summaryrefslogtreecommitdiff
path: root/src/drivers/spi
AgeCommit message (Collapse)Author
2018-09-02src/drivers/spi/tpm: Fix typo & capitalize TPM and IRQElyes HAOUAS
Change-Id: Ifb1e024821153865dd4a27a100f8a9c61151e0e1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-08-25Revert "drivers/spi/spi_flash: don't allocate unbounded stack memory"Patrick Georgi
This reverts commit c5ee35ff861fe4447fd80119f645fba7bfd3a184. Reason for revert: breaks boards, uncertain if it _really_ works. Change-Id: I9ba2ba877b9a391306f89295c0c1d0e2d011c5ea Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28338 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jean Lucas <jean@4ray.co> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-23drivers/spi/spi_flash: don't allocate unbounded stack memoryPatrick Georgi
This open-codes flash_cmd, but until the API is fixed for real, it uses xfer's existing scatter-gather ability to write command and data in one go. BUG=chromium:446201 TEST=emerge-coral coreboot succeeds Change-Id: Ic81b7c9f7e0f2647e59b81d61abd68d36051e578 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-13driver/spi/stmicro: add 3.3V variant of N25Q032Stefan Tauner
Unfortunately stmicro.c does not distinguish the 1.8V version from the 3.3V versions (yet) although they have distinct RDIDs. I have at least ordered the ID macros accordingly and used a proper name in this patch. Change-Id: Id4fd8d46dcc9e51c1ae5504a32c2f8c5cfd863a1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/27861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-08-09drivers/spi/spi_flash.c: Check input parameterRichard Spiegel
In procedure spi_flash_cmd_erase(), parameter "len" is not validated and could lead to the return of an invalid (non-initialized) value. Validate the parameter early on. BUG=b:112253891 TEST=Build and boot grunt. Change-Id: I0b5129a15c9e0ea45f4dba4ab0729196cb64699b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09drivers/spi/winbond: Improve structure packingPatrick Rudolph
Use bitfields to pack the struct more tightly. Change-Id: If1e7a5a3a9504327f987403ec0a7b79b2383792a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/27815 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-16drivers/spi: Add Winbond W25Q80Kyösti Mälkki
This is a small 8 megabit (1 MiB) part. Change-Id: I9890457d0d14beb17d0a428c2701e620ae8c2512 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-14driver/spi/macronix.c: Add MX25L8005Arthur Heymans
Change-Id: I595198d66193c63f6c80c39371fbec10065d2165 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-11drivers/spi: Remove Kconfig prompt from SPI_FLASH_SMMNico Huber
Why would that be a user visible option? Drop the prompt and the `default n` and select it automatically when needed. I hope I caught all its users. TEST=Confirmed that systems with ELOG_GSMI or DEBUG_SMI compile and link. Change-Id: I44aeec530cc333f4ed4c8cfe67c7b5c9d8fb0049 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-11drivers/spi: Treat all stages commonly when adding driversNico Huber
Clean it up and add all flash chip drivers to postcar stage thereby. There seem to be SPI controllers that don't need the individual flash chip drivers. For those postcar support was added in b6b1b23 (console/flashconsole: Enable support for postcar). However for SPI controllers that need the individual drivers (i.e. those with CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y), linking of the postcar stage was broken. For all other stages, the set of compilation units stays the same. Change-Id: Ib8bdb824bfcf2d31ac696e39f797c4355b765756 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26871 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11drivers/spi: Remove DEBUG_SMI guardNico Huber
Let the linker take care of it. Change-Id: I67d2636ceb042f833c1b44888b98135d728940e0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-02src/drivers: Add reset/enable/stop_off_ms variables to ACPI devicesShelley Chen
Some touchscreens need to adhere to certain timings during the power off sequence as well as during the power on sequence. Adding reset_off_delay_ms, enable_off_delay_ms, and stop_off_delay_ms to accommodate these devices. BUG=b:78311818 BRANCH=None TEST=./util/abuild/abuild -p none -t google/poppy -x -a Change-Id: Idb4a5dbe56eee4749d2f2b514e92c28fb2c6078f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/25882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-23drivers/spi: reduce confusion in the APIAaron Durbin
Julius brought up confusion about the current spi api in [1]. In order alleviate the confusion stemming from supporting x86 spi flash controllers: - Remove spi_xfer_two_vectors() which was fusing transactions to accomodate the limitations of the spi controllers themselves. - Add spi_flash_vector_helper() for the x86 spi flash controllers to utilize in validating driver/controller current assumptions. - Remove the xfer() callback in the x86 spi flash drivers which will trigger an error as these controllers can't support the api. [1] https://mail.coreboot.org/pipermail/coreboot/2018-April/086561.html Change-Id: Id88adc6ad5234c29a739d43521c5f344bb7d3217 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-03spi: Add helper functions for bit-bangingJulius Werner
Sometimes when bringing up a new board it can take a while until you have all the peripheral drivers ready. For those cases it is nice to be able to bitbang certain protocols so that you can already get further in the boot flow while those drivers are still being worked on. We already have this support for I2C, but it would be nice to have something for SPI as well, since without SPI you're not going to boot very far. This patch adds a couple of helper functions that platforms can use to implement bit-banging SPI with minimal effort. It also adds a proof of concept implementation using the RK3399. Change-Id: Ie3551f51cc9a9f8bf3a47fd5cea6d9c064da8a62 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-01drivers/spi/flashconsole.c: Fix broken headerArthur Heymans
Change-Id: I61d28791fa75a32591448fc2c40186acfddca86d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/25413 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-20driver/spi: Warn when probed SF size differs from CONFIG_ROM_SIZEArthur Heymans
Some assumptions are made with respect to CONFIG_ROM_SIZE being the actual size of the boot medium, e.g. when automatically creating an fmap with and RW_MRC_CACHE region. With this patch the user is warned when this is detected. Change-Id: Ib5d6cc61ea29214d338d4c52ff799d6620a9cac7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-30drivers/spi: support cmd opcode deduction for spi_crop_chunk()Aaron Durbin
spi_crop_chunk() currently supports deducting the command length when determining maximum payload size in a transaction. Add support for deducting just the opcode part of the command by replacing deduct_cmd_len field to generic flags field. The two enums supported drive the logic within spi_crop_chunk(): SPI_CNTRLR_DEDUCT_CMD_LEN SPI_CNTRLR_DEDUCT_OPCODE_LEN All existing users of deduct_cmd_len were converted to using the flags field. BUG=b:65485690 Change-Id: I771fba684f0ed76ffdc8573aa10f775070edc691 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23491 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-26drivers/spi/spi_flash: honor spi controller fifo size for readsAaron Durbin
The spi_flash_cmd_read_fast() and spi_flash_cmd_read_slow() were just passing full size buffers to the spi controller ops. However, the code wasn't honoring what the spi controller can actually perform. This would cause failures to read on controllers when large requests were sent in. Fix this by introducing a spi_flash_cmd_read_array_wrapped() function that calls spi_flash_cmd_read_array() in a loop once the maximum transfer size is calculated based on the spi controller's settings. BUG=b:65485690 Change-Id: I442d6e77a93fda411cb289b606189e490a4e464e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-18security/tpm: Change TPM naming for different layers.Philipp Deppenwiese
* Rename tlcl* to tss* as tpm software stack layer. * Fix inconsistent naming. Change-Id: I206dd6a32dbd303a6d4d987e424407ebf5c518fa Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-01-18security/tpm: Move tpm TSS and TSPI layer to security sectionPhilipp Deppenwiese
* Move code from src/lib and src/include into src/security/tpm * Split TPM TSS 1.2 and 2.0 * Fix header includes * Add a new directory structure with kconfig and makefile includes Change-Id: Id15a9aa6bd367560318dfcfd450bf5626ea0ec2b Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-12-18spi/tpm: Clear pending irqs during tpm2_initShelley Chen
Seeing some instances were cr50 spi driver is starting a new transaction without getting a ready interrupt from cr50, which means that there are pending interrupts. Clearing these to be sure there are not any stale irqs for the next transaction. BUG=b:69567837 BRANCH=None TEST=run FAFT and see if any 0x2b recovery boots occur Change-Id: Ie099da9f2b3c4da417648ae10a5ba356b7a093ff Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-15drivers/spi/spi_flash: add flash region protection to controllerAaron Durbin
Provide a spi controller specific protection callback to take advantage of special spi flash controllers that have internal protection registers built into the implementation. It's an optional callback for spi controllers. BUG=b:69614064 Change-Id: Ie50a6ce3bbda32620a25dd26fda1af944940bf28 Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-14drivers/spi: Enable flashconsole in verstageDuncan Laurie
Enable the flashconsole driver in verstage so it can be used with VBOOT enabled. This was tested on a VBOOT enabled system using flashconsole to store the boot log. Change-Id: Icd8a82dc962ece85b9fb3d2f5654369e821922eb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/22855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-28spi/tpm.c do not waste time on wake pulses unless necessaryVadim Bendebury
The Cr50 secure chip implementation is guaranteed not to fall asleep for 1 second after any SPI slave activity. Let's not waste time on the wake up ping when it is not necessary. BRANCH=cr50 BUG=b:68012381 TEST=using a protocol analyzer verified that the wake pulses are generated only when the new coreboot stage or depthcharge start, not on every SPI slave transaction. Change-Id: Id8def1470ba3eab533075b9e7180f8a58e0b00b6 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-21spi/tpm: claim locality just once during bootVadim Bendebury
All coreboot stages using TPM start with the same sequence: check if locality is claimed, if so, release it by writing 'active locality' bit, then try claiming it. This is actually not a proper procedure: section "5.5.2.3.1 Command Aborts" of "TCG PC Client Platform TPM Profile (PTP) Specification Level 00 Revision 00.430 Family 2" lists overwriting active locality status bit as a means of triggering TPM command abort. On top of that, none of the coreboot stages releases locality, it is enough to claim it once when device starts booting. In fact, locality being active when the device is in verstage is most likely due to delayed TPM reset processing by the Cr50 TPM: reset is an asynchronous event, and is processed once current command processing completes. The proper procedure is to wait if locality is active until it is released (which will happen when Cr50 processes reset) and then proceed to claim it. This needs to happen only during verstage, other stages using TPM are guaranteed has been claimed earlier. BRANCH=gru BUG=b:65867313 TEST=the new autotest triggering EC reset during key generation process does not cause boot failures on Fizz device any more. Below are times verstage had to wait: TPM ready after 3132 ms TPM ready after 22120 ms TPM ready after 4936 ms TPM ready after 6445 ms TPM ready after 11798 ms TPM ready after 27421 ms TPM ready after 4582 ms TPM ready after 7532 ms TPM ready after 27920 ms TPM ready after 3539 ms TPM ready after 12557 ms TPM ready after 6773 ms TPM ready after 1631 ms TPM ready after 197 ms TPM ready after 24330 ms TPM ready after 3241 ms Change-Id: Iaee04f009bcde03712483e5e03de4a3441ea32b1 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-16drivers/spi/tpm: Poll TPM_VALID bit until validShelley Chen
In case the TPM is doing a long crypto operation the initial probe could be very delayed. Rather than end up in recovery make the delay long enough to accommodate the (current) long crypto times. This would add a maximum of 30 seconds to boot time. Mirroring changes done on i2c side in CL:756918 BUG=b:65867313, b:68729265 BRANCH=None TEST=Make sure fizz boots up Change-Id: Ie944bfb6fe33d6e9ee794439165716ab624be491 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-01spi/tpm: Make sure AP properly syncs up with Cr50Vadim Bendebury
When Cr50 TPM is being reset, it continues replying to the SPI bus requests, sends wrong register values in response to read requests. This patch makes sure that the TPM driver does not proceed unless proper value is read from the TPM device identification register. If the read value is still wrong after 10 retries taken with 10 ms intervals, the driver gives up and declares TPM broken/unavailable. BRANCH=cr50 BUG=b:68012381 TEST=ran a script resetting the Fizz device as soon as the "index 0x1007 return code 0" string shows up in the AP console output. The script keeps rebooting the Fizz indefinitely, before this script Fizz would fail to read TPM properly and fall into recovery after no more than four reboots. Change-Id: I7e67ec62c2bf31077b9ae558e09214d07eccf96b Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/22231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-16console/flashconsole: Enable support for postcarYouness Alaoui
If FSP 2.0 is used, then postcar stage is used and the flashconsole as well as spi drivers needed to be added. Change-Id: I46d720a9d1fe18a95c9407d08dae1eb70ae6720e Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/21959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-14device: acpi_name() should take a const struct deviceAaron Durbin
There's no reason to mutate the struct device when determining the ACPI name for a device. Adjust the function pointer signature and the respective implementations to use const struct device. Change-Id: If5e1f4de36a53646616581b01f47c4e86822c42e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-30acpigen: Add stop gpio control to power resourceFurquan Shaikh
There is at least one I2C device (being used by Soraka) that has 3 controls -- enable, reset and stop. If the stop gpio is not put into the right state when turning off the device in suspend mode, then it causes leakage. Thus, we need control in power resource to be able to stop the device when entering suspend state. BUG=b:64987428 TEST=Verified on soraka that touchscreen stop is correctly configured on suspend. Change-Id: Iae5ec7eb3972c5c7f80956d60d0d3c321bbefb0f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21249 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-02drivers/spi: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: If80e0c4e1c9911b44853561b03aef1c741255229 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27drivers/spi: Don't disable non-existent warnings on clangStefan Reinauer
The warning -Wstack-usage= doesn't seem to exist on clang, so trying to disable it makes the compiler unhappy about non-existent pragmas. Catching this on gcc is good enough, so let's disable it for the clang case Change-Id: Ia3716a83ba41743ac1dbe73e70abd170de30d7ab Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-04console/flashsconsole: Add spi flash console for debuggingYouness Alaoui
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem messages to the 'CONSOLE' area in FMAP which allows us to grab the log when we read the flash. This is useful when you don't have usb debugging, and UART lines are hard to find. Since a failure to boot would require a hardware flasher anyways, we can get the log at the same time. This feature should only be used when no alternative is found and only when we can't boot the system, because excessive writes to the flash is not recommended. This has been tested on purism/librem13 v2 and librem 15 v3 which run Intel Skylake hardware. It has not been tested on other archs or with a driver other than the fast_spi. Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24drivers/spi/spi-generic: Make spi_setup_slave strong symbolFurquan Shaikh
Now that all platforms are updated to provide spi bus map, there is no need to keep the spi_setup_slave as a weak symbol. BUG=b:38430839 Change-Id: I59b9bbb5303dad7ce062958a0ab8dee49a4ec1e0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19781 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash: Move flash ops to spi_flash_ops structureFurquan Shaikh
Define a new spi_flash_ops structure, move all spi flash operations to this structure and add a pointer to this structure in struct spi_flash. BUG=b:38330715 Change-Id: I550cc4556fc4b63ebc174a7e2fde42251fe56052 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Clean up SPI flash probeFurquan Shaikh
1. Rename __spi_flash_probe to spi_flash_generic_probe and export it so that drivers can use it outside spi_flash.c. 2. Make southbridge intel spi driver use spi_flash_generic_probe if spi_is_multichip returns 0. 3. Add spi_flash_probe to spi_ctrlr structure to allow platforms to provide specialized probe functions. With this change, the specialized spi flash probe functions are now associated with a particular spi ctrlr structure and no longer disconnected from the spi controller. BUG=b:38330715 Change-Id: I35f3bd8ddc5e71515df3ef0c1c4b1a68ee56bf4b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-19drivers/spi/spi_flash: Pass in spi_slave structure as const to probe functionsFurquan Shaikh
Pointer to spi_slave structure can be passed in as const to spi flash probe functions since the probe functions do not need to modify the slave properties. BUG=b:38330715 Change-Id: I956ee777c62dbb811fd6ce2aeb6ae090e1892acd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19707 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash_internal: Remove unused spi_fram_probe_ramtronFurquan Shaikh
Remove unused function declaration spi_fram_probe_ramtron. BUG=b:38330715 Change-Id: I05e6c5c2b97d6c8a726c0e443ad855f9bcb703f9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19706 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash: Pass in flash structure to fill in probeFurquan Shaikh
Instead of making all SPI drivers allocate space for a spi_flash structure and fill it in, udpate the API to allow callers to pass in a spi_flash structure that can be filled by the flash drivers as required. This also cleans up the interface so that the callers can maintain and free the space for spi_flash structure as required. BUG=b:38330715 Change-Id: If6f1b403731466525c4690777d9b32ce778eb563 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Add page_size to struct spi_flashFurquan Shaikh
Add a new member page_size to spi_flash structure so that the various spi flash drivers can store this info in spi_flash along with the other sizes (sector size and total size) during flash probe. This removes the need to have {driver}_spi_flash structure in every spi flash driver. This is part of patch series to clean up the SPI flash and SPI driver interface. BUG=b:38330715 Change-Id: I0f83e52cb1041432b0b575a8ee3bd173cc038d1f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Use boot_device_spi_flash to obtain spi_flash structureFurquan Shaikh
Instead of storing spi flash device structure in spi flash driver, use boot_device_spi_flash callback to obtain pointer to boot device spi flash structure. BUG=b:38330715 Change-Id: Idd50b7644d1a4be8b62d38cc9239feae2215103c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/cbfs_spi: Provide implementation of boot_device_spi_flashFurquan Shaikh
This allows callers to retrieve handle to the boot device spi_flash structure. BUG=b:38330715 Change-Id: I1c07327115e0449cbd84d163218da76a6fa2cea0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-04-24drivers/spi/tpm: Do not let MAINBOARD_HAS_SPI_TPM_CR50 depend on SPI_TPMDaniel Kurtz
MAINBOARD_HAS_SPI_TPM_CR50 describes a capability of the board and SPI_TPM is only on if we actually want to compile in the TPM code. For example, in src/drivers/i2c/tpm/Kconfig MAINBOARD_HAS_I2C_TPM_CR50 also doesn't depend on SPI_TPM. This problem manifests itself as the following build issue when building with MAINBOARD_HAS_I2C_TPM_CR50 but without an explict "select TPM2": src/Kconfig:296:error: recursive dependency detected! src/Kconfig:296: symbol MAINBOARD_HAS_TPM2 is selected by MAINBOARD_HAS_TPM_CR50 src/Kconfig:408: symbol MAINBOARD_HAS_TPM_CR50 depends on MAINBOARD_HAS_SPI_TPM_CR50 src/drivers/spi/tpm/Kconfig:15: symbol MAINBOARD_HAS_SPI_TPM_CR50 depends on SPI_TPM src/drivers/spi/tpm/Kconfig:1: symbol SPI_TPM depends on TPM2 src/Kconfig:396: symbol TPM2 is selected by MAINBOARD_HAS_TPM2 MAINBOARD_HAS_SPI_TPM_CR50 shouldn't depend on SPI_TPM. BRANCH=none BUG=b:36786804 TEST=Boot rowan w/ serial enabled, verify coreboot and depthcharge are configured to use IRQ flow control when talking to the Cr50 TPM. Change-Id: I0cb3f6d3aa4159bad563a6a4b006d7f4825e04b4 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Suggested-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19411 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-24drivers/spi/spiconsole: Fix broken spiconsole driverFurquan Shaikh
Use spi_setup_slave to fill up the spi_slave structure with pointer to spi_ctrlr structure which can then be used to perform all spi operations. Change-Id: I2804ed1e85402426a654352e1ceaf0993546cd8b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19385 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-04-13drivers/spi/tpm: Clean up SPI TPM driverFurquan Shaikh
1. Move common TIS macros to include/tpm.h. 2. Use common TIS macros while referring to status and access registers. 3. Add a new function claim_locality to properly check for required access bits and claim locality 0. BUG=b:36873582 Change-Id: I11bf3e8b6e1f50b7868c9fe4394a858488367287 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19213 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-04-09drivers/spi: Get rid of spi_get_configFurquan Shaikh
There is only one user for spi_get_config i.e. SPI ACPI. Also, the values provided by spi_get_config are constant for now. Thus, get rid of the spi_get_config call and fill in these constant values in SPI ACPI code itself. If there is a need in the future to change these, appropriate device-tree configs can be added. BUG=b:36873582 Change-Id: Ied38e2670784ee3317bb12e542666c224bd9e819 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19203 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-05drivers/spi/tpm: Allow TPM_SPI to be used with PC80_SYSTEM.Furquan Shaikh
In order to be able to use SPI TPM on x86, allow TPM_SPI to be used with PC80_SYSTEM. BUG=b:35583330 Change-Id: Ibe626a192d45cf2624368db42d369202a4003123 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19093 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 05:01:19 +0000