summaryrefslogtreecommitdiff
path: root/payloads
AgeCommit message (Collapse)Author
2020-09-13libpayload: malloc: Fix realloc for overlapping buffersYu-Ping Wu
The current realloc() works by freeing the origin buffer, allocating a new one, and copying the data over. It's true that free() won't touch the actual memory. However, the alloc() following it will potentially modify the memory that belongs to the old buffer in order to create a new free block (right after the newly allocated block). This causes 8 bytes (HDRSIZE) to be overwritten before being copied to the new buffer. To fix the problem, we must create the header of the new free block after the data is copied. In this patch, the content of alloc() is split into two functions: 1. find_free_block(): Find a free block with large enough size, without touching the memory 2. use_block(): Update the header of the newly allocated block, and create the header of the new free block right after it Then, inside realloc(), call memmove() call right after find_free_block() while before use_block(). BUG=b:165439970 TEST=emerge-puff libpayload TEST=Puff boots TEST=Verified realloc() correctly copied data when buffers overlapped Change-Id: I9418320a26820909144890300ddfb09ec2570f43 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-04libpayload/xhci: Fix Slot State field width definitionCaveh Jalali
According to the xHCI spec, the Slot State field in the Slot Context Data Structure is 5 bits wide. So, fix the code to match. ref. xHCI spec 1.2 section 6.2.2, Figure 6-2: Slot Context Data Structure BUG=none TEST=xHCI compiles Change-Id: I0ae735af3d0840aeee846fa939c37af9aea3dff1 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45023 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-31xhci: Do not set the CRCR_CS bitCaveh Jalali
We do not need to set the CS (Command Stop) bit in the Command Ring Control Register. CS is implied by CA (Command Abort). I'm not sure if there is a defined execution order for these command bits, so it's safer to only use the CA bit as it includes the CS function. Ref: xHCI spec 1.2 (May 2019), Section 5.4.5, Table 5-24. BUG=b:160354585,b:157123390 TEST=able to boot into recovery using USB stick on servo v2 on volteer as well as HooToo 8-1 hub Change-Id: Iaeba98b6da8da49f529358ca6d68270440ea0f42 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-31xhci: Fix Abort command event handlingCaveh Jalali
This fixes issues with how we handle events generated by the xHCI "command abort" command. first, depending on the state of the xHCI controller, the COMMAND_ABORTED may not be generated. If the controller was between commands, only the COMMAND_RING_STOPPED event will be generated. Second, do not adjust the command ring "cur" pointer as that just confuses the controller. BUG=b:160354585,b:157123390 TEST=able to boot into recovery using USB stick on servo v2 on volteer as well as HooToo 8-1 hub Change-Id: I055df680d1797f35d9730e2bfdb4119925657168 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-28libpayload: cbgfx: Support buffered I/OHung-Te Lin
For payloads with UI based on CBGFX, they usually start by calling clear_canvas or clear_screen and then draw the UI elements. However, that makes the screen flicker. A typical solution is to identify and minimize the area to redraw. However for payloads with complicated UI and do not care about latency, an alternative is to enable buffered I/O. The new enable_graphics_buffer() will redirect all graphics I/O into an invisible working buffer. To flush (redraw) the buffer to the real screen, call flush_graphics_buffer(). To stop buffering, call disable_graphics_buffer(). BUG=None TEST=Add the enable, flush and disable calls to payload 'depthcharge', built a firmware and boots into Chrome OS recover UI. No more flickering. The average rendering time on x86 platform is 1.2ms. Change-Id: Id60a2824fd9e164feae16b92b68b003beabea8d3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44654 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-24libpayload: memmove: Don't make expectations of architecture memcpyJulius Werner
default_memmove() calls memcpy() when (src > dst). This is safe for the default_memcpy() implementation, but just calling memcpy() may invoke an architecture-specific implementation. Architectures are free to implement memcpy() however they want and may assume that buffers don't overlap in either direction. So while this happens to work for all current architecture implementations of memcpy(), it's safer not to rely on that and only rely on the known implementation of default_memcpy() for the forwards-overlapping case. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I7ece4ce9e6622a36612bfade3deb62f351877789 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-24libpayload: Cache physical location of stringsNico Huber
In the presence of self-relocating payloads, it's safer to keep physical addresses in `libsysinfo`. This updates the remaining pointers that are not consumed by libpayload code, all of them strings. Also update the comment that `libsysinfo` only containts physical addresses. Change-Id: I9d095c826b00d621201c34b329fb9b5beb1ec794 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-24libpayload: Cache physical location of CBMEM entriesNico Huber
In the presence of self-relocating payloads, it's safer to keep physical addresses in `libsysinfo`. This updates all the references to CBMEM entries that are not consumed inside libpayload code. Change-Id: I3be64c8be8b46d00b457eafd7f80a8ed8e604030 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-24libpayload: Cache physical location of cb_table entriesNico Huber
In the presence of self-relocating payloads, it's safer to keep physical addresses in `libsysinfo`. This updates all the references to coreboot-table entries that are not consumed inside libpayload code. Change-Id: I95cb0af151e0707a1656deacddb8a5253ea38fc3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-24libpayload: Cache copy of `cb_framebuffer` structNico Huber
Our AArch64 code supports dynamic framebuffer allocation which makes it necessary to change the framebuffer information during runtime. Having a pointer inside `libsysinfo` made a mess of it as the pointer would either refer to the original struct inside the coreboot table or to a new struct inside payload space. The latter would be unaffected by a relocation of the payload. Instead of the pointer, we'll always keep a copy of the whole struct, which can be altered on demand without affecting the coreboot table. To align the `video/graphics` driver with the console driver, we also replace `fbaddr` with a macro `FB` that calls phys_to_virt(). Change-Id: I3edc09cdb502a71516c1ee71457c1f8dcd01c119 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-24libpayload: Cache physical location of serial-console structNico Huber
In the presence of self-relocating payloads, it's safer to keep physical addresses in `libsysinfo`. Change-Id: Icd30e95c6b8115d16dd793914fb01a1a9da1854f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-24libpayload: Cache physical CMOS option table locationNico Huber
In the presence of self-relocating payloads, it's safer to keep physical addresses in `libsysinfo`. Change-Id: I64a37bef263022edb504086c02a3fd22ce068ba4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-24libpayload: Cache physical cbmem console addressNico Huber
Same as with other consoles and drivers that cache an address outside the payload (e.g. video/corebootfb), we should store the physical address, so we can derive the virtual address on demand. This makes it save to use the address across relocations. As a first step in migrating `libsysinfo` to `uintptr_t`, we also switch to the physical address there. Fixes the default build of FILO, tested with Qemu/i440FX and Qemu/Q35. Change-Id: I4b8434af69e0526f78523ae61981a15abb1295b0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-19arch/arm: Enable FIT payloadsSam Lewis
Implements fit_payload_arch for the arm (aarch32) architecture, so that FIT images can be used. The implementation is very similar to the existing implementations for arm64 and riscv, and has mostly been lifted from these other ports. TEST: Booted Beaglebone Black (in progress port, to be submitted soon!) with a FIT image containing a 5.4 kernel, dtb and initramfs. Change-Id: I6b50c6f06b83c00a5b3622b5bbafe67130b6d233 Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-08-18payloads/nvramcui: Fix `make clean`Nico Huber
After `make clean` a new build should not be based on stale artifacts. Hence we have to remove them. Change-Id: I540a83a6c87b843b1c4c9c55990bf3e91fe90d79 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-18payloads/coreinfo: Fix `make clean`Nico Huber
After `make clean` a new build should not be based on stale artifacts. Hence we have to remove them. Change-Id: I18292c674986078d991668124193b6aa31234d47 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-17payloads/seabios: Update stable version to 1.14.0Elyes HAOUAS
see https://seabios.org/Releases Change-Id: I20e57314b867581f41921178ff1ffcbaa50a0843 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2020-08-17libpayload/defconfig: Set default heap size to 1MiBNico Huber
libpayload's drivers keep growing. With certain hardware/payload combinations (last time witnessed with Kontron/bSL6 and FILO), the default configuration runs out of memory. As there is a lot enabled by default, also set a big default heap size. Tested with FILO on QEMU/Q35. Change-Id: I51a1514097aeb8b3c835a2387db66869b81d0bcc Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-08-13libpayload: cbgfx: Add color mapping functionalityYu-Ping Wu
Similar to set_blend(), add set_color_map() for mapping background and foreground colors of a bitmap. Also add clear_color_map() for clearing the saved color mappings. Note that when drawing a bitmap, the color mapping will be applied before blending. Also remove unnecessary initialization for static variable 'blend'. BRANCH=puff BUG=b:146399181, b:162357639 TEST=emerge-puff libpayload Change-Id: I640ff3e8455cd4aaa5a41d03a0183dff282648a5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-28libpayload: Replace include/compiler.h with commonlib/bsd's versionPatrick Georgi
This ensures that it's available under BSD license terms. Change-Id: Ica13014b847473fee02516be0b27684c6cfb07bc Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43964 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-25payloads/libpayload/drivers/usb/usb.c: Remove whitespace before tabElyes HAOUAS
Change-Id: Iba73ae4d89cef94f238e9a74300f6088669f355b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-25payloads/libpayload/curses/menu/eti.h: Remove unneeded whitespacesElyes HAOUAS
Change-Id: Ia77c5be4b22740f88fb9c11bff95036adbd8145f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-25payloads/libpayload/arch/arm/cpu.S: Remove whitespaces before tabElyes HAOUAS
Change-Id: I2960f95937db23aa3a38ca64085728e6d10968f8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-25payloads/external/tint/Makefile: Remove whitespaces before tabElyes HAOUAS
Change-Id: Ie08e92778e029b962cf0ed5f95ab740458e82fc5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-23libpayload: cbgfx: Add draw_line()Yu-Ping Wu
Add a function draw_line() to draw either a horizontal or vertical line segment. Theoretically a horizontal line can also be drawn by calling draw_rounded_box() with dim_rel.x being the line length and dim_rel.y being the line width. However, due to the truncation in integer division when converting relative coordinates to absolute ones, this will potentially produce inconsistent line widths, depending on the value of pos_rel.y. It is guaranteed that draw_line() will produce consistent line widths, regardless of the position of the line. Also, when the thickness argument is zero, this function is able to draw a line with 1-pixel width, which is not achievable by draw_rounded_box(). BRANCH=puff BUG=b:146399181, b:161424726 TEST=emerge-puff libpayload Change-Id: I2d50414c4bfed343516197da9bb50791c89ba4c2 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2020-07-21libpayload/xhci: Try harder to read 32-bit caps at onceNico Huber
With commit 287cf6c7d1 (lp/drivers/usb: Work around QEMU XHCI register issue) we restructured our capability register accesses because the compiler used the wrong access size. While we do use only 32-bit types now, a compiler may still try to be clever and optimize things in unexpected ways. So we add an explicit read32() now. For instance for the 8-bit MaxPorts field, in the most significant bits of `capreg + 4`, our read + mask + shift ((cap)->hciparams1 & 0xff000000) >> 24 was turned into a single 8-bit read instruction by GCC on x86: 31: 0f b6 52 07 movzbl 0x7(%edx),%edx Change-Id: I76accd0ef718e70ca46807eb06a9177c3afd99f1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-16libpayload: allow nonblocking delay and more than one delayRonald G Minnich
Extend the local APIC timer delay so that it can be started, and waited for, independently. Add an EOI so that more than one APIC timer interrupt is possible. Previous to this, because there was no EOI, the first timer interrupt the CPU took was also the last it would take -- apic_delay would only work one time. Change-Id: Ib11aeee5b7da81287166ac68fc327e7ae62d1b84 Signed-off-by: Ronald G Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-07-15cbgfx: Add blend functions to calculate transparencyShelley Chen
Up until now we have no way of adding transparency into our firmware screens. Add set_blend() and clear_blend() functions to store alpha value and rgb values to calculate alpha blending in calculate_colors(). BUG=b:144969091,b:160839199 BRANCH=puff TEST=dut-control power_state:rec press ctrl-d Ensure background is dimmed when dialog pops up Change-Id: I95468f27836d34ab80392727d726a69c09dc168e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-15payloads/depthcharge: Makefile: resolve fail of concurrent buildMichael Niewöhner
Resolve missing dependency to fix concurrent building. Resolves: https://ticket.coreboot.org/issues/271 Change-Id: Idbd9155e01fcc4571a61f1bba5b2b4a446036da0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-07-12payloads/external: fix depthcharge build from sourceSelma BENSAID
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Change-Id: I17ae7450a9641268fe392bed0f24846abc8e6f56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43203 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-12payloads/tianocore: Don't recurse submodulesBenjamin Doron
Upstream does not require it. From the repository readme: "Note: When cloning submodule repos, '--recursive' option is not recommended. EDK II itself will not use any code/feature from submodules in above submodules. So using '--recursive' adds a dependency on being able to reach servers we do not actually want any code from, as well as needlessly downloading code we will not use." Change-Id: I0c5d6dd6e5070720870fc22b2476c6fe8dc7fd40 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-07-09libpayload: cbgfx: Replace bilinear resampling with LanczosJulius Werner
This patch improves the image resampling (scaling) code in CBGFX to use the Lanczos algorithm that is widely considered the "best" resampling algorithm (e.g. also the first choice in Python's PIL library). It is of course much more elaborate and therefore slower than bilinear resampling, but a lot of the difference can be made up with optimizations, and the resulting code was found to still produce acceptable speeds for existing Chrome OS UI use cases (on an Arm Cortex-A55 device, time to scale an image to 1101x593 went from ~88ms to ~275ms, a little over 3x slowdown). Nevertheless, if this should be too slow for anyone there's also an option to tune it down a little, but still much better than bilinear (same operation was ~170ms with this). Example images (scaled up by a factor of 7): Old (bilinear): https://i.imgur.com/ytr2n4Z.png New (Lanczos a=3): https://i.imgur.com/f0vKluM.png Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Idde6f61865bfac2801ee4fff40ac64e4ebddff1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-07-09libpayload: Add simple 32.32 fixed-point math APIJulius Werner
struct fraction is slooooooooooow. This patch adds a simple 64-bit (32-bits integral, 32-bits fractional) fixed-point math API that is *much* faster (observed roughly 5x speed-up) when doing intensive graphics operations. It is optimized for speed over accuracy so some operations may lose a bit more precision than expected, but overall it's still plenty of bits for most use cases. Also includes support for basic trigonometric functions with a small lookup table. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id0f9c23980e36ce0ac0b7c5cd0bc66153bca1fd0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-07-08libpayload: arm64: silence libpayload main entryMichael Walle
No other architecture in libpayload outputs anything in the main entry routine. Let alone an exception test which looks like a real exception to the normal user and is most likely really misleading. Silence the startup code. Change-Id: I6e49f24ad46ce578a4bb111c2d623ca4470a1866 Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43126 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08libpayload: arm64: fix OUTPUT_ARCH()Michael Walle
There is no bfd "arm64". The correct bfdname is "aarch64". Fix it. With this change libpayload will build with the AArch64 GCC. Change-Id: If7a6b14691107c5d4fc67c3cd3990ecc849d4af1 Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-06libpayload: cbgfx: Fix add_fractions() overflow reductionJulius Werner
log2(1) is 0 and log2(0) is -1. If we have the int64_t 0xffffffff then log2(0xffffffff >> 31) = log2(0x1) = 0, so the current reduction code would not shift. That's a bad idea, though, since 0xffffffff when interpreted as an int32_t would become a negative number. We need to always shift one more than the current code does to get a safe reduction. This also means we can get rid of another compare/branch since -1 is the smallest result log2() can return, so the shift can no longer go negative now. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib1eb6364c35c26924804261c02171139cdbd1034 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-28libpayload/cbgfx: Fix overflow in transform_vector()Yu-Ping Wu
Fix potential overflow when multiplying integers in transform_vector(). This issue is causing the absolute coordinate of the bottom right corner of the box to be incorrectly calculated for draw_rounded_box(), which is used in menu UI to clear the previous screen. In addition, check the lower bound in within_box(). BRANCH=none BUG=b:146399181, b:159772149 TEST=emerge-puff libpayload TEST=Previous screen is cleared properly for menu UI Change-Id: I57845f54e18e5bdbd0d774209ee9632cb860b0c2 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42770 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22libpayload: gdb: Condition video console init on LP_VIDEO_CONSOLEYu-Ping Wu
With the stub video_console_init() removed from depthcharge in CL:2241493, depthcharge will fail to compile: payloads/libpayload/gdb/stub.c:76: undefined reference to `video_console_init' Since video_console_init() is meant to be implemented in libpayload, libpayload should be consistent with itself by not calling this function when it's not implemented (i.e., when !LP_VIDEO_CONSOLE). Therefore, initialize video console only if LP_VIDEO_CONSOLE is set. BRANCH=none BUG=none TEST=USE="menu_ui" emerge-gale depthcharge Change-Id: Ic45f9073330258cb77301003484ec525b2404180 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42505 Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06payloads/external: s/PROMT/PROMPT/gAngel Pons
Change-Id: Id305d9edecac9e9cd305301e9dc5af6678ef7528 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-06usb/xhci: Fix timeout logicCaveh Jalali
This fixes a logic bug in how timeouts are reported back. In the timeout case, the original code would return -1 instead of 0. All call sites expect a return value of 0 as the timeout indicator. Signed-off-by: Caveh Jalali <caveh@chromium.org> Change-Id: I81a888aa0a1544e55e6a680be8f3b7f6e0d87812 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-06libpayload: drivers/usb: add a USB pre-poll hookCaveh Jalali
This adds a hook so that a payload can optionally perform USB service functions in conjunction with regular USB port status polling. In particular, this allows depthcharge to control the state of an external USB mux. Some SoCs like Tiger Lake have a USB mux for Type-C ports that must be kept in sync with the state of the port as reported by the TCPC. This can be achieved by hooking into the poll routine to refresh the state of the USB mux. BUG=b:149883933 TEST=booted into recovery from Type-C flash drive on volteer Change-Id: Ic6c23756f64b891b3c5683cd650c605b8630b0fb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-28payloads/libpayload/libc: Avoid NULL pointer dereferenceHarshit Sharma
Avoid dereferencing a NULL pointer in case of function parameter 'ptr'. Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Change-Id: I5dba27d9757fb55476f3d5848f0ed26ae9494bee Reviewed-on: https://review.coreboot.org/c/coreboot/+/41698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-28payloads/libpayload/libc: Do cosmetic fixesHarshit Sharma
Make the code follow the coding style. Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com> Change-Id: I4ca168c4aedddef51103b270f105feab93739ecc Reviewed-on: https://review.coreboot.org/c/coreboot/+/41649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-26libpayload/cbgfx: Remove gap between adjacent boxesYu-Ping Wu
When drawing two adjacent boxes with draw_box(), there will be a gap between them. This is due to the truncation in integer division when calculating the bottom right coordinate of the box. In this patch, the relative bottom right coordinate is calculated before transforming to an absolute one. The same issue is also fixed for draw_rounded_box(). Also check validity of 'pos_rel' and 'dim_rel' arguments for draw_rounded_box(). BRANCH=none BUG=chromium:1082593 TEST=emerge-nami libpayload Change-Id: I073cf8ec6eb3952a0dcb417b4c3c3c7047567837 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-18libpayload: Fix definitions of minimum integer valuesYu-Ping Wu
Fix incorrectly defined constants INT16_MIN, INT32_MIN and INT64_MIN, which recursively call themselves. BRANCH=none BUG=none TEST=emerge-nami libpayload Change-Id: I1fa8402d318393de2e02f1e632ab78b6ec0768e8 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41391 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09payloads: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.*[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.*[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: I9f74ed19257bc4234465b8f912deff1b485173f9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41179 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-07payloads/external/Makefile.inc: Pass hardware IRQ option to SeaBIOS MakefileMichał Żygowski
The hardware IRQ option was not passed to SeaBIOS Makefile and resulted in HARDWARE_IRQ being permanently disabled regardless of Kconfig selection in coreboot. On platforms that need the hardware IRQ it caused hangs at boot menu or iPXE prompts. TEST=enter SeaBIOS boot menu on Libretrend LT1000 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iafcfd743177bbcd1ee23e227c74dd8268c4c23c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04libpayload/drivers/usb/xhci: Allow xHCI v1.2 in libpayloadDossym Nurmukhanov
The latest Intel FSP advertises xHCI v1.2 chipset support, so update libpayload to include that version. No critical changes were identified in review of the xHCI v1.2 spec, and booting from USB works with the included change as expected. BUG=b:155315876 TEST=booting from multiple USB sticks/hubs with the latest Intel FSP that advertises xHCI v1.2 Change-Id: I236fed9beef86ff5e1bf7962d882fdae5817a1ff Signed-off-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41039 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04payloads/external/GRUB2: Makefile: fix check for changed files againMichael Niewöhner
This fixes the missing closing brace introduced in CB:40953. Change-Id: I295c67ab8d7596bf54cc69d088ef1df906f58d5f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41036 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 21:28:39 +0000