summaryrefslogtreecommitdiff
path: root/src/device/pciexp_device.c
AgeCommit message (Collapse)Author
2020-10-21device: Allow virtual/generic devices under PCI in devicetreeDuncan Laurie
This change allows a generic device to be described in the devicetree under a PCI device, such as a root port. Previously any device under a PCI device was expected to also be a PCI device and that does not allow for a virtual/generic device to be present, for example to provide ACPI properties for a root port. The changes are: - Ignore non-PCI devices found under a PCI device when scanning and do not print an error for each devfn scanned. - Don't treat non-PCI devices as leftover and remove them, instead enable them as a static device. - Don't attempt to configure a static device in the tree that is not a PCIe device type. With these changes it is now possible to have a generic device under a PCI device, for example in a USB4/TBT root port (PCIe hotplug device) this generic device will add ACPI properties for the PCIe tunnel routed to the external port: device pci 07.0 on chip soc/intel/common/block/pcie device generic 0 on end end end TEST=boot on volteer with the USB4 root port devices in chipset.cb and ensure they are enabled properly and there are no errors printed in the coreboot log, and that the device properties are created in the SSDT. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I56a491808067dc862a7adfd46852f0bd6b41cd95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46542 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-28Revert "Revert "pciexp_device: Add option to allocate prefetch memory above ↵Furquan Shaikh
4G boundary"" This reverts commit e15f352039a371156ceef37f0434003228166e99. Reason for revert: Resource allocator is split into old(v3) and new(v4). So, this change to provide an option to allocate prefetch memory above 4G boundary can be added back. Since the support for allocating above 4G boundary is available only in resource allocator v4, Kconfig option is accordingly updated to add depends on RESOURCE_ALLOCATOR_V4. Change-Id: I94e5866458c79c2719fd780f336fb5da71a7df66 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41467 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-16Revert "pciexp_device: Add option to allocate prefetch memory above 4G boundary"Furquan Shaikh
This reverts commit dcbf6454b6d2d9b3627a14126ef20ed4b9c7d954. Reason for revert: Resource allocator patches need to be reverted until the AMD chipsets can be fixed to handle the resource allocation flow correctly. Change-Id: I58c9fff1a18ea1c9941e29c2c6e60e338c517c30 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-05-12pciexp_device: Add option to allocate prefetch memory above 4G boundaryFurquan Shaikh
This change adds a Kconfig option to request allocation of prefetch memory for hotplug devices above the 4G boundary. In order to select this option by default and still allow users to disable this if required, another option is added to request allocation of prefetch memory below 4G boundary which defaults to n but can be overriden by mainboards. Without this change, if the number of pciexp bridges supporting hot-plug is more than 4 or if the reserved prefetch memory size for hot-plug cases was increased, then the resource allocator would fail to satisfy the resource requirement below 4G boundary. BUG=b:149186922 TEST=Enabled resource allocation above 4G for prefetch memory on volteer and verified that it gets allocated above 4G boundary. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I061d935eef9fcda352230b03b5cf14e467924e50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39489 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-05Drop explicit NULL initializations from `device_operations`Elyes HAOUAS
Unmentioned fields are initialized with 0 (or NULL) implicitly. Beside that, the struct has grown over the years. There are too many optional fields to list them all. Change-Id: Icb9e14c58153d7c14817bcde148e86e977666e4b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40126 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-04src/device: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: Id5fe26564147ec532850430ea55b19ee94d5c5a5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-02-05pciexp: Add support for allocating PCI express hotplug resourcesJeremy Soller
This change adds support for allocating resources for PCI express hotplug bridges when PCIEXP_HOTPLUG is selected. By default, this will add 32 PCI subordinate numbers (buses), 256 MiB of prefetchable memory, 8 MiB of non-prefetchable memory, and 8 KiB of I/O space to any device with the PCI_EXP_SLTCAP_HPC bit set in the PCI_EXP_SLTCAP register, which indicates hot-plugging capability. The resource allocation is configurable, please see the PCIEXP_HOTPLUG_* variables in src/device/Kconfig. In order to support the allocation of hotplugged PCI buses, a new field is added to struct device called hotplug_buses. This is defaulted to zero, but when set, it adds the hotplug_buses value to the subordinate value of the PCI bridge. This allows devices to be plugged in and unplugged after boot. This code was tested on the System76 Darter Pro (darp6). Before this change, there are not enough resources allocated to the Thunderbolt PCI bridge to allow plugging in new devices after boot. This can be worked around in the Linux kernel by passing a boot param such as: pci=assign-busses,hpbussize=32,realloc This change makes it possible to use Thunderbolt hotplugging without kernel parameters, and attempts to match closely what our motherboard manufacturer's firmware does by default. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I500191626584b83e6a8ae38417fd324b5e803afc Reviewed-on: https://review.coreboot.org/c/coreboot/+/35946 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19device/pciexp: Match Max_Payload_Size between ends of a linkKyösti Mälkki
Ends of a PCIe link may advertise different Max_Payload_Size in their PCIe Express Capabilities, Device Capabilities block. For correct operation, both ends of the link need to have their Device Control Max_Payload_Size programmed to match and not exceed the other end's Device Capabilities. Fixes: https://ticket.coreboot.org/issues/218 Change-Id: I8b1de13e9c73abb30e5ccc792918bb4f81e5fe84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-12-09src/device: Fix typoElyes HAOUAS
Change-Id: Ibe99264a82fdea0e185907d2d2d4c57078ef3ae4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-27src/[arch-lib]: change "unsigned" to "unsigned int"Martin Roth
Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ibb7b48a7a144421aff29acbb7ac30968ae5fe5ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/36329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-18src: Remove unused include '<device/pci_ids.h>'Elyes HAOUAS
Change-Id: Ic90dcff9d0b49a75a26556e4a1884a2954ef68f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36063 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-17AUTHORS: Move src/device copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Additional cleanup - Unify "Inc" to "Inc." and "LLC." to "LLC" Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie03a3ce1f6085494bd5f38da76e2467970cf301a Reviewed-on: https://review.coreboot.org/c/coreboot/+/35430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-05-04src/device/pciexp_device.c: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: I82b73e1698d8d44e32ad9f21e575a7fce35baa1c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-26device: Add flag to disable PCIe ASPMNico Huber
For broken devices that spuriously advertise ASPM, make it possible to decide ASPM activation in the device driver. Change-Id: I491aa32a3ec954be87a474478609f0f3971d0fdf Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/25617 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-20pci: Move inline PCI functions to pci_ops.hPatrick Rudolph
Move inline function where they belong to. Fixes compilation on non x86 platforms. Change-Id: Ia05391c43b8d501bd68df5654bcfb587f8786f71 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25720 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-08device/pciexp_device: Set values numerically instead of as bitmaskPatrick Georgi
As noted on linux-pci, we have a weird way to handling "value" and "scale" fields that are supposed to contain numerical values: we encode them as a bitfield. Instead define the two fields (offset and mask) and use numbers. Another issue, not fixed in this CL, is that we write hard-coded values while these fields really need to contain the max() of acceptable delays of the downstream devices. That way the controller can decide whether or not to enter a deeper power management state. It's noted as a TODO. Change-Id: I895b9fe2ee438d3958c2d787e70a84d73eaa49d2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Found-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-on: https://review.coreboot.org/22740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-10-13src/device: Update LTR configuration schemeAamir Bohra
This patch moves out LTR programming under L1 substate to pchexp_tune_device function, as substate programming and LTR programming are independent. LTR programming scheme is updated to scan through entire tree and enable LTR mechanism on pci device if LTR mechanism is supported by device. BRANCH=none BUG=b:66722364 TEST=Verify LTR is configured for end point devices and max snoop latency gets configured. Change-Id: I6be99c3b590c1457adf88bc1b40f128fcade3fbe Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/21868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-15device/pciexp_device.c: Terminate CLK PM message with newlineArthur Heymans
Change-Id: I746e2cc47a83cb04fd404851d3644b8341761022 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20544 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-09pciexp_device: Remove useless write on a read-only registerYouness Alaoui
The Role-Based Error Reporting is not a configurable field, it's a read only field in the Device Capability register. This code was old and comes from commit f6eb88ad but evidently is not useful in any way. The PCIe Specification [1] states that it's read-only and must always be set to 1. I have also done tests on purism/librem13 hardware, trying to change that value, without any success. [1]: PCI Express Base Specification Revision 3.0 Page 612 Change-Id: I729617a5c6f4f52dfc4c422df78379b309066399 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09pciexp_device: Prevent race condition with retrain linkYouness Alaoui
The PCIe specification[1] describes a race condition that can occur when using the Retrain Link bit in the Link Control Register. The race condition is avoided by checking the retrain link bit in the link status register and waiting until it is set to 0, before initiating a new link retraining. [1] PCI Express Base Specification Revision 3.0 Page 633 Change-Id: I9d5840fb9a6e63838b5a4084d3bbe483f1d870ed Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-06PCI ops: Define read-modify-write routines globallyKyösti Mälkki
Change-Id: I7d64f46bb4ec3229879a60159efc8a8408512acd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17690 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01PCIEXP_PLUGIN_SUPPORT: Change dependency on PCI accessKyösti Mälkki
Some PCI-e capability registers are located starting from 0x100, these are not accessible using the conventional PCI IO config operations at 0xcf8/0xcfc, unless PCI_CFG_EXT_IO was selected. Thus any feature that calls pciexp_find_extended_cap() depends on either MMCONF_SUPPORT_DEFAULT or PCI_CFG_EXT_IO being enabled on the platform. In theory there can be system without MMCONF_SUPPORT, but with complete PCI Express configuration space available using PCI_CFG_EXT_IO. Do not use explicit PCI MMCONF operations here, but rely on the default PCI access method to be able to access all of the configuration space. While at it, convert to IS_ENABLED() everywhere in the source and organize Kconfig file better. Change-Id: Ica6e16d2fb2adc532e644c4b2c47806490235715 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17546 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01PCIEXP_ASPM: Unify code with other PCI-e tuningKyösti Mälkki
Error reporting can be enabled together with ASPM, there is no other use for function return value. Change-Id: I58081fac0df5205a5aea65d735d34b375c2af9cd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17654 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30Revert "device/pciexp_device: Tune PCIe bridges before scanning children"Kyösti Mälkki
This reverts commit 785b3eb6e8fcafb38395eec00f4f0fc0e906c7cc. The commit re-tuned the upstream link again, it does not tune secondary side. Change-Id: I9be70e95b06ceff99beba8a7c7eb6402b32fcca1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/12253 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2015-10-25device/pciexp_device: Tune PCIe bridges before scanning childrenTimothy Pearson
Change-Id: Ieccafe8864d622c651e6a524e9898505ded15e54 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12187 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2015-06-17PCIe : Adding some error/not-null condition checkingPratik Prajapati
This patch checks for following conditions (1) while enabling LTR, if PCI_CAP_ID_PCIE is don't found then don't enable LTR. (2) 2.1) set_L1_ss_latency is member if ops_pci, which could be NULL. so confirm ops_pci is not NULL before calling its member function. 2.2) if PCI_CAP_ID_PCIE is not found, then don't try to set latency. BUG=none BRANCH=none TEST=build and boot coreboot with L1 substate enabled on sklrvp3. Change-Id: I31965266f81f2a12ee719f69ed9a20b096c8b315 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3592a7c974186f2f1113cb002db4632c8f1ab181 Original-Change-Id: I95041490f9fafd2d6f57a8279614ccb7994a1447 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/276423 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/10559 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-04devicetree: Change scan_bus() prototype in device opsKyösti Mälkki
The input/output value max is no longer used for tracking the bus enumeration sequence, everything is handled in the context of devicetree bus objects. Change-Id: I545088bd8eaf205b1436d8c52d3bc7faf4cfb0f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04PCI subsystem: Drop parameter max from scan_busKyösti Mälkki
Change-Id: Ib33d3363c8d42fa54ac07c11a7ab2bc7ee4ae8bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8539 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-03-23PCIe: Revise L1 Sub-State supportKenji Chen
BRANCH=None BUG=None TEST=Confirmed build pass only Signed-off-by: Kenji Chen <kenji.chen@intel.com> Change-Id: Ic0e845436614e63ad5ace7fb74400f7ea295571c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d3670b92e40d8757a48add6116a0edcec18074d8 Original-Change-Id: I5e029b0f82a771149d4c6127e30b9062e8eaba89 Original-Reviewed-on: https://chromium-review.googlesource.com/244514 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com> Original-Tested-by: Kenji Chen <kenji.chen@intel.com> Reviewed-on: http://review.coreboot.org/8833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-23PCIe: Add L1 Sub-State support.Kenji Chen
Enable L1 Sub-State when both root port and endpoint support it. [pg: keyed the feature to MMCONF_SUPPORT, otherwise boards without that capability fail to build.] Change-Id: Id11fc7c73eb865411747eef63f5f901e00a17f84 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ac04ad7e2261846e40da297f7fa317ccebda092 Original-BUG=chrome-os-partner:31424 Original-TEST=Build a image and run on Samus proto boards to check if the settings are applied correctly. I just only have proto boards and need someone having EVT boards to confirm the settings. Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com> Original-Change-Id: Id1b5a52ff0b896f4531c4a6e68e70a2cea8c736a Original-Reviewed-on: https://chromium-review.googlesource.com/221436 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/8832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-09device/pciexp: Add support for PCIe CLK power managementKane Chen
Set PCIe "Enable Clock Power Management", if endpoint supports it. BUG=chrome-os-partner:31424 BRANCH=none TEST=build and boot on rambi, check Enable Clock Power Management in link control register is set properly Change-Id: Ie54110d1ef42184cfcf47c9fe4d735960aebe47f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://chromium-review.googlesource.com/220742 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> [Edit commit message.] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8447 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-11-30Rename devices -> deviceStefan Reinauer
to match src/include/device Change-Id: I5d0e5b4361c34881a3b81347aac48738cb5b9af0 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1960 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>