coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2013-07-10	i2c: Change the type of the data parameter to uint8_t.	Gabe Black
2013-07-10	armv7/exynos5420: Remove the extra reopen when reading SPI.	Hung-Te Lin
2013-07-10	armv7/exynos5420: Apply new implementation for SPI transmission.	Hung-Te Lin
2013-07-10	armv7/exynos5420: Add output ability and half-duplex mode in SPI driver.	Hung-Te Lin
2013-07-10	armv7/exynos5420: Revise SPI open/close/reset procedure.	Hung-Te Lin
2013-07-10	armv7/exynos5420: Provide configuration for SPI0~SPI2.	Hung-Te Lin
2013-07-10	armv7/exynos5420: Change SPI module to standard <spi-generic> interface.	Hung-Te Lin
2013-07-10	armv7/exynos5420: Clean up unused header and constants in spi.c	Hung-Te Lin
2013-07-10	armv7/exynos5420: Revise SPI device list in cpu.h	Hung-Te Lin
2013-07-10	arm/exynos: Correct SPI session commands.	Hung-Te Lin
2013-07-10	AMD: Kconfig cleanup	Kyösti Mälkki
2013-07-10	exynos5420: i2c: Fix error handling.	Gabe Black
2013-07-10	exynos5420: Clock the mmc blocks off of the mpll.	Gabe Black
2013-07-10	exynos5420: use speed parameter in i2c_init() for HSI2C	David Hendricks
2013-07-10	exynos5420: Change some clock settings.	Gabe Black
2013-07-10	exynos5420: Fix the way the rate of the input clock for i2c buses is found.	Gabe Black
2013-07-10	snow: Add flush to UART driver.	Hung-Te Lin
2013-07-10	Exynos5420: Initialize USB PHY	Stefan Reinauer
2013-07-10	Exynos5250: Initialize USB PHY	Stefan Reinauer
2013-07-10	Exynos: Only compile UART in if serial console is selected	Stefan Reinauer
2013-07-10	Exynos5420: add code to make sure resume will work on DRAM.	Ronald G. Minnich
2013-07-10	Simplify early / bootblock console code	Stefan Reinauer
2013-07-10	exynos5420: Switch to fixed size types in dmc.h.	Gabe Black
2013-07-10	exynos5420: Revamp the high speed I2C driver.	Gabe Black
2013-07-10	Samsung CPUs: Unify Kconfig	Stefan Reinauer
2013-07-10	exynos5420: update I2C code, add HSI2C/USI support	David Hendricks
2013-07-10	ARM: when setting a GPIO to put, set the value, then the direction	Ronald G. Minnich
2013-07-10	exynox5420: Remove the 5250 clock registers and fix the SPI frequency.	Gabe Black
2013-07-10	PIT: memory setup	Ronald G. Minnich
2013-07-10	exynos5420: add I2C8-10 to clock_get_periph_rate()	David Hendricks
2013-07-10	exynos5420: Implement support for the pinmux as functions.	Gabe Black
2013-07-10	exynos5250: De-switch-ify the pinmux configuration code.	Gabe Black
2013-07-10	ARM: Separate the early console (romstage) from the bootblock console.	Gabe Black
2013-07-10	exynos5420: Clear the framebuffer before making it uncacheable	Stefan Reinauer
2013-07-10	exynos5420: Don't disable and re-enable the MMU when uncaching the framebuffer	Stefan Reinauer
2013-07-10	exynos5420: Simplify the graphics code by eliminating the unused color map	Stefan Reinauer
2013-07-10	exynos5420: Fix some problems with the clock management code.	Gabe Black
2013-07-10	armv7: Reserve space BL1 and checksum header by specifying bootblock offset.	Hung-Te Lin
2013-07-10	cpu: Add CPU microcode file to cbfs with 16-byte alignment	Aaron Durbin
2013-07-10	ec: Add romstage function for checking and rebooting EC	Duncan Laurie
2013-07-10	exynos5420: Replace the 5250 clock logic with 5420.	Gabe Black
2013-07-10	exynos5420: Make the ps_hold_setup function public.	Gabe Black
2013-07-10	Exynos5420: Clean up console code	Stefan Reinauer
2013-07-10	exynos5250: Clear the framebuffer before making it uncacheable.	Gabe Black
2013-07-10	exynos5250: Don't disable and re-enable the MMU when uncaching the framebuffer.	Gabe Black
2013-07-10	exynos5250: Simplify the graphics code by eliminating the unused color map.	Gabe Black
2013-07-10	exynos5250: When enabling the I2S pins, turn off pull ups/downs.	Gabe Black
2013-07-10	exynos5420: Replace the 5250 GPIO code with code that should work on 5420.	Gabe Black
2013-07-10	ARMv7: Clean up console code	Stefan Reinauer
2013-07-10	pit: Fix some settings for the exynos5420 CPU.	Gabe Black