summaryrefslogtreecommitdiff
path: root/src/drivers/i2c
AgeCommit message (Collapse)Author
2018-06-24drivers/i2c/sx9310: Check for config not being NULL before using itFurquan Shaikh
This change fixes the issue reported by Coverity CID 1393576 to ensure that config is checked for NULL before it is actually used. Change-Id: I5f0cd2bf2437fc640f4cf8d8203a971daf1f8d17 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22drivers/i2c: Add a driver for Semtech SX9310Enrico Granata
This adds a new driver for the SX9310 proximity detector device. The purpose of this is to enable the device's calibration information to be stored in firmware, and then transferred over to the kernel via ACPI. This device has more than 10 individual configuration parameters, so they would not fit in the generic driver's properties table. Change-Id: Id8c434eec9fe2da731e142442503a12e88db2236 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27173 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-12drivers/i2c/generic: Ensure config is not NULL before accessing itFurquan Shaikh
This change checks to ensure that config is not NULL before it is accessed for the first time. Reported by: Coverity CID #1393312 Change-Id: Ic248c79783da9c2bfdf3b7f737e5963feff7558c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-06src/driver/i2c/{generic,hid,tpm,max}: Update device name based on devicetree.cbNaresh G Solanki
Name i2c device structure based on that in devicetree.cb Now log looks like: I2C: 01:0a (WCOM Touchscreen) I2C: 03:13 (Realtek RT5663) I2C: 03:39 (SSM4567 Right Speaker Amp) I2C: 03:3a (SSM4567 Left Speaker Amp) BUG=None BRANCH=None TEST=Build & boot Soraka Change-Id: I5dbb66ab705cd8601b8b1dc94bc6ee9f181b7be2 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/26830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-28drivers/i2c/max98373: update DT property namesSathyanarayana Nujella
Upstream Kernel side codec driver expect DT properties to have 'maxim' prefix. Update accordingly while filling SSDT entries. BUG=b:79362472 TEST=dump DT properties in kerenl side and cross checked TEST=Audio playback works with this change Change-Id: Iaa4b14492dbb5a0087242f1485493f3192336f60 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-22src: Remove non-ascii charactersMartin Roth
Change-Id: Iedb78e24a286a51830c85724af0179995ed553be Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-04drivers/i2c/da7219: Add mclk-name propertyAkshu Agrawal
Non-dts based systems can pass mclk to da7219 driver by this property. BUG=b:74570989 TEST=Enabled clock in kernel driver using the property Change-Id: I2e10769e5b3c6b3aa30f340fe0e88c29b87430cb Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/25919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-02src/drivers: Add reset/enable/stop_off_ms variables to ACPI devicesShelley Chen
Some touchscreens need to adhere to certain timings during the power off sequence as well as during the power on sequence. Adding reset_off_delay_ms, enable_off_delay_ms, and stop_off_delay_ms to accommodate these devices. BUG=b:78311818 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: Idb4a5dbe56eee4749d2f2b514e92c28fb2c6078f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/25882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-27drivers/i2c/lm63: Remove unneeded headersElyes HAOUAS
Change-Id: Id13eef7f0fca0b929372490859aa4734ea7a9f23 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-27drivers/i2c/adm1026: Remove unneeded headersElyes HAOUAS
Change-Id: Iaed9c0882847511642d8eaab25e10d1ecf24bf90 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-27drivers/i2c/adm1027: Remove unneeded headersElyes HAOUAS
Change-Id: I147b3a2c79cd5e6b0e5fa3d23221a6afda8ba8f7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-26drivers/i2c/ck505: Remove unneeded headersElyes HAOUAS
Change-Id: Ic525c92e73097752a7c690186dc2034785cac678 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25821 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-03-21drivers/i2c/designware: Fix indentationMaulik V Vaghela
Remove extra tab before printk statement. Change-Id: Id82239f74ac030f25000a08764637f6d1b52b87b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/25295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-15drivers/i2c: Add chip driver for I/O expander PCA9538Werner Zeh
The chip PCA9538 is a 8 bit I/O expander connected to the systems I2C bus. Add a chip driver to support this chip. Beside the pure chip driver two interface functions are provided to read the state of the pins and write output values to the pins. As the slave address of this chip is hardware configurable the function pca9538_get_dev() is used to get the right slave address. This function needs to be implemented in mainboard code if one needs to use the interface functions to read and write I/O state. Change-Id: Ic856123b4f4c8b721928ee3a2a4bb37833ea4b20 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/23748 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-14drivers/i2c/designware: Remove spurious word ("familuar")Jonathan Neuschäfer
Fixes: b8dc63bdfe ("ic2/designware: Move Intel i2c logic to shared driver") Change-Id: Ic521a2d60b403b322ae583bb2c26da6019bf0ab0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23714 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-10drivers/i2c/da7219: Allow GPIO based interruptDaniel Kurtz
Allow specifying the DA7219 interrupt pin as either an Interrupt or GpioInt. BUG=b:72121803 TEST=(with whole patch series) Grunt Kernel discovers DA7219 on i2c0 Change-Id: I2d26731bf4c0ad590dad2c5d26c252371f415f9a Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-02-02drivers/i2c/designware: conform to controller restrictionsAaron Durbin
The designware i2c controller indicates that the slave address shouldn't be programmed while the controller is enabled. Therefore, switch the ordering of the slave target address and the enable. Additionally, ensure the controller is disabled prior to the start of the slave programming sequence. Lastly, chunk up the i2c_msg segments at differing slave address boundaries. That allows for simpler programming for the controller by only doing one slave address transaction chunk at a time. BUG=b:70232394,b:69250772 Change-Id: Iebc08e2db847cb182fad98e0ff3d799b9a64aca7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-01drivers/i2c/designware: Unset IC_ENABLE when setting target addressChris Ching
To set address on AMD, IC_ENABLE == 0. BUG=b:69416132 BRANCH=none TEST=Test communication with i2c TPM on grunt and coral Change-Id: I7faee8e11439deceab946cc82d30d274b529b90d Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/23293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-01-30drivers/i2c/tpm: Add irq_gpio support to tpm.Justin TerAvest
Grunt (a amd-stoneyridge based platform) uses a GPIO to interface with the tpm. This change allows devicetree entries to use a irq_gpio entry to describe the interface with the TPM. BUG=b:72655090 Change-Id: I08289891408d7176f68eb9c67f7a417a2448c2de Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-25drivers/i2c/designware: reduce API complication for bus configAaron Durbin
Right now dw_i2c_get_soc_cfg() is expecting the SoC to implement that callback for obtaining the bus config. However, we're currently forcing another parameter of struct device so one can do the lookup. This works for Intel-based systems since the struct device was needed to program the BAR, etc. However, from an API standpoint, it just complicates matters by needing to obtain the struct device. The SoC already has knowlege of its own devices so it can get the config itself by bus number. Therefore, remove that contraint from the API. BUG=b:70232394 Change-Id: Id8558f5deedda0963a46a532a7bf984e168fb270 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23420 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-24drives/i2c/designware: incorporate device_operations supportAaron Durbin
In ramstage the device_operations are needed for the i2c designware host controller. Move the intel/common/block/i2c implementation into the generic driver so other platforms can take advantage of it. BUG=b:72121803 Change-Id: Id249933fadcc016bfba00e7a6d65f56dfc220724 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-01-24drivers/i2c/designware: namespace soc functionsAaron Durbin
Rename the following functions to ensure it's clear that the designware i2c host controller driver is the one that these functions are associated with: i2c_get_soc_cfg() -> dw_i2c_get_soc_cfg() i2c_get_soc_early_base() -> dw_i2c_get_soc_early_base() i2c_soc_devfn_to_bus() -> dw_i2c_soc_devfn_to_bus() i2c_soc_bus_to_devfn() -> dw_i2c_soc_bus_to_devfn() BUG=b:72121803 Change-Id: Idb7633b45a0bb7cb7433ef5f6b154e28474a7b6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23371 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-24device/i2c_bus: allow i2c_bus and i2c_simple to coexistAaron Durbin
If one wants to implement both i2c_bus.h and i2c_simple.h APIs the compilation unit needs to be guarded or coordinated carefully with different compilation units. Instead, name the i2c_bus functions with _dev such that it indicates that they operate on struct device. One other change to allow i2c_bus.h to be built in non-ramstage environments is to ensure DEVTREE_CONST is used for the dev field in struct bus. BUG=b:72121803 Change-Id: I267e27e62c95013e8ff8b0728dbe9e7b523de453 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-23drivers/i2c/max98373: Add driver for generating device in SSDTN, Harshapriya
Add a device driver to generate the device and required properties into the SSDT for max98373. TEST=verified SSDT contained relevant params BUG=None Change-Id: Id45f74e52855f4b19276e1d3d673d5448207ef4b Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by: N, Harshapriya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/22673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-18security/tpm: Change TPM naming for different layers.Philipp Deppenwiese
* Rename tlcl* to tss* as tpm software stack layer. * Fix inconsistent naming. Change-Id: I206dd6a32dbd303a6d4d987e424407ebf5c518fa Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-18security/tpm: Move tpm TSS and TSPI layer to security sectionPhilipp Deppenwiese
* Move code from src/lib and src/include into src/security/tpm * Split TPM TSS 1.2 and 2.0 * Fix header includes * Add a new directory structure with kconfig and makefile includes Change-Id: Id15a9aa6bd367560318dfcfd450bf5626ea0ec2b Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-22ic2/designware: Move Intel i2c logic to shared driverChris Ching
BUG=b:70232394 BRANCH=none TEST=emerge-reef coreboot emerge-glados Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-22drivers/i2c/tpm/cr50: Simplify and increase init delay to 30 secondsDuncan Laurie
The Cr50 i2c driver provides separate entry points for probing and initialization, but probing function does not really do much. It also claims and releases locality on every coreboot stage, but there is no need for this - locality should be definitely claimed after reset and then it could be retained through the boot process. On top of that the driver does not properly account for long time it could take the Cr50 chip to come around to reset processing if TPM reset request was posted during a lengthy TPM operation. This patch addresses the issues as follows: - tpm_vendor_probe() and tpm_vendor_cleanup() become noops, kept around to conform to the expected driver API. - tpm_vendor_init() invokes a function to process TPM reset only in the first stage using TPM (typically verstage), the function checks if locality is claimed and if so - waits for it to be released, which indicates that TPM reset processing is over. - before claiming locality check if it is already taken, and if so - just proceed. BRANCH=none BUG=b:65867313, b:68729265 TEST=Verified that reef no longer hangs during EC reboot and firmware_Cr50ClearTPMOwner (not yet merged) tests. Change-Id: Iba8445caf1342e3a5fefcb2664b0759a1a8e84e3 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-09drivers/i2c/tpm/cr50: Increase init delay to 30 secondsDuncan Laurie
In case the TPM is doing a long crypto operation the initial probe could be very delayed. Rather than end up in recovery make the delay long enough to accommodate the (current) long crypto times. BUG=b:65867313, b:68729265 TEST=Verified that Soraka no longer hangs during EC reboot test. Change-Id: I3bccff70e001dfc065c24be8ad34ef239a144db1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07src: Fix all Siemens copyrightsMario Scheithauer
Some Siemens copyright entries incorrectly contain a dot at the end of the line. This is fixed with this patch. Change-Id: I8d98f9a7caad65f7d14c3c2a0de67cb636340116 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-09-26Use stopwatch_wait_until_expired where applicableJonathan Neuschäfer
Change-Id: I4d6c6810b91294a7e401a4a1a446218c04c98e55 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-09-14device: acpi_name() should take a const struct deviceAaron Durbin
There's no reason to mutate the struct device when determining the ACPI name for a device. Adjust the function pointer signature and the respective implementations to use const struct device. Change-Id: If5e1f4de36a53646616581b01f47c4e86822c42e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-06driver/i2c/max98927: Add imon and vmon paramsHarsha Priya
This change list adds imon and vmon slot numbers as params for Maxim 98927 driver. These values are looked up in the kernel driver to confiure IV feedback for audio playback on speakers. BUG=b:36724448 TEST=After boot, the register dump for Max98927 codecs should have imon and vmon slots numbers set in 0x1e register. Change-Id: I21d72ba91af83782587f11018b2d1d1c8d4f676c Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/21195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-30acpigen: Add stop gpio control to power resourceFurquan Shaikh
There is at least one I2C device (being used by Soraka) that has 3 controls -- enable, reset and stop. If the stop gpio is not put into the right state when turning off the device in suspend mode, then it causes leakage. Thus, we need control in power resource to be able to stop the device when entering suspend state. BUG=b:64987428 TEST=Verified on soraka that touchscreen stop is correctly configured on suspend. Change-Id: Iae5ec7eb3972c5c7f80956d60d0d3c321bbefb0f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21249 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-30drivers/i2c/ck505: Add generic driver to configure clockgenArthur Heymans
Replaces the ics/954309 driver with a more generic version to accommodate clockgens with a different amount of registers. It also features a mask to only touch certain bits of the clockgen. TODO: set appropriate mask for X60/T60 since the datasheets for their clockgens can be found. Change-Id: Ie43c4de7891a39f2f443e78213ecd688134e68d7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-30drivers/i2c/generic: Support additional device propertiesDuncan Laurie
Add support for providing additional free form device properties via devicetree in order to make this driver suitable for kernel drivers that need additional board-specific device properties. This currently allows adding up to 10 additional properties to a device. BUG=b:63413023 TEST=manual testing to ensure that newly added properties are in SSDT Change-Id: I2b8ceb208f4aba01053746547def6d07c8f8f3a2 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/21270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18drivers/i2c/rx6110sa: Drop I2C interface arbitrationNico Huber
Change-Id: Ib31e77eec639c231520198c0b978d6c3c1eadaed Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-14i2c: Move to Linux like `struct i2c_msg`Nico Huber
Our current struct for I2C segments `i2c_seg` was close to being compa- tible to the Linux version `i2c_msg`, close to being compatible to SMBus and close to being readable (e.g. what was `chip` supposed to mean?) but turned out to be hard to fix. Instead of extending it in a backwards compatible way (and not touching current controller drivers), replace it with a Linux source compatible `struct i2c_msg` and patch all the drivers and users with Coccinelle. The new `struct i2c_msg` should ease porting drivers from Linux and help to write SMBus compatible controller drivers. Beside integer type changes, the field `read` is replaced with a generic field `flags` and `chip` is renamed to `slave`. Patched with Coccinelle using the clumsy spatch below and some manual changes: * Nested struct initializers and one field access skipped by Coccinelle. * Removed assumption in the code that I2C_M_RD is 1. * In `i2c.h`, changed all occurences of `chip` to `slave`. @@ @@ -struct i2c_seg +struct i2c_msg @@ identifier msg; expression e; @@ ( struct i2c_msg msg = { - .read = 0, + .flags = 0, }; | struct i2c_msg msg = { - .read = 1, + .flags = I2C_M_RD, }; | struct i2c_msg msg = { - .chip = e, + .slave = e, }; ) @@ struct i2c_msg msg; statement S1, S2; @@ ( -if (msg.read) +if (msg.flags & I2C_M_RD) S1 else S2 | -if (msg.read) +if (msg.flags & I2C_M_RD) S1 ) @@ struct i2c_msg *msg; statement S1, S2; @@ ( -if (msg->read) +if (msg->flags & I2C_M_RD) S1 else S2 | -if (msg->read) +if (msg->flags & I2C_M_RD) S1 ) @@ struct i2c_msg msg; expression e; @@ ( -msg.read = 0; +msg.flags = 0; | -msg.read = 1; +msg.flags = I2C_M_RD; | -msg.read = e; +msg.flags = e ? I2C_M_RD : 0; | -!!(msg.read) +(msg.flags & I2C_M_RD) | -(msg.read) +(msg.flags & I2C_M_RD) ) @@ struct i2c_msg *msg; expression e; @@ ( -msg->read = 0; +msg->flags = 0; | -msg->read = 1; +msg->flags = I2C_M_RD; | -msg->read = e; +msg->flags = e ? I2C_M_RD : 0; | -!!(msg->read) +(msg->flags & I2C_M_RD) | -(msg->read) +(msg->flags & I2C_M_RD) ) @@ struct i2c_msg msg; @@ -msg.chip +msg.slave @@ struct i2c_msg *msg; expression e; @@ -msg[e].chip +msg[e].slave @ slave disable ptr_to_array @ struct i2c_msg *msg; @@ -msg->chip +msg->slave Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-09drivers/i2c: Add driver for rt5663 codecDuncan Laurie
This commit adds a new driver for the RT5663 codec to use instead of the generic i2c driver. Since the kernel needs additional driver-specific device properties we need a BIOS driver that can provide those properties. The kernel driver devicetree properties for this codec are at: linux/Documentation/devicetree/bindings/sound/rt5663.txt This was tested by booting and verifying the generated SSDT contains the expected device properties in _DSD. Scope (\_SB.PCI0.I2C4) { Device (RT53) { Name (_HID, "10EC5663") Name (_UID, Zero) Name (_DDN, "Realtek RT5663 Codec") Method (_STA, 0, NotSerialized) { Return (0x0F) } Name (_CRS, ResourceTemplate () { I2cSerialBus (0x0013, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C4", 0x00, ResourceConsumer) GpioInt (Edge, ActiveBoth, Exclusive, PullDefault, 0x0000, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer) { 0x0051 } }) Name (_DSD, Package (0x02) { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package (0x05) { Package (0x02) { "irq-gpios", Package (0x04) { \_SB.PCI0.I2C4.RT53, Zero, Zero, Zero } }, Package (0x02) { "realtek,dc_offset_l_manual", 0x00FFD160 }, Package (0x02) { "realtek,dc_offset_r_manual", 0x00FFD1C0 }, Package (0x02) { "realtek,dc_offset_l_manual_mic", 0x00FF8A10 }, Package (0x02) { "realtek,dc_offset_r_manual_mic", 0x00FF8AB0 } } }) } } Change-Id: I3425fcbe13c9a5987fc91086d283a86db55c0819 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-08-08rx6110sa: Make sure that VLF bit will be clearedWerner Zeh
Ensure that the VLF bit will be cleared after a power loss event even if the stopwatch has expired before the code to clear the bit is reached. Change-Id: Ib2cfdabf4cd4df834395d6a102c6ae70568e71db Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-07-28src/drivers: Fix checkpatch warning: no spaces at the start of a lineMartin Roth
This excludes files which are mostly spaces, which I felt should be handled separately. Change-Id: I33043a3090e2fc6e9d2fd81e8a5e46fb6cb0aa35 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-30rx6110sa: Add a software reset sequence in case of power lossWerner Zeh
According to the datasheet the RTC needs a power rising slope of no more than 100µs/V to ensure a correct power-on reset. If the mainboard that hosts the RTC cannot guarantee this, a software reset sequence is needed in the case where the battery was drained completely. As the rising slope of the power supply depends on so many parameters and is highly mainboard specific, refactor the initialization code to perform a software reset every time a power loss event is recognized by the RTC. Change-Id: If64d672e51667523058041bd00e1e50ac047143d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-09rx6110sa: Add more chip configuration options to chipWerner Zeh
The RTC RX6110SA has several configuration options which might be interesting to set. To make this setup independent of the driver itself but let it still be configurable on mainboard level, add more configuration options to the chip driver. Change-Id: I7f8b2aa7cd001a887f271be36f655e10e60e778b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/20084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-05-31rx6110sa: Add possibility to use both I2C and SMBus for the RTCWerner Zeh
The driver for the RTC RX6110SA is designed to be used with I2C bus. This patch adds the possibility to use SMBus operations to access the RTC. For this purpose the Kconfig switch RX6110SA_USE_SMBUS is added. It is not enabled per default so that I2C will be used. One can set this switch on board level to use SMBus instead. Change-Id: I4827ae2c544e8002399d94a1159acacd8176c5e9 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19978 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-11drivers/i2c: Add new driver for RTC type RX6110 SAMario Scheithauer
This driver enables the usage of the external RTC chip RX6110 SA (http://www5.epsondevice.com/en/products/i2c/rx6110sab.html) which is connected to the I2C bus. The I2C address of this device is fixed. One can change parameters in the device tree so that the used setup can be adapted to match the configuration of the device on the mainboard. Change-Id: I1290a10c2d5ad76a317c99c8b92a013309a605d6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-04-24drivers/i2c/tpm: Remove vendor.irqDaniel Kurtz
The vendor.irq field was originally intended for use as the TPM 1.2 "command complete" interrupt. However, all actual coreboot tpm drivers and hardware use the vendor.status method of checking command completion instead, and this irq field is not used. Let's just remove this unused functionality to simplify the code. BRANCH=none BUG=b:36786804 TEST=Boot reef w/ serial enabled firmware, verify verstage sees "cr50 TPM" and does not complain about lack of tis_plat_irq_status(). TEST=Boot eve w/ serial enabled firmware, verify verstage sees "cr50 TPM" and does not complain about lack of tis_plat_irq_status(). Change-Id: I994c5bfbd18124af9cb81d9684117af766ab0124 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/19396 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 20:26:13 +0000