summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2018-07-30drivers/i2c/da7219: Allow disabling micbias-pulse featureDaniel Kurtz
These two da7219_aad properties are optional: - dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV). [<2800>, <2900>] - dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms) When the Mic Bias Higher Voltage feature is not required, firmware should just not provide the dlg,micbias-pulse-lvl and dlg,micbias-pulse-time properties. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> BUG=b:111700809 TEST=On grunt: No "Invalid micbias pulse level" in dmesg Change-Id: Ie99a8962e78c68b3f6927d0de34168f265d4efa9 Reviewed-on: https://review.coreboot.org/27613 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Akshu Agrawal <akshu.agrawal@amd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-28security/tpm: Add TCPA logging functionalityPhilipp Deppenwiese
* TCG spec only applies to BIOS or UEFI. * Therefore implement coreboot TCPA compliant log in CBMEM. * Write CBMEM log into the coreboot table for CBMEM tool access Change-Id: I0a52494f647d21e2587231af26ed13d62b3a72f5 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25drivers/tpm: Add TPM ramstage driver for devices without vboot.Philipp Deppenwiese
Logic: If vboot is not used and the tpm is not initialized in the romstage makes use of the ramstage driver to initialize the TPM globally without having setup calls in lower SoC level implementations. * Add TPM driver in ramstage chip init which calls the tpm_setup function. * Purge all occurrences of TPM init code and headers. * Only compile TIS drivers into ramstage except for vboot usage. * Remove Google Urara/Rotor TPM support because of missing i2c driver in ramstage. Change-Id: I7536c9734732aeaa85ccc7916c12eecb9ca26b2e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24905 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-19drivers/intel/gma: Default to LVDS for Internal on NEHALEMArthur Heymans
Devices using NORTHBRIDGE_INTEL_NEHALEM have an ironlake IGD which does not support eDP, therefore default to LVDS. Change-Id: I669c7793a6f78d72899df21b74b9314ef39a29af Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27512 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-17security/vboot: Add interface for FSP 2.0 mrc cachingPhilipp Deppenwiese
* Move vboot/tpm specific implementation to vboot. * Only call functions if CONFIG_FSP2_0_USES_TPM_MRC_HASH is set. * Preparation for software hash function support, no logic changed. Change-Id: I41a458186c7981adaf3fea8974adec2ca8668f14 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24904 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-13intel/wifi: Add WGDS ACPI method for Geo Aware SARPratik Prajapati
To comply with all relevant bodies throughout the world, SAR settings take into account the lowest common denominator Tx power settings. This setup may lead to non-optimal performance when the user location is in a country that may allow higher power setting. The purpose of Wireless Geo Delta Settings (WGDS) is to provide offset settings for FCC, Europe, Japan and Rest of the world. These offsets would be added (by Intel wifi driver) to the base SAR Tx Power as defined in WRDS and EWRD BUG=b:65155728 BRANCH=none TEST=WGDS ACPI table gets created as expected. Change-Id: I4f602e3f95ff3545db6cc6e428beb9a36abd9296 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-09src/{device,drivers}: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ic1c9b1edd8d3206a68854107ddcbc5c51cb487c3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-06google: Use proper ACPI ID for Semtech chips: STHGwendal Grignou
Change-Id: I85cd567a923cccd2504f351aae276b5f0d9db4de Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-on: https://review.coreboot.org/27347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Delco <delco@google.com> Reviewed-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-03drivers/pc80/vga: Fix coding styleElyes HAOUAS
Change-Id: I0452407d1346ca8ead2638e2a31269931ea5d12e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-28drivers/intel/fsp2_0: Fix uncountable "information"Elyes HAOUAS
Change-Id: I91e13a786b12328f1d9200f76788faa19847bbe7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28vboot: Fix linking error with USE_OPTION_TABLE enabledPatrick Rudolph
Fix a linking problem with VBOOT and USE_OPTION_TABLE enabled. Make use of cbfs_locate_file_in_region() and always search the cmos_layout.bin in the 'COREBOOT' region. With this change applied there's no need to include the vboot_locator in SMM any more, we can't break NVRAM with different CMOS layouts, and we keep VBOOT and non VBOOT behaviour the same. Only include cmos_layout.bin and cmos.default in RO region. Add notes explaining the decisions. Tested on Intel Sandybridge, builds and boots with vboot enabled. Change-Id: I10ae94d7936581bbb5ea49384122062bd4934ea5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/26863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-27drivers/intel/fsp1_1: Fix vbt_len typeMatt DeVillier
Type of vbt_len should be size_t, change to fix compiler error Change-Id: I22798fa0edb98fcb9acc1b2dd52f34a61bc511e9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-25mb/google/kahlee/variants/grunt: Select low-power mode for BayHub720Simon Glass
Put the PCIe clock pins in power-saving mode for the BayHub eMMC bridge to save power. This requires use of an additional register (Misc control register 2) and another bit in the existing 'protect' register. The naming of bit 0 of that register is incorrect, based on the latest datasheet (14 June 2018) so fix that too. BUG=b:73726008 BRANCH=none TEST=boot without this patch: iotools mem_read32 0xfed80e00 0x0046ffff With this patch: $ iotools mem_read32 0xfed80e00 0x00463fff Also see that the PCIe clock stops when eMMC is idle and can be started by starting disk activity. Change-Id: I5ad1467b2e2e151215d2dfd2ce48cd4a451fe480 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-on: https://review.coreboot.org/26515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-24drivers/i2c/alps: Get rid of i2c/alps driverFurquan Shaikh
i2c/alps driver implementation is an exact copy of the i2c/hid driver with only the addition of ALPS0001_HID. This can be supported by the i2c/hid driver using the hid field in devicetree which is what glkrvp mainboard does. So, this change removes the i2c/alps driver which is anyways unused. Change-Id: I60761c384f3d800532b2b346272da7be28b77acd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-24drivers/i2c/sx9310: Check for config not being NULL before using itFurquan Shaikh
This change fixes the issue reported by Coverity CID 1393576 to ensure that config is checked for NULL before it is actually used. Change-Id: I5f0cd2bf2437fc640f4cf8d8203a971daf1f8d17 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22drivers/fsp1_1: fix VBT Loading by using GMA common functionMatt DeVillier
Commit 77034fa [intel/common: compress VBT] compressed vbt.bin in CBFS, but only changed the loader in soc/intel/common, forgetting the separate one used by FSP 1.1. As the soc/intel/common loader has now been rolled into the one in drivers/intel/gma, replace the VBT loader used by FSP 1.1 with the GMA one. Also, remove 2 now-unused header files. Test: build/boot google/chell, observe display initialized prior to OS load, no FSP warning in cbmem console due to invalid VBT signature. Change-Id: Iba882ee4d9e83dcd88bdf7dd2f5591f66005a3fe Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-22drivers/i2c: Add a driver for Semtech SX9310Enrico Granata
This adds a new driver for the SX9310 proximity detector device. The purpose of this is to enable the device's calibration information to be stored in firmware, and then transferred over to the kernel via ACPI. This device has more than 10 individual configuration parameters, so they would not fit in the generic driver's properties table. Change-Id: Id8c434eec9fe2da731e142442503a12e88db2236 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27173 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21drivers/ati/ragexl: Remove dead codeArthur Heymans
Is unused in the tree. Change-Id: I8a5308b6c7773d791d47832e620558394f1d727e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22132 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-16drivers/spi: Add Winbond W25Q80Kyösti Mälkki
This is a small 8 megabit (1 MiB) part. Change-Id: I9890457d0d14beb17d0a428c2701e620ae8c2512 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-14driver/spi/macronix.c: Add MX25L8005Arthur Heymans
Change-Id: I595198d66193c63f6c80c39371fbec10065d2165 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Use of device_t is deprecatedElyes HAOUAS
Change-Id: I9cebfc5c77187bd81094031c43ff6df094908417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14AGESA binaryPI: Drop tests for LATE_CBMEM_INITKyösti Mälkki
Change-Id: I4571e8b560559b3d7afe429eca8caa1512e244a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-12drivers/intel/gma: Unify VBT related Kconfig namesNico Huber
Shuffle words and drop the _DATA_FILE suffix. Change-Id: I0b0d50ea729e5580c0bc7b43f250ff387ce59cfc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-12drivers/i2c/generic: Ensure config is not NULL before accessing itFurquan Shaikh
This change checks to ensure that config is not NULL before it is accessed for the first time. Reported by: Coverity CID #1393312 Change-Id: Ic248c79783da9c2bfdf3b7f737e5963feff7558c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-11{src,util}: Use NULL instead of 0 for pointerElyes HAOUAS
Change-Id: I75fa4577055f25dde0a8b1044c005bba72cabd92 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-11drivers/spi: Remove Kconfig prompt from SPI_FLASH_SMMNico Huber
Why would that be a user visible option? Drop the prompt and the `default n` and select it automatically when needed. I hope I caught all its users. TEST=Confirmed that systems with ELOG_GSMI or DEBUG_SMI compile and link. Change-Id: I44aeec530cc333f4ed4c8cfe67c7b5c9d8fb0049 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-11drivers/spi: Treat all stages commonly when adding driversNico Huber
Clean it up and add all flash chip drivers to postcar stage thereby. There seem to be SPI controllers that don't need the individual flash chip drivers. For those postcar support was added in b6b1b23 (console/flashconsole: Enable support for postcar). However for SPI controllers that need the individual drivers (i.e. those with CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS=y), linking of the postcar stage was broken. For all other stages, the set of compilation units stays the same. Change-Id: Ib8bdb824bfcf2d31ac696e39f797c4355b765756 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26871 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11drivers/spi: Remove DEBUG_SMI guardNico Huber
Let the linker take care of it. Change-Id: I67d2636ceb042f833c1b44888b98135d728940e0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-08arch/x86: Drop leftover ROMCC console supportKyösti Mälkki
Change-Id: I3e52569a34e1f7bfea8be9da91348c364ab705e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-08libgfxinit: Enable G45 support (for GM45/X4X)Nico Huber
Change-Id: Ia637d32ffaa5d280320955d34141eddc8b7df981 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22222 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-06src/driver/i2c/{generic,hid,tpm,max}: Update device name based on devicetree.cbNaresh G Solanki
Name i2c device structure based on that in devicetree.cb Now log looks like: I2C: 01:0a (WCOM Touchscreen) I2C: 03:13 (Realtek RT5663) I2C: 03:39 (SSM4567 Right Speaker Amp) I2C: 03:3a (SSM4567 Left Speaker Amp) BUG=None BRANCH=None TEST=Build & boot Soraka Change-Id: I5dbb66ab705cd8601b8b1dc94bc6ee9f181b7be2 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/26830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
* Remove 2nd software stack in pc80 drivers directory. * Create TSPI interface for common usage. * Refactor TSS / TIS code base. * Add vendor tss (Cr50) directory. * Change kconfig options for TPM to TPM1. * Add user / board configuration with: * MAINBOARD_HAS_*_TPM # * BUS driver * MAINBOARD_HAS_TPM1 or MAINBOARD_HAS_TPM2 * Add kconfig TPM user selection (e.g. pluggable TPMs) * Fix existing headers and function calls. * Fix vboot for interface usage and antirollback mode. Change-Id: I7ec277e82a3c20c62a0548a1a2b013e6ce8f5b3f Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/24903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-04src/drivers: Get rid of whitespace before tabElyes HAOUAS
Change-Id: Ia9ca055679c0332613afb2bb2ed86df165de3baf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04src: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: Ib2bb6cc80ac2bdc389c60c7ffac4bba937f0fca8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-04drivers/generic/ioapic/ioapic.c: Remove unneeded includeElyes HAOUAS
Change-Id: I670702f092e49bac8d7733d6fa77861e28e09093 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-01drivers/intel/wifi: Add PCI ID for Intel TP2 Wi-FiFurquan Shaikh
This change adds PCI ID for Intel TP2 Wi-Fi and adds that to pci_device_ids in Intel wifi driver. Change-Id: I51abf615fca6001d564e7cd672cc16f3a0fb8dd6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-31i210: Add additional PCI-ID to the i210 driverWerner Zeh
When the i210 MACPHY is operated in the SERDES Backplane mode (which depends on the programmed firmware image), its PCI-ID will be 0x1537. This does however not change the programming interface for the MAC address. Therefore add this new PCI-ID to the driver so that the MAC address can be programmed in this operation mode as well. Change-Id: I608535202c49e40690381c2b2ab26322d62cfb37 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/26683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-05-31{cpu,drivers,nb,soc}/intel: Use CACHE_ROM_BASE where appropriateNico Huber
Change-Id: Ibc2392cd2a00fde3e15dda4d44c8b6874d7ac8a3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-05-31cpu/x86/mtrr: Get rid of CACHE_ROM_SIZE_OVERRIDENico Huber
As far as I can see this Kconfig option was used wrong ever since it was added. According to the commit message of 107f72e (Re-declare CACHE_ROM_SIZE as aligned ROM_SIZE for MTRR), it was only necessary to prevent overlapping with CAR. Let's handle the potential overlap in C macros instead and get rid of that option. Currently, it was only used by most FSP1.0 boards, and only because the `fsp1_0/Kconfig` set it to CBFS_SIZE (WTF?). Change-Id: I4d0096f14a9d343c2e646e48175fe2127198a822 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-28drivers/i2c/max98373: update DT property namesSathyanarayana Nujella
Upstream Kernel side codec driver expect DT properties to have 'maxim' prefix. Update accordingly while filling SSDT entries. BUG=b:79362472 TEST=dump DT properties in kerenl side and cross checked TEST=Audio playback works with this change Change-Id: Iaa4b14492dbb5a0087242f1485493f3192336f60 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/26532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-25elog: Only log POST code from previous boot on non-S3 resumeDaniel Kurtz
It doesn't make sense to log post codes from a previous (failed) boot if we are resuming from S3, since the previous boot has to have been successful in order to enter S3 in the first place. While we are at it, use a helper function to combine conditionals and improve readability. BUG=none TEST=boot, suspend & resume grunt Change-Id: I4f3bb8526a0c8c0ea1efd924628b33c147543b88 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26528 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25elog: Only print TYPE_BOOT on S3-resume if CONFIG_ELOG_BOOT_COUNTDaniel Kurtz
Previously, we were unconditionally adding a TYPE_BOOT message to the ELOG on every boot (even S3 resume) if CONFIG_ELOG_BOOT_COUNT was disabled. Now that boot_count_read() returns 0 for the !CONFIG_ELOG_BOOT_COUNT case, the code becomes a bit simpler. BUG=b:79865267 TEST=firmware_EventLog Change-Id: I803fa4c3e03b6cc94751cf0ce34b78021ae2124e Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/26527 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-25drivers/intel/fsp2_0: Make use of xmalloc for FSP-S UPDSubrata Banik
Don't allocate FSP-S UPD over stack. This patch reduces stack usage for Cannonlake platform. TEST=On CNL platform stack usage reduces from ~3.6KiB to ~1KiB. Change-Id: I07ef0db6720d7e6865ac1641ce2661009332907c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26501 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-22src: Remove non-ascii charactersMartin Roth
Change-Id: Iedb78e24a286a51830c85724af0179995ed553be Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-18drivers/usb/acpi: Add a driver for generating USB ACPIDuncan Laurie
Add a support for generating USB port descriptors for ACPI based on their definition by the board in devicetree.cb. This will generate a _UPC and _PLD for each port, using a generic _PLD by default. The _PLD can also be customized for more accurate descriptions if necessary. This sample devictree.cb shows a USB 2.0 type-A port behind a root hub connected to an xHCI controller: device pci 14.0 on chip drivers/usb/acpi register "desc" = ""Root Hub"" register "type" = "UPC_TYPE_HUB" device usb 0.0 on chip drivers/usb/acpi register "desc" = ""USB 2.0 Type-A"" register "type" = "UPC_TYPE_A" device usb 2.0 on end end end end end It will generate the following ACPI code in the SSDT: Scope (\_SB.PCI0.XHCI.RHUB.HS01) { Name (_DDN, "USB 2.0 Type-A") Name (_UPC, Package (0x04) { 0xFF, 0x00, Zero, Zero }) Name (_PLD, ToPLD ( PLD_Revision = 0x2, PLD_IgnoreColor = 0x1, PLD_Red = 0x0, PLD_Green = 0x0, PLD_Blue = 0x0, PLD_Width = 0x0, PLD_Height = 0x0, PLD_UserVisible = 0x1, PLD_Dock = 0x0, PLD_Lid = 0x0, PLD_Panel = "UNKNOWN", PLD_VerticalPosition = "CENTER", PLD_HorizontalPosition = "CENTER", PLD_Shape = "RECTANGLE", PLD_GroupOrientation = 0x0, PLD_GroupToken = 0x0, PLD_GroupPosition = 0x0, PLD_Bay = 0x0, PLD_Ejectable = 0x0, PLD_EjectRequired = 0x0, PLD_CabinetNumber = 0x0, PLD_CardCageNumber = 0x0, PLD_Reference = 0x0, PLD_Rotation = 0x0, PLD_Order = 0x0, PLD_VerticalOffset = 0x0, PLD_HorizontalOffset = 0x0) ) } Change-Id: I7024390e407fda4b195211bd4755bb5ca53b2b37 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26173 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-15ACPI: Set the correct number of arguments in ACPI methodsMartin Roth
These methods had unused arguments and could be corrected by setting the correct number in the method initializer. Change-Id: I86606cfa1c391e2221cee31994e83667fa9ead61 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-05-15drivers/net: Check "ethernet_mac" when the device index is 1David Wu
It is a special case for the Fizz firmware branch, when the device index is 1, it will check "ethernet_mac" first and then "ethernet_mac0". For single NIC: config.device_index = "1", maps to "ethernet_mac" For multiple NICs: config.device_index = "1", maps to "ethernet_mac0" BUG=b:77836343 BRANCH=Fizz TEST=Add device index in device tree && Program the mac address to VPD in shell vpd -s ethernet_mac=<mac address> or vpd -s ethernet-mac[0-9]=<mac address> && reboot the system. Ensure the MAC address was fetched correctly by ifconfig command. Change-Id: I67fd2e999c8f9d8782f294fcafa84b8da970a3a6 Signed-off-by: David Wu <david_wu@quantatw.com> Reviewed-on: https://review.coreboot.org/26051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-13drivers/pc80/tpm: get ioport from pnp recordsKevin Cody-Little
Had 0x2e hardcoded, which is often the SuperIO chip. Instead, pull the port from the PNP tree generated from devicetree.cb, where either 0x4e or 0x2e will be specified. Change-Id: I4a92693f8acd3a1618cefcdf6b25eb22a727e20f Signed-off-by: Kevin Cody-Little <kcodyjr@gmail.com> Reviewed-on: https://review.coreboot.org/26203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-05-11drivers/intel/gma: honor vbt_size parameter to locate_vbt()Aaron Durbin
In 4a3956d7 (drivers/intel/gma, soc/intel/common: improve cooperation) the vbt_size parameter was not honored leading to the use of unitialized variables from the caller. Instead, keep track of if the vbt is already loaded by using the size returned from the load. If it's non-zero the vbt has been loaded. BUG=b:79562868 Change-Id: Ia1c47f0d982fae74e0223922f83943c68a846aa9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/26236 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 19:51:24 +0000