summaryrefslogtreecommitdiff
path: root/src/cpu/samsung
AgeCommit message (Expand)Author
2013-04-10GOOGLE/SNOW: add edp support to ramstageRonald G. Minnich
2013-04-10exynos5-common: Enable fimd_bypass and minor cleanupRonald G. Minnich
2013-04-10armv7: replace read/write macros with inlinesDavid Hendricks
2013-04-10exynos5: Re-factor I2C codeDavid Hendricks
2013-04-09replace device/i2c.h with simpler versionDavid Hendricks
2013-04-08exynos5250: add missing address-of operator in UART driverDavid Hendricks
2013-04-08snow/exynos5250: move board-specific power stuff to mainboard dirDavid Hendricks
2013-04-06exynos5250: add a chip.h file for the display register settingsRonald G. Minnich
2013-04-05exynos5-common: get rid of displayport trial codeRonald G. Minnich
2013-03-29exynos5250: Add function for configuring L2 cacheDavid Hendricks
2013-03-27exynos5250: assign RAM resources in cpu_init()David Hendricks
2013-03-26Revert "samsung/exynos5: add resource functions for the display port"David Hendricks
2013-03-26samsung/exynos5: add resource functions for the display portRonald G. Minnich
2013-03-19armv7/exynos/snow: new cache maintenance APIDavid Hendricks
2013-03-14exynos5250: add RAM resource beginning at physical addressDavid Hendricks
2013-03-13exynos5250/snow: enable branch predictionDavid Hendricks
2013-03-13exynos5250: Don't set PS_HOLD in bootblock_cpu_initDavid Hendricks
2013-03-13exynos5250/snow: call PMIC's power_init() functionDavid Hendricks
2013-03-07exynos5: add GPIO port enumsDavid Hendricks
2013-03-06samsung/exynos5: add display port and framebuffer defines and initializationRonald G. Minnich
2013-03-04ARM: remove code that is IMHO a dangerous designRonald G. Minnich
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
2013-02-20Whitespace: Replace tab character in license text with two spacesPaul Menzel
2013-02-20armv7: Don't let users set ram parameters that are fixed in hardware.Ronald G. Minnich
2013-02-20ARMV7: minor tweaks to inter-stage calling and payload handling.Ronald G. Minnich
2013-02-19exynos5250: add uartmem_getbaseaddr() in uart driverDavid Hendricks
2013-02-19armv7/snow: add CPU and RAM resources via allocatorDavid Hendricks
2013-02-16exynos5250: clean out some stale IRAM-related config variablesDavid Hendricks
2013-02-16armv7/exynos5250: fix usage of _stack and _estackDavid Hendricks
2013-02-15ARMv7: Drop u-boot type remainsStefan Reinauer
2013-02-15Exynos5250: Drop unused file ehci-s5p.hStefan Reinauer
2013-02-15Exynos: Drop dead code in cpu.hStefan Reinauer
2013-02-15ARMv7: straighten out reset codeStefan Reinauer
2013-02-15Exynos5: Drop S5P directory and merge filesStefan Reinauer
2013-02-15Exynos: Drop unused include filesStefan Reinauer
2013-02-14Exynos: Drop duplicate copy of watchdog.hStefan Reinauer
2013-02-14ARMv7: Drop SKIP_LOWLEVEL_INITStefan Reinauer
2013-02-14Exynos5250: Drop SHA implementationStefan Reinauer
2013-02-13armv7/exynos: remove some stale files leftover from initial importDavid Hendricks
2013-02-11armv7/exynos5250/snow: deprecate CONFIG_{RAMBASE,RAMTOP}David Hendricks
2013-02-10armv7/snow: Remove unused modules in bootblock and romstage.Hung-Te Lin
2013-02-10exynos/snow: move SPI GPIO setup to mainboard bootblock codeDavid Hendricks
2013-02-10exynos/snow: set SPI clock rate in romstage mainDavid Hendricks
2013-02-10armv7/exynos5250: place .id between .start and bootblock mainDavid Hendricks
2013-02-09armv7/exynos: make BL1_SIZE_KB consistent with numbers used...David Hendricks
2013-02-09armv7/snow: add BL1_SIZE_KB and get rid of magic constantsDavid Hendricks
2013-02-08armv7: Use same console initialization procedure for all ARM stagesHung-Te Lin
2013-02-08console: Always allow setting "EARLY_CONSOLE" configuration.Hung-Te Lin
2013-02-08exynos/snow: Configure UART peripheral during console initialization.Hung-Te Lin
2013-02-08console: Revise serial console configuration names.Hung-Te Lin
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-07 22:04:06 +0000