summaryrefslogtreecommitdiff
path: root/src/Kconfig
AgeCommit message (Collapse)Author
2017-05-22Kconfig: Move and clean up CONFIG_VGANico Huber
Change-Id: I6e710b95cade0ea68f787f33c0070613d64b6da6 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-05-12commonlib: Move drivers/storage into commonlib/storageLee Leahy
Move drivers/storage into commonlib/storage to enable access by libpayload and indirectly by payloads. * Remove SD/MMC specific include files from include/device * Remove files from drivers/storage * Add SD/MMC specific include files to commonlib/include * Add files to commonlib/storage * Fix header file references * Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver * Add Kconfig source for commonlib/storage * Rename *DEVICE* to *COMMONLIB* * Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE* TEST=Build and run on Galileo Gen2 Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-05cr50: check if the new image needs to be enabled and act on itVadim Bendebury
The AP sends the Cr50 a request to enable the new firmware image. If the new Cr50 image was found and enabled, the AP expects the Cr50 to reset the device in 1 second. While waiting for the Cr50 to reset, the AP logs a newly defined event and optionally shuts down the system. By default the x86 systems power off as shutting those systems down is not board specific. BRANCH=gru,reef BUG=b:35580805 TEST=built a reef image, observed that in case cr50 image is updated, after the next reboot the AP stops booting before loading depthcharge, reports upcoming reset and waits for it. Once the system is booted after that, the new event can be found in the log: localhost ~ # mosys eventlog list ... 7 | 2017-03-23 18:42:12 | Chrome OS Developer Mode 8 | 2017-03-23 18:42:13 | Unknown | 0xac 9 | 2017-03-23 18:42:21 | System boot | 46 ... Change-Id: I45fd6058c03f32ff8edccd56ca2aa5359d9b21b1 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-25include: Add xmalloc, xzmalloc and dma routinesLee Leahy
Add a Kconfig value to indicate coreboot builds. Add prototypes and definitions for: * dma_coherent * dma_malloc * xmalloc * xzmalloc Move prototype for memset into stdlib.h from string.h to eliminate build breaks. TEST=Build and test on Galileo Gen2 Change-Id: Ib2eb2ca143b0538bdd1863e628af4c1948bc0f8c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/19207 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-24Kconfig: provide MAINBOARD_HAS_TPM_CR50 optionAaron Durbin
The CR50 TPM can do both SPI and I2C communication. However, there's situations where policy needs to be applied for CR50 generically regardless of the I/O transport. Therefore add MAINBOARD_HAS_TPM_CR50 to encompass that. Additionally, once the mainboard has selected CR50 TPM automatically select MAINBOARD_HAS_TPM2 since CR50 TPM is TPM 2.0. Change-Id: I878f9b9dc99cfb0252d6fef7fc020fa3d391fcec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19370 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-14util/blobtool & sconfig: Update GENPARSER Kconfig questionMartin Roth
blobtool uses the same sort of update mechanism for the .l & .y files, so update the SCONFIG_GENPARSER Kconfig question to encompass both utilities. - Change the name to UTIL_GENPARSER, and update the help text. - Update sconfig's makefile. - Add the check to blobtool's makefile. - Update the makefiles to check for y, not defined. Change-Id: I6215791c9a019bce37d4a150b65d1fdbb9073156 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19229 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-14GDB_WAIT: Clarify Kconfig descriptionDenis 'GNUtoo' Carikli
The user has to know in which stage gdb is waiting to be able to use symbolic debugging. Change-Id: Ia992e7a2077b92c45546ae56c5fb648775f8f63b Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/12709 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-14src/Kconfig: Move bootblock behavior to arch/x86 as TODO suggestedMartin Roth
The four options are only used in X86: - BOOTBLOCK_SIMPLE - BOOTBLOCK_NORMAL - BOOTBLOCK_SOURCE - SKIP_MAX_REBOOT_CNT_CLEAR Move them all into src/arch/x86/Kconfig - this puts them in the chipset menu instead of general setup. Verified that this makes no significant changes to any config file. Change-Id: I2798ef67a8c6aed5afac34322be15fdf0c794059 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17909 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2017-02-14src/Kconfig: Remove 'default n' statements from early in KconfigMartin Roth
For boolean types, 'n' is the default default value - it doesn't NEED to be set. If it IS set, it prevents a later default from being set. So by removing the 'default n' statements from the early symbols, they can be overridden other places in the tree. Verified that this makes no significant changes to any config file. Change-Id: I1b5b66bd8a3df8154a348b5272c56c88829b3ab4 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17908 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-02-10device/dram: use global DIMM_SPD_SIZE Kconfig variablePatrick Georgi
Also make sure that no board changes behaviour because of that by adding a static assert. TEST=abuild over all builds still succeeds (where it doesn't if DIMM_SPD_SIZE isn't set to 128 bytes for boards that use the device/dram code). Change-Id: Iddb962b16857ee859ddcf1b52d18da9b3be56449 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/18254 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-06src/Kconfig: Move options with no prompt towards the end of the fileMartin Roth
Options with no prompt can go anywhere in the tree with the same dependencies and they have the same effect. Moving them lower in the tree allows the default values to be overridden by other Kconfig files. This patch just moves options with default values that aren't 'n'. The 'n' options are just removed in the next patch, since they aren't needed. Verified that this makes no significant changes to any config file. Change-Id: I46175756b937a241edba87dbf70ce1be851fa89d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17907 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-02-04src/Kconfig: Move early defaults to the end of the fileMartin Roth
For Kconfig options that we might want to override the default, move the fallback default to the bottom of the file. This allows the default to be set anywhere else, without requiring a select. This is especially important for non-boolean symbols, which can't have their defaults overridden in the Kconfig. Those can only be updated in a saved config file. Verified that this makes no significant changes to any config file. Change-Id: I66034f356428f4ccd191d7420baf888edd5216dc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17906 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-02-04Only show CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM option when implementedArthur Heymans
This also selects RELOCATABLE_RAMSTAGE and CACHE_RELOCATABLE_RAMSTAGE_OUTSIDE_CBMEM by default on Haswell. Change-Id: I50b9ee8bbfb3611fccfd1cfde58c6c9f46b189ca Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18232 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-11ACPI S3: Flip ACPI_HUGE_LOWMEM_BACKUP defaultKyösti Mälkki
Except fo nehalem, K8, f10 and f15 (non-AGESA) romstage ramstack is placed in CBMEM and ramstage loader takes care of tiny backup. Change-Id: I8477944f48ed2493d0a5e436a4088eb9fc3d59c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17358 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30mb/intel/kblrvp: Add Variant board support for KBLRVPBarnali Sarkar
Add support of Variant board model for existing intel/kblrvp, since there might be more RVP board supports under intel/kblrvp. Existing is for KBL RVP3 board. BUG=none BRANCH=none TEST=Built and boot Kaby Lake RVP3 Change-Id: I041a07a273dbb77e422d48591f06b5f1011cd9f7 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17630 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-30lib: Add library to handle SPD data in CBFS or DIMMNaresh G Solanki
Add library to: 1. add spd.bin in cbfs, generated from mainboard/spd/*.spd.hex files. 2. runtime get spd data with spd index as input. 3. fetch spd over smbus using early smbus functions. Change-Id: I44fe1cdb883dd1037484d4bb5c87d2d4f9862bf8 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17434 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-11-29Hook up libhwbase in ramstageNico Huber
It's hidden behind a configuration option `CONFIG_RAMSTAGE_LIBHWBASE`. This also adds some glue code to use the coreboot console for debug output and our monotonic timer framework as timer backend. v2: Also update 3rdparty/libhwbase to the latest master commit. Change-Id: I8e8d50271b46aac1141f95ab55ad323ac0889a8d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16951 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-22Remove explicit select MMCONF_SUPPORTKyösti Mälkki
Make MMCONF_SUPPORT selected with MMCONF_SUPPORT_DEFAULT. Platforms that remain to have explicit MMCONF_SUPPORT are ones that should be converted. Change-Id: Iba8824f46842607fb1508aa7d057f8cbf1cd6397 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17527 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-09ACPI S3: Remove HIGH_MEMORY_SAVE where possibleKyösti Mälkki
Add implementation to use actual requirements of ramstage size for S3 resume backup in CBMEM. The backup covers complete pages of 4 KiB. Only the required amount of low memory is backed up when ACPI_TINY_LOWMEM_BACKUP is selected for the platform. Enable this option for AGESA and binaryPI, other platforms (without RELOCATABLE_RAMSTAGE) currently keep their romstage ramstack in low memory for s3 resume path. Change-Id: Ide7ce013f3727c2928cdb00fbcc7e7e84e859ff1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15255 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-11-06Add option to use Ada code in ramstageNico Huber
If selected, libgnat will be linked into ramstage. And, to support Ada package intializations, we have to call ramstage_adainit(). Change-Id: I11417db21f16bf3007739a097d63fd592344bce3 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16944 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-29Add option to build Ada debugging codeNico Huber
Ada knows a pragma `Debug` that is used to exclude procedure calls from a release build. The new option `DEBUG_ADA_CODE` enables those procedure calls. Change-Id: Id5298e5819606c3d1cf2a2a1cd4f1d5d1227aa4f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/16943 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-09-22Build system: Remove IASL_WARNINGS_ARE_ERRORS optionMartin Roth
All systems are building with IASL warnings as errors enabled. Remove the option to disable it. Remove the notification at the end of the build. Change-Id: I5c6218c182fdf173b4026fd010d939a5fa36040e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16606 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-06Kconfig: Relocate DEVICETREE symbolMarshall Dawson
Place config DEVICETREE after the sourced mainboard Kconfig. This gives the mainboard the opportunity to set a unique default value. Change-Id: Id877e1e8f555334a99b6c0ee1782d06a4a2b7a04 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/16493 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-23arch/riscv: Print the page table structure after constructionJonathan Neuschäfer
A new Kconfig option, DEBUG_PRINT_PAGE_TABLES, is added to control this behaviour. It is currently only available on RISC-V, but other architectures can use it, too, should the need arise. Change-Id: I52a863d8bc814ab3ed3a1f141d0a77edc6e4044d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16015 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19Kconfig: introduce writable boot device notionAaron Durbin
Indicate to the build system that a platform provides support for a writable boot device. The following will provide the necessary support: COMMON_CBFS_SPI_WRAPPER users soc/intel/apollolake soc/intel/baytrail soc/intel/braswell soc/intel/broadwell soc/intel/skylake The SPI_FLASH option is auto-selected if the platform provides write supoprt for the boot device and SPI flash is the boot device. Other platforms may provide similar support, but they do that in a device specific manner such as selecting SPI_FLASH explicitly. This provides clearance against build failures where chipsets don't provide SPI API implementations even though the platform may use a SPI flash to boot. BUG=chrome-os-partner:56151 Change-Id: If78160f231c8312a313f9b9753607d044345d274 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16211 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19drivers/spi: move cbfs_spi.c locationAaron Durbin
The common boot device spi implementation is very much specific to SPI flash. As such it should be moved into that subdirectory. It's still a high-level option but it correctly depends on BOOT_DEVICE_SPI_FLASH. Additionally that allows the auto-selection of SPI_FLASH by a platform selecting COMMON_CBFS_SPI_WRAPPER which allows for culling of SPI_FLASH selections everywhere. BUG=chrome-os-partner:56151 Change-Id: Ia2ccfdc9e1a4348cd91b381f9712d8853b7d2a79 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16212 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19Kconfig: separate memory mapped boot device from SPIAaron Durbin
Make the indication of the boot device being memory mapped separate from SPI. However, retain the same defaults that previously existed. BUG=chrome-os-partner:56151 Change-Id: I06f138078c47a1e4b4b3edbdbf662f171e11c9d4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16228 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-18Kconfig: lay groundwork for not assuming SPI flash boot deviceAaron Durbin
Almost all boards and chipsets within the codebase assume or use SPI flash as the boot device. Therefore, provide an option for the boards/chipsets which don't currently support SPI flash as the boot device. The default is to assume SPI flash is the boot device unless otherwise instructed. This falls in line with the current assumptions, but it also allows one to differentiate a platform desiring SPI flash support while it not being the actual boot device. One thing to note is that while google/daisy does boot with SPI flash part no SPI API interfaces were ever implemented. Therefore, mark that board as not having a SPI boot device. BUG=chrome-os-partner:56151 Change-Id: Id4e0b4ec5e440e41421fbb6d0ca2be4185b62a6e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16191 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-15Revert "Kconfig: separate memory mapped boot device from SPI"Aaron Durbin
This reverts commit a83bbf58541cf41ea7a97dedbc8c02dffa59e86d. This was submitted out of order. Change-Id: Ic5a28faf94c1f1901a72e46343722eb4224c5086 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16226 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-15Kconfig: remove unused MULTIPLE_CBFS_INSTANCES optionAaron Durbin
This option is no longer used in the code base. Remove it. BUG=chrome-os-partner:56151 Change-Id: Ia73cce7546c9839518c9e931b03c50856abc2018 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16186 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-15Kconfig: separate memory mapped boot device from SPIAaron Durbin
Make the indication of the boot device being memory mapped separate from SPI. However, retain the same defaults that previously existed. BUG=chrome-os-partner:56151 Change-Id: Ibdd7c8754f9bf560a878136b1f55238e2c2549d3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16193 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09superio/*: Relocate Kconfig to chip folder.Omar Pakker
This moves the Kconfig from the Super I/O manufacturer folder to the chip folder instead. This makes new chip commits self-contained unit as edits to the central Kconfig file are no longer required. Change-Id: I7aee07919f2ae9204850c669e0ed3cb17d4de8cd Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/15973 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2016-08-08sconfig: pass in devicetree filenameMartin Roth
Instead of forcing the hardcoded 'devicetree.cb' filename under the mainboard directory, this allows mainboards to select a filename for the devicetree file. This allows mainboard variants that need to use different devicetree files to live under the same directory. Change-Id: I761e676ba5d5f70d1fb86656b528f63db169fcef Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12529 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-31src/Kconfig: Capitalize ROMElyes HAOUAS
Change-Id: I6c090f5adcc46b4e069a156c6b506a76c0aa7cb5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-28bootmode: Get rid of CONFIG_BOOTMODE_STRAPSFurquan Shaikh
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and developer mode check functions to vboot. Thus, get rid of the BOOTMODE_STRAPS option which controlled these functions under src/lib. BUG=chrome-os-partner:55639 Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use of verified boot library without having to stick to CHROMEOS. BUG=chrome-os-partner:55639 Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15867 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-26src/lib: Enable display of cbmem during romstage and postcarLee Leahy
Enable the display of cbmem during romstage and postcar. Add a Kconfig value to prevent coreboot images from increasing in size when this feature is not in use. TEST=Build and run on Galileo Gen2 Change-Id: Ib70ad517ebf7d37a7f46ba503b4432c7c04d7ded Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15842 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-10Romstage spinlocks require EARLY_CBMEM_INITKyösti Mälkki
The lock stores need to migrate from CAR to CBMEM. Change-Id: I3cffd14bdfc57d5588d0f24afe00e0f9891bfe5a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15588 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-01Kconfig: Show DEBUG_BOOT_STATE in the Debug menuJonathan Neuschäfer
Change-Id: I22441ee0d19aa1b2e2f40278ce30092c86e0adc9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15522 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-23kconfig: allow various tpm type and interface permutationsVadim Bendebury
Until now it was assumed that all TPM devices were of the same type (TCG 1.2 spec compliant) and x86 based boards had LPC connected TPMs and all other boards had I2C connected TPMs. With the advent of TPM2 specification there is a need to be able to configure different combinations of TPM types (TPM or TPM2) and interfaces (LPC, I2C and SPI). This patch allows to do it. Picking Chrome OS still assumes that the board has a TPM device, but adding MAINBOARD_HAS_TPM2 to the board's Kconfig will trigger including of TPM2 instead. MAINBOARD_HAS_LPC_TPM forces the interface to be set to LPC, adding SPI_TPM to the board config switches interface choice to SPI, and if neither of the two is defined, the interface is assumed to be I2C. BRANCH=none BUG=chrome-os-partner:50645 TEST=verified that none of the generated board configurations change as a result of this patch. With the rest of the stack in place it is possible to configure different combinations of TPM types and interfaces for ARM and x86 boards. Change-Id: I24f2e3ee63636566bf2a867c51ed80a622672f07 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 5a25c1070560cd2734519f87dfbf401c135088d1 Original-Change-Id: I659e9301a4a4fe065ca6537ef1fa824a08d36321 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/349850 Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/15294 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-06-17Define RAMTOP for x86 onlyKyösti Mälkki
This Kconfig is deprecated, new platforms need to locate ramstage stack in CBMEM instead. Change-Id: I20ece297302321337cc2ce17fdef0c55242a4fc3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15189 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-06-03Add Board Checklist SupportLee Leahy
Build the <board>_checklist.html file which contains a checklist table for each stage of coreboot. This processing builds a set of implemented (done) routines which are marked green in the table. The remaining required routines (work-to-do) are marked red in the table and the optional routines are marked yellow in the table. The table heading for each stage contains a completion percentage in terms of count of routines (done .vs. required). Add some Kconfig values: * CREATE_BOARD_CHECKLIST - When selected creates the checklist file * MAKE_CHECKLIST_PUBLIC - Copies the checklist file into the Documenation directory * CHECKLIST_DATA_FILE_LOCATION - Location of the checklist data files: * <stage>_complete.dat - Lists all of the weak routines * <stage>_optional.dat - Lists weak routines which may be optionally implemented TEST=Build with Galileo Gen2. Change-Id: Ie056f8bb6d45ff7f3bc6390b5630b5063f54c527 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15011 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-02cbfs: Use NO_XIP_EARLY_STAGES to decide if stage is XIPFurquan Shaikh
Modern platforms like Apollolake do not use XIP for early stages. In such cases, cbfs_prog_stage_load should check for NO_XIP_EARLY_STAGES instead of relying on ARCH_X86 to decide if a stage is XIP. Change-Id: I1729ce82b5f678ce8c37256090fcf353cc22b1ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15045 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-19src/Kconfig: Move acpi Kconfig below chipset KconfigsMartin Roth
The src/acpi/Kconfig was being sourced close to the top of the Kconfig tree, which doesn't allow it to be overridden by mainboards or chipsets. Moving it lower in the tree allows for the defaults to be overridden. Change-Id: I0b100f5535c5f383e8c6db74d0024c5ff2e8c08d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14878 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-11lib: remove FLASHMAP_OFFSET config variableAaron Durbin
The FLASHMAP_OFFSET config variable is used in lib/fmap.c, however the fmdtool creates a fmap_config.h with a FMAP_OFFSET #define. Those 2 values are not consistent. Therefore, remove the Kconfig variable and defer to the #define generated by fmdtool. Change-Id: Ib4ecbc429e142b3e250106eea59fea1caa222917 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14765 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-09lib/prog_loaders: Allow platforms to skip stage cacheFurquan Shaikh
Before multi-CBFS support was added, x86 platforms cached their ramstage in TSEG so that it could be re-used on the resume path. However, more resources/assets are being put in cbfs that are utilized during ramstage. Just caching ramstage does not mean that correct cbfs region is used for all the data. Thus, provide an option to allow platforms to skip caching any component for resume. Change-Id: I0e957a6b859cc7d700aaff67209a17c6558be5de Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14636 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-05-09xip: Do not pass --xip for early stages if CAR supports code executionFurquan Shaikh
On modern x86 platforms like apollolake, pre-RAM stages verstage and romstage run within the cache-as-ram region. Thus, we do not need to pass in the --xip parameter to cbfstool while adding these stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is default false for all x86 platforms. Apollolake selects this option since it supports code execution with CAR. Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/14623 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-02lib/coreboot_table: use the architecture dependent table sizeAaron Durbin
Utilize the architecture dependent coreboot table size value from <arch/cbconfig.h> Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14455 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)