summaryrefslogtreecommitdiff
path: root/src/device
AgeCommit message (Collapse)Author
2015-06-17PCIe : Adding some error/not-null condition checkingPratik Prajapati
This patch checks for following conditions (1) while enabling LTR, if PCI_CAP_ID_PCIE is don't found then don't enable LTR. (2) 2.1) set_L1_ss_latency is member if ops_pci, which could be NULL. so confirm ops_pci is not NULL before calling its member function. 2.2) if PCI_CAP_ID_PCIE is not found, then don't try to set latency. BUG=none BRANCH=none TEST=build and boot coreboot with L1 substate enabled on sklrvp3. Change-Id: I31965266f81f2a12ee719f69ed9a20b096c8b315 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3592a7c974186f2f1113cb002db4632c8f1ab181 Original-Change-Id: I95041490f9fafd2d6f57a8279614ccb7994a1447 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/276423 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/10559 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-13Move remap_bsp_lapic to AMD specific codeStefan Reinauer
It's not used outside of very old AMD CPUs. Change-Id: Ide51ef1a526df50d88bf229432d7d36bc777f9eb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10538 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-10resource: Refactor IORESOURCE flags useKyösti Mälkki
The type of a resource is really an enumeration but our implementation is as a bitmask. Compare all relevant bits and remove the shadowed declarations of IORESOURCE bits. Change-Id: I7f605d72ea702eb4fa6019ca1297f98d240c4f1a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8891 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-10PCI subsystem: Drop PCI_64BIT_PREF_MEM optionKyösti Mälkki
No board in the tree selects this and it looks like the implementation was done at chipset level while it should be part of PCI subsystem. When enabled, at least AMD K8 and f14, f15tn and f16kb fail build test. Feature of placing prefetchable PCI memory above 4GB may not work if there is any 32-bit only prefetchable PCI BARs in the system. Change-Id: I40ded2c7d6d05f461423721aa5d78a78f9f9ce1e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8705 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-09device/device.c: Improve output in `init_dev()`Paul Menzel
Since commit 05294292 (device tree: track init times) there are two lines printed for each init() call of a device, when `HAVE_MONOTONIC_TIMER` is selected. […] CPU_CLUSTER: 0 init 12708 usecs DOMAIN: 0000 init DOMAIN: 0000 init 1 usecs PCI: 00:00.0 init Northbridge init PCI: 00:00.0 init 2 usecs PCI: 00:01.0 init PCI: 00:01.0 init 1 usecs PCI: 00:01.1 init PCI: 00:01.1 init 1 usecs PCI: 00:11.0 init PCI: 00:11.0 init 1 usecs PCI: 00:14.0 init PCI: 00:14.0 init 1 usecs PCI: 00:14.3 init SB800 - Late.c - lpc_init - Start. RTC Init RTC: coreboot checksum invalid SB800 - Late.c - lpc_init - End. […] Improve the output by changing the wording to. %s init ...\n init() %s init finished in %ld usecs\n Note, that `%s init ... done in %ld usecs` is not possible as the function `init()` can also print messages. Change-Id: I7132cd650911dba680f060d6073a5a09c879b24c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10455 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05AMD K8 fam10: Drop extra HT scan_chain() parametersKyösti Mälkki
Change-Id: Ice7cb89c19585cf725b6f73c33443050f8d65418 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8565 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-05AMD K8 fam10: Refactor HT link connection testKyösti Mälkki
Change-Id: I1e935a6b848a59f7f2e58779bceea599032de9e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8562 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-04devicetree: Change scan_bus() prototype in device opsKyösti Mälkki
The input/output value max is no longer used for tracking the bus enumeration sequence, everything is handled in the context of devicetree bus objects. Change-Id: I545088bd8eaf205b1436d8c52d3bc7faf4cfb0f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04devicetree: Single scan_bridges()Kyösti Mälkki
Change-Id: Ifd277992a69a4182e2fac92aaf746abe4fec2a1b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8540 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04PCI subsystem: Drop parameter max from scan_busKyösti Mälkki
Change-Id: Ib33d3363c8d42fa54ac07c11a7ab2bc7ee4ae8bf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8539 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04PCI subsystem: Use subordinate property to track bus enumerationKyösti Mälkki
Parameter max is the cumulative number of PCI buses scanned on the system so far. Use the property subordinate from the parent PCI bridge device to keep track of the first available bus number instead of passing that on the stack. Change-Id: I1a884c98d50fa4f1eb2752e10b778aea8a7b090a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8537 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04PCI subsystem: Refactor PCI bridge register controlKyösti Mälkki
Change-Id: I1766c92abe7a74326c49df74ba38930a502fcb5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8536 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04devicetree: Rename unused parameter max in domain_scan_bus()Kyösti Mälkki
For the PCI root node, input parameter max==0 and output value max is not relevant for operation. Change-Id: I23adab24aa957c4d51d703098a9a40ed660b4e6c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8855 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-04devicetree: Rename unused parameter to passthruKyösti Mälkki
The actual use of the parameter max is to keep track of PCI bus number while recursively scanning PCI bridges or PCI-e rootports. Neither CPU, SMBus, LPC or other static buses are involved in this enumeration, but the way bridge operations were originally designed forced to pass this argument thru unrelated functions. Follow-up removes these once the function prototype gets fixed. Change-Id: Idbc9c515a362c571a1798bb36972058b309c2774 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8535 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-04HyperTransport: Use subordinate property to track chain enumerationKyösti Mälkki
For amdfam10, (ht_c_index > 3) never evaluates true as the code already has a return for this case above. Change-Id: Ie90941671e1b2b4f42e2b1b0641ca59334fcf0f1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8688 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04HyperTransport: Move pci_scan_bus() callKyösti Mälkki
Allows to remove parameter max from the call, it is not involved with the unitid assignment. Change-Id: I087622f4ff69474f0b27cfd8709106ab8ac4ca98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8687 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-02cbfs: new API and better program loadingAaron Durbin
A new CBFS API is introduced to allow making CBFS access easier for providing multiple CBFS sources. That is achieved by decoupling the cbfs source from a CBFS file. A CBFS source is described by a descriptor. It contains the necessary properties for walking a CBFS to locate a file. The CBFS file is then decoupled from the CBFS descriptor in that it's no longer needed to access the contents of the file. All of this is accomplished using the regions infrastructure by repsenting CBFS sources and files as region_devices. Because region_devices can be chained together forming subregions this allows one to decouple a CBFS source from a file. This also allows one to provide CBFS files that came from other sources for payload and/or stage loading. The program loading takes advantage of those very properties by allowing multiple sources for locating a program. Because of this we can reduce the overhead of loading programs because it's all done in the common code paths. Only locating the program is per source. Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9134 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-05resource: Adjust memory resources high earlierKyösti Mälkki
Do this to avoid reporting incorrect resource window in the logs. Change-Id: Icb7978deeb54f0ec6c29473ce9034fe44b6d7602 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8890 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-05resource: Enhance resource reportingKyösti Mälkki
Remove some redundancy in both source code and console output. Change-Id: I32350966de7af30b3ca4ac747fe3bf623ea9484b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8889 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-05resource: Report correct secondary resource windowKyösti Mälkki
Once a bridge window resource is allocated, it becomes the base and limit for any resource on the secondary bus. Upper limit was incorrectly reported in the log while assigning secondary resources. Change-Id: I69f0a02aae6d13f77aaa2dace924b8970b23edad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8888 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-04-22device: Add class and subclass name supportLee Leahy
Add support to display class and subclass names for PCI devices. BRANCH=none BUG=None TEST=Build and run on strago/cyan. Change-Id: I5136fae45b8a1cd02541f233d29a246cdfcd8331 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7c9b0d7201b09a06ea32f0db84187d15f767c80 Original-Change-Id: Ibf2ee89dd84040ca6ab0e52857a69f7ed0c28f37 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/263342 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/9901 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21Unify byte order macros and clrsetbitsJulius Werner
This patch removes quite a bit of code duplication between cpu_to_le32() and clrsetbits_le32() style macros on the different architectures. This also syncs those macros back up to the new write32(a, v) style IO accessor macros that are now used on ARM and ARM64. CQ-DEPEND=CL:254862 BRANCH=none BUG=chromium:444723 TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu, Storm and Urara. Booted on Jerry. Tried to compare binary images... unfortunately something about the new macro notation makes the compiler evaluate it more efficiently (not recalculating the address between the read and the write), so this was of limited value. Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254866 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9838 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17rk3288: Add software I2C supportJulius Werner
This patch adds the necessary platform glue to allow the use of software-driven I2C bit banging on the RK3288. This is just a debugging feature that can be used to reproduce certain I2C failure cases. Also fix Makefile verstage linking for the feature and add some new rk3288 IOMUX macros as needed. BRANCH=None BUG=None TEST=Added "CONFIG_SOFTWARE_I2C=y" to configs/config.veyron_jerry, wrapped Jerry's bootblock and verstage in software_i2c_attach/detach() calls, confirmed that both PMIC and TPM could be driven correctly with software I2C driver. Tried out different combinations of software_i2c_wedge_ack() and software_i2c_wedge_read() on the PMIC and observed transfer results with the hardware controller after reboot... the worst that would happen is that the first register read-modify-write (DCDC_ILMAX) would fail to read, but all later transfers would be fine. Since that register is written twice (due to current BUCK1 ramp implementation) and is not terribily important anyway, I think we don't need to worry about wedging problems. Change-Id: Iba801ee61d30fb1fd3aef8300612c67fa50c441b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 24dfca9bab38a20c40ef0c2dd4c775b8d8f47487 Original-Change-Id: I96777300a57c85471bad20e23a455551e9970222 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/247890 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-01cbfs: correct types used for accessing filesAaron Durbin
In commit 72a8e5e751a7fa97c9d198f68cad49f9d9851669 the Makefile's were updated to use named types for cbfs file addition. However, the call sites were not checked to ensure the types matched. Correct all call sites to use the named types. Change-Id: Ib9fa693ef517e3196a3f04e9c06db52a9116fee7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9195 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-03-23PCIe: Revise L1 Sub-State supportKenji Chen
BRANCH=None BUG=None TEST=Confirmed build pass only Signed-off-by: Kenji Chen <kenji.chen@intel.com> Change-Id: Ic0e845436614e63ad5ace7fb74400f7ea295571c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d3670b92e40d8757a48add6116a0edcec18074d8 Original-Change-Id: I5e029b0f82a771149d4c6127e30b9062e8eaba89 Original-Reviewed-on: https://chromium-review.googlesource.com/244514 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com> Original-Tested-by: Kenji Chen <kenji.chen@intel.com> Reviewed-on: http://review.coreboot.org/8833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-23PCIe: Add L1 Sub-State support.Kenji Chen
Enable L1 Sub-State when both root port and endpoint support it. [pg: keyed the feature to MMCONF_SUPPORT, otherwise boards without that capability fail to build.] Change-Id: Id11fc7c73eb865411747eef63f5f901e00a17f84 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ac04ad7e2261846e40da297f7fa317ccebda092 Original-BUG=chrome-os-partner:31424 Original-TEST=Build a image and run on Samus proto boards to check if the settings are applied correctly. I just only have proto boards and need someone having EVT boards to confirm the settings. Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com> Original-Change-Id: Id1b5a52ff0b896f4531c4a6e68e70a2cea8c736a Original-Reviewed-on: https://chromium-review.googlesource.com/221436 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/8832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-21device: convert to stopwatch APIAaron Durbin
Instead of open coding the monotonic timers use the stopwatch abstraction. BUG=None BRANCH=None TEST=Booted and noted timings work as expected. Built with software_i2c and no compilation failures. Change-Id: Ie5ecdd5bc764c1ab8ba4a923e65a1666aacd22f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c7bffb5aeb41e9b88cd2c99edd6abc38f1dc90af Original-Change-Id: I0170fe4b93d9976957a2dcb00a6ea41ddc0320ce Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/219495 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/8817 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-09AMD fam10: Drop PCI_BUS_SEGN_BITSKyösti Mälkki
All boards in tree use 0. Looks like this is all work that was never completed and tested. We also have static setting sysconf.segbit=0 which would conflict with PCI_BUS_SEGN_BITS>0. Having PCI_BUS_SEGN_BITS>0 would also require PCI MMCONF support to cover over 255 buses. Change-Id: I060efc44d1560541473b01690c2e8192863c1eb5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8554 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-03-09device/pciexp: Add support for PCIe CLK power managementKane Chen
Set PCIe "Enable Clock Power Management", if endpoint supports it. BUG=chrome-os-partner:31424 BRANCH=none TEST=build and boot on rambi, check Enable Clock Power Management in link control register is set properly Change-Id: Ie54110d1ef42184cfcf47c9fe4d735960aebe47f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://chromium-review.googlesource.com/220742 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> [Edit commit message.] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8447 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-03-01devicetree: Drop dummy root_dev opsKyösti Mälkki
This is just dead code. Should we decide that we want some of these calls made, they would be implemented in the mainboard context. Change-Id: I1f097c8da722f3afab9aa1c80b96590c7ca457d5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8532 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-15device/device_util.c: Add space after ellipse for better legibilityPaul Menzel
Currently the coreboot console log contains messages in the following form. Show all devs...Before device enumeration. […] Show all devs...After init. Add a space after the ellipse, so it’s better readable and it does not look like a newline is missing. Show all devs... Before device enumeration. […] Show all devs... After init. Change-Id: Ifa2a37b8d60c433c219df7533a79fced03b6271a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8424 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-15x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointerKevin Paul Herbert
On x86, change the type of the address parameter in read8()/read16/read32()/write8()/write16()/write32() to be a pointer, instead of unsigned long. Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330 Signed-off-by: Kevin Paul Herbert <kph@meraki.net> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/7784 Tested-by: build bot (Jenkins)
2015-02-10PCI subsystem: Remove AGP bridge typeKyösti Mälkki
There is no auto-detection for AGP type and we have no hardware that selects this. Furthermore, we treat AGP bridges just like PCI bridges, there is no optimisation for higher bandwidth. Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8367 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-02-05drivers/xgi/z9s: Port Linux framebuffer initialization to corebootTimothy Pearson
Add native XGI Z9s framebuffer support to coreboot XGI initialization code largely taken from Linux 3.18.5 TEST: Booted KFSN4-DRE with XGI Volari Z9s into SeaBIOS with SeaVGABIOS enabled. Text appeared correctly on screen and interaction with graphical comboot menu was successful. However, Linux cleared the framebuffer on boot, rendering the screen useless until Linux loaded its native xgifb driver. Change-Id: I606a3892849fc578b0c4d74536aec0a0adef3be3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8331 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-02-05AMD HyperTransport: Drop unused link optimisationKyösti Mälkki
Change-Id: Ia4398f6eb013c69838487bdd02d094f97d7224b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8342 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-01-30devicetree: Search PnP device node from the tree by pathKyösti Mälkki
Copied from device_util.c with added ROMSTAGE_CONST. Change-Id: If872631ed96a79b9a0b15e09382d6f81098c8db3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8297 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-24device/hypertransport.c: Fix typo in commentTimothy Pearson
Change-Id: Ib63a8b6e7f4663926104426992f6dea9ee3510b0 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8262 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-01-20device/oprom/realmode/x86: Fix memory corruptionZhuo-Hao Lee
The length of the memcpy is incorrect and this will cause the destination buffer to corrupt the following 2 bytes of data. BUG=none BRANCH=All TEST=build and boot on rambi, system boot up without error Change-Id: I96adf2555b01aa35bb38a2e0f221fc2b2e87a41b Signed-off-by: Zhuo-Hao Lee <zhuo-hao.lee@intel.com> Reviewed-on: https://chromium-review.googlesource.com/237510 Reviewed-by: Ryan Lin <ryan.lin@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> [Remove usage of macro `FIELD_SIZEOF(t, f)`.] Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/8227 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2015-01-12src/device: Doxygen fixesMartin Roth
- Add missing parameters - add missing @param commands Change-Id: I029b5dafde94bd250800b06c0e9bd2118f10ef48 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/8173 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2015-01-06doxygen fixes: fix parameter names to match the functionsMartin Roth
The doxygen parameter names in the comments no longer matched the functions they were attached to. Doxygen complains about extra parameter comments and uncommented parameters in the functions. Change-Id: I21b8a951f8d8d04b07c3779000eeaf1e69fed463 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/8101 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-31Fix Kconfig whitespaceKyösti Mälkki
Change-Id: Iad64d018edda3064a77bfbcd41cfea5275a2e737 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8013 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-30i2c: Add software_i2c driver for I2C debugging and emulationJulius Werner
This patch adds I2C emulation in software through raw toggling of the SDA/SCL lines. Platforms need to provide bindings to toggle their respective I2C busses for this to work (e.g. by pinmuxing them as GPIOs, currently only enabled for Tegra). This is mostly useful as a debugging feature, to drive unusual states on a bus and closely monitor the device output without the need of a bus analyzer. It provides a few functions to "wedge" an I2C bus by aborting a transaction at certain points, which can be used to test if a system can correctly recover from an ill-timed reboot. However, it can also dynamically replace the existing I2C transfer functions and drive some/all I2C transfers on the system, which might be useful if a driver for the actual I2C controller hardware is not (yet) available. Based on original code by Doug Anderson <dianders@chromium.org> and Hung-ying Tyan <tyanh@chromium.org> for the ChromeOS embedded controller project. BRANCH=None BUG=chrome-os-partner:28323 TEST=Spread tegra_software_i2c_init()/tegra_software_i2c_disable() through the code and see that everything still works. Original-Change-Id: I9ee7ccbd1efb38206669a35d0c3318af16f8be63 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198791 Original-Reviewed-by: Doug Anderson <dianders@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8f71503dbbd74c5298e90e2163b67d4efe3e89db) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id6c5f75bb5baaabd62b6b1fc26c2c71d9f1ce682 Reviewed-on: http://review.coreboot.org/7947 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-28RELOCATABLE_RAMSTAGE: Fix weak symbols with option ROMsKyösti Mälkki
After relocation the weak symbol map_oprom_vendev is no longer NULL. Always have empty stub function defined. Change-Id: I5b1bdeb3f37bb04363cf3d9dedaeafc9e193aaae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7956 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-19spd_cache debug: Log invalid CRC checksumTobias Diedrich
"SPD has a invalid or zero-valued CRC" is not a very useful message, so show the actual and expected values. Change-Id: I31a1cdacc82240c699627769d490b94f5d378e86 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/7393 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-07ddr3: Plumber DIMM type to parsed structure.Vladimir Serbinenko
Useful for distinguishing registered modules. Change-Id: Ibf4a0f2cde6d50a1c5c1da0f50e3022a2bc7ccd7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7686 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-08device/dram/ddr3.c: Fix sizeof on array func param overflowEdward O'Callaghan
The sizeof on array function parameter will return size of 'u8 *' instead of 'spd_raw_data' (aka 'u8 [256]' leading to an overflow. Found-by: Clang Change-Id: I78e113a640b2953c853eb43bd6874e4694260b1f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7353 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-11-05pci_ops.{c,h}: Don't hide pointers behind typedefsEdward O'Callaghan
Change-Id: I7cf7c236f94314d7970b19063d73db788c8267e5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7227 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 17:31:10 +0000