summaryrefslogtreecommitdiff
path: root/src/ec
AgeCommit message (Collapse)Author
2019-05-24ec/google/wilco: Fix radio control commandDuncan Laurie
This command is working as written, but it is not actually correct as to what the format of the command should be. Fix this and add define the other radios. There is no change in the command send to the EC. Change-Id: Ia551b08561b673d27bec2f900d97b746699b30c4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-05-22ec/google/wilco: set diagnostic LEDs on boot failureKeith Short
On Wilco devices, if any of the coreboot stages fails with a fatal error, set the diagnostic LEDs with the Wilco EC. The last saved post code is used to determine the error code sent to the EC. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms TEST=Remove DIMM module, confirm diagnostic LED pattern for memory failure (2 amber, 4 white). TEST=Forced a fatal error in both bootblock and verstage to confirm diagnostic LEDs during these stages. This works on cold-boots only. Bug b:132622888 tracks the mailbox failures on warm boots. Change-Id: If865ab8203f89e499130f4677fec166b40d80174 Signed-off-by: Keith Short <keithshort@chromium.org> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20ec/google/wilco: Add support for KB_ERR_CODE to Wilco ECKeith Short
Adds support for the KB_ERR_CODE command on the Wilco EC. This command is used to drive diagnostic LEDs on the platform after a failed boot. This change also adds the Wilco EC mailbox command support to bootblock and verstage so that those stages can use the KB_ERR_CODE command. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I96d17baf57694e4e01c676d80c606f67054cd0c3 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32776 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-13src/ec/lenovo/h8/acpi: Serialize Control MethodElyes HAOUAS
IASL reports warning 'Control Method should be made Serialized'. Change-Id: I034f2c00e912e8f9ef87b9918de1db06fade38b9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-08ec/lenovo/h8: Add VBOOT board supportPatrick Rudolph
Use Fn-Key as recovery mode switch. Tested using Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6. Change-Id: I2c682431b3f09839db265259205104bd9ef4abfc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-05-08ec/lenovo/h8: Add function to query sense statePatrick Rudolph
* Add function to wait for sense registers to become valid. * Add function to retrieve Fn-Key state. Tested on Lenovo T500: * It takes about 700msec for the registers to become valid. Tested on Lenovo T520: * It takes less than 150msec for the registers to become valid. Change-Id: Ie27e2881a256c4efb3def11f05070c446db6e5fc Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-18ec/google/wilco: Support board_id with EC provided IDDuncan Laurie
The EC can return a board ID value similar to the Chrome EC. In order to use this for the board version returned by SMBIOS this commit implements the board_id() function for mainboards that use this EC. BUG=b:123261132 TEST=Check /sys/class/dmi/id/board_version to see that it is reflecting the value that the EC provides. Change-Id: I3fbe0dc886701f37d2424fe7a2867fd860fa1ec0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32276 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-18ec/google/wilco: Send "logo displayed" progress codeDuncan Laurie
This progress code enables keyboard backlight control that otherwise would only work 30 seconds after boot. This code is already defined but it was not being sent by coreboot. It is run in the "post device" step between the other defined progress codes. BUG=b:130754032 Change-Id: Ica6c622e568cb236c17bf3edb6639d0177510846 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-03-29src: Use include <reset.h> when appropriateElyes HAOUAS
Change-Id: I3b852cae4ef84d257bf1e5486447583bdd16b441 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-28ec/google/wilco: Add ACPI _BIX method for batteryDuncan Laurie
I added a method to fill out the _BIX package structure but never hooked it up to the expected _BIX method that the OS uses. This change adds _BIX method and uses the existing method to fill it out. It also adds ^ before the _UID in _BIF to match _BIX as the _UID is one level above the method. Change-Id: I0de91369b6780fd9432990732c1078a73f6a3419 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-28ec/google/wilco: Add a romstage init function to send progress codeDuncan Laurie
When using FSP with debug enabled it takes too long to get to ramstage and send the first progress code to the EC. The same thing has been reported to happen when 2x16GB memory is installed. BUG=b:127875364 TEST=boot with FSP debug and ensure EC does not try to turn off the system while it is still booting. Change-Id: I5676354f5e53540273a9029411507f91864735a1 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-21Revert "UPSTREAM: ec/google/wilco: Enable software sync for VBOOT"Duncan Laurie
This reverts commit 51169b7dda4a1978d622e329a1c40e384471c165. I was not ready to enable this option yet, until it is enabled in depthcharge it needs to stay off in coreboot or depthcharge will attempt to do software sync without a proper driver. Change-Id: I4840812d0541f822502cfc5c66bed27edf4d2ecc Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32007 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-21ec/google/wilco: Add function to indicate if EC uses signed FWDuncan Laurie
This will be used to distinguish the mainboard SKU so that the correct EC firmware can be bundled with the board. This is read from EC RAM so it can be used by an ACPI method in the future. BUG=b:119490232 Change-Id: I71b8017fc4b88e793dfe709e1cb1ab0f0bcdc4fa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18ec/google/wilco: Enable software sync for VBOOTDuncan Laurie
Enable software sync by default if VBOOT is enabled. The slow update option is also needed, but this is moving to depthcharge so it is not defined here. Change-Id: I046661fae7315f84e96293532b4e1568558df962 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18ec/google/wilco: Fix handling of commands that do not respondDuncan Laurie
If the command does not respond the driver should not wait for it to complete before returning. Tested with SMI debug enabled to ensure that the final command does not report a failure. Change-Id: I7c1bfa19a92e8332ac1aa6ff95f94ff4cbdf789d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-16src: Drop unused '#include <halt.h>'Elyes HAOUAS
Change-Id: Ie7afe77053a21bcf6a1bf314570f897d1791a620 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-03-15ec/google/wilco: Clear S0ix support bit at bootDuncan Laurie
To ensure the power button functions as expected in firmware ensure that the EC is not in "S0ix supported OS" mode and expecting the power button to be handled by the virtual button interface. BUG=b:128409889 TEST=Verify that the power button works at the developer screen when the system is rebooted from within Chrome OS. Also ensure that it works when external warm reset signal is asserted by H1. Change-Id: Ic323515e3b8be08bac4f0f82e25f2f78c2f22833 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-15ec/google/wilco: coalesce tent mode to tablet modeJett Rink
Both tent mode (0x01) and tablet mode (0x02) should be considered tablet mode by ChromeOS. BRANCH=none BUG=b:122052438 TEST=ChromeOS enters tablet mode when lid angle exceeds 180 Change-Id: I89ba8141350fc628c8cff89d5f33aa47c6ae6afe Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06ec/lenovo/h8: Implement ACPI methods to set battery thresholdsAlexey Kharlamov
There are two known reverse-engineered ways to manage battery thresholds. This patch implements them and adds a way to enable them for different mainboards. Tested on W530 with 4.18.3-gentoo kernel and X220 with 4.20.11. Works fine with new Linux userspace API for controlling battery thresholds, available since 4.17. (/sys/class/power_supply/BAT0/charge_(start|stop)_threshold). The new API is supported by TLP (you might need to set NATACPI_ENABLE=1 in /etc/tlp.conf). tpacpi-bat works fine too. Signed-off-by: Alexey Kharlamov <der@2-47.ru> Signed-off-by: Evgeny Zinoviev <me@ch1p.com> Change-Id: I2a90f9e9b32462b8a5e9bc8d3087ae0fea563ea5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/23178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-04device/pnp: Add header files for PNP opsKyösti Mälkki
Change-Id: Ifda495420cfb121ad32920bb9f1cbdeef41f6d3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31698 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04Fix indirect include for endianessKyösti Mälkki
The function (preprocessor macro) we need is defined in <endian.h> not <swab.h>. Change-Id: I3a86c7050bf853e3a56a15421132240e19f40912 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31704 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-27ec/google/chromeec: fix the error status passingYH Lin
Various instances of google_chromeec_command() can return non-zero number (both positive and negative) to indicate error -- fixing cbi_get_uint32() and cbi_get_string() so they follow the same convention. BUG=b:123676982 BRANCH=kukui TEST=build with kukui/flapjack configurations Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I7f0a8a61d01d942cba57036a17dd527fdbbf940c Reviewed-on: https://review.coreboot.org/c/31585 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-26ec/google/chromeec: Clarify return value of google_chromeec_commandDaisuke Nojiri
This patch clarifies the definition of google_chromeec_command. Currently absence of the definition isn't causing any problem because wrapper APIs check 'ret != 0' or wrapper APIs check 'ret < 0' for an interface which returns only negative error codes. However, there is a chance that a new wrapper API will be addedl which check 'ret < 0' to catch errors, assuming other interfaces behave the same. Or existing wrapper APIs will be broken as soon as they're compiled for another interface. BUG=chromium:935038 TEST=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I2ce7109b5f2a1d5294f167719730bc1f039ba03f Reviewed-on: https://review.coreboot.org/c/31613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-02-25ec/google/wilco: Fix ACPI power status eventsDuncan Laurie
This change fixes the power status events for AC and battery events from the EC. The register that was being used is not returning the expected information. BUG=b:125472740 TEST=enable ACPI debug in the kernel and verify that AC and battery insert/remove are detected properly. Change-Id: I15f71fcf0ca6aa9438e951865787c9fc273792d8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-11ec/lenovo/h8/Kconfig: increase ps2 kbd timeout from 3000 to 5000msMichael Bacarella
On my Thinkpad T420 the default 3000ms SeaBIOS timeout is too short, it takes nearly 5000ms for my keyboard to become ready. Timing out before it's ready leads to pretty bad behavior: I cannot use my keyboard at all to control SeaBIOS, nor the subsequent GRUB instance. Linux is fine though, possibly because it does its own keyboard init. Signed-off-by: Michael Bacarella <michael.bacarella@gmail.com> Change-Id: Id1681bf3921c8b5dc124d4c4e9072f146f84f3a2 Reviewed-on: https://review.coreboot.org/c/31279 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-11mb/google/kahlee: Use GPIO_10 for EC_SYNC_IRQEdward Hill
Use AGPIO 10 as the EC sync interrupt for MKBP events for sensor data. On this platform, interrupts are routed via the GPIO controller so need to be registered using GpioInt instead of Interrupt. BUG=b:123750725 BRANCH=grunt TEST=MKBP events still received (with matching EC and kernel changes) Change-Id: If499d24511bbaa7054207b7e0b98445723332c4f Signed-off-by: Edward Hill <ecgh@chromium.org> Reviewed-on: https://review.coreboot.org/c/31278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-02-05ec/google/wilco: Add virtual button supportDuncan Laurie
Add an ACPI device that is compatible with the Intel Virtual Button kernel driver for reporting tablet mode state and various virtual button events that may come from the EC. This driver is used in Windows and in the Linux kernel at drivers/platform/x86/intel-vbtn.c Because of a check in the kernel driver it expects the board to define the SMBIOS enclosure type as convertible for the check at driver load time for tablet/laptop and dock/undock to work. The virtual tablet mode button will proxy the tablet mode state sent from the Sensor Hub to a SW_TABLET_MODE event in the kernel. The virtual power button is used during S0ix for the EC to wake the system with an SCI. There are separate press and release events which are sent for completeness, although the kernel driver will ignore the release event. BUG=b:73137291 TEST=Test that the power button can wake the system from S0ix. Also verify that the device is reported as laptop mode at boot. Change-Id: I0d5dc985a3cfb1d01ff164c4e67f17e6b1cdd619 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31208 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-04ec/google/wilco: Add ACPI device for event interfaceDuncan Laurie
Add a separate ACPI device for the Wilco EC event interface so that the OS drivers can bind to it separately. Since the event handling is all done with ACPI and not mailbox calls this will be implemented as a standard acpi_driver in the kernel. BUG=b:119046283 TEST=veriy device exists in DSDT Change-Id: I5259a926fb6d5faea835bcdefa12f0184c5adf4a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-04ec/google/wilco: Add S0ix support handlersDuncan Laurie
1) In the EC _REG method set the flag indicating S0ix support in the OS. 2) Add a function that can be called by the LPI _DSM method to indicate to the EC that the OS is entering or exiting S0ix. BUG=b:73137291 Change-Id: Iddc33a08542a6657694c47a9fda1b02dd39d89f7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31094 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30ec/google/chromeec: Add boardid.c to verstageYou-Cheng Syu
Modifiy Makefile so that we can get board ID in verstage. BRANCH=none BUG=b:117916698 TEST=manually Change-Id: Idcdb6e07f565c937185cab811abac0ce47e5e3a7 Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/31006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-01-24ec/google/wilco: Turn on wake up from lidLijian Zhao
Send required EC command to enable ACPI S3 wake up from lid switch. BUG=b:120748824 TEST=Put Sarien system into S3 and then wake up from lid switch successful. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I13f3469847b0886147b8b624311a1ece796f847b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-01-24ec/kontron: Add support for Kontron kempldNico Huber
A programmable logic device used by Kontron as EC on their COM express modules. The name `kempld` is taken from Linux kernel sources, as is the I2C driver. The meaning of the acronym is unclear, probably: Kontron Embedded Module PLD. Change-Id: If9a0826c4a8f5c8cd573610c2d10561334258b36 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-12-28ec/chromeec: fix LPC read/write for MEC devicesMatt DeVillier
Commit 8cf8aa2 [ec/google/chromeec: Use common MEC interface] changed the return mechanism for the checksum on reads/writes for MEC devices, but incorrectly handled the passed-in csum parameter by not dereferencing. This led to the returned csum value always being zero, which causes all EC commands with non- NULL data_in to fail with a checksum error. Fix this by storing the returned checksum in a temp variable, and only assigning to csum when the pointer isn't NULL; Test: build/boot google/chell, verify EC hello command succeeds, keyboard backlight turned on at boot. Change-Id: I7122c3fdc5a19f87f12975ee448728cf29948436 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/30444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-06lenovo/h8,thinkpads: Re-do USB Always OnNathaniel Roach
Re-write the UAO handling code as it had stopped working (#171) (the flag was not getting read from the RTC properly in SMM) Remove the SMM code as it's not needed (but EC flag won't be set upon entering S3 now) Set the EC flags on boot the same way other flags are set Document bitwise operators for clarity Propagate changes to other Thinkpads (updated X201 to have 2 bits for the flag as it only had 1) Per Nicola Corna's previous commits, 0x0d is set for "AC only" "AC only" does exhibit different behaviour - the USB port is turned on a few seconds after entering S3, rather than < 1 sec, regardless of AC status Tested on X220 Change-Id: If812cd1ef8fb1a24d7fadbe834f574b40cbcd56a Signed-off-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-on: https://review.coreboot.org/c/29565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-12-04ec/google/wilco: Turn camera power onDuncan Laurie
Send the EC command required to turn the camera power on and verify that it shows up on the USB bus. Change-Id: I9e9ba712a11cef85cde91ac21a4b6b5090ef58dc Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco: Guard DTPF with ifdefDuncan Laurie
There is a dependency issue with the EC DPTF code accessing methods that are external, but once the mainboard includes the relevant code they become internal and the current version of IASL used by jenkins will fail to compile it. Until the new IASL is deployed everywhere wrap the EC DPTF code and expect that the mainboard will explicitly enable it. Change-Id: I612ad8f86d424060ca0303d267d7c2915c760173 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04ec/google/wilco/acpi: Add DPTF supportDuncan Laurie
Add the support needed for DPTF. This includes the methods to write trip point values, read temperatures, and handle events. This was tested on a sarien board by inspecting AML debug output with the kernel while monitoring temperatures and trip points in sysfs and controlling temperatures with a fan to ensure that when a trip point is crossed an SCI is generated and the event is handled properly. Change-Id: I8d8570d176c0896fa709a6c782b319f58d3c1e52 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29761 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco/acpi: Fix issues and clean upDuncan Laurie
- Disable debug output from read/write methods by default - Use argument to _REG to disable SCI when EC is unregistered - Change read/write macros to sync level 2 so they can be called when a mutex is already held - Define some missing events Change-Id: Ic65ebbb6a6151444c47b4aeff7429e186856c49a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29760 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Fix extended event handlingDuncan Laurie
Extended events will be handled by the OS kernel driver, but that driver needs a method exposed by ACPI to read the event data from the EC and into a buffer. Tested by generating a hotkey event and reading the buffer from the Linux kernel driver with acpi_evaluate_object(). Change-Id: Ic8510e38d777a5dd31a5237867313efefeb2b48e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29674 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable WiFi radioDuncan Laurie
Add EC command to enable WiFi radio and send that command at startup. Tested to ensure WiFi is functional on a sarien board. Change-Id: Iac46895c7118567e1eb55ea33051a1662103b563 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29673 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04ec/google/wilco: Enable COM1 ACPI deviceDuncan Laurie
Enable the COM1 ACPI device based on the existing Kconfig option CONFIG_DRIVERS_UART_8250IO instead of expecting the mainboard to also define another value for ACPI. Change-Id: I69361cc2c245cfcad3e4f57567bf56d5a26f0b06 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29672 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30cpu/intel/model_206{5,a}x: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Automatically generate \PPKG in SSDT. Change-Id: Iecc54e94484f5f11e0ba8ef6d1d844276e484b4d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29886 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16ec/google/chromeec: add support for retrieving OEM nameWisley Chen
OEM name can be stored in CBI. This change can support for fetching the OEM name from CBI. BUG=b:118798180 TEST=Verified to get data from CBI Change-Id: I4938c4d60fcad9e1f43ef69cc4441d1653de7e24 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-11-15google/chromeec/acpi/ec: Add support for Device DPTF Profile NumberKarthikeyan Ramasubramanian
In order to support Multi-DPTF profile, Device DPTF Profile Number is introduced into EC_ACPI_MEM_DEVICE_ORIENTATION ACPI Space at offset 0x09. This bit field stays along with Tablet Mode Device flag. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes(base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: Ie14916ac16c50cbe0990021e2eb03d5121cd0e07 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-15ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT configKarthikeyan Ramasubramanian
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES since it aligns with the use-case. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes (base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-11-12ec/google/chromeec: Configure EC_SYNC_IRQ as level triggeredFurquan Shaikh
EC_SYNC_IRQ from EC to host is level-triggered in practice and configuring it as edge-triggered on the host results in host missing events if there are multiple events queued on the EC side. This is because Linux kernel driver reads one event per irq and the EC does not de-assert the interrupt line until all events are drained out. This results in event queue being filled up completely on the EC and the host failing to see any of those events. This change configures EC_SYNC_IRQ as level triggered to allow the host to read events from the the EC as long as the line is asserted. BUG=b:118949877 Change-Id: Id3fcfa0445f83865d57975a7bbc179dca047ba4c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aseda Aboagye <aaboagye@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 13:18:53 +0000