summaryrefslogtreecommitdiff
path: root/src/arch/riscv/Makefile.inc
AgeCommit message (Collapse)Author
2019-11-06arch/riscv: Rename `stages.c` to `romstage.c`Nico Huber
It's only used for romstage and is incompatible to ramstages. The latter get `cbmem_top` passed as a third argument now. Also drop comments that don't apply to this file anymore. Change-Id: Ibabb022860f5d141ab35922f30e856da8473b529 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-05arch/riscv: Don't link `stages.c` into ramstageNico Huber
It's superseded by `ramstage.S`. Change-Id: I81648da2f2af3ad73b3b51471c6fa2daac0540b1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36610 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08arch/riscv: Enable FIT supportJonathan Neuschäfer
Tested on qemu-riscv. Depends on OpenSBI integration and proper memory detection in qemu. Boots into Linux until initrd should be loaded. Tested on SiFive/unleashed: Boots into Linux until earlycon terminates. Change-Id: I5ebc6cc2cc9e328f36d70fba13555386bb8c29d6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30292 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-03riscv: add support for OpenSBIXiang Wang
Call OpenSBI in M-Mode and use it to set up SBI and to lockdown the platform. It will also jump to the specified payload when done. This behaviour is similar to BL31 on aarch31. The payload is 41KiB in size on qemu. Tested on qemu-riscv: Required to boot a kernel as OpenSBI's instruction emulation feature is required on that virtual machine. Tested on SiFive/unleashed: The earlycon is working. No console after regular serial driver should take over, which might be related to kernel config. Change-Id: I2a178595bd2aa2e1f114cbc69e8eadd46955b54d Signed-off-by: Xiang Wang <merle@hardenedlinux.org> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-02-13riscv: Add initial support for 32bit boardsPhilipp Hug
* Adding separate targets for 32bit and 64bit qemu * Using the riscv64 toolchain for 32bit builds requires setting -m elf32lriscv * rv32/rv64 is currently configured with ARCH_RISCV_RV32/RV64 and not per stage. This should probably be changed later. TEST=Boots to "Payload not loaded." on 32bit qemu using the following commands: util/riscv/make-spike-elf.sh build/coreboot.rom build/coreboot.elf qemu-system-riscv32 -M virt -m 1024M -nographic -kernel build/coreboot.elf Change-Id: I35e59b459d1770df10b51fe9e77dcc474d7c75a0 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/31253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-02-02riscv: Simplify payload handlingXiang Wang
1. Simplify payload code and convert it to C 2. Save the FDT pointer to HLS (hart-local storage). 3. Don't use mscratch to pass FDT pointer as it is used for exception handling. Change-Id: I32bf2a99e07a65358a7f19b899259f0816eb45e8 Signed-off-by: Xiang Wang <wxjstz@126.com> Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/31179 Reviewed-by: ron minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17riscv: create Kconfig architecture features for new partsRonald G. Minnich
RISCV parts can be created with any one of four CPU modes enabled, with or without PMP, and with either 32 or 64 bit XLEN. In anticipation of parts to come, create the Kconfig variables for these architecture attributes. Change-Id: I32ee51b2a469c7684a2f1b477bdac040e972e253 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/30348 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-05riscv: add support for supervisor binary interface (SBI)Xiang Wang
SBI is runtime service for OS. For an introduction, please refer to https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.md Change-Id: Ib6c1f21d2f085f02208305dc4e3a0f970d400c27 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-11-05riscv: add support smp_pause / smp_resumeXiang Wang
See https://doc.coreboot.org/arch/riscv/ we know that we need to execute smp_pause at the start of each stage and smp_resume at the end of each stage. Change-Id: I6f8159637bfb15f54f0abeb335de2ba6e9cf82fb Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/29023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-10-11riscv: add physical memory protection (PMP) supportXiang Wang
These codes are written by me based on the privileged instruction set. I tested it by qemu/riscv-probe. Change-Id: I2e9e0c94e6518f63ade7680a3ce68bacfae219d4 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28569 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-04arch/riscv: Adjust compiler flags for scan-buildJonathan Neuschäfer
Clang doesn't understand -march=riscv64imac and -mcmodel=medany, so don't use them when running the clang static analyzer. On the other hand, __riscv and __riscv_xlen need to be defined in order to select some macros in src/arch/riscv/include/arch/encoding.h. __riscv_flen selects the floating-point paths in src/arch/riscv/misaligned.c. -mabi is moved with -march for consistency. A complete list of preprocessor definitions on RISC-V can be found at https://github.com/riscv/riscv-toolchain-conventions#cc-preprocessor-definitions With this commit, scan-build produces a useful result on RISC-V. Change-Id: Ia2eb8c3c2f7eb5ddd47db24b8e5fcd6eaf6c5589 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-14arch/riscv: provide a monotonic timerPhilipp Hug
The RISC-V Privileged Architecture specification defines the Machine Time Registers (mtime and mtimecmp) in section 3.1.15. Makes it possible to use the generic udelay. The timer is enabled using RISCV_USE_ARCH_TIMER for the lowrisc, sifive and ucb soc. Change-Id: I5139601226e6f89da69e302a10f2fb56b4b24f38 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/27434 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-10riscv: update misaligned memory access exception handlingXiang Wang
Support for more situations: floating point, compressed instructions, etc. Add support for redirect exception to S-Mode. Change-Id: I9983d56245eab1d458a84cb1432aeb805df7a49f Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-05riscv: add entry assembly file for RAMSTAGEXiang Wang
RAMSTAGE will revoke CAR/scratchpad, so stack and exception handling needs to be moved to ddr memory. So add a assembly file to do this. Change-Id: I58aa6ff911f385180bad6e026d3c3eace846e37d Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-01riscv: remove redundancy in MakefileXiang Wang
src/arch/riscv/stages.c is an entry of romstage/ramstage, and does not needs to be bootblock. src/arch/riscv/id.S src/arch/riscv/id.ld is used to generate some compile/board/time information, which is repeated with src/lib/version.c Change-Id: Ic736b378e24df387584c5f86a2b04078fc55723d Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27557 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-31riscv: fix issues (timestrap & PRIu64)Xiang Wang
When I tried to compile the RISC-V code (202e7d4f3c), I found some errors: `PRIu64` is undefined src/arch/riscv/timestamp.c does not exist Currently RISC-V does not have the implementation and use of timestamp, so I temporarily delete the code related to timestamp in the Makefile. And define PRIu64. Change-Id: I7f1a0793113bce7c1411e39f102cf20dbadda5d6 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-07-18arch/riscv: Fix makefile to only set flags for riscvMartin Roth
This was updating flags for ALL architectures, not just riscv. That was bad, and gave us errors, although they weren't fatal for some reason: i386-elf-gcc: error: missing argument to '-mcmodel=' i386-elf-gcc: error: missing argument to '-march=' i386-elf-gcc: error: missing argument to '-mabi=' This issue started from commit 5fed693a (riscv: add support for modifying compiler options) Add comments to the other 'endif' statements since they're now surrounded by a global ifeq Change-Id: Ifa12ad98b04a5ac36148609ccdf46ca427fc5a27 Signed-off-by: Martin Roth <martin@coreboot.org> Reviewed-on: https://review.coreboot.org/27535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-17riscv: add support for modifying compiler optionsXiang Wang
Each HART of a SoC like fu540 supports a different ISA. In order for the coreboot's code can run on each core, need to modify the compile options. So add this code. Change-Id: Ie33edc175e612846d4a74f3cbf7520d4145cb68b Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-02-20arch/riscv: Make RVC support configurableJonathan Neuschäfer
In order to support RISC-V processors with and without the RVC extension, configure the architecture variant (-march=...) explicitly. NOTE: Spike does support RVC, but currently doesn't select ARCH_RISCV_COMPRESSED, because coreboot's trap handler doesn't support RVC. Change-Id: Id4f69fa6b33604a5aa60fd6f6da8bd966494112f Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02riscv: Remove config string supportJonathan Neuschäfer
The code dealing with the old config string isn't needed anymore, because the config string has been deprecated in favor of OpenFirmware-derived devicetrees. Change-Id: I71398fb4861dbaf7eefc6e6f222bb7159798fafa Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Remove the current SBI implementationJonathan Neuschäfer
This Supervisor Binary Interface, which is based on a page of code that's provided to operating systems by the M-mode software, has been superseded by a different (currently not really documented) SBI, which is based on directly executing ECALLs instructions. Thus some of our code becomes obsolete. Just rip it out until we implement the new SBI. Change-Id: Iec9c20b750f39a2b8f1553e25865bbf150605a6d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-12riscv: start to use the configstring functionsRonald G. Minnich
These functions will allow us to remove hardcodes, as long as we can verify the qemu and lowrisc targets implement the configstring correctly. Hence, for the most part, we'll start with mainboard changes first. Define a new config variable, CONFIG_RISCV_CONFIGSTRING, which has a default value that works on all existing systems but which can be changed as needed for a new SOC or mainboard. Change-Id: I7dd3f553d3e61f1c49752fb04402b134fdfdf979 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17256 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-07riscv: Unify SBI call implementations under arch/riscv/Jonathan Neuschäfer
Note that currently, traps are only handled by the trap handler installed in the bootblock. The romstage and ramstage don't override it. TEST=Booted emulation/spike-qemu and lowrisc/nexys4ddr with a linux payload. It worked as much as before (Linux didn't boot, but it made some successful SBI calls) Change-Id: Icce96ab3f41ae0f34bd86e30f9ff17c30317854e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17057 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-24RISCV: Clean up the common architectural codeRonald G. Minnich
This version of coreboot successfully starts a Harvey (Plan 9) kernel as a payload, entering main() with no supporting assembly code for startup. The Harvey port is not complete so it just panics but ... it gets started. We provide a standard payload function that takes a pointer argument and makes the jump from machine to supervisor mode; the days of kernels running in machine mode are over. We do some small tweaks to the virtual memory code. We temporarily disable two functions that won't work on some targets as register numbers changed between 1.7 and 1.9. Once lowrisc catches up we'll reenable them. We add the PAGETABLES to the memlayout.ld and use _pagetables in the virtual memory setup code. We now use the _stack and _estack from memlayout so we know where things are. As time goes on maybe we can kill all the magic numbers. Change-Id: I6caadfa9627fa35e31580492be01d4af908d31d9 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17058 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-23arch/riscv: Implement the SBI againJonathan Neuschäfer
Not all SBI calls are implemented, but it's enough to see a couple dozen lines of Linux boot output. It should also be noted that the SBI is still in flux: https://groups.google.com/a/groups.riscv.org/forum/#!topic/sw-dev/6oNhlW0OFKM Change-Id: I80e4fe508336d6428ca7136bc388fbc3cda4f1e4 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16119 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28arch/riscv: Refactor bootblock.SJonathan Neuschäfer
A few things are currently missing: - The trap handler doesn't set the stack pointer, which can easily result in trap loops or memory corruptions. - The SBI trampolin page (as described in version 1.9 of the RISC-V Privileged Architecture Specification), has been removed for now. Change-Id: Id89c859fab354501c94a0e82d349349c29fa4cc6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15591 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-14spike-riscv: Look for the CBFS in RAMJonathan Neuschäfer
Change-Id: I98927a70adc45d9aca916bd985932b94287921de Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15285 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-06-12arch/riscv: Compile with -mcmodel=medanyJonathan Neuschäfer
In the default (medlow) code model, pointers are loaded with a lui, addi instruction sequence: lui a0, 0xNNNNN addi a0, a0, 0xNNN Since lui sign-extends bits 32-63 from bit 31 on RV64, lui/addi can't load pointers just above 0x80000000, where RISC-V's RAM now lives. The medany code model gets around this restriction by loading pointers trough auipc and addi: auipc a0, 0xNNNNN addi a0, a0, 0xNNN This way, any pointer within the current pc ±2G can be loaded, which is by far sufficient for coreboot. Change-Id: I77350d9218a687284c1337d987765553cf915a22 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15148 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-12arch/riscv: Add misc.c to bootblock/romstage to get udelay()Jonathan Neuschäfer
The uart8250mem driver needs it. Change-Id: I09e6a17cedf8a4045f008f5a0d225055d745e8db Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15147 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-05-03build system: remove CBFSTOOL_PRE1_OPTSPatrick Georgi
It isn't used anymore. Change-Id: Ie554d1dd87ae3f55547466e484c0864e55c9d102 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14567 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-09Makefile: Add build-time overlap check for programs loaded after corebootJulius Werner
On non-x86 platforms, coreboot uses the memlayout.ld mechanism to statically allocate the different memory regions it needs and guarantees at build time that there are no dangerous overlaps between them. At the end of its (ramstage) execution, however, it usually loads a payload (and possibly other platform-specific components) that is not integrated into the coreboot build system and therefore cannot provide the same overlap guarantees through memlayout.ld. This creates a dangerous memory hazard where a new component could be loaded over memory areas that are still in use by the code-loading ramstage and lead to arbitrary memory corruption bugs. This patch fills this gap in our build-time correctness guarantees by adding the necessary checks as a new intermediate Makefile target on route to assembling the final image. It will parse the memory footprint information of the payload (and other platform-specific post-ramstage components) from CBFS and compare it to a list of memory areas known to be still in use during late ramstage, generating a build failure in case of a possible hazard. BUG=chrome-os-partner:48008 TEST=Built Oak while moving critical regions in the way of BL31 or the payload, observing the desired build-time errors. Built Nyan, Jerry and Falco without issues for good measure. Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13949 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-28Makefile: Make full use of src-to-obj macroNico Huber
There were several spots in the tree where the path to a per class object file was hardcoded. To make use of the src-to-obj macro for this, it had to be moved before the inclusion of subdirs. Which is fine, as it doesn't have dependencies beside $(obj). Tested by verifying that the resulting coreboot.rom files didn't change for all of Jenkins' abuild configurations. Change-Id: I2eb1beeb8ae55872edfd95f750d7d5a1cee474c4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/13180 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-02build system: Add more files through cbfs-files instead of manual rulesPatrick Georgi
verstage, romstage, and payload can be added through infrastructure now. Change-Id: Ib9e612ae35fb8c0230175f5b8bca1b129f366f4b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/12549 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-16riscv-memlayout: fix existing memlayout issues, add sbi interfaceThaminda Edirisooriya
Existing memlayout code placed sections in overlapping areas, and would overwrite the payload if it was large enough. Update memlayout.ld in src/mainboard/emulation/spike-riscv to represent the spike emulator, and add sbi interface which now has room into src/arch/riscv/bootblock.S. Add utility code to qemu-riscv, but emulator itself has yet to be updated to new ISA and as such should not be used. Update Makefile to include all the files necessary for sbi interface. Clean up unused include in src/arch/riscv/include/atomic.h and whitespace in src/mainboard/emulation/spike-riscv/memlayout.ld Fixed whitespace issues in spike_util.c Change-Id: Id97fe75e45ac1361005bec6d421756ee3f98a508 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11370 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-10riscv-trap-handling: Add implementation for trap calls in riscvThaminda Edirisooriya
RISCV requires the bios/bootloader to set up an interface by which it can get information about memory, talk to host devices, etc. Put implementation for spike in src/mainboard/emulation/spike-riscv/spike_util.c, and src/arch/riscv/trap_handler.c Change-Id: Ie1d5f361595e48fa6cc1fac25485ad623ecdc717 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11368 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-09linking: add and use LDFLAGS_commonAaron Durbin
Add an LDFLAGS_common variable and use that for each stage during linking within all the architectures. All the architectures support gc-sections, and as such they should be linking in the same way. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built rambi and analyzed the relocatable ramstage. Change-Id: I41fbded54055455889b297b9e8738db4dda0aad0 Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11522 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2015-07-22riscv: Link in libgccPatrick Georgi
The new toolchain depends on it. Change-Id: I9070925eeb3f63a6c31e7474ffb9cba15884703d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/10976 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-20build system: use archives, not linker action to shorten command linesPatrick Georgi
Intermediate linking may distort linker behavior (in particular related to weak symbols). The idea is that archives are closer to 'just a list of object files', and ideally makes the linker more predictable. Using --whole-archive, the linker doesn't optimize out object files just because their symbols were already provided by weak versions. However it shouldn't be used for libgcc, because that one has some unexpected side-effects. Change-Id: Ie226c198a93bcdca2d82c02431c72108a1c6ea60 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10139 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
Non-x86 boards currently need to hardcode the position of their CBFS master header in a Kconfig. This is very brittle because it is usually put in between the bootblock and the first CBFS entry, without any checks to guarantee that it won't overlap either of those. It is not fun to debug random failures that move and disappear with tiny alignment changes because someone decided to write "ORBC1112" over some part of your data section (in a way that is not visible in the symbolized .elf binaries, only in the final image). This patch seeks to prevent those issues and reduce the need for manual configuration by making the image layout a completely automated part of cbfstool. Since automated placement of the CBFS header means we can no longer hardcode its position into coreboot, this patch takes the existing x86 solution of placing a pointer to the header at the very end of the CBFS-managed section of the ROM and generalizes it to all architectures. This is now even possible with the read-only/read-write split in ChromeOS, since coreboot knows how large that section is from the CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be changed on systems that place other data next to coreboot/CBFS in ROM). Also adds a feature to cbfstool that makes the -B (bootblock file name) argument on image creation optional, since we have recently found valid use cases for CBFS images that are not the first boot medium of the device (instead opened by an earlier bootloader that can already interpret CBFS) and therefore don't really need a bootblock. BRANCH=None BUG=None TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco. Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229975 Reviewed-on: http://review.coreboot.org/9620 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
Some projects (like ChromeOS) put more content than described by CBFS onto their image. For top-aligned images (read: x86), this has traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the area actually managed by CBFS, as opposed to ROM_SIZE) that is used to calculate the CBFS entry start offset. On bottom-aligned boards, many define a fake (smaller) ROM_SIZE for only the CBFS part, which is not consistently done and can be an issue because ROM_SIZE is expected to be a power of two. This patch changes all non-x86 boards to describe their actual (physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a mainboard Kconfig select (which is the correct place to declare unchangeable physical properties of the board). It also changes the cbfstool create invocation to use CBFS_SIZE as the -s parameter for those architectures, which defaults to ROM_SIZE but gets overridden for special use cases like ChromeOS. This has the advantage that cbfstool has a consistent idea of where the area it is responsible for ends, which offers better bounds-checking and is needed for a subsequent fix. Also change the FMAP offset to default to right behind the (now consistently known) CBFS region for non-x86 boards, which has emerged as a de-facto standard on those architectures and allows us to reduce the amount of custom configuration. In the future, the nightmare that is ChromeOS's image build system could be redesigned to enforce this automatically, and also confirm that it doesn't overwrite any space used by CBFS (which is now consistently defined as the file size of coreboot.rom on non-x86). CQ-DEPEND=CL:231576,CL:231475 BRANCH=None BUG=chromium:422501 TEST=Built and booted on Veyron_Pinky. Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71 Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229974 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9619 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-04-06build system: run linker scripts through the preprocessorPatrick Georgi
This allows combining and simplifying linker scripts. This is inspired by the commit listed below, but rewritten to match upstream, and split in smaller pieces to keep intent clear. Change-Id: Ie5c11bd8495a399561cefde2f3e8dd300f4feb98 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org> Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170 Reviewed-on: http://review.coreboot.org/9303 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-04build system x86: deprecate bootblock_lds and ldscripts variablesPatrick Georgi
Instead of keeping this separate variable around, add linker scripts to the $(class)-y source lists and let the build system sort things out. This is inspired by the commit listed below, but rewritten to match upstream, and split in smaller pieces to keep intent clear. Change-Id: I4af687becf2971e009cb077debc902d2f0722cfb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org> Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170 Reviewed-on: http://review.coreboot.org/9289 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-04-03program loading: add prog_run() functionAaron Durbin
The prog_run() function abstracts away what is required for running a given program. Within it, there are 2 calls: 1. platform_prog_run() and 2. arch_prog_run(). The platform_prog_run() allows for a chipset to intercept a program that will be run. This allows for CPU switching as currently needed in t124 and t132. Change-Id: I22a5dd5bfb1018e7e46475e47ac993a0941e2a8c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/8846 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05RISCV: one last little nit to make it build and runRonald G. Minnich
Change-Id: I6e9e1dff09c08079774f7d6e60e67a12760d37b4 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7645 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-04RISCV: get RISCV to build againRonald G. Minnich
This makes lzmadecode 64-bit clean (I hope). It also cleans up a few other nits. Change-Id: I24492e9f357e8d3a6de6abc351267f900eb4a19a Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7623 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-12-01Add UCB RISCV support for architecture, soc, and emulation mainboard..Ronald G. Minnich
Works in the RISCV version of QEMU. Note that the lzmadecode is so unclean that it needs a lot of work. A cleanup is in progress. We decided in Prague to do this as one thing, because it forms a nice case study of the bare minimum you need to add to get a new architecture going in qemu. Change-Id: If5af15c3a70733d219973e0d032746f8ab027e4d Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7584 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)