summaryrefslogtreecommitdiff
path: root/src/cpu
AgeCommit message (Collapse)Author
2012-11-12Initialize the VMX MSRMarc Jones
The VMX MSR may come up with random values and needs to be initialized to zero. This was done incorrectly in finalize_smm. It must be done on a per core basis in the general CPU init. This touches all Sandybridge and Ivybridge configs. Change-Id: I015352d0f8e2ebe55ac0a5e9c5bbff83bd2ff86b Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1794 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12Revert "Remove code that enables/disables VMX in coreboot on chromebooks."Marc Jones
The MSR for VMX can start with a random value and needs to be cleared by coreboot. I am reverting this change, as it handles almost everything and doing a follow-on change to fix the improper clearing of the MSR. Change-Id: Ibad7a27b03f199241c52c1ebdd2b6d4e81a18a4e Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/1793 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-12sandybridge: Correct reporting of cores and threadsStefan Reinauer
The reporting of cores and threads in the system was a bit ambiguous. This patch makes it clearer. Change-Id: Ia05838a53f696fbaf78a1762fc6f4bf348d4ff0e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1786 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-07Leave power control registers unlockedSameer Nanda
To allow easy experimentation with thermals, leave power control registers unlocked. Change-Id: Ia53065f3f220c2faed58e7d53e60c3f169ae58ec Signed-off-by: Sameer Nanda <snanda@chromium.org> Reviewed-on: http://review.coreboot.org/1688 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-06cpu/intel/model_1067x: Add proper c-state/p-state/thermal supportNico Huber
Change-Id: I853454e8f5617fb7af5dddd7288bdeeacc7b1b8e Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06intel/socket_BGA956: enable speedstep, CAR, MMX, SSEPatrick Georgi
All of these capabilities exist on all CPUs supported on this socket. Change-Id: I54f34e48e34bb6ab5b9954ab7ece8c2c3a1a8e67 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1664 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-05Overhaul speedstep codeNico Huber
This adds proper support for turbo and super-low-frequency modes. Calculation of the p-states has been rewritten and moved into an extra file speedstep.c so it can be used for non-acpi stuff like EMTTM table generation. It has been tested with a Core2Duo T9400 (Penryn) and a Core Duo T2300 (Yonah) processor. Change-Id: I5f7104fc921ba67d85794254f11d486b6688ecec Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1658 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-05Fix some indentation flaws and break very long linesNico Huber
Change-Id: I3efef6bc8f519382ffdd92eb10b4bcd1a4361ba9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1657 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-02AMD agesa: add enable cache at the end of disable_cache_as_ramSiyuan Wang
add this code according to src/include/cpu/x86/cache.h ,line 92, functin enable_cache() Change-Id: Ida96a98397eeed98dd61ca979e8c5a33bf00f9e5 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1662 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-02Correct FSB reading in speedstep ACPINico Huber
We parsed the MSR the wrong way, and didn't support some valid values. Change-Id: Ia42e3de05dd76b6830aaa310ec82031d36def3a0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1656 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-01Merge cpu/intel/acpi.h into cpu/intel/speedstep.hNico Huber
We had only some MSR definitions in there, which are used in speedstep related code. I think speedstep.h is the better and less confusing place for these. Change-Id: I1eddea72c1e2d3b2f651468b08b3c6f88b713149 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1655 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-10-30Add support for socket LGA775Stefan Tauner
Change-Id: Ia7ef3a4cbc3638a9c9a48b297e392e4e655b6e6b Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/1581 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-10-07Fix typo in mPGA603 socketKyösti Mälkki
Change-Id: I7a49d5fc13fb605a47c3c1662758ebd5935e7780 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1564 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2012-10-07Remove chip.h files without config structureKyösti Mälkki
Also deletes files not included in build: src/southbridge/amd/cimx/sb700/chip_name.c src/southbridge/amd/cimx/sb800/chip_name.c src/southbridge/amd/cimx/sb900/chip_name.c Change-Id: I2068e3859157b758ccea0ca91fa47d09a8639361 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1473 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-19C32 legacy code: change CONFIG_CPU_AMD_SOCKET_C32 to ↵Siyuan Wang
CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA Currently the C32 has some legacy boards which use the old C32 code. We need to seperate them. CONFIG_CPU_AMD_SOCKET_C32 was used in legacy code before. But it is not a good idea, so we change the code as follows: So we use CONFIG_CPU_AMD_SOCKET_C32 to identify mainboard which uses agesa code, and use CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA to identify mainboard which uses legacy code. Change-Id: If6114bf8912e78b7732f25a1adfb2e4d8eb10ee4 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/1497 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-09-05VIA Nano: Add support for VIA Nano CPUsAlexandru Gagniuc
Add code to do the following for the VIA Nano CPUs - Update microcode - Set maximum frequency - Initialize power states - Set up cache Attempting to change the voltage or frequency of the CPU without applying the microcode update will hang the CPU, so we only do transitions if we can verify the microcode has been updated. The microcode is updated directly from CBFS. No microcode is included in ramstage. The microcode is not included in this commit. To get the microcode, run bios_extract on the manufacturer supplied BIOS, and look for the file marked "P6 Microcode". Include this file in CBFS. You can have the build system include this file automatically by selecting Expert Mode, then look under 'Chipset' -> 'Include CPU microcode in CBFS' -> Include external microcode file (check) 'Path and filename of CPU microcode' should contain the location of the microcode file previously extracted. Change-Id: I586aaca5715e047b42ef901d66772ace0e6b655e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/1257 Tested-by: build bot (Jenkins)
2012-09-05buildsystem: Make CPU microcode updating more configurableAlexandru Gagniuc
This patch aims to improve the microcode in CBFS handling that was brought by the last patches from Stefan and the Chromium team. Choices in Kconfig - 1) Generate microcode from tree (default) - 2) Include external microcode file - 3) Do not put microcode in CBFS The idea is to give the user full control over including non-free blobs in the final ROM image. MICROCODE_INCLUDE_PATH Kconfig variable is eliminated. Microcode is handled by a special class, cpu_microcode, as such: cpu_microcode-y += microcode_file.c MICROCODE_IN_CBFS should, in the future, be eliminated. Right now it is needed by intel microcode updating. Once all intel cpus are converted to cbfs updating, this variable can go away. These files are then compiled and assembled into a binary CBFS file. The advantage of doing it this way versus the current method is that 1) The rule is CPU-agnostic 2) Gives user more control over if and how to include microcode blobs 3) The rules for building the microcode binary are kept in src/cpu/Makefile.inc, and thus would not clobber the other makefiles, which are already overloaded and very difficult to navigate. Change-Id: I38d0c9851691aa112e93031860e94895857ebb76 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/1245 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-08-27Intel model_106cx: change CAR to HT-capableKyösti Mälkki
There are hyper-threading Atom CPUs, those would not enable L2 cache with model_6ex CAR code. Switch to code that can handle different number of threads and cores. Change-Id: I57328c231f8998f45f7b0d26c63b24585f8476dd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1384 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: James Laird <jhl@mafipulation.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-22Auto-declare chip_operationsKyösti Mälkki
The name is derived directly from the device path. Change-Id: If2053d14f0e38a5ee0159b47a66d45ff3dff649a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1471 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-09Replicate TOP_MEM and TOP_MEM2 from BSP to AP CPUKyösti Mälkki
The search loop for UMA resource was only used to check for the highest RAM address below 4GB. The cached values from BSP CPU can now be used for the replication. Change-Id: I5244ffa6f8a93f5ff5aaf8a71bd006b0f9cd518a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1388 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-09AMD northbridge: copy TOP_MEM and TOP_MEM2 for distributionKyösti Mälkki
Take a copy of BSP CPU's TOP_MEM and TOP_MEM2 MSRs to be distributed to AP CPUs and factor out the debugging info from setup_uma_memory(). Change-Id: I1acb4eaa3fe118aee223df1ebff997289f5d3a56 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1387 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-09Synchronize rdtsc instructionsStefan Reinauer
The CPU can arbitrarily reorder calls to rdtsc, significantly reducing the precision of timing using the CPUs time stamp counter. Unfortunately the method of synchronizing rdtsc is different on AMD and Intel CPUs. There is a generic method, using the cpuid instruction, but that uses up a lot of registers, and is very slow. Hence, use the correct lfence/mfence instructions (for CPUs that we know support it) Change-Id: I17ecb48d283f38f23148c13159aceda704c64ea5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1422 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-08-07Move cpus_ready_for_init() to AMD K8Kyösti Mälkki
The function is a noop for all but amd/serengeti_cheetah. Change-Id: I09e2e710aa964c2f31e35fcea4f14856cc1e1dca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1184 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-05AMD S3: Remove the hardcoded volatile positionzbao
Change-Id: I4bcf3f3435f0ba487955d14ed1b010fd94b9f625 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/1408 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-08-04Make the device tree available in the rom stageStefan Reinauer
We thought about two ways to do this change. The way we decided to try was to 1. drop all ops from devices in romstage 2. constify all devices in romstage (make them read-only) so we can compile static.c into romstage 3. the device tree "devices" can be used to read configuration from the device tree (and nothing else, really) 4. the device tree devices are accessed through struct device * in romstage only. device_t stays the typedef to int in romstage 5. Use the same static.c file in ramstage and romstage We declare structs as follows: ROMSTAGE_CONST struct bus dev_root_links[]; ROMSTAGE_CONST is const in romstage and empty in ramstage; This forces all of the device tree into the text area. So a struct looks like this: static ROMSTAGE_CONST struct device _dev21 = { #ifndef __PRE_RAM__ .ops = 0, #endif .bus = &_dev7_links[0], .path = {.type=DEVICE_PATH_PCI,{.pci={ .devfn = PCI_DEVFN(0x1c,3)}}}, .enabled = 0, .on_mainboard = 1, .subsystem_vendor = 0x1ae0, .subsystem_device = 0xc000, .link_list = NULL, .sibling = &_dev22, #ifndef __PRE_RAM__ .chip_ops = &southbridge_intel_bd82x6x_ops, #endif .chip_info = &southbridge_intel_bd82x6x_info_10, .next=&_dev22 }; Change-Id: I722454d8d3c40baf7df989f5a6891f6ba7db5727 Signed-off-by: Ronald G. Minnich <rminnich@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1398 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-03Intel CPUs: Fix counting of CPU coresKyösti Mälkki
Detection for a hyper-threading CPU was not compatible with multicore CPUs. When using CPUID eax==4, also need to set ecx=0. CAR init tested on real hardware with hyper-threading model_f25 and under qemu 0.15.1 with multicore CPU. Change-Id: I28ac8790f94652e4ba8ff88fe7812c812f967608 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1172 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-08-01Intel Sandybridge: add reserved memory as resourcesKyösti Mälkki
Reserved memory resources will get removed from memory table at the end of write_coreboot_table(), Change-Id: I02711b4be4f25054bd3361295d8d4dc996b2eb3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1372 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-31Revert "Use broadcast SIPI to startup siblings"Sven Schnelle
This reverts commit 042c1461fb777e583e5de48edf9326e47ee5595f. It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I7dd1cba5a4c1e4b0af366b20e8263b1f6f4b9714 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1381 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26CPU: Add option to set TCC activation offsetDuncan Laurie
The default TCC activation offset is 0, which means TCC activation starts at Tj_max. For devices with limited cooling ability it may be desired to lower TCC activation. This adds an option that can be declared in the devicetree to set the TCC activation to a non-zero value. Enable tcc_offset=15 in devicetree.cb and build/boot the BIOS and check that the value is set in the MSR: > and $(shr $(rdmsr 0 0x1a2) 24) 0xf 0xf Change-Id: I88f6857b40fd354f70fa9d5d9c1d8ceaea6dfcd1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1343 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26ACPI: Add a method to notify OS to re-read _PPCDuncan Laurie
Split this behavior out from PNOT() so the OS can update _PPC limit without re-reading C-state tables. Change-Id: I81b9111a4866f6b9916f74ac57a3caefaa77c565 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1342 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26ACPI: Add function to write _PPC using NVSDuncan Laurie
The existing NVS variable for PPCM will be used to select a dynamic max P-state. By itself this does not change existing behavior because the NVS PPCM variable is initialized to zero. PPCM can be tested by building and booting a modified BIOS that sets gnvs->ppcm to a value greater than 1 and checking from the OS that the P-state is limited to that value. Change-Id: Ia7b3bbc6b84c1aa42349bb236abee5cc92486561 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1341 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26USBDEBUG: buffer up to 8 bytesSven Schnelle
EHCI debug allows to send message with 8 bytes length, but we're only sending one byte in each transaction. Buffer up to 8 bytes to speed up debug output. Change-Id: I9dbb406833c4966c3afbd610e1b13a8fa3d62f39 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1357 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2012-07-26Drop CONFIG_CPU_MODEL_NAME and fix CPU name displayed in logsStefan Reinauer
On SandyBridge systems configured to work with Panther Point the CPU would wrongly be described as IvyBridge. Fix this issue and drop an unneeded Kconfig variable at the same time. Change-Id: I501a4fa00613e589cd315cfee61b2f9561dfcb4d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1335 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-26Enable Microcode in CBFS for all SandyBridge/IvyBridge systemsStefan Reinauer
Change-Id: Idee4facc18e0be60906d2a2f0e99bd39de8d7247 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1332 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25SMM: Fix state table for Intel Core2 CPUsStefan Reinauer
When fixing the SMM state table for SandyBridge/IvyBridge CPUs the wrong table was used for older 64bit capable CPUs. Change-Id: Ia7dff21aa3f0e5aa61575634fc839777de6bef10 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1353 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-25Fix comment to reference IvyBridge, tooStefan Reinauer
On both SandyBridge and IvyBridge BCLK is fixed at 100MHz. Have the comment reflect that. Change-Id: Ia81c3501dc3e68cf3143c3bc864dfbf88901f9f9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1336 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25Include SandyBridge Microcode when IvyBridge is enabledStefan Reinauer
.. in case the system has pluggable CPUs or might come in different SKUs. Change-Id: I7a7cd95b4de5dd78370355f448688e8d000434c1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1333 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25Fix date output in Microcode updateStefan Reinauer
Date and time are mixed up: microcode: updated to revision 0x12 date=2012-12-04 should be microcode: updated to revision 0x12 date=2012-04-12 Change-Id: I85f9100f31d88bb831bef07131f361c92c7ef34e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1334 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-07-25Fix LAPIC timer on Ivy Bridge systemsStefan Reinauer
The LAPIC timer is running at BCLK (100MHz) on Sandy Bridge and Ivy Bridge systems. However, the current timer code assumed that the clock would run at 200MHz instead. This made all delays twice as long as needed. Change-Id: I41b1186daee11cfd9a25b3a9d5ebdeeb271293c7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1330 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24CPU: Set flex ratio to nominal TDP ratio in bootblockDuncan Laurie
CPUs with configurable TDP will run the TSC at the max non-turbo ratio for the maximum TDP value, which can cause issues if another TDP is desired. To deal with this we set the flex ratio to the nominal TDP ratio early in the boot and then configure the Soft Reset Data registers so the PCH can tell the CPU what frequency to run at after a reset. This is done very early in the bootblock because it is necessary to reset the system after setting a flex ratio. The end result is that the TSC will now increment at the max non-turbo frequency for the nominal TDP. On some system with 1.8GHz CPU ensure that the kernel detects the CPU speed as ~1800mhz rather than ~2300mhz: > dmesg | grep "MHz processor" [ 0.004000] Detected 1795.801 MHz processor. Change-Id: I8436dced9199003b6423186a2b041e3f7b84ab8c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/1329 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24SMM: Fix state save map for sandybridge and TSEGDuncan Laurie
There are enough differences that it is worth defining the proper map for the sandybridge/ivybridge CPUs. The state save map was not being addressed properly for TSEG and needs to use the right offset instead of pointing in ASEG. To do this properly add a required southbridge export to return the TSEG base and use that where appropriate. Change-Id: Idad153ed6c07d2633cb3d53eddd433a3df490834 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1309 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24SMM: Add heap region and move C handler higher in regionDuncan Laurie
In order to support SPI and ELOG drivers the SMM region needs to be able to be larger than the previous allocation below 0x7400. Now that we have support for 4M TSEG we do not need to live in this region. This change adds a 16KB heap region abofe the save state area at TSEG+64KB and moves the C handler above this. The heap region is then available for malloc and the C handler can grow to support flash and event log features. While updating the memory map comment in assembly stub I also added a pause instruction to the cpu spin lock as this was added to the C code in latest upstream rebase. Dump sympbols from smm.elf binary to see the new regions: 00010000 B _heap 00014000 B _eheap 00014000 T _smm_c_handler_start 0001b240 T _smm_c_handler_end Change-Id: I45f0ab4df1fdef3b626f877094a58587476ac634 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1308 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24CPU: Update ivybridge PP1 current limit valueDuncan Laurie
The BWG says ivybridge current limit for PP1 is 50A. Verify the PP1 current limit value on link device: > echo $(( ( $(rdmsr 0 0x602) & 0x1fff ) >> 3 )) 50 Change-Id: I946269d21ef605f2525fe03993f569d69128294b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1305 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24CPU: Add basic support for Nominal Configurable TDPDuncan Laurie
Ivybridge B0+ CPUs are capable of supporting multiple TDP levels. This complicates the default case because now the registers that were reporting max non-turbo ratio are reporting that value for the highest possible TDP level. For now this change just forces everything to use the Nominal TDP values instead of the higher (or lower) levels. - When building P-state tables, determine the P[1] (max non turbo) ratio based on the Nominal ratio if available. - Set the turbo activation ratio to the Nominal max ratio. - Mirror the power level settings in new MCHBAR register after they are written, which happens after BIOS_RESET_CPL is set. - Set the current ratio to Nominal ratio at boot. 1) Verify that P-state table is generated properly with P[0]=1801MHz (ratio 0x1C) and P[1]=1800MHz (ratio 0x12) PSS: 1801MHz power 17000 control 0x1c00 status 0x1c00 PSS: 1800MHz power 17000 control 0x1200 status 0x1200 2) Verify power limits in MCHBAR match PKG_POWER_LIMIT: > rdmsr 0 0x610 0x800080aa00dc8088 > mmio_read32 0xfed159a4 0x000080aa > mmio_read32 0xfed159a0 0x00dc8088 3) Verify turbo activation ratio is set to nominal ratio: > rdmsr 0 0x64c 0x0000000000000012 4) Check that proper ratio was set at boot on one core only: > grep 'frequency set to' /sys/firmware/log model_x06ax: frequency set to 1800 model_x06ax: frequency set to 1800 model_x06ax: frequency set to 1800 model_x06ax: frequency set to 1800 Change-Id: I592e60a7740f31b140986a8269dca91b4adbb270 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1304 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Rename cache_lbmem() to cache_ramstage()Stefan Reinauer
... and don't require it to specify a cache type. This function is only used on romcc boards, and should go away (because all boards should be switched to CAR) Change-Id: Ic32ca3be1afffc773c72c140e88b338d48a0c8ca Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1288 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Config changes to support microcode in CBFSVadim Bendebury
Nothing is yet enabled, this is just a config skeleton change. The MICROCODE_INCLUDE_PATH definition is going to be used by the Makefile building the microcode blob for CBFS inclusion. Change-Id: I7868db3cfd4b181500e361706e5f4dc08ca1c87d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1292 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Add microcode blob processingVadim Bendebury
When microcode storage in CBFS is enabled, the make system is supposed to generate the microcode blob and place it into the generated ROM image as a CBFS component. The microcode source representation does not change: it is still an array of 32 bit constants. This new addition compiles the array into a separate object file and then strips all sections but data. The raw data section is then included into CBFS as a file named 'microcode_blob.bin' of type 0x53, which is assigned to microcode storage. Change-Id: I84ae040be52f520b106e3471c7e391e64d7847d9 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1295 Tested-by: build bot (Jenkins)
2012-07-24Add code to read Intel microcode from CBFSVadim Bendebury
When CONFIG_MICROCODE_IN_CBFS is enabled, find the microcode blob in CBFS and pass it to intel_update_microcode() instead of using the compiled in array. CBFS accesses in pre-RAM and 'normal' environments are provided through different API. Change-Id: I35c1480edf87e550a7b88c4aadf079cf3ff86b5d Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/1296 Tested-by: build bot (Jenkins)
2012-07-24Make MAX_PHYSICAL_CPUS invisible on non-AMD boardsStefan Reinauer
It's only used on AMD based boards. Hence drop it, so we don't accidently start using it by mistake instead of MAX_CPUS Change-Id: Id8f522f24283129874d56e70bd00df92abe9c3cf Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1325 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 00:37:14 +0000