summaryrefslogtreecommitdiff
path: root/src/drivers
AgeCommit message (Collapse)Author
2019-01-28src: Don't use a #defines like Kconfig symbolsElyes HAOUAS
This is spotted using ./util/lint/kconfig_lint To work around the issue, rename the prefix from `CONFIG_` to `CONF_`. Change-Id: Ia31aed366bf768ab167ed5f8595bee8234aac46b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-27src: Fix the warning "type 'hex' are always defined"Elyes HAOUAS
This is spotted using "./util/lint/kconfig_lint" While at it, do the check in C and not the preprocessor. Change-Id: Icfda267936a23d9d14832116d67571f42f685906 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-24drivers/generic/gpio_keys: Add trigger for wakeup event actionKarthikeyan Ramasubramanian
Currently without any trigger the wakeup event is generated on both the rising and falling edges of the GPIO input. Add support to specify the trigger explicitly so that the configuration can be passed to the kernel. BRANCH=octopus BUG=b:117953118 TEST=Ensure that the system boots to ChromeOS. Ensure that the stylus tools open on pen eject. Ensure that the system wakes on Pen Eject. Ensure that the system enters S0ix and S3 states after the pen is ejected. Ensure that the system enters S0ix and S3 states when the pen remains inserted in its holder. Ensured that the system does not wake when the pen is inserted. Ensure that the suspend_stress_test runs successfully for 25 iterations with the pen placed in its holder and ejected from its holder. Change-Id: Ifb08ba01106031aa2655c1ae2faab284926f1ceb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Reviewed-on: https://review.coreboot.org/c/30451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-24cr50: Add probe command to poll Cr50 until DID VID is validKeith Short
Added new routine cr50_i2c_probe() which ensures that communication with the Cr50 over I2C is good prior to attempting other initialization of the Cr50 and TPM state. This avoids a race condition when the Cr50 is first booting that it may reset it's I2C slave interface during the first few I2C transactions initiated from coreboot. BUG=b:120009037 BRANCH=none TEST=Run the Cr50 factory update against Careena board. Confirm that I2C reads are retried until the DID VID is valid. Tested against debug Cr50 firmware that forced failure of cr50_i2c_probe() and verfied that coreboot shows recovery screen. Change-Id: I47c59a32378ad00336277e111e81ba8d2d63e69a Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/30295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-01-23src/drivers: Remove needless '&' on function pointersElyes HAOUAS
Change-Id: I7a99d0dcbc8ea1362a12a68fa519c49058d30a05 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-21lib/boot_device: Add API for write protect a regionRizwan Qureshi
Add API that should be implemented by the boot media drivers for write-protecting a subregion. Change-Id: I4c9376e2c2c7a4852f13c65824c6cd64a1c6ac0a Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/28724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-21drivers/spi: Add controller protection typeRizwan Qureshi
Some SPI controllers support both READ and WRITE protection add a variable to the protect API for the callers to specify the kind of protection they want (Read/Write/Both). Also, update the callers and protect API implementation. BUG=None BRANCH=None TEST=test that the mrc cache is protected as expected on soraka. Also tried if the read protection is applied correctly. Change-Id: I093884c4768b08a378f21242ac82e430ac013d15 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/30559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-18drivers/spi/winbond.c: Add the rest of >=1MB Winbond W25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I4d15d5acf0e2044e5128ce809c282fbcb35f24f0 Reviewed-on: https://review.coreboot.org/c/30746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-01-16drivers/generic/adau7002: Add wakeup-delay-ms propertyAkshu Agrawal
Passes out wakeup-delay to driver. This delay is applied at the start of capture to make sure dmics are ready before we start recording. This avoids pop noise at begining of capture. BUG=b:119926436 TEST= With kernel patch https://lore.kernel.org/patchwork/patch/1029806/ No pop sound heard at start of capture Change-Id: I32b18bf80fad5899ab4093a127dfd52d589bc365 Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/c/30724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
Does not fix 3rdparty/, *.S or *.ld or yet. Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/17656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-16drivers/spi/stmicro.c: Add the rest of >=1MB STMicro M25/N25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I69809fb638f59f0b399f3a1615f5d8d2b2ddae45 Reviewed-on: https://review.coreboot.org/c/30928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-16drivers/spi/sst.c: Add three remaining SST25*F080 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Idc63665937ab1bfdf15c4054001daa288bfdd47b Reviewed-on: https://review.coreboot.org/c/30927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-15vendorcode/intel/fsp1_0/broadwell_de: Use FSP from 3rdparty/fspPatrick Rudolph
Default to FSP binary and headers shiped in 3rdparty/fsp. * Drop headers and code from vendorcode/intel/fsp1_0/broadwell_de * Select HAVE_FSP_BIN to build test the platform * Fetch FSP repo as submodule * Make FSP_HEADER_PATH known from FSP2.0 useable on FSP1.0 * Introduce FSP_SRC_PATH for FSP source file * Add sane defaults for FSP_FILE Tested on wedge100s. Change-Id: I46f201218d19cf34c43a04f57458f474d8c3340d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2019-01-14[RFC]util/checklist: Remove this functionalityArthur Heymans
It was only hooked up for galileo board when using the obsolete FSP1.1. I don't see how it can be useful... Change-Id: Ifd7cbd664cfa3b729a11c885134fd9b5de62a96c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30691 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14drivers/intel/fsp1_1: Print the MTRR's FSP-T set upArthur Heymans
Change-Id: I19e9038eb52922fa0c248936438f27789d00ddb5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14drivers/intel/fsp1.1: Read stack guards laterArthur Heymans
Read back the stack guards after most of the romstage took place. Change-Id: Ia7dc26c7ed1750d4ebbe7514ed87da57f9e34a89 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14intel/fsp1_0: Add option to select FSP debug levelPatrick Rudolph
Useful for debugging FSP. Change-Id: I06e837cf1b051c55a531c3361e94fa1449bc8526 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/30741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2019-01-14drivers/spi/amic.c: Add the rest of >=1MB AMIC A25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: Ic5bd3e43e0d3fd5f454fae71b307c0682f203d5c Reviewed-on: https://review.coreboot.org/c/30884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14drivers/spi/adesto.c: Add the rest of >=1MB Adesto AT25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I8c0e6d8f1487ca90f88d4a56af3fb0e21458ef1e Reviewed-on: https://review.coreboot.org/c/30883 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14drivers/spi/gigadevice.c: Add the rest of >=1MB Gigadevice GD25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I333c8589ddc2bece488608ff66015ca8307eae0f Reviewed-on: https://review.coreboot.org/c/30882 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14drivers/spi/macronix.c: Add the rest of >=1MB Macronix MX25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards. Synchronizing with flashchips.c/h flashrom source code. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I4508a65a5bdcbf58aadf452de5e896fc3c5b1bc3 Reviewed-on: https://review.coreboot.org/c/30877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-14drivers/spi/spansion.c: Add more Spansion S25FL_K chipsMike Banon
Add S25FL208K (ID 0x4014), S25FL132K (ID 0x4016) and S25FL164K (ID 0x4017) chips in a way similar to S25FL116K (ID 0x4015) chip from the same family. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I9bf7197bbc0d12797c8ed100c673628de9c140f7 Reviewed-on: https://review.coreboot.org/c/30874 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13usbdebug: Remove option DEBUG_USBDEBUGKyösti Mälkki
Superseeded with DEBUG_CONSOLE_INIT. For dbgp_print_data() return early and skip reading registers when dprintk() would not get printed anyways. Change-Id: Idf470b8572ad992c8d4684a860412d9140f514ca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-11src/drivers/intel/wifi: Add a W/A for Intel ThP2 9260Gaggery Tsai
This patch adds a workaround for ThP2. The PCIe root port LCTL2.TLS is by default GEN1 and ThP has bad synchronization on polarity inversion. When the root port request for speed change, ThP doesn’t confirm the request, and both sides are moving to polling after timeout, hot reset is issued, and then most of the CFG space is initialized. From the observation, CCC/ECPM/LTR would be reset to default but CCC/ECPM of root port and end devices have been reconfigured in pci_scan. The LTR configuration for root port is still missing. BUG=B:117618636 BRANCH=None TEST=Warm/cold reset for 10 times and didn't see unsupported request related AER error messages & $lspci -vvs 00:1c.0|grep LTR and ensure LTR+ is presenti & $iotools pci_read32 0 0x1c 0 0x68 and ensure bit10 is set. Change-Id: Id5d2814488fbc9db927edb2ead972b73ebc336ce Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/30486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-10drivers/intel/fsp1_1: Add stack guardsArthur Heymans
This allows to check if stack overflows the car globals. Change-Id: I369b2d846f35914facb3e69cc762f7e555271bec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-01-10driver/spi/eon.c: Add the rest of >=1MB EON EN25 chipsMike Banon
Required for ACPI S3 suspend support at some motherboards, e.g. EN25QH32 chip entry for AMD Lenovo G505S laptop. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I8343a1741be5ea294de0773962c021428815934c Reviewed-on: https://review.coreboot.org/c/30744 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08arch/x86: Unify bootblock MMX register usageKyösti Mälkki
Have same usage of registers with romcc bootblock and C_ENVIRONMENT_BOOTBLOCK. Change-Id: Ibfa80e40f0b736a904abf4245fc23efc0cdc458d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-07usbdebug: Sanity check PCI EHCI locationKyösti Mälkki
If requested EHCI function is not on bus 0, we would need to open MMIO windows and configuration register space for the connected upstream PCI bridge for it to work. We don't plan to do so. Change-Id: I7c1c60f9d9890dedfedc9d977faf5152ba362692 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-07usbdebug: Probe for gadget only onceKyösti Mälkki
The first stage attempting to initialise usbdebug gadget will leave it marked as non-present if none is detected. This allows further stages to bypass usbdebug init sequence. Change-Id: I1491d7fab3c89f210fb03b32481f697bc7a1d1e6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-07usbdebug: Initialize the HW once in CAR stagesArthur Heymans
The EHCI hardware needs to be initialized only once during CAR stages. Some exception need to be made when a blob messes with the EHCI hardware. To achieve this add a fixed location in the car.ld linker script such that the ehci debug information can be shared across CAR stages. Currently this means only romstage and bootblock, but verstage can also be hooked up later on. Tested on google/peppy: Both the bootblock and the romstage properly output console. Change-Id: I78e20a172fd5cc81f366d580f3cce57b9545d7a2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-06usbdebug: Make the EHCI debug console work in the bootblockArthur Heymans
Currently this needlessly initializes the hardware in the both the romstage and the bootblock, but it works. Build option is renamed to USBDEBUG_IN_PRE_RAM to reflect the use better, related support files can be built to pre-ram stages regardless of usbdebug being enabled or not. Tested on Google/peppy (adapted to C_ENVIRONMENT_BOOTBLOCK). Change-Id: Ib77f2fc7f3d8fa524405601bae15cce9f76ffc6f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-06usbdebug: Refactor init callsKyösti Mälkki
Expose the function that can unconditionally re-initialise EHCI debug host and gadget. Given the missing header in soc/intel files that prevented building with USBDEBUG_IN_ROMSTAGE=y, it is not actually known if those SOCs work at all for usbdebug. Change-Id: I8ae7e144a89a8f7e5f9d307ba4e73d4f96401a79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
Change-Id: I2e28b9f4ecaf258bff8a062b5a54cb3d8e2bb9b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
Change-Id: Icf34b39d80f6e46d32a39b68f38fb2752c0bcebc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-03drivers/aspeed: Fix AST2400 POST failure without BMC FW or VBIOSTristan Corrick
This patch is from Linux, commit 3856081eede2. The commit message there is: > commit 3856081eede297b617560b85e948cfb00bb395ec > Author: Y.C. Chen <yc_chen@aspeedtech.com> > Date: Thu Feb 23 15:52:33 2017 +0800 > > drm/ast: Fix AST2400 POST failure without BMC FW or VBIOS > > The current POST code for the AST2300/2400 family doesn't work properly > if the chip hasn't been initialized previously by either the BMC own FW > or the VBIOS. This fixes it. > > Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> > Tested-by: Y.C. Chen <yc_chen@aspeedtech.com> > Acked-by: Joel Stanley <joel@jms.id.au> > Cc: <stable@vger.kernel.org> > Signed-off-by: Dave Airlie <airlied@redhat.com> Tested on a Supermicro X10SLM+-F with an AST 2400 where the BMC flash chip has been completely erased. Before the patch, the display resembled a rainbow. After the patch, the display works well. Original-Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Original-Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Original-Tested-by: Y.C. Chen <yc_chen@aspeedtech.com> Original-Signed-off-by: Dave Airlie <airlied@redhat.com> Change-Id: I72efcf907fbd1263fe21d4f36fe900b305419c44 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30507 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-30drivers/uart/oxpcie: Fix early consoleKyösti Mälkki
Fix build for POSTCAR_STAGE=y. Also add driver for bootblock and verstage. Change-Id: If57033353c07854e21b630c58ad69931eb572da9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-28intel/fsp1_0/cache_as_ram.inc: Use tabs instead of white spacesElyes HAOUAS
Change-Id: I93cf734daefabe1f7cfaa5f49ba789ac04c8a635 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-28drivers/amd/agesa/cache_as_ram.S: Fix coding styleElyes HAOUAS
Change-Id: Iada9b3ba71b991b6f9c7ebb5f300c8d28829ab4f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-12-28intel/gma/Makefile.inc: Add a helper function to add VBT binariesArthur Heymans
This adds a convenient helper function to add vbt binaries to cbfs. Change-Id: I80d9b3421f6e539879ad4802119fe81d7ea1e234 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30430 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-24driver/spi/eon.c: Add EN25F80Arthur Heymans
TESTED on ASUS P5QPL-AM (writes MRC_CACHE) Change-Id: I5aebe4703a033a0f0226f405d8933b12f3af136f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30249 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-24drivers/aspeed/ast: Select `MAINBOARD_HAS_NATIVE_VGA_INIT`Tristan Corrick
Any board that uses the AST driver will have support for native graphics init. So, select the option in the driver instead of every board. Change-Id: I2bf42c168d1ffdda11857854889b74953abd7e40 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-22cbmem: Always use EARLY_CBMEM_INITKyösti Mälkki
Wipe out all remains of EARLY/LATE_CBMEM_INIT. Change-Id: Ice75ec0434bef60fa9493037f48833e38044d6e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-213rdparty/libgfxinit: Update submodule pointerArthur Heymans
Updates to current master. This includes: - A fix for textmode scaling on G45 - Refactor things to rely less on inline proving - Increased width of modeline fields to 32 bits Change-Id: Iab2915b747f6e4fa4e78eb28fea29bb3a9b3b687 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30311 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19{device,drivers}: Remove useless include <device/pci_ids.h>Elyes HAOUAS
Change-Id: Ib96bf7d48711f518e36f8d12244b5749d84a0f68 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-18{drivers,superio}: Remove unneeded include <pc80/mc146818rtc.h>Elyes HAOUAS
Change-Id: Ia42c1f8559667e7711fac919df8bfbee8455e3cc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-18Fix typos involving "the the"Jonathan Neuschäfer
Change-Id: I179264ee6681a7ba4488b9f1c6bce1a19b4e1772 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-10drivers/generic/gpio_keys: Add mechanism to configure GPE wake eventKarthikeyan Ramasubramanian
Add mechanism to configure GPE wake event which in turn can be used as ACPI Power Resources for Wake BRANCH=octopus BUG=b:117953118 TEST=Ensure that the wake GPE event is added to ACPI Power Resource for Wake. Change-Id: Iacc12b8636aaac98a8689a211cbe1dcfe306f342 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-07drivers/i2c/designware: Add soc_clock entry for 216MHzDuncan Laurie
Add an entry to the soc_clock table for a 216MHz clock so that the I2C controller clock is calculated correctly when the I2C bus is used in coreboot. This was tested by measuring the I2C clock speed on H1 I2C bus on a sarien board in coreboot and ensuring it is ~400KHz. Change-Id: I6c3cacdad318a5ce41bc41e3ac81385c2d4f396c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05drivers/smmstore: Allow using raw FMAP regionsArthur Heymans
Use a raw fmap region SMMSTORE for the SMMSTORE mechanism, while keeping the initial option to use a cbfsfile. TESTED on Asus P5QC, (although it looks like the tianocore patches using it might need some love as they can't seem to save properly). Change-Id: I8c2b9b3a0ed16b2d37e6a97e33c671fb54df8de0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-04acpi_pld: Make it easier to define the ACPI USB device groupsDuncan Laurie
The Linux kernel can use the ACPI _PLD group information to determine peer ports. Currently to define the group information the devicetree must provide a complete _PLD structure. This change pulls the group information into a separate structure that can be defined in devicetree. This makes it easier to set for USB devices in devicetree that do not need a full custom PLD. This was tested on a sarien board with the USB devices defined by verifying that the USB 2/3 ports are correctly identified with their peer in sysfs. Change-Id: Ifd4cadf0f6c901eb3832ad4e1395904f99c2f5a0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 01:50:10 +0000