summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2014-12-17elog: Fix chromium merge issueMarc Jones
This cleans up a mis-merge in elog.c and puts the following change back: drivers/elog: Unmangle header include out of pre-proc cond commit a3119e5835e4b8fd510d046c56a3bf2bf43a5c0d Change-Id: Iafbbd381efdb103717022d2a3c342da376a9428f Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7838 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17Revert "elog: Use the RTC driver interface instead of reading CMOS directly."Marc Jones
This reverts commit 474313d1b6556ad8b3e6750a4096b5735cbfc846. This reverted commit was applied out of sequence and there are a number of dependencies that need to be in place prior to adding it. Remove it for now. Change-Id: If80c40867098dee2feff2b9a1d824558f4d7028d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7837 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17spi_flash: Move (de-)assertion of /CS to single locationDavid Hendricks
This consolidates all calls to spi_claim_bus() and spi_release_bus() to a single location where spi_xfer() is called. This avoids confusing (and potentially redundant) calls that were being done throughout the generic spi_flash.c functions and chip-specific functions. I don't think the current approach could even work since many chip drivers assert /CS once and then issue multiple commands such as page program followed by reading the status register. I suspect the reason we didn't notice it on x86 is because the ICH/PCH handled each individual command correctly (spi_claim_bus() and spi_release_bus() are noops) in spite of the broken code. BUG=none BRANCH=none TEST=tested on nyan and link Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I3257e2f6a2820834f4c9018069f90fcf2bab05f6 Original-Reviewed-on: https://chromium-review.googlesource.com/194510 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit d3394d34fb49e9e252f67371674d5b3aa220bc9e) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ieb62309b18090d8f974f91a6e448af3d65dd3d1d Reviewed-on: http://review.coreboot.org/7829 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17spi_flash: Differentiate between atomic/manual sequencingDavid Hendricks
This adds a wrapper function and a Kconfig variable to differentiate between SPI controllers which use atomic cycle sequencing versus those where the transaction sequence is controlled manually. Currently this boils down to x86 vs. non-x86. Yes, it's hideous. The current API only worked because, for better or worse, x86 platforms have been homogeneous in this regard since they started using SPI as an alternative to FWH for boot flash. Now that we have non-x86 platforms which use general purpose SPI controllers, we should overhaul the entire SPI infrastructure to be more adaptable. BUG=none BRANCH=none TEST=tested on nyan and link Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: If8ccc9400a9d04772a195941a42bc82d5ecc1958 Original-Reviewed-on: https://chromium-review.googlesource.com/195283 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 4170c59d06206667755402712083452da9fcd941) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I54e2d3d9f9a0153a56f7a51b80f6ee6d997ad358 Reviewed-on: http://review.coreboot.org/7828 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17elog: Use the RTC driver interface instead of reading CMOS directly.Gabe Black
Use the RTC driver interface to find the timestamp for events instead of reading the CMOS based RTC directly on x86 or punting on ARM. This makes timestamps available on both architectures, assuming an RTC driver is available. BUG=None TEST=Built and booted on nyan_big and link and verified that the timestamps in the event log were accurate. BRANCH=nyan Original-Change-Id: Id45da53bc7ddfac8dd0978e7f2a3b8bc2c7ea753 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197798 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 493b05e06dd461532c9366fb09025efb3568a975) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8481adde86d836b5f0b019c815bada6d232a4186 Reviewed-on: http://review.coreboot.org/7833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17elog: Isolate some x86-ismsDavid Hendricks
This attempts to isolate/fix some x86-isms: - Translate flash offset to memory-mapped address only on x86. - Guard ACPI-dependent line of code - Use a Kconfig variable for SPI bus when probing the flash rather than assuming the bus is always on bus 0. - Zero-out timestamp on non-x86 until we have a better abstraction. (note: this is based off of some of Gabe's earlier work) BUG=none BRANCH=none TEST=needs testing Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I887576d8bcabe374d8684aa5588f738b36170ef7 Original-Reviewed-on: https://chromium-review.googlesource.com/191203 Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 1fc7a75f8c072098e017104788418aeed0705e93) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ida4b211cf21ecdde9745d4dbef6a63ffb9fbba8d Reviewed-on: http://review.coreboot.org/7832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17elog: Do not attempt to init SPIDavid Hendricks
This severs a dependency the eventlog code has on initializing chipset/SoC SPI controller. Currently elog_init() calls spi_init() as a catch-all. This worked for x86 since the SPI controller is only used for one thing on existing platforms. As we add eventlogging support to non-x86 platforms we need to consider the more generalized case where the assumptions about how SPI works on x86 are no longer valid. BUG=none BRANCH=none Signed-off-by: David Hendricks <dhendrix@chromium.org> TEST=built and booted on Link, Beltino and Rambi. See below for "mosys eventlog list" output on Link showing boot and suspend/resume events (including lid close/open) added successfully. localhost ~ # mosys eventlog list 0 | 2014-04-14 13:52:44 | Log area cleared | 4096 1 | 2014-04-14 13:52:44 | System boot | 50 2 | 2014-04-14 13:52:44 | EC Event | Power Button 3 | 2014-04-14 13:52:44 | SUS Power Fail 4 | 2014-04-14 13:52:44 | System Reset 5 | 2014-04-14 13:52:44 | ACPI Wake | S5 6 | 2014-04-14 13:53:25 | ACPI Enter | S3 7 | 2014-04-14 13:53:35 | ACPI Wake | S3 8 | 2014-04-14 13:53:35 | Wake Source | RTC Alarm | 0 9 | 2014-04-14 13:53:49 | ACPI Enter | S3 10 | 2014-04-14 13:54:00 | EC Event | Lid Open 11 | 2014-04-14 13:54:00 | ACPI Wake | S3 12 | 2014-04-14 13:54:00 | Wake Source | GPIO | 15 Original-Change-Id: I26e25c0a856f7b8db5ab6b8e7e1acae291d2eadc Original-Reviewed-on: https://chromium-review.googlesource.com/194526 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 2971d20b6ebdd9803b05ccbbaeefe1bde1a21af4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia5f2913fd8e4fee6e741e6d1e39d32bb86525cb3 Reviewed-on: http://review.coreboot.org/7831 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-16spi: Add support for Winbond W25Q32DWDavid Hendricks
Similar to the W25Q64DW, the W25Q32DW has basically the same attributes as the earlier W25Q32 parts but with a different value in the MSB of the ID. BUG=none BRANCH=none TEST=tested on nyan, now SPI flash commands actually work. Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I697768a443c98515d893f9cf8f8b4258ae0f159d Original-Reviewed-on: https://chromium-review.googlesource.com/191205 Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 35f03f4f4f21c470d172ce7cce257517b959346d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I73606737835e4f8ea00d2c331ca37957e4abd953 Reviewed-on: http://review.coreboot.org/7755 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16spi: Make idcode debug print more usefulDavid Hendricks
The old print simply said "Got idcode". This makes it actually display what it got. BUG=none BRANCH=none TEST=tested on nyan Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I8f1c8fde6e4ac00b12e74f925b7bcff83d1f69f3 Original-Reviewed-on: https://chromium-review.googlesource.com/191204 Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 5f13789be77d038d3c1602037afe29a0351f72ee) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I65d0d51c17b3bda62351532aac1756b630433ea3 Reviewed-on: http://review.coreboot.org/7754 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-16i2c: Replace the i2c API.Gabe Black
The new API is in use in depthcharge and is based around the "i2c_transfer" function instead of i2c_read and i2c_write. The new function takes an array of i2c_seg structures which represent each portion of the transfer after a start bit and before the stop bit. If there's more than one segment, they're seperated by repeated starts. Some wrapper functions have also been added which make certain common operations easy. These include reading or writing a byte from a register or reading or writing a blob of raw data. The i2c device drivers generally use these wrappers but can call the i2c_transfer function directly if the need something different. The tegra i2c driver was very similar to the one in depthcharge and was simple to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and replace the ones in coreboot. The Exynos 5420 driver was ported from the high speed portion of the one in coreboot and was straightforward to port back. The low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot and were replaced with the depthcharge implementation. BUG=None TEST=Built and booted on nyan with and without EFS. Built and booted on, pit and daisy. BRANCH=None Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193561 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe) This cherry-pick required additional changes to the following: src/cpu/allwinner/a10/twi.c src/drivers/xpowers/axp209/axp209.c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7 Reviewed-on: http://review.coreboot.org/7751 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-15elog: Probe for SPI flash on bus indicated by Kconfig variableDavid Hendricks
This replaces a hard-coded bus number of 0 with a Kconfig variable, CONFIG_BOOT_MEDIA_SPI_BUS. This removes an assumption made for x86 where this value is always 0 and makes it easy to add support for other platforms where the bus number for the backing SPI flash is more arbitrary. BUG=none BRANCH=none TEST=tested on Nyan (bus=4) and Link (bus=0) Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I1e878a1628af7f4ccc2f39a70b2190192767e536 Original-Reviewed-on: https://chromium-review.googlesource.com/194854 Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 371c6c14d8d4b98004eebce7049a88a219682bc4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie105b4654e028098f2137c96e4309b8d85f096df Reviewed-on: http://review.coreboot.org/7753 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15uart8250mem: Add wrapper for MMIO register accessKyösti Mälkki
For some UART hardware registers are 32 bits wide, so we will need base_port + reg << 2 instead. Prepare for that change and unification of MMIO between ARM and x86. Change-Id: I5fa2c2f7ee4872499a01754c1ba872a8addf499c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7793 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-09vboot: allow for non-memory-mapped VBOOT regionsAaron Durbin
Depending on the platform the underlying regions vboot requires may not be accessible through a memory-mapped interface. Allow for non-memory-mapped regions by providing a region request abstraction. There is then only a few touch points in the code to provide compile-time decision making no how to obtain a region. For the vblocks a temporary area is allocated from cbmem. They are then read from the SPI into the temporarily buffer. BUG=chrome-os-partner:27094 BRANCH=None TEST=Built and booted a rambi with vboot verification. Original-Change-Id: I828a7c36387a8eb573c5a0dd020fe9abad03d902 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/190924 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit aee0280bbfe110eae88aa297b433c1038c6fe8a3) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia020d1eebad753da950342656cd11b84e9a85376 Reviewed-on: http://review.coreboot.org/7709 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-09spi/macronix: Add support for MX25L3239EDave Frodin
Also update comment for the MX25L3236D part. Change-Id: Ifaeeb71e7672a8db55bbb66e6ce7316e2893478d Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/7631 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-08drivers/intel/fsp/fsp_util.c: Remove attribute,optimize("O0")Edward O'Callaghan
This is not actually required. Tested on 'minnow max' hardware as well as compared the asm of the optimized and non-optimized. Thanks Martin! Change-Id: I06e71876c3a3a15101013623797c2ebbf449756d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Found-by: Clang Reviewed-on: http://review.coreboot.org/7694 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-05FSP platform microcode: Update to remove Kconfig variableMartin Roth
Move the Kconfig variable into a .h file - this does not need to be in Kconfig. Change-Id: I1db20790ddb32e0eb082503c6c60cbbefa818bb9 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7646 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-05drivers/intel/fsp: add upd macros and #definesMartin Roth
Add macros and #defines for working with the UPD data. This makes the code look much cleaner. Remove the UPD_ENABLE / UPD_DISABLE from fsp_rangeley/chip.h and include the fsp_values header instead. This fixes a conflict. Change-Id: I72c9556065e5c7461432a4593b75da2c8a220a12 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7487 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-12-03SPI: Add vendor AtmelKyösti Mälkki
Change-Id: I60e578003b857f5dcabb2e9bc75aa46acddb62b8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7433 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-12-03SPI: Add Macronix part MX25U12835FKyösti Mälkki
Change-Id: I82482419afdf536a19b99c79131fa5844aaaec07 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7432 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-11-28drivers/i2c/at24rf08c/lenovo_serials.c: Use NULL over '0'Edward O'Callaghan
Change-Id: I7d8922d1812814ea2ebd72aaf5b5e28dc592bfb3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7590 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-28drivers/i2c/at24rf08c/lenovo_serials.c: Upper-case'ifyEdward O'Callaghan
Thereby making consistent with other i2c drivers Change-Id: I5ddc9d98fbbc1db68a933e3b9a6b92f309b72c41 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7589 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-11-23usbdebug: Some fix for dongle compatibilityKyösti Mälkki
Not sure what this is about. Required for BeagleBone (not Black) with HUB in the middle, also old FX2 senses extra reset if we do this. Change-Id: I86878f8f570911ed1ed3ec844c232ac91e934072 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3868 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-23usbdebug: Reduce bus reset delaysKyösti Mälkki
According to EHCI specification, host controller software stops the USB Reset condition by writing PORT_RESET=0. Software then poll-waits this bit until controller hardware has completed USB Reset sequence and read returns with PORT_RESET==0. Change-Id: I6033c4d904c2af9eb16f5f3c1eb825776648cc1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3863 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2014-11-23usbdebug: Refactor descriptor probing of dongleKyösti Mälkki
Organized such that it is easy to support devices that do not export special Debug Descriptor. Some of these can still work in a fixed configuration and/or require additional initialisation for UART clocks etc. Change-Id: Id07fd6b69007332d67d9e9a456f58fdbca1999cd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7209 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2014-11-23usbdebug: Move initialisation of the optional hubKyösti Mälkki
Add new file for device-specific initialisation transactions. Change-Id: I339df400a41675f178c7af613f03b2b44c826189 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7208 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2014-11-23usbdebug: Refactor on EHCI memory spaceKyösti Mälkki
We only reference with ehci_caps and ehci_regs during initialisation, no need to carry those around. When EHCI BAR is relocated during PCI allocation, record the changed address even if usbdebug is not enabled. Use the DBGP_EP_VALID flags to determine if endpoints have been configured or not. Change-Id: Idfd52edf7c2fc25b1b225985462ac488264e4c6d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7207 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2014-11-23usbdebug: Fix migration to ramstageKyösti Mälkki
On entry to ramstage CBMEM is looked for a copy of an already initialized EHCI debug dongle state. If a copy is found, it contained the state before CAR migration and the USB protocol data toggle can be out of sync. It's an even/odd kind of a parity check, so roughly every other build would show the problem as invalid first line: 'ug found in CBMEM.' After CAR migration, re-direct the state changes to correct CBMEM table. Change-Id: I7c54e76ce29af5c8ee5e9ce6fd3dc6bdf700dcf1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7206 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-22drivers/net/ne2k.c: Fix regressionEdward O'Callaghan
Provide dummy ramstage symbol to keep the linker happy. Borked in commit fd95624 Change-Id: I2c49e82fec8eb936390cc3b30698f1bf73968c99 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7548 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-11-20Replace includes of build.h with version.hKyösti Mälkki
As build.h is an auto-generated file it was necessary to add it as an explicit prerequisite in the Makefiles. When this was forgotten abuild would sometimes fail with following error: fatal error: build.h: No such file or directory Fix this error by compiling version.c into all stages. Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7510 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-19acpigen: Use implicit length patching in acpigen_write_resourcetemplate_footerVladimir Serbinenko
Change-Id: Ic177720b074fed13a17454dcb6765ac298365624 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7366 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-19acpigen: Add and use acpigen_write_device.Vladimir Serbinenko
The sequence of bytes to create a method is used several times in codebase. Put it into a function with logical arguments rather than duplicating magic bytes everywhere. Change-Id: I2c33fa403832eb1cfadfbf8d9adef5b63fb9cb24 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7348 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-19acpigen: Add and use acpigen_write_method.Vladimir Serbinenko
The sequence of bytes to create a method is used several times in codebase. Put it into a function with logical arguments rather than duplicating magic bytes everywhere. Change-Id: I0e55d8dc7d5e8e92a521c7a83117c470d0614008 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7347 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-11drivers/intel/gma/intel_dp.c: Fix printf type-specifierEdward O'Callaghan
'%02hx' is unsigned short, where as the argument is typed as uint8_t and so '%02hhx' is actually correct here. Found-by: Clang Change-Id: I40c48dcecf12845f4708e511236184908e90fb56 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7428 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2014-11-09lenovo/wacom: Move to implicit length patchingVladimir Serbinenko
Change-Id: Ica8a54ab215d09a2d2de93f316e3831ae4bfe5f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7331 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-07drivers/ioapic: DEVICE_NOOP some stub function callbacksEdward O'Callaghan
Just when you thought you found them all.. Reduces loc and makes NOP's explicit. Change-Id: I416e0468b7f2f462c940daae695d67fb409aa4c6 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7350 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-11-07drivers/net/ne2k.c: Collect headers and defines to top of fileEdward O'Callaghan
Change-Id: I2ffb0dd9fe400132f6d430f115f962b5f8578efa Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7292 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-11-02intel_wifi: Export the SMBIOS structure required by intel driver.Vladimir Serbinenko
Change-Id: I22984a1bc7ca3be6593143af4fce8d5bfe469837 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7295 Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-01drivers: Use DEVICE_NOOP macro over dummy symbolEdward O'Callaghan
Change-Id: I931bd9c89bce6ac8f8e9e482a7876e2004abfb38 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7284 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2014-10-27{arch,cpu,drivers,ec}: Don't hide pointers behind typedefsEdward O'Callaghan
Change-Id: Id88bb4367d6045f6fbf185f0562ac72c04ee5f84 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/7146 Tested-by: build bot (Jenkins)
2014-10-27drivers/spi: add Macronix MX25U6435F and MX25L6495F supportIdwer Vollering
Contributed by MXIC: http://www.coreboot.org/pipermail/coreboot/2014-October/078835.html Change-Id: I07f872a5cbb2b0ea63794edb8fbca40d7856ce10 Author: Alex Lu <alexlu6@mxic.com.tw> Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/7194 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-10-27lenovo/x2[23]0: Handle Ricoh SD cardreaderVladimir Serbinenko
Change-Id: Id0aecbd3e45bdf9661168ebd0e55f17dc6febaaa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7203 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-10-22cmos: Rename the CMOS related functions.Gabe Black
Most of the code related to the mc146818 is not related to the RTC and is really for managing the CMOS storage. Since we intend to add a generic API for RTC drivers it's inconvenient for those functions to have an rtc_ prefix. This CL renames those functions so they start with cmos_ instead. There are some places where rtc_init was called with a comment that says something about starting the RTC. That wasn't correct before (the RTC is always running), but it looks a little odd now that the function is called cmos_init. This CL also opportunistically cleans up some style problems in this file. Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/197794 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 9a9ad24888b185fb58965457704e326bb508d788) Removed the addition of stdint.h to mc146818rtc.h since types.h is now included. Changed rtc_init to cmos_init for fsp_bd82x6x, fsp_rangeley, fsp_baytrail, ibexpeak, vortex86ex. Change-Id: Id4b9f6bea93e8bd5eaef2cb17f296adb9697114c Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6977 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-22tpm: i2c: When probing the TPM, write a 0 into the TPM access register.Gabe Black
Not doing so makes it fail when run at high frequency. Change-Id: I1cfb69c55f03cb90f66f437289803d897a1aad5c Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/191812 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: Tom Warren <twarren@nvidia.com> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 04452441d2bfe2cacd3e0b6990c0e9261b5350d1) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/7007 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-10-19x86 romstage: Move stack just below RAMTOPKyösti Mälkki
Placement of romstage stack in RAM was vulnerable for getting corrupted by decompressed ramstage. Change-Id: Ic032bd3e69f4ab8dab8e5932df39fab70aa3e769 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7096 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-17drivers/spi: Add support for Micron N25Q128Scott Radcliffe
Support added for Micron N25Q128 SPI flash, which has the same manufacturer id as ST Micro. Jedec ID = 0x20 0xBB 0x18. Since existing stmicro.c only compares the last device id byte, this flash is mistakenly identified as M25P128, which has ID = 0x20 0x20 0x18. To handle this situation and avoid breaking code for existing devices, a two byte .id member is added. New devices should be added to the beginning of the flash table array with .idcode = STM_ID_USE_ALT_ID and .id = the two byte jedec device id. A 4KB subsector erase capability is added and used for this new device. It requires using a different SPI op-code supported by adding .op_erase member. Previous devices defined in stmicro.c are assigned their original op-code for 64KB sector erase. N25Q128 is now working on a custom designed Bayley Bay based board. Tested by verifying the MRC fastboot cache is successfully (re)written. Note that previous devices were not retested. Change-Id: Ic63d86958bf8d301898a157b435f549a0dd9893c Signed-off-by: Scott Radcliffe <sradcliffe@microind.com> Reviewed-on: http://review.coreboot.org/7077 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-10-16uarts: 32/64 cleanupRonald G. Minnich
We had lots of casts that caused warnings when compiling on RISCV. Clean them up. Change-Id: I46fcb33147ad6bf75e49ebfdfa05990e8c7ae4eb Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/7066 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-09-29intel/fsp_baytrail: Add S3 suspend/resume SupportMohan D'Costa
This adds S3 Suspend / Resume support to Intel's Bay Trail FSP It is based on the "src/soc/intel/baytrail/romstage/romstage.c" implementation. Change-Id: If0011068eb7290d1b764c5c4b12c17375fb69008 Signed-off-by: Mohan D'Costa <mohan@ndr.co.jp> Reviewed-on: http://review.coreboot.org/6937 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins)
2014-09-29spi: Add support for Winbond W25Q128FWMohan D'Costa
The W25Q128FW spi part is programatically equivalent to the other W25Q128 parts except it operates at 1.8V. Just add a new entry with the appropriate ID. Tested on a modified MinnowMax Board. Change-Id: Id6a426418a7f785a9d959b02a9e3d2ffc421804f Signed-off-by: Mohan D'Costa <mohan@ndr.co.jp> Reviewed-on: http://review.coreboot.org/6971 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins)
2014-09-17spi: add Kconfig variable for dual-output read enableDavid Hendricks
Add a Kconfig variable so that driver code knows whether or not to use dual-output reads. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I31d23bfedd91521d719378ec573e33b381ebd2c5 Reviewed-on: https://chromium-review.googlesource.com/177834 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit de6869a3350041c6823427787971efc9fcf469b8) tegra124: implement x2 mode for SPI transfers on CBFS media This implements x2 mode when reading CBFS media over SPI. In theory this effectively doubles our throughput, though the initial results were almost negligibly better. Using a logic analyzer we see a pattern of 12 clocks, ~70ns delay, 4 clocks, ~310ns delay. So if we want to see further gains here then we'll probably need to tune AHB arbitration and utilization to eliminate bubbles/stalls when copying from APB DMA. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I33d6ae30923fc42b4dc7103d029085985472cf3e Reviewed-on: https://chromium-review.googlesource.com/177835 Reviewed-by: Tom Warren <twarren@nvidia.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 29289223362b12e84da5cbb130f285c6b9d314cc) nyan: turn on dual-output reads for SPI flash Nyan's SPI chip is capable of dual-output reads, so let's use it. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I51a97c05aa25442d8ddcc4e3e35a2507d91a64df Reviewed-on: https://chromium-review.googlesource.com/177836 Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 62de0889a9cfc5686800645d05e21e272e4beb5c) Squashed three commits to enable dual output spi reads for nyan. Also fixed the spi_xfer interface that has been updated to use bytes instead of bits. Change-Id: I750a177576175b297f61e1b10eac6db15e75aa6e Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6909 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-09-13intel/gma: consolidate vbt codeVladimir Serbinenko
Change-Id: I80b7facfb9cc9f642dd1c766884dc23da1aab2c8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6800 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-01 15:17:14 +0000