fatal: cannot change to 'grub2': No such file or directory" This error happens when there is no grub2 directory and is caused by line 20 in payloads/external/GRUB2/Makefile where a shell command is used to check the state of the git repo for grub2. Thought the target for this code (checkout) is not executed by 'make clean' the shell evaluates the command as part of the Makefile sourcing and encounters a missing directory. This patch fixes this error by checking for the project directory before the git status of the repo is evaluated. Change-Id: Ieaa919e1ee5ec2a1ec3c840fa07a6ec16d230e88 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-11libpayload: usbmsc: update return value of CSW transferChangqi Hu
When the first CSW transfer failed, get_csw function will retry CSW transfer again, but the return value is not updated. Change-Id: I289916baa08d0a189d659164a0002347f6f435db Signed-off-by: Changqi Hu <changqi.hu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-04payloads/external/GRUB2: fix constantly rebuilding due to git checkoutMichael Niewöhner
Multiple git checkouts cause GRUB2 to constantly rebuild even if there were no changes to code or config. This is due to changing timestamps. Fix this by not creating or switching branches but instead rely on `git checkout -f` which does not touch existing unchanged files. To be sure to not break anyones workflow checkout is skipped and a warning gets printed if the tree/index is unclean. Change-Id: I7cf66f63268de973a654146a0a47c3d5ca516d4d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36343 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-30libpayload: handle special-class-handlers before sourcesArthur Heymans
This matches the coreboot makefile behavior. Change-Id: Iaada965de904cb03edd068fed8827643496292cb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36439 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18util/cbfstool: Add optional argument ibbPhilipp Deppenwiese
* Mark files in CBFS as IBB (Initial BootBlock) * Will be used to identify the IBB by any TEE Change-Id: Idb4857c894b9ee1edc464c0a1216cdda29937bbd Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03libpayload: refactor fetching cbmem pointersPatrick Georgi
There's a recurring pattern of reading cbtable entries that point into cbmem entries. Move that pattern into its own function. Coccinelle patch used for this: @@ identifier T, T2; expression TARGET; @@ -struct cb_cbmem_tab *const T2 = (struct cb_cbmem_tab *)T; -TARGET = phys_to_virt(T2->cbmem_tab); +TARGET = get_cbmem_ptr(T); Change-Id: I7bd4a7ad8baeeaebf0fa7d4b4de6dbc719bc781f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-10-02libpayload: Add fmap_cache to sysinfo_tFurquan Shaikh
Now that FMAP is cached in CBMEM and its pointer is added to coreboot table for quick lookup, this change adds a new member "fmap_cache" to sysinfo_t that can be used by payloads to get to FMAP cache. BUG=b:141723751 Change-Id: If894c20c2de89a9d8564561bc7780c86f3f4135a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02coreinfo/coreinfo.c: Support both lower and upper case alphabetsHimanshu Sahdev
Modify handle_category_key to handle both upper and lower case alphabets in the coreinfo payload. Change-Id: I3ccbf69e90ba7824ad6ec85d2ca59aa8f40b3006 Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-24depthcharge: add CONFIG_MAINBOARD_DEPTHCHARGESelma BENSAID
CONFIG_MAINBOARD_DEPTHCHARGE is used to override the Board config for depthcharge which inherit from CONFIG_MAINBOARD_PART_NUMBER. This is mainly to avoid depthcharge config duplication. Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I6cbc93ca38ad6deeca2c2fb7770024a24233b6f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-09-18libpayload: Use interrupt transfers for USB hubsNico Huber
In interactive payloads, the USB stack's poll procedure is implicitly called from the UI loop. Since all USB control transfers are handled synchronously, polling hubs with these slows the UI significantly down. So switch to interrupt transfers that are done asynchronously and only perform control transfers when the hub reported a status change. We use the interrupt endpoint's max packet size instead of the theo- retical transfer length of `(bNrPorts + 1) / 8` as Linux' code mentions hubs that return too much data. Change-Id: I5af02d63e4b8e1451b160b77f3611b93658a7a48 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/18499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-15payloads/LinuxBoot: move kernel make flags into own variableAlexander Couzens
Change-Id: I9240043d2c15b68aabe154b289a961d8d48d3e5f Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-09-02payloads/external/LinuxBoot: Add curl flagMarcello Sylvester Bauer
add --show-error curl flag to see the error message, even on silent mode. Signed-off-by: Marcello Sylvester Bauer <sylvblck@sylv.io> Change-Id: I4ad40718caab60413ffe9c1503a9870cb875dd43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-27libpayload/usb: add USB 3.1 GEN2 supportEric Lai
USB 3.1 GEN2 report speed type 4, add into speed enum. BUG=b:139787920 BRANCH=N/A TEST=Build libpayload and depthcharge on sarien and boot with USB GEN2 HUB with USB disk. Check ultra speed device in cbmem log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia0ef12b2f0d91bf0d0db766bbc9019de1614a4f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35023 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22libpayload: usbmsc: Factor out usb_msc_force_init() functionJulius Werner
We're planning to have a use case with a custom USB device that implements the USB mass storage protocol on its bulk endpoints, but does not have the normal MSC class/protocol interface descriptors and does not support class-specific control requests (Get Max LUN and Bulk-Only Reset). We'd like to identify/enumerate the device via usb_generic_create() in our payload but then reuse all the normal MSC driver code. In order to make that possible, this patch factors a new usb_msc_force_init() function out of usb_msc_init() which will initialize an MSC device without checking its descriptors. It also adds some "quirks" flags that allow devices registered this way to customize behavior of the MSC stack. Change-Id: I50392128409cb2a879954f234149a5e3b060a229 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34227 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-22libpayload: usbmsc: Skip zero-length packets at end of dataJulius Werner
Some broken USB mass storage devices send another zero-length packet at the end of the data part of a transfer if the amount of data was evenly divisible by the packet size (which is pretty much always the case for block reads). This packet will get interpreted as the CSW and screw up the MSC state machine. This patch works around this issue by retrying the CSW transfer when it was received as exactly 0 bytes. This is the same mitigation the Linux kernel uses and harmless for correctly behaving devices. Also tighten validation of the CSW a little, making sure we verify the length before we read any fields and checking the signature in addition to the tag. Change-Id: I24f183f27b2c4f0142ba6c4b35b490c5798d0d21 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34485 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-22Add buffer_to/from_fifo32(_prefix) helpersJulius Werner
Many peripheral drivers across different SoCs regularly face the same task of piping a transfer buffer into (or reading it out of) a 32-bit FIFO register. Sometimes it's just one register, sometimes a whole array of registers. Sometimes you actually transfer 4 bytes per register read/write, sometimes only 2 (or even 1). Sometimes writes need to be prefixed with one or two command bytes which makes the actual payload buffer "misaligned" in relation to the FIFO and requires a bunch of tricky bit packing logic to get right. Most of the times transfer lengths are not guaranteed to be divisible by 4, which also requires a bunch of logic to treat the potential unaligned end of the transfer correctly. We have a dozen different implementations of this same pattern across coreboot. This patch introduces a new family of helper functions that aims to solve all these use cases once and for all (*fingers crossed*). Change-Id: Ia71f66c1cee530afa4c77c46a838b4de646ffcfb Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-08-21payloads/tianocore: Enable UEFIPayloadLijian Zhao
corebootpayload package in upstream TianoCore was replaced with UEFIPayload, add external payload build option for UEFIPayload. BUG=N/A TEST=Select TianoCore payload as UEFIPayload, build and able to boot up on QEMU q35 after PCIE_BASE set. Change-Id: I0b7785fde9f4113b2cd91323ac0358b229c5a6e6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34459 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20Makefile.inc, payloads: Enable -WvlaJacob Garber
Variable length arrays are dangerous, so let's make sure they don't sneak back into coreboot or any of the payloads. Change-Id: Idf2488cf0efab51c9569a3789ae953368b61880c Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33846 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08arch/riscv: Enable FIT supportJonathan Neuschäfer
Tested on qemu-riscv. Depends on OpenSBI integration and proper memory detection in qemu. Boots into Linux until initrd should be loaded. Tested on SiFive/unleashed: Boots into Linux until earlycon terminates. Change-Id: I5ebc6cc2cc9e328f36d70fba13555386bb8c29d6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30292 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08libpayload: cbgfx: Allow rotation of the displayNicolas Boichat
Sometimes the display native orientation does not match the device default orientation, so allow rotation of the framebuffer before it is displayed on screen. set_pixel now take coordinates in the rotated coordinate system, and converts the coordinates before writing to the framebuffer. Also, screen.size now matches the rotated system (_not_ the framebuffer size). BUG=b:132049716 TEST=Boot krane, see that FW screen is orientation properly. Change-Id: If9316c0ce33c17057372ef5995a2c68de4f11f02 Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2019-07-26libpayload/serial/qcs405: Mark uart console as suchPatrick Georgi
depthcharge prefers knowing where its input comes from BUG=b:137378326 BRANCH=none TEST=ctrl-d / enter to enter dev-mode works now. Change-Id: I74b5be18c3583be17c73950ced93fad883690090 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-25payloads/external/Yabits: Pass XGCCPATHNico Huber
Pass `XGCCPATH` instead of individual programs as that is what the Makefile expects. Change-Id: I3267ec5259e9d37b2f3b0b8c126d173fc8b5a3ca Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-23vboot: deprecate vboot_handoff structureJoel Kitching
vboot_handoff is no longer used in coreboot, and is not needed in CBMEM or cbtable. BUG=b:124141368, b:124192753 TEST=make clean && make runtests BRANCH=none Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23libpayload/libc: Use size_t for lengths and indicesJacob Garber
size_t is the natural integer type for strlen() and array indices, and this fixes several integer conversion and sign comparison warnings. Change-Id: I5658b19f990de4596a602b36d9533b1ca96ad947 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33794 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23libpayload/libc: Tidy utf16le_to_asciiJacob Garber
- Constify the string argument - Change int to size_t, which is what xmalloc expects Change-Id: I8b5a13319ded4025f883760f2b6d4d7a9ad9fb8b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-23libpayload/libc: Correct strlcat return valueJacob Garber
The documented return value for strlcat is horribly wrong, as is the return value itself. It should not return the number of appended bytes, but rather the length of the concatenated string. From the man page: The strlcpy() and strlcat() functions return the total length of the string they tried to create. For strlcpy() that means the length of src. For strlcat() that means the initial length of dst plus the length of src. While this may seem somewhat confusing, it was done to make truncation detection simple. This change is more likely to fix existing code than break it, since anyone who uses the return value of strlcat will almost certainly rely on the standard behaviour rather than investigate coreboot's source code to see that we have a quirky version. Change-Id: I4421305af85bce88d12d6fdc2eea6807ccdcf449 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-21libpayload: Enable -Wimplicit-fallthroughJacob Garber
Add comments to intentional fall throughs and enable the warning. Change-Id: I93e071c4fb139fa6e9cd8a1bfb5800f5f4eac50b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-19payloads/GRUB: Use correct script name in MakefileGompa
Fixes: 3555389a8c (payloads: Update GRUB stable from 2.02 to 2.04) Change-Id: I2f95059453ca5565a38550b147590ece4d8bf5ad Signed-off-by: Gompa <gompa@h-bomb.nl> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-13util/testing: Ensure coreboot-gerrit fails if libpayload build failsKeith Short
The JUnit output from the libpayload builds was getting deleted by the coreinfo build. Move the libpayload to later in the coreboot-gerrit job. Also add messages to stdout indicating the various libpayload configs that are built and a message indicating when all libpayload builds are complete. BUG=b:137380189 TEST=Upload test commit that includes a libpayload compile error and verify buildbot fails. Change-Id: I43b55f402216582dcf81be34171437be345572ab Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34183 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13payloads: Update GRUB stable from 2.02 to 2.04Paul Menzel
GRUB 2.04 was released on July 5th, 2019, so update. The only change-log is the git history. Some coreboot related changes are listed below. 1. coreboot: Changed cbmemc to support updated console format from coreboot. 2. ahci: Increase time-out from 10 s to 32 s 3. normal/menu: Do not treat error values as key presses When building from the git repository, `./bootstrap.sh` needs to be run to set up Gnulib. Ignore the exit code, as older versions might not have this script. Change-Id: Iab0b87164ed86f15d3415af935998b59e0d76c45 Signed-off-by: Pablo <42.pablo.ms@gmail.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-09libpayload/usb: fix DWC2 driverPatrick Georgi
A typo introduced in commit bf2c693f893ab6f9458f1a4840c2a9cbbd4bb9f2 made the driver not build: DWC_SLEEP_TIME_US instead of DWC2_SLEEP_TIME_US. Change-Id: I197b25fd4f568cce7a4bbcee8cc285b25b26afb1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Keith Short <keithshort@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-08payloads/external/Memtest86Plus: update to version 002 stableMartin Kepplinger
The memtest86plus project has been tagged as stable. Update the coreboot build accordingly. Change-Id: I078ac5d91e60a424efb5e14f39ae59e7ae9cbfe2 Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-07payloads/coreinfo: Enable -Wmissing-prototypesJacob Garber
Change-Id: I7ee9436ba71ceea35a35272291ea245c0b7c37c5 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-07-07payloads/coreinfo: Make internal functions staticJacob Garber
These functions are only used in the files they are defined in, so they can be made static. Change-Id: Ic7f78912803cbdd1cb3a75f7f69f526739dab6e7 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 22:15:17 +0000