summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2016-11-21drivers/intel/fsp2_0: Check for NULL before using pointerMartin Roth
The cbmem routines pass back NULL on error. Check for this before using the pointer. Addresses coverity issue 1365731 - Dereference null return value Change-Id: I92995366ffb15afd0950b9a8bbb6fe16252b2c38 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17480 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-21fsp2_0: implement stage cache for silicon initBrandon Breitenstein
Stage cache will save ~20ms on S3 resume for apollolake platforms. Implementing the cache in ramstage to save silicon init and reload it on resume. This patch adds passing S3 status to silicon init in order to verify that the wake is from S3 and not for some other reason. This patch also includes changes needed for quark and skylake platforms that require fsp 2.0. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for reef and tested boot and S3 resume path saving 20ms Change-Id: I99dc93c1d7a7d5cf8d8de1aa253a326ec67f05f6 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/17460 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-21net/r8167: do net set bus msater enableRonald G. Minnich
It's very dangerous to set bus master enable, and more so on a NIC, where random broadcast packets can end up in memory in unexpected ways. If your kernel has trouble with the fact that we do not set bus master enable, you need to fix your kernel. Change-Id: If07fde7961ad80125567240cb43db036346bef97 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17559 Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Tested-by: build bot (Jenkins)
2016-11-21drivers/usb: Add option for baudrate of FT232H UARTNico Huber
The maximum supported rate is 12MHz. Only tested with 4MHz though, since I couldn't set anything higher on my Linux receiver. But that works fine with another FT*232H as receiver, whoosh. Change-Id: Ie39aa0170882ff5b4512f0349f6f86d3f0b86421 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17477 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-18intel post-car: Increase stacktop alignmentKyösti Mälkki
Align top of stack to 8 bytes, value documented as FSP1.1 requirement. Also fix some cases of uintptr_t casted to unsigned long. Change-Id: I5bbd100eeb673417da205a2c2c3410fef1af61f0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17461 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17rtc: Force negative edge on SET after battery replacementMarshall Dawson
After the RTC coin cell has been replaced, the Update Cycle Inhibit bit must see at least one low transition to ensure the RTC counts. The reset value for this bit is undefined. Examples have been observed where batteries are installed on a manufacturing line, the bit's state comes up low, but the RTC does not count. Change-Id: I05f61efdf941297fa9ec90136124b0c8fe0639c6 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17370 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-17rtc: Check update-in-progress bitMarshall Dawson
While the real-time clock updates its count, values may not be correctly read or written. On reads, ensure the UIP bit is clear which guarantees a minimum of 244 microseconds exists before the update begins. Writes already avoid the problem by disabling the RTC count via the SET bit. Change-Id: I39e34493113015d32582f1c280fafa9e97f43a40 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17369 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-16drivers/i2c/alps: Add support for ALPS Touchpad driverBarnali Sarkar
Add support for I2C ALPS Touchpad Device Driver. BUG=none BRANCH=none TEST=Build and booted successfully on KBL RVP and Touchpad is working Change-Id: I78b77bd7c4694ccf61260724f593bd59545c70e6 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17390 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-11-14drivers/pc80/tpm: Select TPM device name based on Kconfig optionSubrata Banik
Device ID remains same for SLB9670 Infineon TPM 1.1 and TPM 2.0 chip. Hence select based on TPM2 Kconfig option. BUG=none BRANCH=none TEST=Build and boot SKL RVP with SPI TPM 2.0 module Change-Id: I57e63f2f2899d25ed6b797930fd8bf1d1cdc1b1d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17374 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-12drivers/intel/fsp2_0: track end of firmware notificationsAaron Durbin
The end of firmware notification is currently not being tracked so it's hard to get good data on how long it takes. Update the code to provide timestamp data as well as post codes. BUG=chrome-os-partner:56656 Change-Id: I74c1043f2e72d9d85b23a99b8253ac465f62a7f2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17373 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
2016-11-11lib/tlcl: Ensure tlcl library is initialized only onceFurquan Shaikh
Since tlcl library is used other than just vboot driver, ensure that the library is initialized only once per stage. BUG=chrome-os-partner:59355 BRANCH=None TEST=Verified in recovery mode on reef, tlcl library is initialized only once in romstage. Change-Id: I6245fe9ed34f5c174341b7eea8db456b45113287 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17364 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10drivers/i2c/wacom: Make the driver more genericFurquan Shaikh
Wacom I2C driver can be used by devices other than touchscreen. e.g. digitizer. So there is no need to name the driver with touchscreen specific attributes. Only a separate descriptor name is required that needs to be set by mainboard correctly. BUG=chrome-os-partner:56246 BRANCH=None TEST=Compiles successfully. Change-Id: I0d32a4adae477373b3f4c5f3abbe188860701194 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17341 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-10drivers/intel/fsp2_0: Add support for recovery MRC hash space in TPMFurquan Shaikh
This space is read/updated only in recovery mode. 1. During read phase, verify if the hash of MRC data read from RECOVERY_MRC_CACHE matches the hash stored in TPM. 2. During update phase, calculate hash of training data returned by MRC and save it in TPM. BUG=chrome-os-partner:59355 BRANCH=None TEST=Verified MRC data hash comparison and update operation on reef. Change-Id: Ifcbbf1bd22033767625ec55b659e05fa7a7afc16 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17274 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-10mrc: Add support for separate training cache in recovery modeFurquan Shaikh
1. Re-factor MRC cache driver to properly select RW_MRC_CACHE or RECOVERY_MRC_CACHE based on the boot mode. - If normal mode boot, use RW_MRC_CACHE, if available. - If recovery mode boot: - Retrain memory if RECOVERY_MRC_CACHE not present, or recovery is requested explicity with retrain memory request. - Use RECOVERY_MRC_CACHE otherwise. 2. Protect RW and RECOVERY mrc caches in recovery and non-recovery boot modes. Check if both are present under one unified region and protect that region as a whole. Else try protecting individual regions. 3. Update training data in appropriate cache: - Use RW_MRC_CACHE if normal mode. - Use RECOVERY_MRC_CACHE if present in recovery mode. Else use RW_MRC_CACHE. 4. Add proper debug logs to indicate which training data cache is used at any point. BUG=chrome-os-partner:59352 BRANCH=None TEST=Verified that correct cache is used in both normal and recovery mode on reef. Change-Id: Ie79737a1450bd1ff71543e44a5a3e16950e70fb3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17242 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-09google/pyro: Update WACOM touchscreen ACPI _HIDJanice Li
WACOM request to add a new identifier `WCOMNTN2`, and use that for the board Pyro with all LCD combinations. BRANCH=master BUG=chrome-os-partner:58093 TEST=emerge-pyro vboot_reference coreboot chromeos-bootimage Signed-off-by: Janice Li <janice.li@quantatw.com> Change-Id: I95cf357efba958d7e864d2736d324e0aad70e307 Reviewed-on: https://review.coreboot.org/17257 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-11-07drivers/i2c/tpm/cr50: Increase IRQ timeoutDuncan Laurie
Increase the IRQ timeout to prevent issues if there is a delay in the TPM responding to a command. Split the no-IRQ case out so it doesn't suffer unnecessarily. BUG=chrome-os-partner:59191 TEST=suspend/resume testing on eve board Change-Id: I1ea7859bc7a056a450b2b0ee32153ae43ee8699f Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17204 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-31lib/prog_loaders: use common ramstage_cache_invalid()Aaron Durbin
All current implementations of ramstage_cache_invalid() were just resetting the system based on the RESET_ON_INVALID_RAMSTAGE_CACHE Kconfig option. Move that behavior to a single implementation within prog_loaders.c which removes duplication. Change-Id: I67aae73f9e1305732f90d947fe57c5aaf66ada9e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17184 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-27driver/intel/fsp2_0: Reset on invalid stage cache.Naresh G Solanki
Add config in fsp 2.0/1.1 driver to reset if ramstage stage cache is invalid during S3 resume. Change-Id: I83fe76957c061f20e9afb308e55923806fda4f93 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17112 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-26drivers/i2c/wacom_ts: Add support for WCOM touchscreen device driverFurquan Shaikh
BUG=chrome-os-partner:57846 Change-Id: Id6bd91b3fd6420994ad5811d362618b1a38a8afa Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17092 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-25drivers/i2c/generic: Re-factor SSDT generation codeFurquan Shaikh
1. Export i2c_generic_fill_ssdt to allow other device-specific i2c drivers to share and re-use the same code for generating AML code for SSDT. In order to achieve this, following changes are required: a. Add macro I2C_GENERIC_CONFIG that defines a structure with all generic i2c device-tree properties. This macro should be placed by the using driver at the start of its config structure. b. Accept a callback function to add any device specific information to SSDT. If generic driver is used directly by a device, callback would be NULL. Other devices using a separate i2c driver can provide a callback to add any properties to SSDT. 2. Allow device to provide _CID. BUG=chrome-os-partner:57846 Change-Id: I3a0054e22b81f9d6d407bef417eae5e9edc04ee4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17089 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-10-25drivers/i2c/generic: Enable support for adding PowerResource for deviceFurquan Shaikh
Add support to allow a device to define PowerResource in its SSDT AML code. PowerResouce ACPI generation expects SoC to define the callbacks for generating AML code for GPIO manipulation. Device requiring PowerResource needs to define following parameters: 1. Reset GPIO - Optional, GPIO to put device into reset or take it out of reset. 2. Reset delay - Delay after reset GPIO is de-asserted (default 0). 3. Enable GPIO - Optional, GPIO to enabled device. 4. Enable delay - Delay after enable GPIO is asserted (default 0). BUG=chrome-os-partner:55988 Change-Id: Ieb2dd95fc1f555f5de66f3dda425172ac5b75dad Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17081 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-10-24drivers/i2c/generic: Return correct name for acpi_nameFurquan Shaikh
Return config->name if it is not NULL. BUG=chrome-os-partner:55988 Change-Id: I9ae229949b73de6f991383daae8d962d6cf457a7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17077 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-09drivers/intel/wifi: Add depends on ARCH_X86Martin Roth
When compiling a non-x86 platform with DRIVERS_INTEL_WIFI enabled, we get the build error: src/drivers/intel/wifi/wifi.c:17:30: fatal error: arch/acpi_device.h: No such file or directory acpi_device.h only exists in the x86 architecture directory. Change-Id: Id0e29558336bf44e638cfcb97c22f31683ea4ec7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16906 Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-10-07soc/intel/apollolake: Implement stage cache to improve resume timeBrandon Breitenstein
This patch enables stage cache to save ~40ms during S3 resume. It saves ramstage in the stage cache and restores it on resume so that ramstage does not have to reinitialize during the resume flow. Stage cache functionality is added to postcar stage since ramstage is called from postcar. BUG=chrome-os-partner:56941 BRANCH=none TEST=built for Reef and tested ramstage being cached Change-Id: I1551fd0faca536bd8c8656f0a8ec7f900aae1f72 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16833 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-07src/drivers: Remove whitespace after memcpy & memsetElyes HAOUAS
Change-Id: If79eb706b6d44f7c34dfe31a1545f5850870b334 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16866 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-07x86/acpi_device: Add support for GPIO output polarityFurquan Shaikh
Instead of hard-coding the polarity of the GPIO to active high/low, accept it as a parameter in devicetree. This polarity can then be used while calling into acpi_dp_add_gpio to determine the active low status correctly. BUG=chrome-os-partner:55988 BRANCH=None TEST=Verified that correct polarity is set for reset-gpio on reef. Change-Id: I4aba4bb8bd61799962deaaa11307c0c5be112919 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/16877 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-10-07Gale: Fix the orange color to match the UX docSuresh Rajashekara
UX Doc = go/gale-hw-ui This color wasn't changed earlier as the change wasn't done in the OS also. However, since we cannot change this later in FW (but OS can change anytime), I am making this change after discussing with the UX team. BUG=b:31501528, b:31633562 TEST=Change the device state to 'recovery mode' to observe the new color. BRANCH=none Change-Id: Ia91f14eb77492095cb41a9de0bb9790e72aa4851 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 36a3d8c6eabbc0b23d0a15d5bddc5ed3bdeebe70 Original-Change-Id: I88768b94cf91804a6005e44b1a168e059698ec4b Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/388206 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Christopher Book <cbook@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16767 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06i2c/ww_ring: LED changes as per UX team feedback.Suresh Rajashekara
Colors and patterns as defined by the UX team BUG=b:31501528 TEST=Move the device to different states in FW using rec and dev button and verify the colors BRANCH=None Change-Id: I66d41a54590cd3ce4e5202c7cfa890f462fe195e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 703559d5dddaeeb7d435d6cadbb2009a1b7a76c8 Original-Change-Id: I95ab1fa59b483396ff1498a28f1ee98ac08d02d7 Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/387258 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Christopher Book <cbook@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16718 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06spi: Add a way to show SPI transfer speed for readsSimon Glass
SPI read speed directly impacts boot time and we do quite a lot of reading. Add a way to easily find out the speed of SPI flash reads within coreboot. Write speed is less important since there are very few writes and they are small. BUG=chrome-os-partner:56556 BRANCH=none TEST=run on gru with SPI_SPEED_DEBUG set to 1. See the output messages: read SPI 627d4 7d73: 18455 us, 1740 KB/s, 13.920 Mbps Change-Id: Id3814bd2b7bd045cdfcc67eb1fabc861bf9ed3b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 82cb93f6be47efce3b0a3843bab89d2381baef89 Original-Change-Id: Iec66f5b8e3ad62f14d836a538dc7801e4ca669e7 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376944 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Simon Glass <sjg@google.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16701 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-06i2c/ww_ring: Change LED configuration for Gale EVT3Suresh Rajashekara
Gale EVT3 has only one LED controller (earlier we had 2). Remove the support for the second controller and also the corresponding microcode. The color values used are the same as onHub (Arkham to be specific). BUG=b:30890905 TEST=Move the device to different states manually by appropriate actions (like dev mode, rec mode etc) and observe the different colors. BRANCH=None Change-Id: I853035610ea7ea7c8d29c30d2de13c9e2e786b2b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 593905d2d69daa7482318aa5f5c5cd7cf984043e Original-Change-Id: If8f22abd605faac6f6215ef600041740ce15ea0c Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/370821 Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org> Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/16697 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-05drivers/i2c/tpm/cr50: Initialize IRQ status handler before probeDuncan Laurie
Move the setup of the IRQ status handler so it will be set up properly before the early probe happens. BUG=chrome-os-partner:53336 Change-Id: I4380af1233d2a252899459635a3cb69ca196088d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16861 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-09-30Kconfig: Prefix hex defaults with 0xMartin Roth
Because these variables had "non-hexidecimal" defaults, they were updated by kconfig when writing defconfig files. Change-Id: Ic1a070d340708f989157ad18ddc79de7bb92d873 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16827 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30soc/intel/fsp_broadwell_de/uart: Drop itNico Huber
A copy of our uart8250io driver sneaked in with Broadwell-DE support. The only difference is the lack of initialization (due to FSP handling that). TEST=manually compared resulting object files Change-Id: I09be10b76c76c1306ad2c8db8fb07794dde1b0f2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16786 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-30drivers/intel/fsp2_0: Fix debug display supportLee Leahy
Fix errors in debug display support. BRANCH=none BUG=None TEST=Build FSP 2.0 (SEC/PEI core with all FSP debug on) and run on Galileo Gen2 Change-Id: I2ece056d66dc8568a7b7206970f20368ec5bf147 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/16809 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-28drivers/i2c/generic: Add config for marking device as probedDuncan Laurie
Add a config option to the generic I2C device driver to indicate to the OS that this device should be probed before being added. This can be used to provide ACPI device instantiations to devices that may not actually exist on the board. For example, if multiple trackpad vendors are supported on the same board they can both be described in ACPI and the OS will probe the address and load the driver only if the device responds to the probe at that address. BUG=chrome-os-partner:57686 Change-Id: I22cffb4b15f25d97dfd37dc58bca315f57bafc59 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16742 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-27intel/gma/vbt.c: pad the ID string with spaces.Arthur Heymans
The VBT id string is 20 characters long. If the string is shorter than 20 it needs spaces at the end. This change is cosmetic as all strings were padded by hand. Change-Id: Id6439f1d3dbd09319ee99ce9d15dbc3bcead1f53 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16739 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-21drivers/i2c/tpm/cr50: Support interrupts for statusDuncan Laurie
Support reading the ACPI GPE status (on x86) to determine when the cr50 is ready to return response data or is done processing written data. If the interrupt is not defined by Kconfig then it will continue to use the safe delay. This was tested with reef hardware and a modified cr50 image that generates interrupts at the intended points. BUG=chrome-os-partner:53336 Change-Id: Ic8f805159650c45382cacac8840450a1f8b4d7a1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16672 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Improve data handling and function namesDuncan Laurie
Unify the function names to be consistent throughout the driver and improve the handling while waiting for data available and data expected flags from the TPM. BUG=chrome-os-partner:53336 Change-Id: Ie2dfb7ede1bcda0e77070df945c47c1428115907 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16668 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Clean up locality functionsDuncan Laurie
Clean up the mask and timeout handling in the locality functions that were copied from the original driver. BUG=chrome-os-partner:53336 Change-Id: Ifdcb3be0036b2c02bfbd1bcd326e9519d3726ee0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16667 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Rename i2c read/write functionsDuncan Laurie
Rename the low-level functions from iic_tpm_read/write to cr50_i2c_read/write to better match the driver name, and pass in the tpm_chip structure to the low-level read/write functions as it will be needed in future changes. BUG=chrome-os-partner:53336 Change-Id: I826a7f024f8d137453af86ba920e0a3a734f7349 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16666 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Clean up timeoutsDuncan Laurie
Use two different timeouts in the driver. The 2ms timeout is needed to be safe for cr50 to cover the extended timeout that is seen with some commands. The other at 2 seconds which is a TPM spec timeout. BUG=chrome-os-partner:53336 Change-Id: Ia396fc48b8fe6e56e7071db9d74561de02b5b50e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16665 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm/cr50: Reduce max buffer sizeDuncan Laurie
Reduce the static buffer size from the generic default 1260 down to 64 to match the max FIFO size for the cr50 hardware and reduce the footprint of the driver. BUG=chrome-os-partner:53336 Change-Id: I6f9f71d501b60299edad4b16cc553a85391a1866 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16664 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm: Split cr50 driver from main driverDuncan Laurie
Originally I thought it would be cleaner to keep this code in one place, but as things continue to diverge it ends up being easier to split this into its own driver. This way the different drivers in coreboot, depthcharge, and the kernel, can all be standalone and if one is changed it is easier to modify the others. This change splits out the cr50 driver and brings along the basic elements from the existing driver with no real change in functionality. The following commits will modify the code to make it consistent so it can all be shared with depthcharge and the linux kernel drivers. BUG=chrome-os-partner:53336 Change-Id: I3b62b680773d23cc5a7d2217b9754c6c28bccfa7 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16663 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21drivers/i2c/tpm: Move common variables to headerDuncan Laurie
Move the common enums and variables to tpm.h so it can be used by multiple drivers. BUG=chrome-os-partner:53336 Change-Id: Ie749f13562be753293448fee2c2d643797bf8049 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16662 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21Makefiles: update cbfs types from bare numbers to valuesMartin Roth
These values are found in util/cbfstool/cbfs.h. Change-Id: Iea4807b272c0309ac3283e5a3f5e135da6c5eb66 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16646 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19Revert "drivers/i2c/tpm: Move common variables to header"Duncan Laurie
This reverts commit 64df72e8e2d1c086705325533767ca5e201e842a.
2016-09-19Revert "drivers/i2c/tpm: Split cr50 driver from main driver"Duncan Laurie
This reverts commit c565f9910707b91fcc7a27bab28806e558bb474d.
2016-09-19Revert "drivers/i2c/tpm/cr50: Reduce max buffer size"Duncan Laurie
This reverts commit 97a2a1ece152b6d40a524361721405b77c37959d.
2016-09-19Revert "drivers/i2c/tpm/cr50: Clean up timeouts"Duncan Laurie
This reverts commit 93c778688f0bf2f90334505a3082a2cd4ce1623a.
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-27 22:17:08 +0000