Age | Commit message (Collapse) | Author |
|
Not sure what this is about.
Required for BeagleBone (not Black) with HUB in the middle, also
old FX2 senses extra reset if we do this.
Change-Id: I86878f8f570911ed1ed3ec844c232ac91e934072
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3868
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
According to EHCI specification, host controller software stops
the USB Reset condition by writing PORT_RESET=0. Software then
poll-waits this bit until controller hardware has completed USB
Reset sequence and read returns with PORT_RESET==0.
Change-Id: I6033c4d904c2af9eb16f5f3c1eb825776648cc1d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3863
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Organized such that it is easy to support devices that do not
export special Debug Descriptor. Some of these can still work
in a fixed configuration and/or require additional initialisation
for UART clocks etc.
Change-Id: Id07fd6b69007332d67d9e9a456f58fdbca1999cd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7209
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
Add new file for device-specific initialisation transactions.
Change-Id: I339df400a41675f178c7af613f03b2b44c826189
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7208
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
We only reference with ehci_caps and ehci_regs during initialisation,
no need to carry those around.
When EHCI BAR is relocated during PCI allocation, record the changed
address even if usbdebug is not enabled. Use the DBGP_EP_VALID flags
to determine if endpoints have been configured or not.
Change-Id: Idfd52edf7c2fc25b1b225985462ac488264e4c6d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7207
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
|
|
On entry to ramstage CBMEM is looked for a copy of an already initialized
EHCI debug dongle state. If a copy is found, it contained the state before
CAR migration and the USB protocol data toggle can be out of sync. It's an
even/odd kind of a parity check, so roughly every other build would
show the problem as invalid first line: 'ug found in CBMEM.'
After CAR migration, re-direct the state changes to correct CBMEM table.
Change-Id: I7c54e76ce29af5c8ee5e9ce6fd3dc6bdf700dcf1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7206
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Provide dummy ramstage symbol to keep the linker happy. Borked
in commit fd95624
Change-Id: I2c49e82fec8eb936390cc3b30698f1bf73968c99
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7548
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
As build.h is an auto-generated file it was necessary to add it as
an explicit prerequisite in the Makefiles. When this was forgotten
abuild would sometimes fail with following error:
fatal error: build.h: No such file or directory
Fix this error by compiling version.c into all stages.
Change-Id: I342f341077cc7496aed279b00baaa957aa2af0db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7510
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ic177720b074fed13a17454dcb6765ac298365624
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7366
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The sequence of bytes to create a method is used several times in codebase.
Put it into a function with logical arguments rather than duplicating magic
bytes everywhere.
Change-Id: I2c33fa403832eb1cfadfbf8d9adef5b63fb9cb24
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7348
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
The sequence of bytes to create a method is used several times in codebase.
Put it into a function with logical arguments rather than duplicating magic
bytes everywhere.
Change-Id: I0e55d8dc7d5e8e92a521c7a83117c470d0614008
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7347
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
'%02hx' is unsigned short, where as the argument is typed as
uint8_t and so '%02hhx' is actually correct here.
Found-by: Clang
Change-Id: I40c48dcecf12845f4708e511236184908e90fb56
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7428
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ica8a54ab215d09a2d2de93f316e3831ae4bfe5f5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7331
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Just when you thought you found them all..
Reduces loc and makes NOP's explicit.
Change-Id: I416e0468b7f2f462c940daae695d67fb409aa4c6
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7350
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: I2ffb0dd9fe400132f6d430f115f962b5f8578efa
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7292
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I22984a1bc7ca3be6593143af4fce8d5bfe469837
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7295
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I931bd9c89bce6ac8f8e9e482a7876e2004abfb38
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7284
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Change-Id: Id88bb4367d6045f6fbf185f0562ac72c04ee5f84
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/7146
Tested-by: build bot (Jenkins)
|
|
Contributed by MXIC: http://www.coreboot.org/pipermail/coreboot/2014-October/078835.html
Change-Id: I07f872a5cbb2b0ea63794edb8fbca40d7856ce10
Author: Alex Lu <alexlu6@mxic.com.tw>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/7194
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Id0aecbd3e45bdf9661168ebd0e55f17dc6febaaa
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7203
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Most of the code related to the mc146818 is not related to the RTC and is
really for managing the CMOS storage. Since we intend to add a generic API
for RTC drivers it's inconvenient for those functions to have an rtc_ prefix.
This CL renames those functions so they start with cmos_ instead. There are
some places where rtc_init was called with a comment that says something about
starting the RTC. That wasn't correct before (the RTC is always running), but
it looks a little odd now that the function is called cmos_init.
This CL also opportunistically cleans up some style problems in this file.
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/197794
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 9a9ad24888b185fb58965457704e326bb508d788)
Removed the addition of stdint.h to mc146818rtc.h since
types.h is now included. Changed rtc_init to cmos_init for
fsp_bd82x6x, fsp_rangeley, fsp_baytrail, ibexpeak, vortex86ex.
Change-Id: Id4b9f6bea93e8bd5eaef2cb17f296adb9697114c
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6977
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Not doing so makes it fail when run at high frequency.
Change-Id: I1cfb69c55f03cb90f66f437289803d897a1aad5c
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/191812
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: Tom Warren <twarren@nvidia.com>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 04452441d2bfe2cacd3e0b6990c0e9261b5350d1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7007
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Placement of romstage stack in RAM was vulnerable for getting corrupted
by decompressed ramstage.
Change-Id: Ic032bd3e69f4ab8dab8e5932df39fab70aa3e769
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7096
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Support added for Micron N25Q128 SPI flash, which has
the same manufacturer id as ST Micro. Jedec ID =
0x20 0xBB 0x18. Since existing stmicro.c only compares
the last device id byte, this flash is mistakenly
identified as M25P128, which has ID = 0x20 0x20 0x18.
To handle this situation and avoid breaking code for
existing devices, a two byte .id member is added.
New devices should be added to the beginning of the
flash table array with .idcode = STM_ID_USE_ALT_ID and
.id = the two byte jedec device id.
A 4KB subsector erase capability is added and used for
this new device. It requires using a different SPI
op-code supported by adding .op_erase member. Previous
devices defined in stmicro.c are assigned their original
op-code for 64KB sector erase.
N25Q128 is now working on a custom designed Bayley Bay
based board. Tested by verifying the MRC fastboot cache
is successfully (re)written. Note that previous devices
were not retested.
Change-Id: Ic63d86958bf8d301898a157b435f549a0dd9893c
Signed-off-by: Scott Radcliffe <sradcliffe@microind.com>
Reviewed-on: http://review.coreboot.org/7077
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
We had lots of casts that caused warnings when compiling on RISCV.
Clean them up.
Change-Id: I46fcb33147ad6bf75e49ebfdfa05990e8c7ae4eb
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: http://review.coreboot.org/7066
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds S3 Suspend / Resume support to Intel's Bay Trail FSP
It is based on the "src/soc/intel/baytrail/romstage/romstage.c"
implementation.
Change-Id: If0011068eb7290d1b764c5c4b12c17375fb69008
Signed-off-by: Mohan D'Costa <mohan@ndr.co.jp>
Reviewed-on: http://review.coreboot.org/6937
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The W25Q128FW spi part is programatically equivalent
to the other W25Q128 parts except it operates at 1.8V.
Just add a new entry with the appropriate ID.
Tested on a modified MinnowMax Board.
Change-Id: Id6a426418a7f785a9d959b02a9e3d2ffc421804f
Signed-off-by: Mohan D'Costa <mohan@ndr.co.jp>
Reviewed-on: http://review.coreboot.org/6971
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Add a Kconfig variable so that driver code knows whether
or not to use dual-output reads.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I31d23bfedd91521d719378ec573e33b381ebd2c5
Reviewed-on: https://chromium-review.googlesource.com/177834
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit de6869a3350041c6823427787971efc9fcf469b8)
tegra124: implement x2 mode for SPI transfers on CBFS media
This implements x2 mode when reading CBFS media over SPI.
In theory this effectively doubles our throughput, though the initial
results were almost negligibly better. Using a logic analyzer we see
a pattern of 12 clocks, ~70ns delay, 4 clocks, ~310ns delay. So if we
want to see further gains here then we'll probably need to tune AHB
arbitration and utilization to eliminate bubbles/stalls when copying
from APB DMA.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I33d6ae30923fc42b4dc7103d029085985472cf3e
Reviewed-on: https://chromium-review.googlesource.com/177835
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 29289223362b12e84da5cbb130f285c6b9d314cc)
nyan: turn on dual-output reads for SPI flash
Nyan's SPI chip is capable of dual-output reads, so let's use it.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I51a97c05aa25442d8ddcc4e3e35a2507d91a64df
Reviewed-on: https://chromium-review.googlesource.com/177836
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 62de0889a9cfc5686800645d05e21e272e4beb5c)
Squashed three commits to enable dual output spi reads for nyan.
Also fixed the spi_xfer interface that has been updated to use bytes
instead of bits.
Change-Id: I750a177576175b297f61e1b10eac6db15e75aa6e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6909
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I80b7facfb9cc9f642dd1c766884dc23da1aab2c8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6800
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I3d664ab575bf9c49a7bff9a395fbab96748430d0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6802
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
Drop a lot of u-boot-isms and share common TIS API
between I2C driver and LPC driver.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: I43be8eea0acbdaef58ef256a2bc5336b83368a0e
Reviewed-on: https://chromium-review.googlesource.com/175670
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 3fc8515b9dcef66998658e1aa5c020d22509810c)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6855
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As a first step towards removing hardcodes from the FUI support,
change the haswell call to i915_lightup to panel_lightup, and pass the
intel_dp * as a parameter. Get rid of the scalar arguments and make
them part of intel_dp. Get rid of file-scope variables and use the
ones in the intel_dp struct. In falco, use functions that peppy
uses. Drop slippy support for FUI, it's a dead board; if this is ok
I'll remove the files next.
And, incidentally, fix the broken RGBX constant and change it to BGRX.
Change-Id: I46ef5a9ed8433382d042066ee3542af04cfc319a
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/174932
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 1e1ed410b445c8e2b7411e163d9d6f61499dc3f6)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6833
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
|
|
Change-Id: I9366dded98bf15f6da44ce893dd10698ba09fd55
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6820
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
We had brought this code in from the kernel but found it best to
use mainboard- or chipset specific versions. Firmware should
strive to be as non-generic as possible.
Change-Id: Ic1ca746cc52c3f9ea4de6895f2b32946229beada
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172625
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 7dba0dfd25bf9e367f9e5128b15edb018e958c3a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6779
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Tablets have different mainboard version than laptop variants.
Change-Id: I77a1e2b50d30dcf3fa064e0c378ceca7ccf96e89
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6785
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
commit 9518b56 (intel/gma: Clarify code and use dedicated init for
Google Peppy) changed "struct edid" and thereby broke the build.
Adapt drivers/emulation/qemu/bochs.c to the changes to fix this.
Build failure triggers with CONFIG_FRAMEBUFFER_KEEP_VESA_MODE=y.
Change-Id: I2d3cecde21d495e9b99ff8d2f741f8a462c75a4d
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/6771
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
commit 9518b56 (intel/gma: Clarify code and use dedicated init for
Google Peppy) changed "struct edid" and thereby broke the build.
Adapt drivers/emulation/qemu/bochs.c to the changes to fix this.
Build failure triggers with CONFIG_FRAMEBUFFER_KEEP_VESA_MODE=y.
Change-Id: Ic295c6d31284555e1463af5bca673231b8722d54
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/6769
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
driver
Move (and rename to make it clearer) the function that computes display
parameters from the dpcd and edid.
Change-Id: Idfbb56fd312b23c742c52abca1a34ae117a8fece
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171366
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 8f2b3bafee7cb05db8fae1c52fc9e1ee64e5e35d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6768
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Peppy had some issues with FUI. We decided it was time to create
peppy-specific gma.c and i915io.c files. Using yabel and the i915tool,
we generated a replay attack, then interpolated against the slippy
i915io.c to get something working.
Also, in preparation for moving code out of the mainboard gma.c to
generic driver code, we got rid of some hardcodes in the mainboard
gma.c that have no business being there. The worst were the
computation of gmch_[m,n] and it turns out that we had some
long-standing bugs related to confusion about 'bpp'. I've killed the
word bpp everywhere I could because there are at least 3 things that
correspond to bpp. We now have framebuffer, pipe, and panel bpp. The
names are long because I want to avoid all the mistakes we've all been
making in the last year :-) Sadly, that means a lot of changes not just
peppy-related, but they are simple and in a good cause.
The test pattern generation is driven by a global variable in
mainboard/peppy/gma.c. I've found in the past that it's very useful
to have a function like this available, as one can activate it while
using a jtag debugger: halt at the right place in ramstage, set the
variable to 1, continue. It's not enough code to worry about always
including.
The last hard-codes for M and N registers are gone, and the function
to set from generic intel_dp.c code works. To avoid screen trash on a
dev mode boot, which we liked but nobody else did :-), we now take the
time to put a pleasing background color that sort of doubles as a
power LED.
Rough timing is ramstage start is at 2.2, and dev setup is done at
3.3. These new platforms are depressingly slow to boot. Rom init alone
is taking 1.9 seconds. 13 years ago it was 3 seconds from power on to bash
prompt. These CPUs are at least 10x faster and take much longer to get going.
Future work, once we get this through, is to move more functions to the
intel driver, and combine the mainboard i915io.c into the mainboard gma.c.
That separation only existed because i915io.c was generated by a tool, and it
had lots of ugliness. Most ugliness is gone.
Old-Change-Id: I6a6295b423a41e263f82cef33eacb92a14163321
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/170013
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
(cherry picked from commit 8cdaf73e3602e15925859866714db4d5ec6c947d)
snow: Fix a typo in devicetree.cb that was breaking the snow build.
A typo in a recent change broke the snow build.
Old-Change-Id: I93074e68eb3d21510d974fd8e9c63b3947285afd
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171014
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 154876c126a6690930141df178485658533096d2)
Squashed a fix into the initial patch and updated nehalem/gma.c
to have a non-static gtt_poll.
Change-Id: I2f4342c610d87335411da1d6d405171dc80c1f14
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6657
Tested-by: build bot (Jenkins)
|
|
The register indexes and bitfield masks were guarded by the UART8250 config
options, but it might be (is) necessary to use them in a driver that is
UART8250 like without actually using the 8250 driver itself. To avoid any name
collision with other drivers, also change the constant prefix from UART_ to
UART8250_.
Change-Id: Ie606d9e0329132961c3004688176204a829569dc
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171336
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit a93900be8d8a8260db49e30737608f9161fbf249)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6715
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
mainboard/google/slippy/i915io.c
A large portion of documented registers have been initialized using macros. Only a few
undocumented registers are left out. i915io.c looks lot more cleaner by removing redundant
calls. However, some more work is required to correctly identify which calls are not required.
All the io_writes are replaced by gtt_writes.
Change-Id: I077a235652c7d5eb90346cd6e15cc48b5161e969
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66204
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 39f3289f68b527575b0a120960ff67f78415815e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6600
Tested-by: build bot (Jenkins)
|
|
On ARM platforms the TPM is not attached through LPC but through I2C.
This patch adds an I2C TPM driver that supports the following chips:
* Infineon SLB9635
* Infineon SLB9645
In order to select the correct TPM implementation cleanly, CONFIG_TPM
is moved to src/Kconfig and does the correct choice.
Old-Change-Id: I2def0e0f86a869d6fcf56fc4ccab0bc935de2bf1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/167543
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit b4049a0e96f6335a93877e1e884f9a440487c421)
i2c tpm: Remove mostly useless delay code/tables.
I assume from the code in the TPM driver that the TPM spec defines
different types of delays and timeouts which each have a particular
duration, and that the TPM can tell you how long each type is if you ask
it. There was a large table, some members of a data structure, and a
function or two which managed the timeouts and figured their value for
different operations. The timeout values for the various "ordinals"
were never set in the vendor specific data structure, however, and
always defaulted to 2 minutes. Similarly the timeouts a, b, c, and d
were never overridden from their defaults. This change gets rid of all
the timeout management code and makes the "ordinal" timeout 2 minutes
and the a, b, c, and d timeouts 2 seconds, the larger of the two default
values.
This is a port from depthcharge to coreboot, original change:
https://chromium-review.googlesource.com/#/c/168363/
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Old-Change-Id: I79696d6329184ca07f6a1be4f6ca85e1655a7aaf
Reviewed-on: https://chromium-review.googlesource.com/168583
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit b22395a73f361c38626911808332a3706b2334fe)
TPM: Stop requesting/releasing the TPM locality.
The locality is requested when the TPM is initialized and released when
it's cleaned up. There's no reason to set it to the same thing again and
restore it back to the same value before and after every transaction.
forward ported from https://chromium-review.googlesource.com/#/c/168400
Old-Change-Id: I291d1f86f220ef0eff6809c6cb00459bf95aa5e0
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/168584
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit cc866c20c6f936f349d2f1773dd492dca9bbf0c1)
Squashed three commits for the i2c tpm driver.
Change-Id: Ie7a50c50fda8ee986c02de7fe27551666998229d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6519
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ide31a56bfdbc31cd3b87993dfb4ed8ef0107cdba
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5396
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: If357da5d84a255e0bdf8784d559ee0941045bbd6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/6309
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I5b0399a8edca3b73aa7d515d2c446c31b3239fa5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5239
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Continuing on from the rational given in:
a173a62 Remove guarding #includes by CONFIG_FOO combinations
Change-Id: I35c636ee7c0b106323b3e4b90629f7262750f8bd
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6114
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: I2d1f6a571166924c929452fd0f70192670904220
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6285
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
This is a bit of strange way to write 'unsigned long', fix that.
Change-Id: I17caf971dac840e0f35f883dacfbd5c94d8c03d6
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6196
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
SPI controllers in Intel and AMD bridges have a slightly different
restriction on how long transactions they can handle.
Change-Id: I3d149d4b7e7e9633482a153d5e380a86c553d871
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6163
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|