summaryrefslogtreecommitdiff
path: root/src/arch/riscv/bootblock.S
AgeCommit message (Collapse)Author
2020-03-06src/arch/riscv: Convert to SPDX license headerPatrick Georgi
This also drops individual copyright notices, all mentioned authors in that part of the tree are listed in AUTHORS. Change-Id: I770c1afd9b68a40ec0e69818f24b5ef3ad4f1d35 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-02-13riscv: Add initial support for 32bit boardsPhilipp Hug
* Adding separate targets for 32bit and 64bit qemu * Using the riscv64 toolchain for 32bit builds requires setting -m elf32lriscv * rv32/rv64 is currently configured with ARCH_RISCV_RV32/RV64 and not per stage. This should probably be changed later. TEST=Boots to "Payload not loaded." on 32bit qemu using the following commands: util/riscv/make-spike-elf.sh build/coreboot.rom build/coreboot.elf qemu-system-riscv32 -M virt -m 1024M -nographic -kernel build/coreboot.elf Change-Id: I35e59b459d1770df10b51fe9e77dcc474d7c75a0 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/31253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-02-02riscv: Simplify payload handlingXiang Wang
1. Simplify payload code and convert it to C 2. Save the FDT pointer to HLS (hart-local storage). 3. Don't use mscratch to pass FDT pointer as it is used for exception handling. Change-Id: I32bf2a99e07a65358a7f19b899259f0816eb45e8 Signed-off-by: Xiang Wang <wxjstz@126.com> Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/31179 Reviewed-by: ron minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-05riscv: add support to block smp in each stageXiang Wang
Each stage performs some basic initialization (stack, HLS etc) and then call smp_pause to enter the single-threaded state. The main work of each stage is executed in a single-threaded state, and the multi-threaded state is restored by call smp_resume while booting the next stage. Change-Id: I8d508c3d0f65a022010e74f8edad7ad2cfdc7dee Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/29024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-10-06arch/riscv: Update comment about mstatus initializationJonathan Neuschäfer
coreboot does not set up virtual memory anymore. Change-Id: I231af07b2988e8362d1cdd606ce889fb31136ff1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/28831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-09-14arch/riscv: Only execute on hart 0 for nowPhilipp Hug
Only execute coreboot on hart 0 until synchronisation between hart's is ready. Change-Id: I2181e79572fbb9cc7bee39a3c2298c0dae6c1658 Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/28605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-07-18riscv: add CAR interface Xiang Wang
Add an interface to support cache as ram. Initialize stack pointer for each hart. Change-Id: Ic3920e01dd1a7f047a53de57250589000a111409 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Pass the bootrom-provided FDT to the payloadJonathan Neuschäfer
The RISC-V boot protocol foresees that at every stage boundary (bootrom to boot loader, boot loader -> OS), register a0 contains the Hart ID and a1 contains the physical address of the Flattened Device Tree that the stage shall use. As a first step, pass the bootrom-provided FDT to the payload, unmodified. Change-Id: I468bc64a47153d564087235f1c7e2d10e3d7a658 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-01-16riscv: get SBI calls to workRonald G. Minnich
SBI calls, as it turned out, were never right. They did not set the stack correctly on traps. They were not correctly setting the MIP instead of the SIP (although this was not really well documented). On Harvey, we were trying to avoid using them, and due to a bug in SPIKE, our avoidance worked. Once SPIKE was fixed, our avoidance broke. This set of changes is tested and working with Harvey which, for the first time, is making SBI calls. It's not pretty and we're going to want to rework trap_util.S in coming days. Change-Id: Ibef530adcc58d33e2c44ff758e0b7d2acbdc5e99 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/18097 Tested-by: build bot (Jenkins)
2016-11-02riscv: Add a bandaid for the new toolchainRonald G. Minnich
After I did a new toolchain build, I found the the mhartid register value is wrong for Spike. The docs seem to agree with Spike, not the code the toolchain produces? Until such time as the bitstreams and toolchain can find a way to agree, just hardcode it. We've been playing this game for two years now so this is hardly a new approach. This is intentionally ugly because we really need the toolchains and emulators and bitstreams to sync up, and that's not happening yet. Lowrisc allegedly implements the v1.9 spec but it's PTEs are clearly 1.7. Once it all settles down we can just use constants supplied by the toolchain. I hope the syncup will have happened by the workshop in November. This gets spike running again. Change-Id: If259bcb6b6320ef01ed29a20ce3d2dcfd0bc7326 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17183 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-10-24RISCV: Clean up the common architectural codeRonald G. Minnich
This version of coreboot successfully starts a Harvey (Plan 9) kernel as a payload, entering main() with no supporting assembly code for startup. The Harvey port is not complete so it just panics but ... it gets started. We provide a standard payload function that takes a pointer argument and makes the jump from machine to supervisor mode; the days of kernels running in machine mode are over. We do some small tweaks to the virtual memory code. We temporarily disable two functions that won't work on some targets as register numbers changed between 1.7 and 1.9. Once lowrisc catches up we'll reenable them. We add the PAGETABLES to the memlayout.ld and use _pagetables in the virtual memory setup code. We now use the _stack and _estack from memlayout so we know where things are. As time goes on maybe we can kill all the magic numbers. Change-Id: I6caadfa9627fa35e31580492be01d4af908d31d9 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17058 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-28arch/riscv: Refactor bootblock.SJonathan Neuschäfer
A few things are currently missing: - The trap handler doesn't set the stack pointer, which can easily result in trap loops or memory corruptions. - The SBI trampolin page (as described in version 1.9 of the RISC-V Privileged Architecture Specification), has been removed for now. Change-Id: Id89c859fab354501c94a0e82d349349c29fa4cc6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15591 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-28riscv/bootblock.S: Register machine-mode, not supervisor-mode trap handlerJonathan Neuschäfer
Change-Id: Ic42d8490cc02a3907e2989435aab786f7c0f39c9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15287 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-28arch/riscv: Move _start to the beginning of the bootblockJonathan Neuschäfer
The different entry points (0x100, 0x140, ...), which were defined in the RISC-V Privileged Specification 1.7, aren't used anymore. Instead the Spike bootrom jumps at the start of our image, and traps are handled through mtvec. Change-Id: I865adec5e7a752a25bac93a45654ac06e27d5a8e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15283 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-21riscv-spike: Move coreboot to 0x80000000 (2GiB)Jonathan Neuschäfer
This is where the RAM is (now), on RISC-V. We need to put coreboot.rom in RAM because Spike (at the moment) only supports loading code into the RAM, not into the boot ROM. Change-Id: I6c9b7cffe5fa414825491ee4ac0d2dad59a2d75c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15149 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-04-08Change la to li (load immediate)Ronald G. Minnich
This used to build, but will not with newer toolchains. Change-Id: I0f397839eb85977ba18328b0e32040b15a6c3b0f Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/14296 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-16riscv-memlayout: fix existing memlayout issues, add sbi interfaceThaminda Edirisooriya
Existing memlayout code placed sections in overlapping areas, and would overwrite the payload if it was large enough. Update memlayout.ld in src/mainboard/emulation/spike-riscv to represent the spike emulator, and add sbi interface which now has room into src/arch/riscv/bootblock.S. Add utility code to qemu-riscv, but emulator itself has yet to be updated to new ISA and as such should not be used. Update Makefile to include all the files necessary for sbi interface. Clean up unused include in src/arch/riscv/include/atomic.h and whitespace in src/mainboard/emulation/spike-riscv/memlayout.ld Fixed whitespace issues in spike_util.c Change-Id: Id97fe75e45ac1361005bec6d421756ee3f98a508 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11370 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-08-09riscv-spike: support for Spike emulation of riscvThaminda Edirisooriya
Spike support: QEMU RISCV is broken, and the maintainers at Berkeley are working on it, but at the moment spike is the only way to test on riscv. Add support for spike console output for debugging. Privileged ISA: Update to privileged ISA in RISCV (machine, supervisor, hypervisor, user modes) broke exisitng RISCV asm, and bootblock.S was updated to match the new spec. Clean old assembly [pg: things build with gcc 4.9 now, but don't expect them to work. Hardcoding register names into the assembler language may not be the smartest idea of the RISCV folks.] Change-Id: Ie2c109d3c26712c207512f74f28ce1a925e6e181 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-18riscv: use new-style CBFS header lookupPatrick Georgi
We recently restructured where the CBFS header is stored and how it is looked up, with less magic. The RISC-V port didn't get the memo, so have it follow the pack now. Change-Id: Ic27e3e7f9acd55027e357f2c4beddf960ea02c4d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/9795 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-12-01Add UCB RISCV support for architecture, soc, and emulation mainboard..Ronald G. Minnich
Works in the RISCV version of QEMU. Note that the lzmadecode is so unclean that it needs a lot of work. A cleanup is in progress. We decided in Prague to do this as one thing, because it forms a nice case study of the bare minimum you need to add to get a new architecture going in qemu. Change-Id: If5af15c3a70733d219973e0d032746f8ab027e4d Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7584 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)