summaryrefslogtreecommitdiff
path: root/src/arch
AgeCommit message (Collapse)Author
2013-07-10Wield battle axe at ARM portStefan Reinauer
This patch unfortunately incorporates a number of changes, all of which are making future ARM ports easier. - drop cruft that came in with u-boot - move serial console from mainboard Kconfig to Exynos Kconfig - factor out non-board specific wakeup code - move generic bootblock code from mainboard to Exynos - actually call arch_cpu_init() - remove dead code - fix up copyright messages - remove snow_ prefix from a lot of code to reduce the noise when creating a new mainboard based on that code. Change-Id: Ic05326edf5a7e1a691c5ff841a604cb9e351b562 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3640 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Rename hardwaremain() to main()Stefan Reinauer
... and drop the wrapper on ARMv7 Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3639 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Drop some duplicates of PCI-e config functionsKyösti Mälkki
These are not specific to Intel. Further work needs to be done to combine these with MMCONF_SUPPORT in arch/io.h. Change-Id: Id429db2df8d47433117c21133d80fc985b3e11e4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3502 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Fix MMCONF_SUPPORT_DEFAULT for ramstageKyösti Mälkki
Define at one place whether to use IO 0xcf8/0xcfc or MMIO via MMCONF_BASE_ADDRESS for PCI configuration access funtions in ramstage. The implementation of pci_default_config() always returned with pci_cf8_conf1. This means any PCI configuration access that did not target bus 0 used PCI IO config operations, if PCI MMIO config was not explicitly requested. Change-Id: I3b04f570fe88d022cd60dde8bb98e76bd00fe612 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3606 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-10ARM: Put the ROM stage into the image before other bits.Gabe Black
On ARM, there's frequently some firmware built into the SOC which runs first and which loads other firmware like Coreboot from some other media. To prevent the bootblock from having to know how to find and load the ROM stage from what may be a complicated source (sd card, netbooting, etc.), we can put the ROM stage immediately after the bootblock and ensure that they're both loaded at the same time. This change adjusts the Makefile.inc for ARM so that the ROM stage is put into the image before any other files so that we know it comes first. This changes the behavior of the CONFIG_UPDATE_IMAGE config option used by abuild, although it's not entirely clear whether that's still used. Change-Id: I832386243788156db5f5abbc9760a4e2026cf2cd Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3420 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-06-06qemu: add x86 cpuGerd Hoffmann
This patch adds a qemu x86 cpu chip. It has no initialization function as this isn't needed on virtual hardware. A virtual machine can have pretty much any CPU: qemu emulates a wide range of x86 CPUs (try 'qemu -cpu ? for a list), also with 'qemu -cpu host' the guest will see a cpu which is (almost) identical to the one on the host machine. So I've added X86_VENDOR_ANY as wildcard match for the cpu_table. Change-Id: Ib01210694b09702e41ed806f31d0033e840a863f Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3344 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-04Move the MARK_GRAPHICS_MEM_WRCOMB to x86 architectureRonald G. Minnich
The MARK_GRAPHICS_MEM_WRCOMB was spreading like a cancer since it was defined in sandybridge. It is really more of an x86 thing however, and we now have three systems that can use it. I considered making this more general, since it technically can apply to PTE-based systems like ARM, and maybe we should. But the 'WRCOMB' moniker is usually closely tied to the x86. Change-Id: I3eb6eb2113843643348a5e18e78c53d113899ff8 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3349 Tested-by: build bot (Jenkins)
2013-06-02Provide sane Kconfig default for cmos.default.Denis 'GNUtoo' Carikli
Without that fix we have with CONFIG_USE_OPTION_TABLE: OPTION cmos_layout.bin build/util/nvramtool/nvramtool -y /home/gnutoo/x86/coreboot-alix/src/mainboard/pcengines/alix1c/cmos.layout -L build/cmos_layout.bin make: *** No rule to make target `nvramtool', needed by `build/coreboot.pre1'. Stop. rm build/util/sconfig/sconfig.tab.c build/cbfs/fallback/bootblock.elf build/util/sconfig/lex.yy.c That log was captured with make V=1 but the error also appear with make. Tested on the PC Engines ALIX.1C with the following commit (Change-Id: Ia87b090) [1]: PC Engines ALIX.1C: Add CMOS defaults. [1] http://review.coreboot.org/#/c/3323/ Change-Id: I548005a58f430ed7b6da5249a24bbdcae440a1e9 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3223 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-05-20Drop llshellStefan Reinauer
This feature has not been used and was never fully integrated. In the progress of cleaning up coreboot, let's drop it. Change-Id: Ib40acdba30aef00a4a162f2b1009bf8b7db58bbb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3251 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-16x86: add cache-as-ram migration optionAaron Durbin
There are some boards that do a significant amount of work after cache-as-ram is torn down but before ramstage is loaded. For example, using vboot to verify the ramstage is one such operation. However, there are pieces of code that are executed that reference global variables that are linked in the cache-as-ram region. If those variables are referenced after cache-as-ram is torn down then the values observed will most likely be incorrect. Therefore provide a Kconfig option to select cache-as-ram migration to memory using cbmem. This option is named CAR_MIGRATION. When enabled, the address of cache-as-ram variables may be obtained dynamically. Additionally, when cache-as-ram migration occurs the cache-as-ram data region for global variables is copied into cbmem. There are also automatic callbacks for other modules to perform their own migration, if necessary. Change-Id: I2e77219647c2bd2b1aa845b262be3b2543f1fcb7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3232 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-14x86: add thread supportAaron Durbin
Thread support is added for the x86 architecture. Both the local apic and the tsc udelay() functions have a call to thread_yield_microseconds() so as to provide an opportunity to run pending threads. Change-Id: Ie39b9eb565eb189676c06645bdf2a8720fe0636a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3207 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-14coreboot: add thread cooperative multitaskingAaron Durbin
The cooperative multitasking support allows the boot state machine to be ran cooperatively with other threads of work. The main thread still continues to run the boot state machine (src/lib/hardwaremain.c). All callbacks from the state machine are still ran synchronously from within the main thread's context. Without any other code added the only change to the boot sequence when cooperative multitasking is enabled is the queueing of an idlle thread. The idle thread is responsible for ensuring progress is made by calling timer callbacks. The main thread can yield to any other threads in the system. That means that anyone that spins up a thread must ensure no shared resources are used from 2 or more execution contexts. The support is originally intentioned to allow for long work itesm with busy loops to occur in parallel during a boot. Note that the intention on when to yield a thread will be on calls to udelay(). Change-Id: Ia4d67a38665b12ce2643474843a93babd8a40c77 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3206 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10Drop prototype guarding for romccStefan Reinauer
Commit "romcc: Don't fail on function prototypes" (11a7db3b) [1] made romcc not choke on function prototypes anymore. This allows us to get rid of a lot of ifdefs guarding __ROMCC__ . [1] http://review.coreboot.org/2424 Change-Id: Ib1be3b294e5b49f5101f2e02ee1473809109c8ac Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3216 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08Drop CONFIG_AP_CODE_IN_CARStefan Reinauer
This option has not been enabled on any board and was considered obsolete last time it was touched. If we need the functionality, let's fix this in a generic way instead of a K8 specific way. This was mostly a speedup hack back in the day. Change-Id: Ib1ca248c56a7f6e9d0c986c35d131d5f444de0d8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-08copy_and_run: drop boot_complete parameterStefan Reinauer
Since this parameter is not used anymore, drop it from all calls to copy_and_run() Change-Id: Ifba25aff4b448c1511e26313fe35007335aa7f7a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08hardwaremain: drop boot_complete parameterStefan Reinauer
it has been unused since 9 years or so, hence drop it. Change-Id: I0706feb7b3f2ada8ecb92176a94f6a8df53eaaa1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3212 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-07x86 I/O APIC: Dump I/O APIC regs in `ioapic.c`Paul Menzel
Some southbridges have code in their `lpc.c` files to dump the I/O APIC registers. printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); for (i=0; i<3; i++) { *ioapic_index = i; printk(BIOS_SPEW, " reg 0x%04x:", i); reg32 = *ioapic_data; printk(BIOS_SPEW, " 0x%08x\n", reg32); } Add similar code to `src/arch/x86/lib/ioapic.c` so all boards using the function `set_ioapic_id()` get the debug feature and the other boards can be more easily adapted in follow-up patches. Change-Id: Ic59c4c2213ed97bdf3798b3dc6e7cecc30e135d8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3184 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-05-07x86 I/O APIC: Make functions `io_apic_{read,write}()` publicPaul Menzel
Some LPC initialiation can save some lines of code when being able to use the functions `io_apic_read()` and `io_apic_write()`. As these two functions are now public, remove them from the generic driver as otherwise we get a build errors like the following. […] Building roda/rk9; i386: ok, using i386-elf-gcc Using payload /srv/jenkins/payloads/seabios/bios.bin.elf Creating config file... (blobs, ccache) ok; Compiling image on 4 cpus in parallel .. FAILED after 12s! Log excerpt: coreboot-builds/roda_rk9/arch/x86/lib/ramstage.o: In function `io_apic_write': /srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/arch/x86/lib/ioapic.c:32: multiple definition of `io_apic_write' coreboot-builds/roda_rk9/drivers/generic/ioapic/ramstage.o:/srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/drivers/generic/ioapic/ioapic.c:22: first defined here collect2: error: ld returned 1 exit status make: *** [coreboot-builds/roda_rk9/generated/coreboot_ram.o] Error 1 make: *** Waiting for unfinished jobs.... […] Change-Id: Id600007573ff011576967339cc66e6c883a2ed5a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3180 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-05-01armv7: invalidate TLB entries as they are added/modifiedDavid Hendricks
The old approach was to invalidate the entire TLB every time we set up a table entry. This worked because we didn't turn the MMU on until after we had set everything up. This patch uses the TLBIMVAA wrapper to invalidate each entry as it's added/modified. Change-Id: I27654a543a2015574d910e15d48b3d3845fdb6d1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3166 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-01ARMV7: add a function to disable MMU entriesRonald G. Minnich
It is useful to be able to lock out certain address ranges, NULL being the most important example. void mmu_disable_range(unsigned long start_mb, unsigned long size_mb) will allow us to lock out selected virtual addresses on MiB boundaries. As in other ARM mmu functions, the addresses and quantities are in units of MiB. Change-Id: If516ce955ee2d12c5a409f25acbb5a4b424f699b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3160 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-01armv7: add wrapper for tlbimvaaDavid Hendricks
This adds an inline wrapper for the TLBIMVAA instruction (invalidate unified TLB by MVA, all address space identifiers). Change-Id: Ibcd289ecedaba8586ade26e36c177ff1fcaf91d3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3161 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-01x86: use boot state callbacks to disable rom cacheAaron Durbin
On x86 systems there is a concept of cachings the ROM. However, the typical policy is that the boot cpu is the only one with it enabled. In order to ensure the MTRRs are the same across cores the rom cache needs to be disabled prior to OS resume or boot handoff. Therefore, utilize the boot state callbacks to schedule the disabling of the ROM cache at the ramstage exit points. Change-Id: I4da5886d9f1cf4c6af2f09bb909f0d0f0faa4e62 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3138 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01coverage: use boot state callbacksAaron Durbin
Utilize the static boot state callback scheduling to initialize and tear down the coverage infrastructure at the appropriate points. The coverage initialization is performed at BS_PRE_DEVICE which is the earliest point a callback can be called. The tear down occurs at the 2 exit points of ramstage: OS resume and payload boot. Change-Id: Ie5ee51268e1f473f98fa517710a266e38dc01b6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3135 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01acpi: split resume check and actual resume codeAaron Durbin
It's helpful to provide a distinct state that affirmatively describes that OS resume will occur. The previous code included the check and the actual resuming in one function. Because of this grouping one had to annotate the innards of the ACPI resume path to perform specific actions before OS resume. By providing a distinct state in the boot state machine the necessary actions can be scheduled accordingly without modifying the ACPI code. Change-Id: I8b00aacaf820cbfbb21cb851c422a143371878bd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3134 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01boot state: schedule static callbacksAaron Durbin
Many of the boot state callbacks can be scheduled at compile time. Therefore, provide a way for a compilation unit to inform the boot state machine when its callbacks should be called. Each C module can export the callbacks and their scheduling requirements without changing the shared boot flow code. Change-Id: Ibc4cea4bd5ad45b2149c2d4aa91cbea652ed93ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3133 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-26armv7: invoke intermediate build rulesDavid Hendricks
This adds $$(INTERMEDIATE) as a pre-requisite for coreboot.rom on armv7. It is modeled after the $(obj)/coreboot.rom rule for x86. Change-Id: I483a88035fa2288829b6e042e51ef932c8c4f23c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2095 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-18spkmodem consoleVladimir Serbinenko
Change-Id: Ie497e4c8da05001ffe67c4a541bd24aa859ac0e2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/2987 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-17armv7/exynos5250: Deprecate sdelay in favor of udelayDavid Hendricks
This gets rid of the clock-tick based sdelay in favor of udelay(). udelay() is more consistent and easier to work with, and this allows us to carry one less variation of timers (and headers and sources...). Every 1 unit in the sdelay() argument was assumed to cause a delay of 2 clock ticks (@1.7GHz). So the conversion factor is roughly: sdelay(N) = udelay(((N * 2) / 1.7 * 10^9) * 10^6) = udelay((N * 2) / (1.7 * 10^3)) The sdelay() periods used were: sdelay(100) --> udelay(1) sdelay(0x10000) --> udelay(78) (rounded up to udelay(100)) There was one instance of sdelay(10000), which looked like sort of a typo since sdelay(0x10000) was used elsewhere. sdelay(10000) should approximate to about 12us, so we'll stick with that for now and leave a note. Change-Id: I5e7407865ceafa701eea1d613bbe50cf4734f33e Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3079 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-13Exynos5250: add a microsecond timerRonald G. Minnich
Add a microsecond timer, its declaration, the function to start it, and its usage. To start it, one calls timer_start(). From that point on, one can call timer_us() to find microseconds since the timer was started. We show its use in the bootblock. You want it started very early. Finally, the delay.h change having been (ironically) delayed, we create time.h and have it hold one declaration, for the timer_us() and timer_start() prototype. We feel that these two functions should become the hardware specific functions, allowing us to finally move udelay() into src/lib where it belongs. Change-Id: I19cbc2bb0089a3de88cfb94276266af38b9363c5 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3073 Tested-by: build bot (Jenkins)
2013-04-11ARM: Unmask aborts very early in the bootblock.Gabe Black
It's better to recognize aborts when they occur than to mask them to discover them later without knowing where they actually came from. Change-Id: Ic8f5321415f411afac94b5ef9dd440790df6d82c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3065 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-10armv7: replace read/write macros with inlinesDavid Hendricks
This enables type checking for safety as to help prevent errors like http://review.coreboot.org/#/c/3038/ . Now compilation fails if the wrong type is passed into readb/readw/readl/writeb/writew/writel or other macros in io.h. This also deprecates readw/writew. The previous definition was 16-bits which is incorrect since wordsize on ARMv7 is 32-bits and there was only 1 instance of writew (#if 0'd anyway). Going forward we should always use read{8,16,32} and write{8,16,32} where N specifies the exact length rather than relying on ambiguous definition of wordsize. Since many macros relied on __raw_*, which were basically the same (minus data memory barrier instructions), this patch also gets rid of __raw_*. There were parts of the code which ended up using these macros consecutively, for example: setbits_le32(&regs->ch_cfg, SPI_CH_RST); clrbits_le32(&regs->ch_cfg, SPI_CH_RST); In such cases the safe versions of readl() and writel() should be used anyway. Note: This also fixes two dubious casts as to avoid breaking compilation. Change-Id: I8850933f68ea3a9b615d00ebd422f7c242268f1c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3045 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08armv7: specify condition code for msr instructionDavid Hendricks
This adds condition codes when using the msr instruction. Although described as "optional" in the Cortex-A series programmer's guide, our experience with using the msr instruction in the payload suggests that the condition code is not optional and that this only worked in coreboot (and u-boot) because the processor comes up in SVC32 mode. (credit to Gabe Black for finding this, I'm only uploading the patch) Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I0aa4715ae415e1ccc5719b7b55adcd527cc1597b Reviewed-on: http://review.coreboot.org/3037 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-03Add PXE ROM selection to Kconfig menuSiyuan Wang
Adding a pxe rom manually is inconvenient. With this patch, PXE ROM can be added automatically by selecting PXE_ROM in Kconfig. I have tested this patch on AMD Parmer and Thatcher with iPXE. iPXE would be a boot device in Seabios when pressing F12. iPXE works well with coreboot and Seabios. Change-Id: I2c4fc73fd9ae6c979f0af2290d410935f600e2c8 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3013 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01lynxpoint: Move ACPI NVS into separate CBMEM tableDuncan Laurie
The ACPI NVS region was setup in place and there was a CBMEM table that pointed to it. In order to be able to use NVS earlier the CBMEM region is allocated for NVS itself during the LPC device init and the ACPI tables point to it in CBMEM. The current cbmem region is renamed to ACPI_GNVS_PTR to indicate that it is really a pointer to the GNVS and does not actually contain the GNVS. Change-Id: I31ace432411c7f825d86ca75c63dd79cd658e891 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2970 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01boot: add disable_cache_rom() functionAaron Durbin
On certain architectures such as x86 the bootstrap processor does most of the work. When CACHE_ROM is employed it's appropriate to ensure that the caching enablement of the ROM is disabled so that the caching settings are symmetric before booting the payload or OS. Tested this on an x86 machine that turned on ROM caching. Linux did not complain about asymmetric MTRR settings nor did the ROM show up as cached in the MTRR settings. Change-Id: Ia32ff9fdb1608667a0e9a5f23b9c8af27d589047 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-30x86: Drop BOARD_HAS_FADTKyösti Mälkki
There is a wildcard rule to include mainboard/fadt.c. Change-Id: I7f59d6b241c683b62c2c41c5795e45184882635e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2940 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-30armv7: change some unsigned ints to uint32_tDavid Hendricks
Use register-sized types in case the inline assembler doesn't do so automatically. Change-Id: I3202ba972ef2548323fe557f45dc4b0b1cf6c818 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2983 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: remove loop from dcache_mmu_disable()David Hendricks
dcache_mmu_disable() no longer needs to have its own iterative loop to select each cache level of cache since dcache_clean_invalidate_all() does that now. Change-Id: I5ca273f98943981b943c1c1622f4574d7133fb50 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2967 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: update sync barrier usage in dcache_op_set_way()David Hendricks
This moves the dsb() before the loop to sync any outstanding memory accesses, and adds an isb() after the loop to ensure all outstanding instructions are completed. Change-Id: I1a11b39f104ae780370cfd2db3badcf4e91dc017 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2929 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29armv7: set cache level explicitly for dcache/unified cache caseDavid Hendricks
This adds a missing CSSELR write in the case of a dcache or unified cache being invalidated by armv7_invalidate_caches(), ensuring that all levels of dcache/unified cache are invalidated as expected when the function is called. Change-Id: Ie90184bf8a8181afa3afe0786897455b30b7f022 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2947 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: invalidate TLB after changing translation table entriesDavid Hendricks
This adds a call to tlb_invalidate_all() after configuring a range of memory. Change-Id: I558402e7e54b6bf9e0b013f153d9b84c0873a6cf Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2946 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: iterate thru all levels when doing dcache opsDavid Hendricks
This makes dcache maintenance functions operate on all levels of cache instead of just the current one. Change-Id: I2708fc7ba6da6740dbdfd733d937e7c943012d62 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2945 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: add functions for reading/writing L2CTLRDavid Hendricks
This adds simple accessor functions for reading/writing L2CTLR. Change-Id: I2768d00d5bb2c43e84741ccead81e529dac9254d Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2948 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29armv7: use stdint.h in cache and MMU filesDavid Hendricks
This makes it easier to copy + paste code into libpayload since libpayload since both coreboot and libpayload have stdint.h and it defines the types needed. Change-Id: Ifa55f04a9bdddd17bc1a2679321a6744c75f25a8 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2944 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29armv7: added paranoia for cache libraryDavid Hendricks
This adds some paranoia to cache manipulation routines: - "memory" is added to the clobber list for functions which clean and/or invalidate dcache or TLB entries. - Remove unneeded clobber list for read_sctlr() Change-Id: Iaa82ef78bfdad4119f097c3b6db8219f29f832bc Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2928 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-28armv7: clean+invalidate all cache levels when disabling MMUDavid Hendricks
This iterates thru all cache levels and cleans + invalidates all data and unified caches before disabling dcache and MMU. Change-Id: I8a671b4c90d7b88b8d0a95947bfa17f912cebaa2 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2930 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-28armv7: cosmetic changes to dcache_op_mva()David Hendricks
This is just a cosmetic change to dcache_op_mva() to (hopefully) make it a easier to follow and more difficult to screw up. Change-Id: Ia348b2d58f2f2bf5c3cafabcfba06bc411937dba Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2927 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-28armv7: fix a bad variable assignmentDavid Hendricks
'<' was used when '<<' is needed. Oops! Change-Id: I8451f76888e86219df16b50739cd2c8db80dcb14 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2941 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-28armv7: pass incremented value to dccimvacDavid Hendricks
This passes the correct value into dccimvac. Change-Id: I6098440ea48a9b6429380d5913fce6d36e3afb41 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2926 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-26armv7: fixes for dcache_op_by_mva()David Hendricks
This fixes a couple issues with dcache_op_by_mva(): - Add missing data and instruction sync barriers. - Removes unneded -1 from loop terminating condition. Change-Id: I098388614397c1e53079c017d56b1cf3ef273676 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2913 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 07:13:15 +0000