summaryrefslogtreecommitdiff
path: root/src/Kconfig
AgeCommit message (Collapse)Author
2013-12-29AMD K8 (rev-F): Always have RAMINIT_SYSINFOKyösti Mälkki
K8 Rev F raminit code cannot be built without RAMINIT_SYSINFO, so have the option enabled together with K8_REV_F_SUPPORT. Also move the option under AMD K8. Change-Id: I91fa0b4ae7e3e54fbcb4a4f91eb043956cd0fb60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4582 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-19Add GRUB2 payload to build systemVladimir Serbinenko
Since a long time GRUB 2 is a viable payload alternative to SeaBIOS and FILO. So make it easy for coreboot users to use GRUB 2 as a payload by integrating it into coreboot’s build system, so it can be selected in Kconfig. As the last GRUB 2 release 2.00 is too old and has several bugs when used as a coreboot payload only allow to build GRUB 2 master until a new GRUB release is done. The downside is, that accidental breakage in GRUB’s upstream does not affect coreboot users. Currently the GRUB 2 payload is built with the default modules which results in an uncompressed size of around 730 kB. Compressed it has a size of 340 kB, so it should be useable with 512 kB flash ROMs. Tested with QEMU. Change-Id: Ie75d5a2cb230390cd5a063d5f6a5d5e3fab6b354 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4058 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-10-15Have option of timestamps, CBMEM console and usbdebug for most boardsKyösti Mälkki
As boards without EARLY_CBMEM_INIT do not initialize CBMEM in romstage, and have no CAR migration, these features are available for ramstage only. Change-Id: Ic3f77ccdedd4e71ba693619c02c9b98b328a0882 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3970 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
This reverts commit de1fe7f655c549e8dce5b34218221890fa5ccc34. While things appeared to work, there were actually invalid references to CAR storage after CAR was torn down on boards without EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be restricted to boards that handle CAR migration properly. Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always have early initialisationKyösti Mälkki
Assume EARLY_CBMEM_INIT=y everywhere and remove option from Kconfig. If romstage does not make the cbmem_initialize() call, features like COLLECT_TIMESTAMPS and early CBMEM_CONSOLE will execute during romstage, but that data will get lost as no CAR migration is executed. Change-Id: I5615645ed0f5fd78fbc372cf5c3da71a3134dd85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3917 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-17Fix whitespace leaked into treeKyösti Mälkki
Clean whitespace errors that have gotten past lint-stable-003-whitespace and gerrit review. Change-Id: Id76fc68e9d32d1b2b672d519b75cdc80cc4f1ad9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3920 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-08-31Add Kconfig options for Linux as payloadPatrick Georgi
These allow to define a kernel image, initrd and command line. Change-Id: I40155b812728a176b6d15871e1e6c96e4ad693c8 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/3893 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-08-31Remove NRV2B compression supportPatrick Georgi
It wasn't even hooked up to the build system anymore. Change-Id: I4b962ffd945b39451e19da3ec2f7b8e0eecf2e53 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/3892 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-08-16Fix lint-stable targetPatrick Georgi
SEABIOS_PS2_TIMEOUT needs a default, otherwise the "allyesconfig" target hangs in an endless loop. The given default is correctly overridden by the (currently sole) user, the lenovo/x60 target. Change-Id: I3f5e347c29ccbb4d711a489d067b6c909f030bd0 Reported-by: Kyösti Mälkki Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3874 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2013-08-15payload/SeaBIOS: Add SEABIOS_PS2_TIMEOUT Kconfig variablePeter Stuge
This allows mainboards to preconfigure a ps2-keyboard-spinup timeout when SeaBIOS is chosen as the payload. The Kconfig option can be changed manually if CONFIG_EXPERT is set. Change-Id: I5732b18ef04f4bdef6236f35039656ad02011aec Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3734 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-08-10usbdebug: Add option for verbose logging of connectionKyösti Mälkki
Add option to log changes in USB 2.0 EHCI debug port connection. For romstage move usbdebug as the last initialised console so one actually can see these messages. Init order of consoles in ramstage is undetermined and unchanged. Change-Id: I3aceec8a93064bd952886839569e9f5beb6c5720 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3387 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-14Add a HAVE_ARCH_MEMMOVE option to allow overriding memmove.Gabe Black
Change-Id: I4b6a57e7d8e7e685c609b1d85368585b9dd197dc Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3761 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-11Move the HAVE_ARCH_* config options from src/arch/x86 to src/.Gabe Black
The options that keep track of whether there are arch versions of the standard string functions shouldn't be in the arch/x86 directory since they apply to all architectures. Move them into the higher level, shared Kconfig defaulting to off. Then, in each applicable arch (currently all of them) they can be selected to on. Change-Id: I7ea64a583230fdc28773f17fd7cc23e0f0a5f3d6 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3760 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04Yabel : Add tracing option needed by i915tool.Denis 'GNUtoo' Carikli
This patch was made by listenning to what Ron Minnich told me to do on #coreboot IRC channel on Freenode with my adaptations on top. i915tool is at https://code.google.com/p/i915tool/ , the one in coreboot is outdated. Change-Id: I13cd684f4c290114836fbd7babd461153e8d6124 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3277 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-23Kconfig: Remove duplicate entry for `USE_OPTION_TABLE`Paul Menzel
The following commit commit eb50c7d922e91f0247b3705eccb2d2eec638c277 Author: Edwin Beasant <edwin_beasant@virtensys.com> Date: Tue Jul 6 21:05:04 2010 +0000 Re-integrate "USE_OPTION_TABLE" code. added a duplicate entry `config USE_OPTION_TABLE`. Remove it again. Change-Id: I3ff64c360bad531439e74fa1b25a06c4a447a33f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3165 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-20Drop llshellStefan Reinauer
This feature has not been used and was never fully integrated. In the progress of cleaning up coreboot, let's drop it. Change-Id: Ib40acdba30aef00a4a162f2b1009bf8b7db58bbb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3251 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14x86: add thread supportAaron Durbin
Thread support is added for the x86 architecture. Both the local apic and the tsc udelay() functions have a call to thread_yield_microseconds() so as to provide an opportunity to run pending threads. Change-Id: Ie39b9eb565eb189676c06645bdf2a8720fe0636a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3207 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14coreboot: add thread cooperative multitaskingAaron Durbin
The cooperative multitasking support allows the boot state machine to be ran cooperatively with other threads of work. The main thread still continues to run the boot state machine (src/lib/hardwaremain.c). All callbacks from the state machine are still ran synchronously from within the main thread's context. Without any other code added the only change to the boot sequence when cooperative multitasking is enabled is the queueing of an idlle thread. The idle thread is responsible for ensuring progress is made by calling timer callbacks. The main thread can yield to any other threads in the system. That means that anyone that spins up a thread must ensure no shared resources are used from 2 or more execution contexts. The support is originally intentioned to allow for long work itesm with busy loops to occur in parallel during a boot. Note that the intention on when to yield a thread will be on calls to udelay(). Change-Id: Ia4d67a38665b12ce2643474843a93babd8a40c77 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3206 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08Drop CONFIG_AP_CODE_IN_CARStefan Reinauer
This option has not been enabled on any board and was considered obsolete last time it was touched. If we need the functionality, let's fix this in a generic way instead of a K8 specific way. This was mostly a speedup hack back in the day. Change-Id: Ib1ca248c56a7f6e9d0c986c35d131d5f444de0d8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-03Kconfig: Capitalize CBMEM in description of `EARLY_CBMEM_INIT`Paul Menzel
Capitalizing CBMEM seems to be the official spelling as can be seen in the descriptions around the `EARLY_CBMEM_INIT` Kconfig option. Change-Id: I046a678c3b04ef7e681de46aa137cedc405d546f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3143 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-01coreboot: add timer queue implementationAaron Durbin
A timer queue provides the mechanism for calling functions in the future by way of a callback. It utilizes the MONOTONIC_TIMER to track time through the boot. The implementation is a min-heap for keeping track of the next-to-expire callback. Change-Id: Ia56bab8444cd6177b051752342f53b53d5f6afc1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3158 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01coreboot: introduce monotonic timer APIAaron Durbin
The notion of a monotonic timer is introduced. Along with it are helper functions and other types for comparing times. This is just the framework where it is the responsibility of the chipset/board to provide the implementation of timer_monotonic_get(). The reason structs are used instead of native types is to allow for future changes to the data structure without chaning all the call sites. Change-Id: Ie56b9ab9dedb0da69dea86ef87ca744004eb1ae3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3152 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-23dynamic cbmem: fix memconsole and timestampsAaron Durbin
There are assumptions that COLLECT_TIMESTAMPS and CONSOLE_CBMEM rely on EARLY_CBMEM_INIT. This isn't true in the face of DYNAMIC_CBMEM as it provides the same properties as EARLY_CBMEM_INIT. Therefore, allow one to select COLLECT_TIMESTAMPS and CONSOLE_CBMEM when DYNAMIC_CBMEM is selected. Lastly, don't hard code the cbmem implementation when COLLECT_TIMESTAMPS is selected. Change-Id: I053ebb385ad54a90a202da9d70b9d87ecc963656 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2895 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-22coreboot: dynamic cbmem requirementAaron Durbin
Dynamic cbmem is now a requirement for relocatable ramstage. This patch replaces the reserve_* fields in the romstage_handoff structure by using the dynamic cbmem library. The haswell code is not moved over in this commit, but it should be safe because there is a hard requirement for DYNAMIC_CBMEM when using a reloctable ramstage. Change-Id: I59ab4552c3ae8c2c3982df458cd81a4a9b712cc2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2849 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-21cbmem: dynamic cbmem supportAaron Durbin
This patch adds a parallel implementation of cbmem that supports dynamic sizing. The original implementation relied on reserving a fixed-size block of memory for adding cbmem entries. In order to allow for more flexibility for adding cbmem allocations the dynamic cbmem infrastructure was developed as an alternative to the fixed block approach. Also, the amount of memory to reserve for cbmem allocations does not need to be known prior to the first allocation. The dynamic cbmem code implements the same API as the existing cbmem code except for cbmem_init() and cbmem_reinit(). The add and find routines behave the same way. The dynamic cbmem infrastructure uses a top down allocator that starts allocating from a board/chipset defined function cbmem_top(). A root pointer lives just below cbmem_top(). In turn that pointer points to the root block which contains the entries for all the large alloctations. The corresponding block for each large allocation falls just below the previous entry. It should be noted that this implementation rounds all allocations up to a 4096 byte granularity. Though a packing allocator could be written for small allocations it was deemed OK to just fragment the memory as there shouldn't be that many small allocations. The result is less code with a tradeoff of some wasted memory. +----------------------+ <- cbmem_top() | +----| root pointer | | | +----------------------+ | | | |--------+ | +--->| root block |-----+ | | +----------------------+ | | | | | | | | | | | | | | alloc N |<----+ | | +----------------------+ | | | | | | | | | \|/ | alloc N + 1 |<-------+ v +----------------------+ In addition to preserving the previous cbmem API, the dynamic cbmem API allows for removing blocks from cbmem. This allows for the boot process to allocate memory that can be discarded after it's been used for performing more complex boot tasks in romstage. In order to plumb this support in there were some issues to work around regarding writing of coreboot tables. There were a few assumptions to how cbmem was layed out which dictated some ifdef guarding and other runtime checks so as not to incorrectly tag the e820 and coreboot memory tables. The example shown below is using dynamic cbmem infrastructure. The reserved memory for cbmem is less than 512KiB. coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000002ffff: RAM 2. 0000000000030000-000000000003ffff: RESERVED 3. 0000000000040000-000000000009ffff: RAM 4. 00000000000a0000-00000000000fffff: RESERVED 5. 0000000000100000-0000000000efffff: RAM 6. 0000000000f00000-0000000000ffffff: RESERVED 7. 0000000001000000-000000007bf80fff: RAM 8. 000000007bf81000-000000007bffffff: CONFIGURATION TABLES 9. 000000007c000000-000000007e9fffff: RESERVED 10. 00000000f0000000-00000000f3ffffff: RESERVED 11. 00000000fed10000-00000000fed19fff: RESERVED 12. 00000000fed84000-00000000fed84fff: RESERVED 13. 0000000100000000-00000001005fffff: RAM Wrote coreboot table at: 7bf81000, 0x39c bytes, checksum f5bf coreboot table: 948 bytes. CBMEM ROOT 0. 7bfff000 00001000 MRC DATA 1. 7bffe000 00001000 ROMSTAGE 2. 7bffd000 00001000 TIME STAMP 3. 7bffc000 00001000 ROMSTG STCK 4. 7bff7000 00005000 CONSOLE 5. 7bfe7000 00010000 VBOOT 6. 7bfe6000 00001000 RAMSTAGE 7. 7bf98000 0004e000 GDT 8. 7bf97000 00001000 ACPI 9. 7bf8b000 0000c000 ACPI GNVS 10. 7bf8a000 00001000 SMBIOS 11. 7bf89000 00001000 COREBOOT 12. 7bf81000 00008000 And the corresponding e820 entries: BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 BIOS-e820: [mem 0x0000000000001000-0x000000000002ffff] usable BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved BIOS-e820: [mem 0x0000000001000000-0x000000007bf80fff] usable BIOS-e820: [mem 0x000000007bf81000-0x000000007bffffff] type 16 BIOS-e820: [mem 0x000000007c000000-0x000000007e9fffff] reserved BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable Change-Id: Ie3bca52211800a8652a77ca684140cfc9b3b9a6b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2848 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-21coreboot: introduce CONFIG_RELOCATABLE_RAMSTAGEAaron Durbin
This patch adds an option to build the ramstage as a reloctable binary. It uses the rmodule library for the relocation. The main changes consist of the following: 1. The ramstage is loaded just under the cmbem space. 2. Payloads cannot be loaded over where ramstage is loaded. If a payload is attempted to load where the relocatable ramstage resides the load is aborted. 3. The memory occupied by the ramstage is reserved from the OS's usage using the romstage_handoff structure stored in cbmem. This region is communicated to ramstage by an CBMEM_ID_ROMSTAGE_INFO entry in cbmem. 4. There is no need to reserve cbmem space for the OS controlled memory for the resume path because the ramsage region has been reserved in #3. 5. Since no memory needs to be preserved in the wake path, the loading and begin of execution of a elf payload is straight forward. Change-Id: Ia66cf1be65c29fa25ca7bd9ea6c8f11d7eee05f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2792 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-03-19cbfs: alternative support for cbfs_load_payload()Aaron Durbin
In certain situations boot speed can be increased by providing an alternative implementation to cbfs_load_payload(). The ALT_CBFS_LOAD_PAYLOAD option allows for the mainboard or chipset to provide its own implementation. Booted baskingridge board with alternative and regular cbfs_load_payload(). Change-Id: I547ac9881a82bacbdb3bbdf38088dfcc22fd0c2c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2782 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-03-18lib: add rmodule supportAaron Durbin
A rmodule is short for relocation module. Relocaiton modules are standalone programs. These programs are linked at address 0 as a shared object with a special linker script that maintains the relocation entries for the object. These modules can then be embedded as a raw binary (objcopy -O binary) to be loaded at any location desired. Initially, the only arch support is for x86. All comments below apply to x86 specific properties. The intial user of this support would be for SMM handlers since those handlers sometimes need to be located at a dynamic address (e.g. TSEG region). The relocation entries are currently Elf32_Rel. They are 8 bytes large, and the entries are not necessarily in sorted order. An future optimization would be to have a tool convert the unsorted relocations into just sorted offsets. This would reduce the size of the blob produced after being processed. Essentialy, 8 bytes per relocation meta entry would reduce to 4 bytes. Change-Id: I2236dcb66e9d2b494ce2d1ae40777c62429057ef Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2692 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-04bump SeaBIOS to 1.7.2.1Idwer Vollering
Update coreboot to use SeaBIOS' tag rel-1.7.2.1 Change-Id: I01969407964a7cf64f7c4800b59c6aed845b24f9 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/2575 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-28CBMEM: always initialize early if the board supports itStefan Reinauer
This allows to drop some special cases in romstage.c Change-Id: I53fdfcd1bb6ec21a5280afa07a40e3f0cba11c5d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2551 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-02-28Drop CONFIG_WRITE_HIGH_TABLESStefan Reinauer
It's been on for all boards per default since several years now and the old code path probably doesn't even work anymore. Let's just have one consistent way of doing things. Change-Id: I58da7fe9b89a648d9a7165d37e0e35c88c06ac7e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2547 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-19build system: Retire REQUIRES_BLOBPatrick Georgi
REQUIRES_BLOB assumes that all blob files come from the 3rdparty directory, builds failed when all files were configured to point to other sources. This change modifies the blob mechanism so that cbfs-files can be tagged as "required" with some specification what is missing. If the configured files can't be found (wrong path, missing file), the build system returns a list of descriptions, then aborts. Change-Id: Icc128e3afcee8acf49bff9409b93af7769db3517 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2418 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marcj303@gmail.com>
2013-02-14ARMv7: drop multiboot supportStefan Reinauer
Multiboot is an x86 only thing. Drop support on ARM. Change-Id: I13fafa464a794206d5450b4a1f23a187967a8338 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2392 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-09DEBUG_CBFS should not depend on TPMDavid Hendricks
This seemed to have been introduced in fe422184. Change-Id: I4f9ecfbec42aa8c0bb8887675a3add8951645b98 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2327 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-08console: Revise serial console configuration names.Hung-Te Lin
The console drivers (especially serial drivers) in Kconfig were named in different styles. This change will rename configuration names to a better naming style. - EARLY_CONSOLE: Enable output in pre-ram stage. (Renamed from EARLY_SERIAL_CONSOLE because it also supports non-serial) - CONSOLE_SERIAL: Enable serial output console, from one of the serial drivers. (Renamed from SERIAL_CONSOLE because other non-serial drivers are named as CONSOLE_XXX like CONSOLE_CBMEM) - CONSOLE_SERIAL_UART: Device-specific UART driver. (Renamed from CONSOLE_SERIAL_NONSTANDARD_MEM because it may be not memory-mapped) - HAVE_UART_SPECIAL: A dependency for CONSOLE_SERIAL_UART. Verified to boot on x86/qemu and armv7/snow, and still seeing console messages in romstage for both platforms. Change-Id: I4bea3c8fea05bbb7d78df6bc22f82414ac66f973 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2299 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-05Don't add another Kconfig special case for TianoStefan Reinauer
We don't need a special Kconfig variable anymore because the FV _is_ the payload, unlike with the old tianocoreboot implementation. Change-Id: I349b5a95783e4146e3ab7f926871188cf2021935 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2284 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-02-04Hook up corebootPkg as Tianocore payloadPatrick Georgi
This unplugs Stefan's PIANO project. Change Tianocore payload configuration to use corebootPkg. As argument you have to give it the COREBOOT.FD generated by the Tianocore build system. It automatically determines base address and entry point. Compression setting is honored (ie. no compression if you don't want), but corebootPkg currently assumes that coreboot is doing it. Loading a 6MB payload into CBFS without compression will fail more often than not. Change-Id: If9c64c9adb4a846a677c8af40f149ce697059ee6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2280 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-01-30Project PIANO aka tianocorebootStefan Reinauer
This is a Tiano Core loader payload based on libpayload. It will load a Tiano Core DXE core from an UEFI firmware volume stored in CBFS. Currently Tiano Core dies because it does not find all the UEFI services it needs: coreboot-4.0-3316-gc5c9ff8-dirty Mon Jan 28 15:37:12 PST 2013 starting... [..] Tiano Core Loader v1.0 Copyright (C) 2013 Google Inc. All rights reserved. Memory Map (5 entries): 1. 0000000000000000 - 0000000000000fff [10] 2. 0000000000001000 - 000000000009ffff [01] 3. 00000000000c0000 - 0000000003ebffff [01] 4. 0000000003ec0000 - 0000000003ffffff [10] 5. 00000000ff800000 - 00000000ffffffff [02] DXE code: 03e80000 DXE stack: 03e60000 HOB list: 03d5c000 Found UEFI firmware volume. GUID: 8c8ce578-8a3d-4f1c-9935-896185c32dd3 length: 0x0000000000260000 Found DXE core at 0xffc14e0c Section 0: .text size=000158a0 rva=00000240 in file=000158a0/00000240 flags=60000020 Section 1: .data size=00006820 rva=00015ae0 in file=00006820/00015ae0 flags=c0000040 Section 2: .reloc size=000010a0 rva=0001c300 in file=000010a0/0001c300 flags=42000040 Jumping to DXE core at 0x3e80000 InstallProtocolInterface: 5B1B31A1-9562-11D2-8E3F-00A0C969723B 3E96708 HOBLIST address in DXE = 0x3E56010 Memory Allocation 0x00000003 0x3E80000 - 0x3EBFFFF FV Hob 0xFFC14D78 - 0xFFE74D77 InstallProtocolInterface: D8117CFE-94A6-11D4-9A3A-0090273FC14D 3E95EA0 InstallProtocolInterface: EE4E5898-3914-4259-9D6E-DC7BD79403CF 3E9630C Security Arch Protocol not present!! CPU Arch Protocol not present!! Metronome Arch Protocol not present!! Timer Arch Protocol not present!! Bds Arch Protocol not present!! Watchdog Timer Arch Protocol not present!! Runtime Arch Protocol not present!! Variable Arch Protocol not present!! Variable Write Arch Protocol not present!! Capsule Arch Protocol not present!! Monotonic Counter Arch Protocol not present!! Reset Arch Protocol not present!! Real Time Clock Arch Protocol not present!! ASSERT_EFI_ERROR (Status = Not Found) ASSERT /home/reinauer/svn/Tiano/edk2/MdeModulePkg/Core/Dxe/DxeMain/DxeMain.c(461): !EFI_ERROR (Status) Change-Id: I14068e9a28ff67ab1bf03105d56dab2e8be7b230 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2154 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-01-12Implement GCC code coverage analysisStefan Reinauer
In order to provide some insight on what code is executed during coreboot's run time and how well our test scenarios work, this adds code coverage support to coreboot's ram stage. This should be easily adaptable for payloads, and maybe even romstage. See http://gcc.gnu.org/onlinedocs/gcc/Gcov.html for more information. To instrument coreboot, select CONFIG_COVERAGE ("Code coverage support") in Kconfig, and recompile coreboot. coreboot will then store its code coverage information into CBMEM, if possible. Then, run "cbmem -CV" as root on the target system running the instrumented coreboot binary. This will create a whole bunch of .gcda files that contain coverage information. Tar them up, copy them to your build system machine, and untar them. Then you can use your favorite coverage utility (gcov, lcov, ...) to visualize code coverage. For a sneak peak of what will expect you, please take a look at http://www.coreboot.org/~stepan/coreboot-coverage/ Change-Id: Ib287d8309878a1f5c4be770c38b1bc0bb3aa6ec7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2052 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-12Fix UART8250 console prototypesStefan Reinauer
and disable IO mapped UARTs on ARMV7 per default Change-Id: I712c4677cbc8519323970556718f9bb6327d83c8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2021 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-12-06Drop ARCH_ARM in favor of ARCH_ARMV7Stefan Reinauer
The ARM architecture is really many architectures, and most of them need their own toolchain. After discussing with Ron and David, we decided that we're going to call the architecture of our ARM board armv7.. This patch cleans out the remainders of ARCH_ARM in the tree and moves on to consistent ARMv7 naming. As of now, we only support little endian ARMv7 CPUs. We can fix that for big endian if/when it comes our way. Change-Id: Id70c7ef615f600e4d09961d811e7ac974fce4811 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1968 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-30Rename devices -> deviceStefan Reinauer
to match src/include/device Change-Id: I5d0e5b4361c34881a3b81347aac48738cb5b9af0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1960 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2012-11-30Create a a new configuration variable for PCIRonald G. Minnich
Not all architectures have PCI. This new config variable allows control of whether PCI support is configued in. It is selected for ARCH_X86. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Change-Id: Ic5fe777b14fd6a16ba605ada1e22acf3e8a2c783 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/1947 Tested-by: build bot (Jenkins)
2012-11-30Add dummy Kconfig options for armv7David Hendricks
This adds a dummy config for ARMV7 for developing various follow-up patches which rely on ARCH_ARMV7. Change-Id: Id913054d916f41607d10ebc02aaf74082e14b554 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1939 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-11-28Add .h files for samsung exynos 5250Ronald G. Minnich
Per a conversation with Stefan, these chip-dependent files are moved to the src tree, in the manner of other chips (north and southbridge). Change-Id: I12645ba05eb241eda200ed06cb633541a6a98119 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Reviewed-on: http://review.coreboot.org/1925 Tested-by: build bot (Jenkins)
2012-11-16Fix Kconfig GENERATE_*_TABLE usageStefan Reinauer
Some boards selected GENERATE_ instead of HAVE_ Change-Id: I450c22d7b044f0c88c21692246d452d516a68a83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1841 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-11-16Clean up KconfigStefan Reinauer
- move VGA handling options into devices/Kconfig - make Devices a top level menu - move some options "closer" to the code they control Change-Id: Ia79541d18b2b0d9b89a8b154255e312060627c48 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1840 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Drop Kconfig.deprecated_optionsStefan Reinauer
Both remaining options, DRIVERS_PS2_KEYBOARD and ID_SECTION_OFFSET are not likely to go away any time soon, so let's not keep them in Kconfig.deprecated_options but move them close to the code they control. Change-Id: I310b877c5b3d5a3444056641c4aee07a48c4c4be Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1839 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Drop Kconfig variable BOARD_HAS_HARD_RESETStefan Reinauer
hard_reset was indeed consolidated and moved into the southbridge code a while ago, but the config variable was still kept alife, with some duplicate code. Change-Id: I60d4a87de916667f6e89353dfbe1a7b9eca380f7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1837 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 19:34:55 +0000