summaryrefslogtreecommitdiff
path: root/src/drivers/spi
AgeCommit message (Collapse)Author
2017-07-02drivers/spi: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Some of these can be changed from #if to if(), but that will happen in a follow-on commmit. Change-Id: If80e0c4e1c9911b44853561b03aef1c741255229 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27drivers/spi: Don't disable non-existent warnings on clangStefan Reinauer
The warning -Wstack-usage= doesn't seem to exist on clang, so trying to disable it makes the compiler unhappy about non-existent pragmas. Catching this on gcc is good enough, so let's disable it for the clang case Change-Id: Ia3716a83ba41743ac1dbe73e70abd170de30d7ab Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/20383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-04console/flashsconsole: Add spi flash console for debuggingYouness Alaoui
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem messages to the 'CONSOLE' area in FMAP which allows us to grab the log when we read the flash. This is useful when you don't have usb debugging, and UART lines are hard to find. Since a failure to boot would require a hardware flasher anyways, we can get the log at the same time. This feature should only be used when no alternative is found and only when we can't boot the system, because excessive writes to the flash is not recommended. This has been tested on purism/librem13 v2 and librem 15 v3 which run Intel Skylake hardware. It has not been tested on other archs or with a driver other than the fast_spi. Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24drivers/spi/spi-generic: Make spi_setup_slave strong symbolFurquan Shaikh
Now that all platforms are updated to provide spi bus map, there is no need to keep the spi_setup_slave as a weak symbol. BUG=b:38430839 Change-Id: I59b9bbb5303dad7ce062958a0ab8dee49a4ec1e0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19781 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash: Move flash ops to spi_flash_ops structureFurquan Shaikh
Define a new spi_flash_ops structure, move all spi flash operations to this structure and add a pointer to this structure in struct spi_flash. BUG=b:38330715 Change-Id: I550cc4556fc4b63ebc174a7e2fde42251fe56052 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Clean up SPI flash probeFurquan Shaikh
1. Rename __spi_flash_probe to spi_flash_generic_probe and export it so that drivers can use it outside spi_flash.c. 2. Make southbridge intel spi driver use spi_flash_generic_probe if spi_is_multichip returns 0. 3. Add spi_flash_probe to spi_ctrlr structure to allow platforms to provide specialized probe functions. With this change, the specialized spi flash probe functions are now associated with a particular spi ctrlr structure and no longer disconnected from the spi controller. BUG=b:38330715 Change-Id: I35f3bd8ddc5e71515df3ef0c1c4b1a68ee56bf4b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-19drivers/spi/spi_flash: Pass in spi_slave structure as const to probe functionsFurquan Shaikh
Pointer to spi_slave structure can be passed in as const to spi flash probe functions since the probe functions do not need to modify the slave properties. BUG=b:38330715 Change-Id: I956ee777c62dbb811fd6ce2aeb6ae090e1892acd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19707 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash_internal: Remove unused spi_fram_probe_ramtronFurquan Shaikh
Remove unused function declaration spi_fram_probe_ramtron. BUG=b:38330715 Change-Id: I05e6c5c2b97d6c8a726c0e443ad855f9bcb703f9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19706 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-19drivers/spi/spi_flash: Pass in flash structure to fill in probeFurquan Shaikh
Instead of making all SPI drivers allocate space for a spi_flash structure and fill it in, udpate the API to allow callers to pass in a spi_flash structure that can be filled by the flash drivers as required. This also cleans up the interface so that the callers can maintain and free the space for spi_flash structure as required. BUG=b:38330715 Change-Id: If6f1b403731466525c4690777d9b32ce778eb563 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Add page_size to struct spi_flashFurquan Shaikh
Add a new member page_size to spi_flash structure so that the various spi flash drivers can store this info in spi_flash along with the other sizes (sector size and total size) during flash probe. This removes the need to have {driver}_spi_flash structure in every spi flash driver. This is part of patch series to clean up the SPI flash and SPI driver interface. BUG=b:38330715 Change-Id: I0f83e52cb1041432b0b575a8ee3bd173cc038d1f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/spi_flash: Use boot_device_spi_flash to obtain spi_flash structureFurquan Shaikh
Instead of storing spi flash device structure in spi flash driver, use boot_device_spi_flash callback to obtain pointer to boot device spi flash structure. BUG=b:38330715 Change-Id: Idd50b7644d1a4be8b62d38cc9239feae2215103c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-19drivers/spi/cbfs_spi: Provide implementation of boot_device_spi_flashFurquan Shaikh
This allows callers to retrieve handle to the boot device spi_flash structure. BUG=b:38330715 Change-Id: I1c07327115e0449cbd84d163218da76a6fa2cea0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-04-24drivers/spi/tpm: Do not let MAINBOARD_HAS_SPI_TPM_CR50 depend on SPI_TPMDaniel Kurtz
MAINBOARD_HAS_SPI_TPM_CR50 describes a capability of the board and SPI_TPM is only on if we actually want to compile in the TPM code. For example, in src/drivers/i2c/tpm/Kconfig MAINBOARD_HAS_I2C_TPM_CR50 also doesn't depend on SPI_TPM. This problem manifests itself as the following build issue when building with MAINBOARD_HAS_I2C_TPM_CR50 but without an explict "select TPM2": src/Kconfig:296:error: recursive dependency detected! src/Kconfig:296: symbol MAINBOARD_HAS_TPM2 is selected by MAINBOARD_HAS_TPM_CR50 src/Kconfig:408: symbol MAINBOARD_HAS_TPM_CR50 depends on MAINBOARD_HAS_SPI_TPM_CR50 src/drivers/spi/tpm/Kconfig:15: symbol MAINBOARD_HAS_SPI_TPM_CR50 depends on SPI_TPM src/drivers/spi/tpm/Kconfig:1: symbol SPI_TPM depends on TPM2 src/Kconfig:396: symbol TPM2 is selected by MAINBOARD_HAS_TPM2 MAINBOARD_HAS_SPI_TPM_CR50 shouldn't depend on SPI_TPM. BRANCH=none BUG=b:36786804 TEST=Boot rowan w/ serial enabled, verify coreboot and depthcharge are configured to use IRQ flow control when talking to the Cr50 TPM. Change-Id: I0cb3f6d3aa4159bad563a6a4b006d7f4825e04b4 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Suggested-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19411 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-24drivers/spi/spiconsole: Fix broken spiconsole driverFurquan Shaikh
Use spi_setup_slave to fill up the spi_slave structure with pointer to spi_ctrlr structure which can then be used to perform all spi operations. Change-Id: I2804ed1e85402426a654352e1ceaf0993546cd8b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19385 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-04-13drivers/spi/tpm: Clean up SPI TPM driverFurquan Shaikh
1. Move common TIS macros to include/tpm.h. 2. Use common TIS macros while referring to status and access registers. 3. Add a new function claim_locality to properly check for required access bits and claim locality 0. BUG=b:36873582 Change-Id: I11bf3e8b6e1f50b7868c9fe4394a858488367287 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19213 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-04-09drivers/spi: Get rid of spi_get_configFurquan Shaikh
There is only one user for spi_get_config i.e. SPI ACPI. Also, the values provided by spi_get_config are constant for now. Thus, get rid of the spi_get_config call and fill in these constant values in SPI ACPI code itself. If there is a need in the future to change these, appropriate device-tree configs can be added. BUG=b:36873582 Change-Id: Ied38e2670784ee3317bb12e542666c224bd9e819 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19203 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-05drivers/spi/tpm: Allow TPM_SPI to be used with PC80_SYSTEM.Furquan Shaikh
In order to be able to use SPI TPM on x86, allow TPM_SPI to be used with PC80_SYSTEM. BUG=b:35583330 Change-Id: Ibe626a192d45cf2624368db42d369202a4003123 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19093 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05drivers/spi/tpm: Make SPI TPM driver CAR-safeFurquan Shaikh
1. Use proper CAR semantics for global/static variables. 2. Use spi_* functions directly instead of using a global structure to store pointers to those functions. BUG=b:36873582 Change-Id: I1fc52ab797ef0cbd3793a387d68198efc5dde58c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19114 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05drivers/spi/tpm: using tpm irq to sync tpm transactionJeffy Chen
BUG=b:35647967 TEST=boot from bob Change-Id: Ib64107b17fb6e93dbe626ce92f3bc9da8b84784e Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-on: https://chromium-review.googlesource.com/452284 Commit-Ready: Caesar Wang <wxt@rock-chips.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19113 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05drivers/spi/tpm: try to wake cr50 if it is asleepJeffy Chen
BUG=b:35775002 TEST=boot from bob Change-Id: I6324f3c02da55a8527f085ba463cbb1f4fb5dc2e Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-on: https://chromium-review.googlesource.com/452283 Commit-Ready: Caesar Wang <wxt@rock-chips.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19112 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-05drivers/spi/tpm: Add tis.c and tpm.c to ramstage and romstageFurquan Shaikh
These files are required to support recovery MRC cache hash save/restore in romtage/ramstage. BUG=b:35583330 Change-Id: Idd0a4ee1c5f8f861caf40d841053b83a9d7aaef8 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19092 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-03drivers/spi/tpm: honor tis_sendrecv() APIAaron Durbin
The spi tis_sendrecv() implementation was always returning success for all transactions. Correct this by returning -1 on error when tpm2_process_command() returns 0 since that's its current failure return code. BUG=b:36598499 Change-Id: I8bfb5a09198ae4c293330e770271773a185d5061 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19058 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-03drivers/spi/tpm: make tpm_info object local to compilation unitAaron Durbin
The tpm_info object is a global, but its symbol does not need to be exposed to the world as its only used within tpm.c. BUG=b:36598499 Change-Id: Idded3dad8d0d1c3535bddfb359009210d3439703 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19057 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-04-03drivers/spi/tpm: de-assert chip select on transaction errorAaron Durbin
In the case of start_transaction() failing the chip select is never deasserted. Correct that by deasserting the chip select when start_transaction() fails. BUG=b:36598499 Change-Id: I2c5200085eb357259edab39c1a0fa7b1d81ba7b2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19056 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-09drivers/spi/tpm: provide Kconfig to indicate CR50 usageAaron Durbin
Going forward it's important to note when a CR50 is expected to be present in the system. Additionally, this Kconfig addition provides symmetry with the equivalent i2c Kconfig option. BUG=b:35775104 Change-Id: Ifbd42b8a22f407534b23459713558c77cde6935d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18680 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-02-19drivers/spi/acpi: Add additional generic ACPI supportDuncan Laurie
Add support for more ACPI features in the generic SPI ACPI driver so it can be flexible enough to support more devices, or devices in different configurations. - add a wake pin - add support for using IRQ GPIO instead of PIRQ - add power resource support with enable and reset gpios BUG=chrome-os-partner:61233 TEST=ensure existing SSDT generation is unchanged, and test that new features generate expected code Change-Id: Ibe37cc87e488004baa2c08a369f73c86e6cd6dce Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18393 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-16drivers/spi: Add support for generating SPI device in SSDTFurquan Shaikh
Similar to I2C driver, add support for generating SPI device and required properties in SSDT for ACPI. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles succesfully. Verified SPI device generated in SSDT on poppy. Change-Id: Ic4da79c823131d54d9eb3652b86f6e40fe643ab5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18342 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-16spi: Add function callback to get configuration of SPI busFurquan Shaikh
Add a new callback to spi_ctrlr structure - get_config - to obtain configuration of SPI bus from the controller driver. Also, move common config definitions from acpi_device.h to spi-generic.h BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I412c8c70167d18058a32041c2310bc1c884043ce Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18337 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-01-10SPI: Fix command-response behaviorKyösti Mälkki
Fix SPI flash ops regressions after commit: c2973d1 spi: Get rid of SPI_ATOMIC_SEQUENCING When spi_flash_cmd() is called with argument response==NULL, only send out command without reading back the response. Change-Id: I28a94f208b4a1983d45d69d46db41391e267891d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18082 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-19drivers/spi: fix flash writes at page boundariesAaron Durbin
There was an assumption that all SPI controllers could consume a full page of data to write. However, that assumption doesn't hold when spi_crop_chunk() indicates sizes smaller than page size. If the requested offset isn't page aligned from the start then writes will fail corrupting data since a page boundary isn't honored. The spansion driver needed quite a bit more work to honor the spi_crop_chunk() result. It now mimics the other driver's code. Also, needed to add spi_crop_chunk() to marvell/bg4cd SoC to make google/cosmos build. SPI obviously doesn't work on that platform, but it fixes the build error. Change-Id: I93e24a5a717adcee45a017c164bd960f4592ad50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17910 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-16tpm2: handle failures more gracefullyVadim Bendebury
When trying to bring up a device with a malfunctioning TPM2 chip, the driver currently gets stuck waiting for SPI flow control, causing bricked devices. This patch puts a 100 ms cap on the waiting time - this should be enough even for a longest NVRAM save operation which could be under way on the TPM device. BRANCH=gru BUG=chrome-os-partner:59807 TEST=with a matching change in depthcharge, now a gru with corrupted SPI TPM comes up to the recovery screen (it was not showing signs of life before this change). Change-Id: I63ef5dde8dddd9afeae91e396c157a1a37d47c80 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/17898 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-08drivers/spi: provide a mechanism to obtain the SPI flash boot deviceAaron Durbin
The MRC cache wants to be able to access the SPI flash boot device. Allow an easy way to provide that so that there isn't duplicate spi_flash objects representing the same device. BUG=chrome-os-partner:56151 Change-Id: Iba92e8bb8a6060cdd327b10f5f8ec23ac61101e7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17715 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-07spi: Clean up SPI driver interfaceFurquan Shaikh
1. Add new structure spi_ctrlr_buses that allows platform to define a mapping from SPI controller to buses managed by the controller. 2. Provide weak implementations of spi_init and spi_setup_slave that will be used by platforms using the new interface. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia6f47941b786299f4d823895898ffb1b36e02f73 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17561 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06spi_flash: Make a deep copy of spi_slave structureFurquan Shaikh
Commit 36b81af (spi: Pass pointer to spi_slave structure in spi_setup_slave) changes the way spi_setup_slave handles the spi_slave structure. Instead of expecting spi controller drivers to maintain spi_slave structure in CAR_GLOBAL/data section, caller is expected to manage the spi_slave structure. This requires that spi_flash drivers maintain spi_slave structure and flash probe function needs to make a copy of the passed in spi_slave structure. This change fixes the regression on Lenovo X230 and other mainboards. Change-Id: I0ad971eecaf3bfe301e9f95badc043193cc27cab Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17728 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Iru Cai <mytbk920423@gmail.com>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Get rid of flash_programmer_probe in spi_slave structureFurquan Shaikh
flash_programmer_probe is a property of the spi flash driver and does not belong in the spi_slave structure. Thus, make spi_flash_programmer_probe a callback from the spi_flash_probe function. Logic still remains the same as before (order matters): 1. Try spi_flash_programmer_probe without force option 2. Try generic flash probing 3. Try spi_flash_programmer_probe with force option If none of the above steps work, fail probing. Flash controller is expected to honor force option to decide whether to perform specialized probing or to defer to generic probing. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17465 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Get rid of max_transfer_size parameter in spi_slave structureFurquan Shaikh
max_transfer_size is a property of the SPI controller and not of the spi slave. Also, this is used only on one SoC currently. There is no need to handle this at the spi flash layer. This change moves the handling of max_transfer_size to SoC SPI driver and gets rid of the max_transfer_size parameter. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: I19a1d0a83395a58c2bc1614b24518a3220945a60 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17463 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-06spi: Add a way to show SPI transfer speed for readsSimon Glass
SPI read speed directly impacts boot time and we do quite a lot of reading. Add a way to easily find out the speed of SPI flash reads within coreboot. Write speed is less important since there are very few writes and they are small. BUG=chrome-os-partner:56556 BRANCH=none TEST=run on gru with SPI_SPEED_DEBUG set to 1. See the output messages: read SPI 627d4 7d73: 18455 us, 1740 KB/s, 13.920 Mbps Change-Id: Id3814bd2b7bd045cdfcc67eb1fabc861bf9ed3b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 82cb93f6be47efce3b0a3843bab89d2381baef89 Original-Change-Id: Iec66f5b8e3ad62f14d836a538dc7801e4ca669e7 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376944 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16701 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-24drivers/spi: remove unconditional RW boot device initializationAaron Durbin
The SPI drivers for the various chipsets are not consistent in their handling of when they are accessible. Coupled with the unknown ordering of boot_device_init() being called this can lead to unexpected behavior (probing failures or hangs). Instead move the act of initializing the SPI flash boot device to when the various infrastructure requires its usage when it calls boot_device_rw(). Those platforms utilizing the RW boot device would need to ensure their SPI drivers are functional and ready when the call happens. This further removes any other systems failing to boot as reported in https://ticket.coreboot.org/issues/67. BUG=chrome-os-partner:56151 Change-Id: Ib3bddf5e26bf5322f3dd20345eeef6bee40f0f66 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16300 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-08-23drivers/spi: be sure to call spi_init() before spi_flash_probe()Aaron Durbin
It's necessary to call spi_init() prior to calling spi_flash_probe() such that the SPI drivers can do any work required prior to performing SPI transactions. It could be argued that the drivers should handle such situations, however the SPI API implementations seem to assume the callers ensured spi_init() was called before any SPI transactions. This fixes systems that failed to boot introduced by [1]. Issue tracked in https://ticket.coreboot.org/issues/67. [1] I2aa75f88409309e3f9b9bd79b52d27c0061139c8 https://review.coreboot.org/16200 BUG=chrome-os-partner:56151 Change-Id: I2d8d5ac685833521f1efe212b07a4b61ba0d9bc3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16297 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-08-19drivers/spi: provide optional implementation of boot_device_rw()Aaron Durbin
On many x86 platforms the boot device is SPI which is memory mapped. However, in order to write to the boot device one needs to use the SPI api. Therefore, provide a common implementation of boot_device_rw() which has no mmap() functionality. It only reads, writes, and erases. This will be used in the existing infrastructure but in a SPI agnostic way. Two options are added: 1. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP 2. BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY The former is auto-selected when COMMON_CBFS_SPI_WRAPPER is not selected. The latter can be used to include the implementation in the early stages such as bootblock, verstage, and romstage. BUG=chrome-os-partner:56151 Change-Id: I2aa75f88409309e3f9b9bd79b52d27c0061139c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16200 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19drivers/spi: include SPI flash modules for all stagesAaron Durbin
It shouldn't matter if COMMON_CBFS_SPI_WRAPPER is selected to include the SPI flash support in all stages. Therefore, include the SPI flash support files in all the stages. While there include the same set of files for all stages. They were out of sync for some reason. BUG=chrome-os-partner:56151 Change-Id: I933335104203315cbbcf965185a7c176974e6356 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16198 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-19drivers/spi: ensure SPI flash is boot device for coreboot tablesAaron Durbin
The spi_flash_probe() routine was setting a global varible unconditonally regardless if the probe was for the boot device or even if the boot devcie was flash. Moreover, there's no need to report the SPI information if the boot device isn't even SPI. Lastly, it's possible that the boot device is a SPI flash, but the platform may never probe (selecting SPI_FLASH) for the actual device connected. In that situation don't fill anything in as no correct information is known. BUG=chrome-os-partner:56151 Change-Id: Ib0eba601df4d77bede313c358c92b0536355bbd0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16197 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-19lib/cbfs_spi: provide boot_device_rw() supportAaron Durbin
Provide the RW boot device operations for the common cbfs SPI wrapper. The RW region_device is the same as the read-only one. As noted in the boot_device_rw() introduction patch the mmap() support should not be used in conjuction with writing as that results in incoherent operations. That's fine as the current mmap() support is only used in the cbfs layer which does not support writing, i.e. no cbfs regions would be written to with any previous or outstanding mmap() calls. BUG=chrome-os-partner:56151 Change-Id: I7cc7309a68ad23b30208ac961b1999a79626b307 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16199 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-27 13:35:51 +0000