summaryrefslogtreecommitdiff
path: root/src/console
AgeCommit message (Collapse)Author
2015-03-10console/Kconfig: Enable CBMEM console by defaultPaul Menzel
Currently on AMD boards no romstage messages can be saved in CBMEM, so only messages from ramstage on will be stored in CBMEM. Other than that nothing changes. Enabling CBMEM console by default does not noticeably decrease boot time as the messages are directly written to CAR or RAM. The board status script under `util/board_status/` reads the coreboot messages from CBMEM, which are then uploaded to the board status repository. With CBMEM console disabled by default, currently no coreboot console messages are uploaded to the board status repository, although it is important to have those. Enabling CBMEM console by default improves this situation, so that for all boards at least ramstage messages are stored in the board status repository. Change-Id: I8d5a58c078325c43a0317bcfaafc722d039aab0b Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5350 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2015-03-10x86 cache-as-ram: Remove BROKEN_CAR_MIGRATE optionKyösti Mälkki
This was added to handle cases of Intel FSP platforms that had EARLY_CBMEM_INIT but could not migrate CAR variables to CBMEM. These boards were recently fixed. To support combination of EARLY_CBMEM_INIT without CAR migration was added maintenance effort with little benefits. You had no CBMEM console for romstage and the few timestamps you could store were circulated via PCI scratchpads or CMOS nvram. Change-Id: I5cffb7f2b14c45b67ee70cf48be4d7a4c9e5f761 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8636 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-03-10cbmem console: Allow the cbmem console on non-x86 systems again.Gabe Black
If it's not supported on a particular board, either the build will fail or checks within the cbmem console itself should detect the problem. There shouldn't be random memory corruption any more. BUG=None TEST=Built with CONSOLE_CBMEM enabled on nyan and saw that it was actually enabled. BRANCH=None Original-Change-Id: Id6c8c7675daafe07aa4878cfcf13faefe576e520 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193167 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 20b486443bfc2d93d72bbc9e496023a00ab9ab30) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I39fbcdff61f6d8f520f2e9d7612dee78e97898b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7748 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-04Add stage information to coreboot bannerStefan Reinauer
As a convenience, print the actual stage name when entering a stage. Also unify the banner between bootblock / romstage and ramstage. No reason for two different occurences. Instead of this: coreboot-4.0 Tue May 13 14:13:37 PDT 2014 starting... [..] coreboot-4.0 Tue May 13 14:13:37 PDT 2014 starting... [..] coreboot-4.0 Tue May 13 14:13:37 PDT 2014 booting... you will see this: coreboot-4.0 Tue May 13 14:13:37 PDT 2014 bootblock starting... [..] coreboot-4.0 Tue May 13 14:13:37 PDT 2014 romstage starting... [..] coreboot-4.0 Tue May 13 14:13:37 PDT 2014 ramstage starting... Roughly based on: https://chromium-review.googlesource.com/199671 Change-Id: Id5894535e0551d113c80e4ff0514287391be1bef Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/8578 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-01-27CBMEM console: Fix and enhance pre-RAM supportKyösti Mälkki
Use the value of CONSOLE_PRERAM_BUFFER_SIZE to determine if we can do CBMEM console in bootblock and romstage. Kconfig forces it to zero if _BASE is unset or we cannot do CAR migration on x86. Add CBMEM console to bootblock, except for x86. Only one of bootblock and romstage clears the pre-RAM buffer. To start with empty console log on S3 wakeup, ramstage now clears previous contents of CBMEM buffer if there was no pre-RAM buffer. Unify Kconfig variable naming. TODO: ARM configurations do not define PRERAM_BUFFER_BASE values. Change-Id: I70d82da629529dbfd7bc9491223abd703cbc0115 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7862 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2015-01-27vboot2: implement select_firmware for pre-romstage verificationDaisuke Nojiri
This patch has a basic structure of vboot2 integration. It supports only Nyans, which have bootblock architecture and romstage architecture are compatible from linker's perspective. TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze. BUG=None BRANCH=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: I4bbd4d0452604943b376bef20ea8a258820810aa Original-Reviewed-on: https://chromium-review.googlesource.com/204522 Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit a6bce0cbed34def60386f3d9aece59e739740c58) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I63ddfbf463c8a83120828ec8ab994f8146f90001 Reviewed-on: http://review.coreboot.org/8160 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-01-09misc: Drop print_ implementation from non-romcc boardsStefan Reinauer
Because we had no stack on romcc boards, we had a separate, not as powerful clone of printk: print_*. Back in the day, like more than half a decade ago, we migrated a lot of boards to printk, but we never cleaned up the existing code to be consistent. Instead, we worked around the problem with a very messy console.h (nowadays the mess is hidden in romstage_console.c and early_print.h) This patch cleans up the generic code pieces to use printk() on all non-ROMCC boards. Our two remaining ROMCC boards are fixed up in this commit: bifferos/bifferboard and dmp/vortex86ex. Change-Id: I16676eeabe5c892c8e3c9f3c0cd3bae2e8fd74b6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/8115 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Andrew Wu <arw@dmp.com.tw> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-05ipq8064: prepare UART driver for use in corebootVadim Bendebury
These driver needs to be in src/lib, and the include file needs to be renamed to avoid collision with the top level uart.h. BUG=chrome-os-partner:27784 TEST=emerge-storm coreboot still works Original-Change-Id: Ie12f44e055bbef0eb8b1a3ffc8d6742e7a446942 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196393 (cherry picked from commit c5618fd418642f5b009582f5f6bc51f7c9d54bec) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5e25ae350ac5e71b47a0daef078b03cc5ac35401 Reviewed-on: http://review.coreboot.org/7270 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-01Add UCB RISCV support for architecture, soc, and emulation mainboard..Ronald G. Minnich
Works in the RISCV version of QEMU. Note that the lzmadecode is so unclean that it needs a lot of work. A cleanup is in progress. We decided in Prague to do this as one thing, because it forms a nice case study of the bare minimum you need to add to get a new architecture going in qemu. Change-Id: If5af15c3a70733d219973e0d032746f8ab027e4d Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7584 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-11-30Replace hlt() loops with halt()Patrick Georgi
Change-Id: I8486e70615f4c404a342cb86963b5357a934c41d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7606 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-20Replace includes of build.h with version.hKyösti Mälkki
As build.h is an auto-generated file it was necessary to add it as an explicit prerequisite in the Makefiles. When this was forgotten abuild would sometimes fail with following error: fatal error: build.h: No such file or directory Fix this error by compiling version.c into all stages. Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7510 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-19console: Isolate console_init() for ROMCCKyösti Mälkki
Change-Id: I623643834fb1c6af166a851fec7e31447944f0b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7509 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-12Copy u-boot sources as is and modify the tree to still buildVadim Bendebury
This patch brings in ipq806x source files from the vendor's u-boot tree as it was published in the 'cs_banana' release. The following files are being copied: arch/arm/cpu/armv7/ipq/clock.c => src/soc/qualcomm/ipq806x/clock.c arch/arm/cpu/armv7/ipq/gpio.c => src/soc/qualcomm/ipq806x/gpio.c arch/arm/cpu/armv7/ipq/timer.c => src/soc/qualcomm/ipq806x/timer.c arch/arm/include/asm/arch-ipq806x/clock.h => src/soc/qualcomm/ipq806x/clock.h arch/arm/include/asm/arch-ipq806x/gpio.h => src/soc/qualcomm/ipq806x/gpio.h arch/arm/include/asm/arch-ipq806x/gsbi.h => src/soc/qualcomm/ipq806x/gsbi.h arch/arm/include/asm/arch-ipq806x/iomap.h => src/soc/qualcomm/ipq806x/iomap.h arch/arm/include/asm/arch-ipq806x/timer.h src/soc/qualcomm/ipq806x/timer.h arch/arm/include/asm/arch-ipq806x/uart.h => src/soc/qualcomm/ipq806x/uart.h board/qcom/ipq806x_cdp/ipq806x_cdp.c => src/mainboard/google/storm/cdp.c board/qcom/ipq806x_cdp/ipq806x_cdp.h => src/soc/qualcomm/ipq8064/cdp.h drivers/serial/ipq806x_uart.c => src/console/ipq806x_console.c Note that local timer.c gets overwritten with the original version. To prevent a build breakage some shortly to be reverted modifications had to be made to src/soc/qualcomm/ipq806x/Makefile.inc and src/soc/qualcomm/ipq806x/cbfs.c. BRANCH=none BUG=chrome-os-partner:27784 TEST='emerge-storm coreboot' still succeeds Original-Change-Id: I3f50bfbec2e18a3b5d2c640cff353a26f88c98c1 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193722 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 3c9c2ede7e97e330cad2c2f3e557cc9bcdaecdcc) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia7bc66cecfc16f1dd4a9f3cb9840cbe91878adf4 Reviewed-on: http://review.coreboot.org/7263 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-07cbmem console: Locate the preram console with a symbol instead of a section.Gabe Black
On non-x86 systems, the location of the preram CBMEM console may not be in a predictable place relative to other things in the linker script. That makes it difficult to work with as its own section because the linker will complain if you try to move backwards as it lays out memory. If the console header is treated as an actual blob of memory which has to be put in the image, we'd have to predict where to put it so that it isn't before something with a lower address or after something with a higher address. Symbols, on the other hand, can be defined arbitrarily. Change-Id: I3257b981eee0c15bb997a9f2c55a03494c6ec6f0 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/193164 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit a492761c27076bcac080013d509ae4aafd6dc3e3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7013 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-09-15arm: Remove CAR_MIGRATE Kconfig and associated cruftJulius Werner
This is essentially a revert of commit 10bd772d. The CAR_MIGRATE mechanism is only useful to migrate variables from a special region (e.g. cache as RAM) into DRAM-backed CBMEM between different parts of the romstage (it does not persist into ramstage). Since ARM devices use SRAM for which there is no reason to become inaccessible in later parts of the romstage, this mechanism isn't useful for them. Removing it makes the romstage.ld script much simpler, which has the nice side-effect of putting the BSS at the end of the memory image (so that cbfstool can actually figure out that it doesn't need to be part of the ROM image). Old-Change-Id: I50e91d8bd51b5deb19446d9da48699edecbef6ea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176761 Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit ebfd698e57c902e2f39a0cfc1bc2b02665e47ec6) console: Make cbmem depend on x86. The cbmem implementation isn't supported on anything other than x86 right now and actually causes memory corruption on ARM machines. Until that's fixed, this will prevent people from turning it on and causing hard to track down errors. Old-Change-Id: I00e8aacf008acfe2f76d4eab82570f7c1cc89cab Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/191107 Reviewed-by: Julius Werner <jwerner@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit e54f16e346a7f2c66d802fb78a6b24e53b732b83) Squashed two related commits for cbmem support on arm. Change-Id: I2be48cea348ee5dc8ca3632d743500aa111bab08 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6888 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-09-14cbmemc: Bump default to 128KVladimir Serbinenko
board_status shows that truncation of few KiB is pretty common. So bump this value. Change-Id: I78a16974846a59ee4eae782380e6d01d2fa324f2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6902 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-08ARM: Generalize armv7 as arm.Gabe Black
There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2014-08-25UART 8250: Unconditionally provide register constants and use UART8250 prefix.Gabe Black
The register indexes and bitfield masks were guarded by the UART8250 config options, but it might be (is) necessary to use them in a driver that is UART8250 like without actually using the 8250 driver itself. To avoid any name collision with other drivers, also change the constant prefix from UART_ to UART8250_. Change-Id: Ie606d9e0329132961c3004688176204a829569dc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171336 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit a93900be8d8a8260db49e30737608f9161fbf249) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6715 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-18console: conditionally include console in bootblockStefan Reinauer
Right now some console specific objects are included in the bootblock even if CONFIG_BOOTBLOCK_CONSOLE is disabled while others are not. Make all of them conditional and also fix a preprocessor misuse in bootblock_simple.c and a stray (useless) die() in the Exynos wakeup code that made inclusion of those files necessary. Change-Id: Ia7f9d17654466f199b0e13afbdc9e14c9706530f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168772 Reviewed-by: David Hendrix <dhendrix@chromium.org> (cherry picked from commit 855da1f07b52898c7edcaffe5baabe9d485bbd83) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6637 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-07-30src/console/Kconfig: Fix choice for showing POST codes on consoleDaniele Forsi
Use CONSOLE_POST because the preprocessor conditional in post_code() in src/console/post.c depends on it, while POST_IO is used in another conditional for sending the codes to an I/O port. Change-Id: Ia044cffb5f0aad0f8b2bb04faa12df11a705757a Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6416 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-23src/.../Kconfig: various small fixes to textsDaniele Forsi
Fixed spelling and added empty lines to separate the help from the text automatically added during make menuconfig. Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6313 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-27src/console/post.c: Sanitize headers from preprocessor abuseEdward O'Callaghan
Continuing on from the rational given in: a173a62 Remove guarding #includes by CONFIG_FOO combinations Change-Id: I524713b21684f6fa99355614a1ab38aee9975790 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6091 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-06-25src/console: Sanitize headers and IS_ENABLED usageEdward O'Callaghan
Alphabetise headers and remove any #if CONFIG_ guards around them. Use #if IS_ENABLED(CONFIG_FOO) over #if CONFIG_FOO where applicable. Change-Id: I2a616bcfb8470a1fa21c9e26271e81cca835272a Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6057 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26console: Add console for GDBKyösti Mälkki
Connection of UARTs to GDB stub got lost in the console transition process, bring it back. In theory, GDB stub should work also over usbdebug, but that solution is not really tested at all yet. Change-Id: I90e05e8132889e788b92e055ee191f35add43bbc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5343 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-30console: Fix UART selection promptKyösti Mälkki
Without this change, removal of default UART_FOR_CONSOLE entries under mainboard/ Kconfig will remove this option entirely from created .config file. Change-Id: I11422ddb8c51abca177f999936c995ae0c91c459 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5626 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-04-30console: Drop EARLY_CONSOLE optionKyösti Mälkki
We have means to easily disable a specific console in romstage if necessary, so this global option makes little sense. The option was initially introduced as a work-around for build issues around CACHE_AS_RAM, ROMCC and ARCH_ARMV7 dependencies for UARTs. Change-Id: I797bdd11a48ddd813d3ee7ccef9a0c050f16f669 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5607 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-30uart: Support multiple portsKyösti Mälkki
The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-18console: Simplify the enable rulesKyösti Mälkki
Consoles on CBMEM and USB have somewhat complex rules and dependencies when they can be active. Use simple variables to test which stage of boot is being built for each console. Change-Id: I2489e7731d07ca7d5dd2ea8b6501c73f05d6edd8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-04-18console: Split ROMCC helpersKyösti Mälkki
These are potentially useful with GDB or SerialICE too. Also it reduces the amount of actual code we put in romcc_console. Change-Id: Id8c56e979660ad9f4eef39c648f68c7ec60edfba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5339 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18console: Use romstage code for ramstage and SMMKyösti Mälkki
Console is arch-agnostic and there is no need for separate implementations for romstage and ramstage. For SMM there is console only if DEBUG_SMI is selected. Change-Id: I7028eeeff8bfbb9c8552972436b29a7508834d87 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5338 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-18console: Drop driver list in ramstageKyösti Mälkki
This framework was only available in ramstage. So we had to define console output functions separately for bootblock, romstage and SMM. Follow-up patches will re-enable all the consoles removed here, in a more flexible fashion, and with less lines-of-code and copy-paste. Also the driver list is not in a well-defined order and some of the loops could exit without visiting all drivers. NOTE: This build has no console in ramstage. Change-Id: Iaddc495aaca37e2a6c2c3f802a0dba27bf227a3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5337 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-09console: Remove old fix for DEBUG_SMIKyösti Mälkki
No longer needed as wrap_putchar() survives SMM relocation to TSEG. Change-Id: I6143844b0b9902ef63baf3e5781a5dc4f54234be Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5335 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Simplify vtxprintfKyösti Mälkki
We do not need ROMCC support here and using wrappers for console_tx_byte we can simplify this code. Change-Id: I7f3b5acdfd0bde1d832b16418339dd5e232627e7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5334 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Move newline translation outside console_tx_byteKyösti Mälkki
This gives us completely transparent low-level function to transmit data. Change-Id: I706791ff43d80a36a7252a4da0e6f3af92520db7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5336 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Add printk helper for ChromeOSKyösti Mälkki
Do not expose console_tx_flush() to ChromeOS as that function is part of lower-level implementation. Change-Id: I1e31662da88a60e83f8e5d307a4b53441c130aab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5347 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Hide global console_loglevelKyösti Mälkki
Change-Id: I7bdc468bc3f74516abb2c583bdb5b6d7555d987c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5333 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Unify do_printk()Kyösti Mälkki
Change-Id: I6c50e47d9d2d0d1f42beee477e49b2a0054d1786 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5332 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09console: Split console_init()Kyösti Mälkki
Splitting the version prompt satisfies some requirements ROMCC sets for the order in which we include source files. Also GDB stub will need console hardware before entering main(). Change-Id: Ibb445a2f8cfb440d9dd69cade5f0ea41fb606f50 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5331 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-09OxPCIe uart: Split PCI bridge controlKyösti Mälkki
None of the PCI bridge management here is specific to the PCI UART device/function. Also the Kconfig variable defaults are not globally valid, fill samsung/lumpy with working values. Change-Id: Id22631412379af1d6bf62c996357d36d7ec47ca3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5237 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-09uart: Redefine Kconfig optionsKyösti Mälkki
Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-16Make POST device configurable.Idwer Vollering
Change-Id: If92b50ab3888518228d2d3b76f5c50c4aef968dd Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4561 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-04console: Use single driver entry for UARTsKyösti Mälkki
UARTs now have unified prototypes and can use a single entry in the list of drivers for ramstage. Change-Id: I315daaf9a83cfa60f1a270146c729907a1d6d45b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5308 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04usbdebug: Move Kconfig under drivers/usbKyösti Mälkki
This menu may become a bit more complicated with addition of new USB hardware so move it out of console/. Change-Id: Ieb330675b9227a3e53d093f7c2b5a65e3842dc82 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5307 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04SMM: Only have console with DEBUG_SMIKyösti Mälkki
Existing code compiled serial communication and printk() for SMM even when DEBUG_SMI was not selected. Change-Id: Ic5e25cd7453cb2243f7ac592b093fba752a299f7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5142 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-03-04uart8250mem: Unify calls with generic UARTKyösti Mälkki
NOTE: UART base for SMM continues to be broken, as it does not use the address resource allocator has assigned. Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart8250io: Unify calls with generic UARTKyösti Mälkki
Change-Id: I6d56648e56f2177e1d5332497321e718df18300c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04console: Fix includesKyösti Mälkki
Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04option: Add arch-agnostic get_option()Kyösti Mälkki
We should not have pc80/ includes in console/. Change-Id: Id7da732b1ea094be01f45f9dbb49142f4e78f095 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5157 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-20usbdebug: Unify console APIKyösti Mälkki
Struct dbgp_pipe would not be suitable for use with xHCI. Just use an index, it is easy to setup in Kconfig if our future debug setup has separate pipes for console output and debugging/traceings. Change-Id: Icbbd28f03113b208016f80217ab801d598d443a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5227 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-19printk: support and use %hh prefixPatrick Georgi
clang complains otherwise. Change-Id: I2ac98d7147ecd3d7064f17f8c9d214d44baedf97 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4717 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 02:21:53 +0000