summaryrefslogtreecommitdiff
path: root/src/arch/arm64
AgeCommit message (Collapse)Author
2019-11-03arch/arm64: Pass cbmem_top to ramstage via calling argumentArthur Heymans
This solution is very generic and can in principle be implemented on all arch/soc. Currently the old infrastructure to pass on information from romstage to ramstage is left in place and will be removed in a follow-up commit. Nvidia Tegra will be handled in a separate patch because it has a custom ramstage entry. Instead trying to figure out which files can be removed from stages and which cbmem_top implementations need with preprocessor, rename all cbmem_top implementation to cbmem_top_romstage. Mechanisms set in place to pass on information from rom- to ram-stage will be replaced in a followup commit. Change-Id: I86cdc5c2fac76797732a3a3398f50c4d1ff6647a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-14arm64: Uprev Arm TF and adjust to BL31 parameter changesJulius Werner
This patch uprevs the Arm Trusted Firmware submodule to the new upstream master (commit 42cdeb930). Arm Trusted Firmware unified a bunch of stuff related to BL31 handoff parameters across platforms which involved changing a few names around. This patch syncs coreboot back up with that. They also made header changes that now allow us to directly include all the headers we need (in a safer and cleaner way than before), so we can get rid of some structure definitions that were duplicated. Since the version of entry point info parameters we have been using has been deprecated in Trusted Firmware, this patch switches to the new version 2 parameter format. NOTE: This may or may not stop Cavium from booting with the current pinned Trusted Firmware blob. Cavium maintainers are still evaluating whether to fix that later or drop the platform entirely. Tested on GOOGLE_KEVIN (rk3399). Change-Id: I0ed32bce5585ce191736f0ff2e5a94a9d2b2cc28 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-09arch/x86: Refactor CAR_GLOBAL quirk for FSP1.0Kyösti Mälkki
These platforms return to romstage from FSP only after already having torn CAR down. A copy of the entire CAR region is available and discoverable via HOB. Previously, CBMEM console detected on-the-fly that CAR migration had happened and relocated cbmem_console_p accoringlin with car_sync_var(). However, if the CAR_GLOBAL pointing to another object inside CAR is a relative offset instead, we have a more generic solution that can be used with timestamps code as well. Change-Id: Ica877b47e68d56189e9d998b5630019d4328a419 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35140 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-30arm64: Rename arm_tf.c/h to bl31.c/hJulius Werner
This patch renames arm_tf.c and arm_tf.h to bl31.c and bl31.h, respectively. That name is closer to the terminology used in most functions related to Trusted Firmware, and it removes the annoying auto-completion clash between arm64/arm_tf.c and arm64/armv8. Change-Id: I2741e2bce9d079b1025f82ecb3bb78a02fe39ed5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-29arch/arm64: Make ARM64 stages select ARCH_ARM64Arthur Heymans
Also don't define the default as this result in spurious lines in the .config. The only difference in config.h is on boards with the Nvidia tegra210 SOC that now select ARCH_ARM64, because its ramstage runs in that mode. The resulting binary is identical however. Change-Id: Iaa9cd902281e51f823717f6ea4c72e5736fefb31 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31315 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26AUTHORS: Move src/arch/arm64 copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional changes in this patch: - Make sure files say that they're part of the coreboot project - Move descriptions below the license header Note that the file include/arch/acpi.h is a fantastic example of why moving to the authors file is needed. Excluding the guard statements, it has 8 lines of copyrights for 3 function declarations. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I334baab2b4311eb1bd9ce3f67f49a68e8b73630c Reviewed-on: https://review.coreboot.org/c/coreboot/+/34606 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-26lib: ramdetect: Register exception handlers for ARMv8Asami Doi
Register exception handlers to avoid a Synchronous External Abort that is raised when you try to access a non-memory address on ARMv8. An exception handler can jump over the faulting instruction. This is the feature only for QEMU/AArch64. Signed-off-by: Asami Doi <d0iasm.pub@gmail.com> Change-Id: I09a306ca307ba4027d9758c3debc2e7c844c66b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2019-08-20arch/non-x86: Remove use of __PRE_RAM__Kyösti Mälkki
Change-Id: Id8918f40572497b068509b5d5a490de0435ad50b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-12arch, include, soc: Use common stdint.hJacob Garber
There are only minimal differences between the architecture specific stdint.h implementations, so let's tidy them up and merge them together into a single file. In particular, - Use 'unsigned long' for uintptr_t. This was already the case for x86 and riscv, while arm and mips used 'unsigned int', and arm64 and ppc64 used 'unsigned long long'. This change allows using a single integer type for uintptr_t across all architectures, and brings it into consistency with the rest of the code base, which generally uses 'unsigned long' for memory addresses anyway. This change required fixing several assumptions about integer types in the arm code. - Use _Bool as the boolean type. This is a specialized boolean type that was introduced in C99, and is preferrable over hacking booleans using integers. romcc sadly does not support _Bool, so for that we stick with the old uint8_t. - Drop the least and fast integer types. They aren't used anywhere in the code base and are an unnecessary maintenance burden. Using the standard fixed width types is essentially always better anyway. - Drop the UINT64_C() macro. It also isn't used anywhere and doesn't provide anything that a (uint64_t) cast doesn't. - Implement the rest of the MIN and MAX numerical limits. - Use static assertions to check that the integer widths are correct. Change-Id: I6b52f37793151041b7bdee9ec3708bfad69617b2 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-06-21arch: Add missing #include <commonlib/helpers.h>Elyes HAOUAS
ALIGN((a), b) and ALIGN_UP(a, b) needs 'helpers.h' Change-Id: I029c7c5cbb19c7e69997b3d84f929cb61e8e2b23 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-21fit: Refactor config node handlingJulius Werner
This patch makes some minor refactoring to the way the FIT parser handles config nodes. A lot of this code was written in the dawn age of depthcharge when its device tree library wasn't as well-stocked yet, so some of it can be rewritten nicer with more high-level primitives. There's no point in storing both the string name and the actual FDT node of a FIT image node separately, since the latter also contains the former, so remove that. Also eliminate code for the case of not having an FDT (which makes no sense), and move some more FDT validity/compat checking into fit_update_compat() (mostly in anticipation of later changes). This patch was adapted from depthcharge's http://crosreview.com/1553456 with a couple of modifications specific to coreboot's custom FIT loading code. Change-Id: Ia79e0fd0e1159c4aca64c453b82a0379b133350d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32870 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-17arm64: make comment match codeMarty E. Plummer
Change-Id: I37b8d5715cb6a32d4853e77098094cd5cffb9a4c Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-21src/arch/arm64: Remove variable set but not usedElyes HAOUAS
Change-Id: I4fe5771dd1ebf3d2a981dab08e98f1c018d14133 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-23src: include <assert.h> when appropriateElyes HAOUAS
Change-Id: Ib843eb7144b7dc2932931b9e8f3f1d816bcc1e1a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Guckian
2019-04-23src: Add missing include 'console.h'Elyes HAOUAS
Change-Id: Ie21c390ab04adb5b05d5f9760d227d2a175ccb56 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-04arch/io.h: Separate MMIO and PNP opsKyösti Mälkki
Change-Id: Ie32f1d43168c277be46cdbd7fbfa2445d9899689 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31699 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-22arch/arm64: Add PCI config support in romstageKyösti Mälkki
Change-Id: I9cc3dc51764f24b986434080f480932dceb8d133 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-02-22symbols.h: Add macro to define memlayout region symbolsJulius Werner
When <symbols.h> was first introduced, it only declared a handful of regions and we didn't expect that too many architectures and platforms would need to add their own later. However, our amount of platforms has greatly expanded since, and with them the need for more special memory regions. The amount of code duplication is starting to get unsightly, and platforms keep defining their own <soc/symbols.h> files that need this as well. This patch adds another macro to cut down the definition boilerplate. Unfortunately, macros cannot define other macros when they're called, so referring to region sizes as _name_size doesn't work anymore. This patch replaces the scheme with REGION_SIZE(name). Not touching the regions in the x86-specific <arch/symbols.h> yet since they don't follow the standard _region/_eregion naming scheme. They can be converted later if desired. Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/31539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-02-05bootmem: add new memory type for BL31Ting Shen
After CL:31122, we can finally define a memory type specific for BL31, to make sure BL31 is not loaded on other reserved area. Change-Id: Idbd9a7fe4b12af23de1519892936d8d88a000e2c Signed-off-by: Ting Shen <phoenixshen@google.com> Reviewed-on: https://review.coreboot.org/c/31123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-30selfload: check target memory type in selfload_checkTing Shen
Currently, selflock_check() verifies that the binary is loaded in an usable RAM area. Extend its functionality so we can also check that BL31 is loaded in a manually reserved area, and fail early if the range is not protected. Change-Id: Iecdeedd9e8da67f73ac47d2a82e85b306469a626 Signed-off-by: Ting Shen <phoenixshen@google.com> Reviewed-on: https://review.coreboot.org/c/31122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
Does not fix 3rdparty/, *.S or *.ld or yet. Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/17656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-04src: Move {pci,pnp}_devfn_t to common 'device/pci_type.h'Elyes HAOUAS
Definitions of these types are arch-agnostic. Shared device subsystem files cannot include arch/pci_ops.h for ARM and arch/io.h for x86. Change-Id: I6a3deea676308e2dc703b5e06558b05235191044 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-04src: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ie05869901ac33d7089e21110f46c1241f7ee731f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30047 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <cbmem.h>Elyes HAOUAS
Change-Id: I89e03b6def5c78415bf73baba55941953a70d8de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29302 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-25selfboot: create selfboot_check function, remove check paramRonald G. Minnich
The selfboot function was changed at some point to take a parameter which meant "check the allocated descriptors to see if they target regions of real memory." The region check had to be buried deep in the last step of loading since that is where those descriptors were created and used. An issue with the use of the parameter was that it was not possible for compilers to easily divine whether the check code was used, and it was hence possible for the code, and its dependencies, to be compiled in even if never used (which caused problems for the rampayload code). Now that bounce buffers are gone, we can hoist the check code to the outermost level. Further, by creating a selfload_check and selfload function, we can make it easy for compilers to discard unused code: if selfload_check is never called, all the code it uses can be discarded too. Change-Id: Id5b3f450fd18480d54ffb6e395429fba71edcd77 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/29259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-10-12libpayload: arm64: Conform to new coreboot lib_helpers.h and assume EL2Julius Werner
This patch adds the new, faster architectural register accessors to libpayload that were already added to coreboot in CB:27881. It also hardcodes the assumption that coreboot payloads run at EL2, which has already been hardcoded in coreboot with CB:27880 (see rationale there). This means we can drop all the read_current/write_current stuff which added a lot of unnecessary helpers to check the current exception level. This patch breaks payloads that used read_current/write_current accessors, but it seems unlikely that many payloads deal with this stuff anyway, and it should be a trivial fix (just replace them with the respective _el2 versions). Also add accessors for a couple of more registers that are required to enable debug mode while I'm here. Change-Id: Ic9dfa48411f3805747613f03611f8a134a51cc46 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/29017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2018-10-11selfboot: remove bounce buffersRonald G. Minnich
Bounce buffers used to be used in those cases where the payload might overlap coreboot. Bounce buffers are a problem for rampayloads as they need malloc. They are also an artifact of our x86 past before we had relocatable ramstage; only x86, out of the 5 architectures we support, needs them; currently they only seem to matter on the following chipsets: src/northbridge/amd/amdfam10/Kconfig src/northbridge/amd/lx/Kconfig src/northbridge/via/vx900/Kconfig src/soc/intel/fsp_baytrail/Kconfig src/soc/intel/fsp_broadwell_de/Kconfig The first three are obsolete or at least could be changed to avoid the need to have bounce buffers. The last two should change to no longer need them. In any event they can be fixed or pegged to a release which supports them. For these five chipsets we change CONFIG_RAMBASE from 0x100000 (the value needed in 1999 for the 32-bit Linux kernel, the original ramstage) to 0xe00000 (14 Mib) which will put the non-relocatable x86 ramstage out of the way of any reasonable payload until we can get rid of it for good. 14 MiB was chosen after some discussion, but it does fit well: o Fits in the 16 MiB cacheable range coreboot sets up by default o Most small payloads are well under 14 MiB (even kernels!) o Most large payloads get loaded at 16 MiB (especially kernels!) With this change in place coreboot correctly still loads a bzImage payload. Werner reports that the 0xe00000 setting works on his broadwell systems. Change-Id: I602feb32f35e8af1d0dc4ea9f25464872c9b824c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/28647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-14complier.h: add __always_inline and use it in code baseAaron Durbin
Add a __always_inline macro that wraps __attribute__((always_inline)) and replace current users with the macro, excluding files under src/vendorcode. Change-Id: Ic57e474c1d2ca7cc0405ac677869f78a28d3e529 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@google.com>
2018-08-17arm64: Factor out common parts of romstage execution flowJulius Werner
The romstage main() entry point on arm64 boards is usually in mainboard code, but there are a handful of lines that are always needed in there and not really mainboard specific (or chipset specific). We keep arguing every once in a while that this isn't ideal, so rather than arguing any longer let's just fix it. This patch moves the main() function into arch code with callbacks that the platform can hook into. (This approach can probably be expanded onto other architectures, so when that happens this file should move into src/lib.) Tested on Cheza and Kevin. I think the approach is straight-forward enough that we can take this without testing every board. (Note that in a few cases, this delays some platform-specific calls until after console_init() and exception_init()... since these functions don't really take that long, especially if there is no serial console configured, I don't expect this to cause any issues.) Change-Id: I7503acafebabed00dfeedb00b1354a26c536f0fe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28199 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-13arm64: mmu: Spot check security state for TTB mappingJulius Werner
Since commit 372d0ff1d1 (arch/arm64: mmu: Spot check TTB memory attributes), we already check the memory attributes that the TTB region is mapped with to avoid configuration mistakes that cause weird issues (because the MMU walks the page tables with different memory attributes than they were written with). Unfortunately, we only checked cachability, but the security state attribute is just as important for this (because it is part of the cache tag, meaning that a cache entry created by accessing the non-secure mapping won't be used when trying to read the same address through a secure mapping... and since AArch64 page table walks are cache snooping and we rely on that behavior, this can lead to the MMU not seeing the new page table entries we just wrote). This patch adds the check for security state and cleans up that code a little. Change-Id: I70cda4f76f201b03d69a9ece063a3830b15ac04b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/28017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-10arm64: Turn architectural register accessors into inline functionsJulius Werner
Accesses to architectural registers should be really fast -- they're just registers, after all. In fact, the arm64 architecture uses them for some timing-senstive uses like the architectural timer. A read should be: one instruction, no data dependencies, done. However, our current coreboot framework wraps each of these accesses into a separate function. Suddenly you have to spill registers on a stack, make a function call, move your stack pointer, etc. When running without MMU this adds a significant enough delay to cause timing problems when bitbanging a UART on SDM845. This patch replaces all those existing functions with static inline definitions in the header so they will get reduced to a single instruction as they should be. Also use some macros to condense the code a little since they're all so regular, which should make it easier to add more in the future. This patch also expands all the data types to uint64_t since that's what the actual assembly instruction accesses, even if the register itself only has 32 bits (the others will be ignored by the processor and set to 0 on read). Arm regularly expands registers as they add new bit fields to them with newer iterations of the architecture anyway, so this just prepares us for the inevitable. Change-Id: I2c41cc3ce49ee26bf12cd34e3d0509d8e61ffc63 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-10arm64: Drop checks for current exception level, hardcode EL3 assumptionJulius Werner
When we first created the arm64 port, we weren't quite sure whether coreboot would always run in EL3 on all platforms. The AArch64 A.R.M. technically considers this exception level optional, but in practice all SoCs seem to support it. We have since accumulated a lot of code that already hardcodes an implicit or explicit assumption of executing in EL3 somewhere, so coreboot wouldn't work on a system that tries to enter it in EL1/2 right now anyway. However, some of our low level support libraries (in particular those for accessing architectural registers) still have provisions for running at different exception levels built-in, and often use switch statements over the current exception level to decide which register to access. This includes an unnecessarily large amount of code for what should be single-instruction operations and precludes further optimization via inlining. This patch removes any remaining code that dynamically depends on the current exception level and makes the assumption that coreboot executes at EL3 official. If this ever needs to change for a future platform, it would probably be cleaner to set the expected exception level in a Kconfig rather than always probing it at runtime. Change-Id: I1a9fb9b4227bd15a013080d1c7eabd48515fdb67 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-10arm64: Remove set_cntfrq() functionJulius Werner
CNTFRQ_EL0 is a normal AArch64 architectural register like hundreds of others that are all accessed through the raw_(read|write)_${register}() family of functions. There's no reason why this register in particular should have an inconsistent accessor, so replace all instances of set_cntfrq() with raw_write_cntfrq_el0() and get rid of it. Change-Id: I599519ba71c287d4085f9ad28d7349ef0b1eea9b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27947 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09src/arch: Fix typoElyes HAOUAS
Change-Id: I24d219b4ce6033f64886e22973ca8716113d319f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-07arch: Retire cache_sync_instructions() from <arch/cache.h> (except arm)Julius Werner
cache_sync_instructions() has been superseded by arch_program_segment_loaded() and friends for a while. There are no uses in common code anymore, so let's remove it from <arch/cache.h> for all architectures. arm64 still has an implementation and one reference, but they are not really needed since arch_program_segment_loaded() does the same thing already. Remove them. Leave it in arm(32) since there are several references (including in SoC code) that I don't feel like tracking down and testing right now. Change-Id: I6b776ad49782d981d6f1ef0a0e013812cf408524 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-07arm64: Disable MMU during legacy payload handoff (without Arm TF)Julius Werner
coreboot payloads expect to be entered with MMU disabled on arm64. The usual path via Arm TF already does this, so let's align the legacy path (without Secure Monitor) to do the same. Change-Id: I18717e00c905123d53b27a81185b534ba819c7b3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-26arch/arm64: Add Kconfig to include BL31 as blobPatrick Rudolph
Add Kconfig options to not build the Arm Trusted Firmware, but use a precompiled binary instead. To be used on platforms that do not have upstream Arm Trusted Firmware support and useful for development purposes. It is recommended to use upstream Arm Trusted Firmware where possible. Change-Id: I17954247029df627a3f4db8b73993bd549e55967 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-02src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I3873cc8ff82cb043e4867a6fe8c1f253ab18714a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-26arm64: Reimplement mmu_disable() in assemblyJulius Werner
Disabling the MMU with proper cache behavior is a bit tricky on ARM64: you can flush the cache first and then disable the MMU (like we have been doing), but then you run the risk of having new cache lines allocated in the tiny window between the two, which may or may not become a problem when those get flushed at a later point (on some platforms certain memory regions "go away" at certain points in a way that makes the CPU very unhappy if it ever issues a write cycle to them again afterwards). The obvious alternative is to first disable the MMU and then flush the cache, ensuring that every memory access after the flush already has the non-cacheable attribute. But we can't just flip the order around in the C code that we have because then those accesses in the tiny window in-between will go straight to memory, so loads may yield the wrong result or stores may get overwritten again by the later cache flush. In the end, this all shouldn't really be a problem because we can do both operations purely from registers without doing any explicit memory accesses in-between. We just have to reimplement the function in assembly to make sure the compiler doesn't insert any stack accesses at the wrong points. Change-Id: Ic552960c91400dadae6f130b2521a696eeb4c0b1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Switch remaining uses of __ASSEMBLY__ to __ASSEMBLER__Julius Werner
Some arm64 files that were imported from other projects use the __ASSEMBLY__ macro to test whether a header is included from a C or an assembly file. This patch switches them to the coreboot standard __ASSEMBLER__, which has the advantage of being a GCC builtin so that the including file doesn't have to supply it explicitly. Change-Id: I1023f72dd13857b14ce060388e97c658e748928f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-26arm64: Drop dead file stage_entry.SJulius Werner
This file has been dead since commit 7dcf9d51 (arm64: tegra132: tegra210: Remove old arm64/stage_entry.S), I just forgot to remove it. Change-Id: I0dd6666371036ecd42c1b256dbbe22a01ae959b8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-19lib: Add FIT payload supportPatrick Rudolph
* Add support for parsing and booting FIT payloads. * Build fit loader code from depthcharge. * Fix coding style. * Add Kconfig option to add compiletime support for FIT. * Add support for initrd. * Add default compat strings * Apply optional devicetree fixups using dt_apply_fixups Starting at this point the CBFS payload/ can be either SELF or FIT. Tested on Cavium SoC: Parses and loads a Linux kernel 4.16.3. Tested on Cavium SoC: Parses and loads a Linux kernel 4.15.0. Tested on Cavium SoC: Parses and loads a Linux kernel 4.1.52. Change-Id: I0f27b92a5e074966f893399eb401eb97d784850d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-06-19lib/prog_loaders: Move argument selection into selfloadPatrick Rudolph
Set the payload argument in selfload, as other (non self) payloads, are going to set a different argument. Change-Id: I994f604fc4501e0e3b00165819f796b1b8275d8c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25861 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-24src: Add space after 'while'Elyes HAOUAS
Change-Id: I44cdb6578f9560cf4b8b52a4958b95b65e0cd57a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-05-22Introduce bootblock self-decompressionJulius Werner
Masked ROMs are the silent killers of boot speed on devices without memory-mapped SPI flash. They often contain awfully slow SPI drivers (presumably bit-banged) that take hundreds of milliseconds to load our bootblock, and every extra kilobyte of bootblock size has a hugely disproportionate impact on boot speed. The coreboot timestamps can never show that component, but it impacts our users all the same. This patch tries to alleviate that issue a bit by allowing us to compress the bootblock with LZ4, which can cut its size down to nearly half. Of course, masked ROMs usually don't come with decompression algorithms built in, so we need to introduce a little decompression stub that can decompress the rest of the bootblock. This is done by creating a new "decompressor" stage which runs before the bootblock, but includes the compressed bootblock code in its data section. It needs to be as small as possible to get a real benefit from this approach, which means no device drivers, no console output, no exception handling, etc. Besides the decompression algorithm itself we only include the timer driver so that we can measure the boot speed impact of decompression. On ARM and ARM64 systems, we also need to give SoC code a chance to initialize the MMU, since running decompression without MMU is prohibitively slow on these architectures. This feature is implemented for ARM and ARM64 architectures for now, although most of it is architecture-independent and it should be relatively simple to port to other platforms where a masked ROM loads the bootblock into SRAM. It is also supposed to be a clean starting point from which later optimizations can hopefully cut down the decompression stub size (currently ~4K on RK3399) a bit more. NOTE: Bootblock compression is not for everyone. Possible side effects include trying to run LZ4 on CPUs that come out of reset extremely underclocked or enabling this too early in SoC bring-up and getting frustrated trying to find issues in an undebuggable environment. Ask your SoC vendor if bootblock compression is right for you. Change-Id: I0dc1cad9ae7508892e477739e743cd1afb5945e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-16Revert "cbfs/payload type: Fix build warning and whitespace in name"Ronald G. Minnich
This reverts commit 717ba748366cda19b7532897a5b8d59fc2cd25d9. This breaks seabios and a few other payloads. This is not ready for use. Change-Id: I48ebe2e2628c11e935357b900d01953882cd20dd Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/26310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 20:07:37 +0000