summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2016-08-18Kconfig: rename BOOT_MEDIA_SPI_BUS to BOOT_DEVICE_SPI_FLASH_BUSAaron Durbin
Provide a default value of 0 in drivers/spi as there weren't default values aside from specific mainboards and arch/x86. Remove any default 0 values while noting to keep the option's default to 0. BUG=chrome-os-partner:56151 Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16192 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-18Kconfig: lay groundwork for not assuming SPI flash boot deviceAaron Durbin
Almost all boards and chipsets within the codebase assume or use SPI flash as the boot device. Therefore, provide an option for the boards/chipsets which don't currently support SPI flash as the boot device. The default is to assume SPI flash is the boot device unless otherwise instructed. This falls in line with the current assumptions, but it also allows one to differentiate a platform desiring SPI flash support while it not being the actual boot device. One thing to note is that while google/daisy does boot with SPI flash part no SPI API interfaces were ever implemented. Therefore, mark that board as not having a SPI boot device. BUG=chrome-os-partner:56151 Change-Id: Id4e0b4ec5e440e41421fbb6d0ca2be4185b62a6e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16191 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-15Revert "Kconfig: separate memory mapped boot device from SPI"Aaron Durbin
This reverts commit a83bbf58541cf41ea7a97dedbc8c02dffa59e86d. This was submitted out of order. Change-Id: Ic5a28faf94c1f1901a72e46343722eb4224c5086 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16226 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-08-15drivers/spi: provide option to not include all flash driversAaron Durbin
All flash drivers are automatically included in the build unless COMMON_CBFS_SPI_WRAPPER was selected. However, there are cases where these drivers are unnecessary such as certain intel platforms where spi controller uses hardware sequencing without any ability to manually probe the device. Therefore, provide an option that the SoC can set the default value for. The COMMON_CBFS_SPI_WRAPPER option is still honored by not including all drivers when that is selected. BUG=chrome-os-partner:56151 Change-Id: Ie9aa447da450f7c8717545f05cff800139a9e2dd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16187 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-15Kconfig: separate memory mapped boot device from SPIAaron Durbin
Make the indication of the boot device being memory mapped separate from SPI. However, retain the same defaults that previously existed. BUG=chrome-os-partner:56151 Change-Id: Ibdd7c8754f9bf560a878136b1f55238e2c2549d3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16193 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-14drivers/elog: provide more debug infoAaron Durbin
Provide more informative messages when CONFIG_ELOG_DEBUG is enabled as well as more informative error messages in the case of elog_scan_flash() failing. In the sync path the in-memory buffer is dumped in before the contents are read back from the non-volatile backing store and dumped again if the subsequent parsing fails. BUG=chrome-os-partner:55932 Change-Id: I716adfb246ef6fbefc0de89cd94b3c1310468896 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16184 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-12drivers/intel/fsp2_0: Fix FSP reset pathLee Leahy
Don't verify HOB list pointer or HOBs when FSP returns a reset request. BRANCH=none BUG=chrome-os-partner:56159 TEST=Build and run on Galileo Gen2. Change-Id: I6382f5ff92092623955806ebff340608c4ee156a Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16162 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11intel/fsp1_1: Use new per-region position overridePatrick Georgi
It cooperates better with the file sorting heuristic. Change-Id: I1c071243720352970dd2c4c2afed12451f91dcaa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/16141 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-10drivers/intel/fsp2_0: Add fsp_write_line functionLee Leahy
Add fsp_write_line function which may be called by FSP to output debug serial data to the console. TEST=Build and run on Galileo Gen2 Change-Id: If7bfcea1af82209dcdc5a9f9f2d9334842c1595e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16129 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-10drivers/intel/fsp1_1: Add fsp_write_line functionLee Leahy
Add fsp_write_line function which may be called by FSP to output debug serial data to the console. TEST=Build and run on Galileo Gen2 Change-Id: Ib01aef448798e47ac613b38eb20bf25537b9221f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16128 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10elog: Ensure eventlog will always get initialized when configured inJulius Werner
Commit 0d9cd92e (chromeos: Clean up elog handling) removed the individual elog_init() calls from mainboards that did them and automated adding certain events through the boot state machine. Unfortunately, the new code would sometimes not log any specific event at all, and thereby also never call elog_init() (through elog_add_event()) which adds the "System boot" event. We can assume that any board that configures the eventlog at all actually wants to use it, so let's just add another call to elog_init() to the boot state machine so we can ensure it gets called at least once. BRANCH=None BUG=chrome-os-partner:56001 TEST=Booted Kevin, confirmed that eventlog code runs again. Change-Id: Ibe7bfc94b3e3d11ba881399a39f9915991c89d8c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16118 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-09drivers/elog: provide return status for all operationsAaron Durbin
Instead of relying on global state to determine if an error occurred provide the ability to know if an add or shrink operation is successful. Now the call chains report the error back up the stack and out to the callers. BUG=chrome-os-partner:55932 Change-Id: Id4ed4d93e331f1bf16e038df69ef067446d00102 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16104 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09drivers/elog: clean up SMBIOS related codeAaron Durbin
Don't conditionally compile parts of the code. The unused pieces get culled by the linker, and the #if's just clutter things up. BUG=chrome-os-partner:55932 Change-Id: Ic18b2deb0cfef7167c05f0a641eae2f4cdc848ee Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16102 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09drivers/elog: consolidate checks in elog_find_flash()Aaron Durbin
There were checks against global variables trying to determine failing cases of elog_find_flash(). Instead move the checks into elog_find_flash() and return value indicating failure. A minimum 4KiB check was added to ensure the eventlog is at least that size which makes the heuristic checks cleaner. BUG=chrome-os-partner:55932 Change-Id: I4d9d13148555e05d4f217a10f995831a0e437fc3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16101 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09drivers/elog: remove unnecessary global stateAaron Durbin
There were 3 variables indicating the state of the event log region. However, there's no need to keep track of those individually. The only thing required is to know is if elog_scan_flash() failed. There's no other tracking required beyond that. BUG=chrome-os-partner:55932 Change-Id: I88ad32091d3c37966a2ac6272f8ad95bcc8c4270 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16100 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-09drivers/elog: sync events to non-volatile storage lastAaron Durbin
There were multiple paths where writes and erases of the flash were being done. Instead provide a single place for synchronizing the non-volatile storage from the mirrored event log. This synchronization point resides as the very last thing done when adding an event to the log. The shrinking check happens before committing the event to non-volatile storage so there's no need to attempt a shrink in elog_init() because any previous events committed already honored the full threshold. BUG=chrome-os-partner:55932 Change-Id: Iaec9480eb3116fdc2f823c25d028a4cfb65a6eaf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16099 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-08drivers/elog: treat offsets relative to start of mirrorAaron Durbin
Instead of treating offsets relative to after the header make the offsets relative to the in-memory mirror buffer. This simplifies the logic in that all offsets are treated the same. It also allows one to remove a global variable. BUG=chrome-os-partner:55932 Change-Id: I42491e05755d414562b02b6f9ae47f5c357d2f8a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16098 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-08drivers/elog: use region_device for mirroring into ramAaron Durbin
A region_device can be used to represent the in-memory mirror of the event log. The region_device infrastructure has builtin bounds checking so there's no need to duplicate that. In addition, it allows for removing much of the math juggling for the buffer size, etc. BUG=chrome-os-partner:55932 Change-Id: Ic7fe9466019640b449257c5905ed919ac522bb58 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16097 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: use offsets for checking cleared buffersAaron Durbin
There's only 2 users of checking if the event buffer is cleared to the EOL value. Each were passing pointers of the in-memory mirror while also doing calculations for the size to check. Since the in-memory mirror is one big buffer the only thing required to know is the offset to start checking from. The check is always done through the end of the buffer. BUG=chrome-os-partner:55932 Change-Id: Icd4a7edc74407d6578fc93e9eb533abd3aa17277 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16096 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: perform writes in terms of offsetsAaron Durbin
Instead of taking pointers and back-calculating the proper offset perform writes in terms of the offsets within the elog region in flash. BUG=chrome-os-partner:55932 Change-Id: I5fd65423f5a6e03825c788bc36417f509b58f64d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16095 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-08-08drivers/elog: remove parameters from elog_flash_erase()Aaron Durbin
The elog_flash_erase() was only called to erase the entire elog region in flash. Therefore, drop the parameters and perform the full erase. BUG=chrome-os-partner:55932 Change-Id: I6590347ae60d407bc0df141e9196eb70532f8585 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16094 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: remove unnecessary check in elog_shrink()Aaron Durbin
There was a check against the next event offset against the shrink size in elog_shrink(). However, all calls to elog_shrink() were conditionalized on the next event offset exceeding the full threshold. The shrink size is set to the minimum of the full threshold and a percentage of the elog region size. Therefore, it's impossible for the next event offset to be less than the shrink size because full threshold is always greater than or equal to the shrink size. BUG=chrome-os-partner:55932 Change-Id: Ie6ff106f1c53c15aa36a82223a235a7ac97fd8c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16093 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: use event region size when adding a clear eventAaron Durbin
For the elog shrink case we log the number of bytes shrunk from the event log. However, when clearing the log the size recorded was the entire region size including the header as well as the event region space. To be more consistent mark the clearing event with the number of bytes actually cleared out (excluding the header size). BUG=chrome-os-partner:55932 Change-Id: I7c33da97bd29a90bfe975b1c6f148f181016f13f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16092 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08drivers/elog: remove unused functionAaron Durbin
get_rom_size() is no longer used. Remove it. BUG=chrome-os-partner:55932 Change-Id: Id9fa8f67b67ee355243a5c763cfafa0ce76e9b2b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16088 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-06drivers/intel/fsp1_1: only set a base address for FSP in COREBOOT CBFSAaron Durbin
The -b FSP_LOC argument to cbfstool is only valid for the COREBOOT CBFS. Don't pass that value for all other CBFS regions. Change-Id: Ib5321e7a7dbee8d26eb558933c8ce3fea50b11fe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14641 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-05drivers/intel/fsp2_0: Ensure EC is in right mode before memory initFurquan Shaikh
If EC_GOOGLE_CHROMEEC is enabled, ensure that the EC is in correct mode before running memory init. This saves additional memory training required in recovery path because of reboot later in ramstage. BUG=chrome-os-partner:54245 Change-Id: Ic71c054afdcd0001cea95563fe513783b56f3e60 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16034 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-05drivers/spi: Add support for Micron N25Q128AWerner Zeh
Although we have already support for the flash chip N25Q128 there is a similar type available which has the same geometry and opcodes but unfortunately a slightly different device type ID. While the already supported N25Q128 has the ID 0xbb18 this one has the ID 0xba18. To make both types available in the flash support table, use N25Q128A as the flash name. This name can be found in the datasheet which can be found here: https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-nor/n25q/n25q_128mb_3v_65nm.pdf TEST=Booted and verified that MRC cache could be written Change-Id: I02a47692efb23a9a06a289c367488abd256b8e0c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16061 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-05drivers/intel/fsp2_0: Add checklist supportLee Leahy
Add the Kconfig value to point to the checklist data files. TEST=Build and run on Galileo Gen2 Change-Id: I3737b46162214fad139382193de944ec5d175645 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16039 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03spi/tpm: read TPM version in larger chunksVadim Bendebury
The TPM version string has become much longer recently, and the TPM_FW_VER register available on VID 1ae0 devices supports reading in arbitrary size quantities. Let's read 50 bytes at a time to reduce the SPI register read wrapper overhead, and increase the length limit to 300 bytes to accommodate longer version strings. TEST=verified on the Kevin device: localhost ~ # grep cr50 /sys/firmware/log Firmware version: RO_A: 0.0.1/84e2dde7 RO_B:* 0.0.2/13eda43f RW_A:* cr50_v1.1.5005-444ddb7 RW_B: cr50_v1.1.5005-5aac83c cr50_v1.1.5005-444ddb7 private-cr51:v0.0.66-bd9a0fe tpm2:v0.0.259-8f3d735 cryptoc:v0.0.4-5319e83 2016-07-31 10:58:05 vbendeb@kvasha Change-Id: Ifaf28c1a9a3990372a9cec108c098edbe50d3243 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/16000 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03drivers/intel/fsp2_0: Update the debug levelsLee Leahy
Choose appropriate debug levels for the various messages in the FSP driver. Change: * BIOS_DEBUG --> BIOS_SPEW: Normal FSP driver output level, allows builder to disable FSP driver output by selecting CONFIG_DEFAULT_CONSOLE_LOGLEVEL_7 * BIOS_ERROR --> BIOS_CRIT: These errors will prevent coreboot and the payload from successfully booting TEST=Build and run on Galileo Gen2 Change-Id: Ic3352de2022e16482bf47fc953aedeef8f0c2880 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16003 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03drivers/intel/fsp2_0: Remove fsp_print_upd_info declarationLee Leahy
Remove unused function declaration. TEST=Build and run on Galileo Gen2 Change-Id: Id971829c19c2535c975a68c44fb3697f60d0b4ad Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16022 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03drivers/intel/fsp2_0: Disable display of FSP headerLee Leahy
Add a Kconfig value to enable display of FSP header. Move the display code into a separate module to remove it entirely from the final image. TEST=Build and run on Galileo Gen2 Change-Id: I7047a9e58e6a6481c8453dbfebfbfe69dc8823d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16002 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03drivers/intel/fsp2_0: Handle FspNotify callsLee Leahy
Other SOC platforms need to handle the FspNotify calls in the same way as Apollo Lake. Migrate the FspNotify calls into the FSP 2.0 driver. Provide a platform callback to handle anything else that needs to be done after the FspNotify call. Display the MTRRs before the first call to fsp_notify. TEST=Build and run on Galileo Gen2 Change-Id: I1ff327d77516d4ea212740c16c2514c2908758a2 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15855 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03drivers/intel/fsp2_0: FSP driver handles all FSP errorsLee Leahy
Move all FSP error handling into the FSP 2.0 driver. This removes the need to implement error handling within the SOC code. TEST=Build and run on Galileo Gen2 Change-Id: I4d548b4c90d369d3857c24f50f93e7db7e9d3028 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15853 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03drivers/intel/fsp2_0: Verify HOBs returned by FspMemoryInitLee Leahy
Verify that FSP is properly returning: * HOB list pointer * FSP_BOOTLOADER_TOLUM_HOB * FSP_RESERVED_MEMORY_RESOURCE_HOB TEST=Build and run on Galileo Gen2 Change-Id: I23005d10f7f3ccf06a2e29dab5fa11c7ed79f187 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15850 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03drivers/intel/fsp2_0: Add display HOB supportLee Leahy
Add support to display the HOBs returned by FSP: * Add Kconfig value to enable HOB display * Move hob_header, hob_resource and uuid_name structures into util.h * Move hob_type enum into util.h * Remove static from the debug utility functions * Add fsp_ prefix to the debug utility functions * Declare the debug utility functions in debug.h * Add HOB type name table * Add more GUID values * Add new GUID name table for additional GUIDs * Add routine to convert EDK-II GUID into a name * Add SOC specific routine to handle unknown GUID types * Add routine to convert HOB type into a name * Add SOC specific routine to handle unknown HOB types * Add routine to display the hobs TEST=Build and run on Galileo Gen2 Change-Id: I10606d752859fff0f4f08a5ac03ab129b2c96d1f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15851 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03drivers/intel/fsp2_0: Add UPD display supportLee Leahy
Add UPD display support: * Add a Kconfig value to enable UPD value display * Add a routine to display a UPD value * Add a call before MemoryInit to display the UPD parameters * Add a routine to display the architectural parameters for MemoryInit * Add a weak routine to display the other UPD parameters for MemoryInit * Add a call before SiliconInit to display the UPD parameters * Add a weak routine to display the UPD parameters for SiliconInit TEST=Build and run on Galileo Gen2. Change-Id: I35fb8410c0bccf217b32af4b8bbe5ad6671f81f6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15847 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-03drivers/intel/fsp2_0: Monitor FSP setting of MTRRsLee Leahy
Display the MTRR values in the following locations: * Before the call to FspMemoryInit to document coreboot settings * After the call to FspMemoryInit * Before the call to FspSiliconInit * After the call to FspSiliconInit * After the call to FspNotify * Before the call to FspNotify added in patch 15855 TEST=Build and run on Galileo Gen2 Change-Id: I8942ef4ca4677501a5c38abaff1c3489eebea53c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15849 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-02drivers/fsp2_0: Increment boot count for non-S3 bootFurquan Shaikh
If ELOG_BOOT_COUNT is enabled and the boot is not s3 resume, then increment boot count. BUG=chrome-os-partner:55473 Change-Id: Ib3e77180bd640ec0424978e73034d7c99cdcba95 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15948 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
2016-08-02drivers/intel/fsp2_0: Display FSP calls and statusLee Leahy
Disable the chatty FSP behavior for normal builds. Use a Kconfig value to enable the display of the FSP call entry points, the call parameters and the returned status for MemoryInit, SiliconInit and FspNotify. The debug code is placed into drivers/intel/fsp2_0/debug.c. TEST=Build and run on Galileo Gen2 Change-Id: Iacae66f72bc5b4ba1469f53fcce4669726234441 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15989 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-02i2c/w83795: Fix chip type messagePatrick Georgi
(val & 4) == 1 is always false. Since val & 4 is either zero or non-zero, just drop the second test (for "== 1"). Validated against the data sheet that this is really the right register, bit and value. Change-Id: I627df9a9b4fddfff486689e405f52a3b54135eef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1241864 Reviewed-on: https://review.coreboot.org/16009 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31src/drivers: Capitalize CPU, RAM and ACPIElyes HAOUAS
Change-Id: I720469ea1df75544f5b1e0cab718502d8a9cf197 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15983 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31intel/wifi: Include conditionally in the buildKyösti Mälkki
Keep this enabled by default as most x86 platforms could have PCI-e slots equipped with one of these Intel WiFi adapters. The Kconfig entries under google boards had no function previously, the variable was never referenced. Change-Id: I728ce3fd83d51d4e5e32b848a2079c5fcee29349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15931 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-28drivers/intel/fsp2_0: Update the copyrightsLee Leahy
Update the copyright dates in the FSP 2.0 files. Add a copyright to Kconfig. TEST=Build and run on Galileo Gen2 Change-Id: I0ad0c5650bde0e31d01a04bcc7d22a19273fe29b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15852 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-28intel/fsp1_1: Add C entry support to locate FSP Temp RAM InitSubrata Banik
FSP temp ram init was getting called earlier from ROMCC bootblock. Now with C entry boot block, it is needed to locate FSP header and call FspTempRamInit. Hence add fsp 1_1 driver code to locate FSP Temp ram and execute. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built kunimitsu and ensure FSP Temp Ram Init return success Change-Id: If40b267777a8dc5c473d1115b19b98609ff3fd74 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15787 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28i2c/ww_ring: Add ww_ring files to ramstageFurquan Shaikh
These files are required by storm and gale boards for enabling elog support in ramstage. BUG=chrome-os-partner:55639 Change-Id: I2bbfee2acf2bfe2f896a8619b1276dcea1b87f16 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15893 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28bootmode: Get rid of CONFIG_BOOTMODE_STRAPSFurquan Shaikh
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and developer mode check functions to vboot. Thus, get rid of the BOOTMODE_STRAPS option which controlled these functions under src/lib. BUG=chrome-os-partner:55639 Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-26 07:13:23 +0000