| Age | Commit message (Collapse) | Author |
|---|
|
src/ec/google/chromeec/ec_lpc.c: In function ‘google_chromeec_command_v3’:
src/ec/google/chromeec/ec_lpc.c:88:3: error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘unsigned int’ [-Werror=format=]
printk(BIOS_ERR, "EC cannot send %ld bytes\n",
^
cc1: all warnings being treated as errors
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Change-Id: I0d47350f00102a959d54a64b8f932099fc13f886
Reviewed-on: http://review.coreboot.org/9558
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Log the new EC panic host event.
BUG=chrome-os-partner:36985
TEST=Manual on Samus. Trigger EC panic, verify that "Panic Reset in
previous boot" is seen in /var/log/eventlog.
BRANCH=Samus
Change-Id: If59c522bd06f308a7ee6c5ff69ea427fcea361c9
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: dae4eb50b3607c5141a77fce6709107283f5dc36
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: I89b358a81a962fd463101d84b6bcf3b0a12830c7
Original-Reviewed-on: https://chromium-review.googlesource.com/252391
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: http://review.coreboot.org/9508
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds a few retries to NVRAM read/write transactions with the
EC. Failing to read the NVRAM is not fatal to the boot, but it's still
pretty bad... especially since a single initial read failure will cause
vboot to blindly reinitialize the whole NVRAM with zeroes, destroying
important configuration bits like dev_boot_usb. The current EC
transaction timeout is one second, so the three retries added here can
potentially increase boot time by three seconds per transaction... but
this shouldn't happen in any normal case anyway, and if there are errors
a little extra wait is probably preferrable to nuking your NVRAM.
(Also, added a missing newline to an error message in the EC code.)
BRANCH=veyron
BUG=chrome-os-partner:36924
TEST=Booted a Jerry with the power button bug with a 2 second press,
noticed that the first two transactions failed but the third one
succeeded.
Change-Id: I5d1cf29ac1c555ea2336ebb0b0e0a3f7cbb9c3fd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 894a8a0b4a9805e92544b5e3dfa90baf6d36649a
Original-Change-Id: I6267cdda2be2bad34541b687404c2434d3be345b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/251694
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9507
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With kconfig understanding wildcards, we don't need
Kconfig files that just include other Kconfig files
anymore.
Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9298
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Some ECs may require a few microseconds to ramp up their clock after
being awaken by /CS assertion. This adds a Kconfig variable that can
be overridden at the mainboard-level which will force a delay between
asserting /CS and beginning a transfer.
BUG=chrome-os-partner:32223
BRANCH=none
TEST=verified ~100us delay using logic analyzer
Change-Id: I6d9b8beaa808252f008efb10e7448afdf96d2004
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: ec6b10e4e3f0362dea0dc8046cfd4e4615a42585
Original-Change-Id: Ibba356e4af18f80a7da73c96dadfda0f25251381
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220242
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-on: http://review.coreboot.org/9217
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The EC behavior for reading events from the ACPI interface was broken
with this commit:
d899fda lpc: ACPI query-next-event drops masked events
https://chromium-review.googlesource.com/194935
This is causing no EC wake events to be logged. To make sure they are
logged once again set the wake mask before querying for events.
Also remove the check for port80 event logging since this is no longer
used as we now store the port80 code in CMOS and this is unnecessary
commands to do for the resume path.
BUG=chrome-os-partner:32462
BRANCH=samus,auron
TEST=build and boot on samus, check for EC wake events for keyboard
and lid in the event log.
Change-Id: Ib46fc00006ff0e5777941fc3ab1d81607359c4cb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b4dccc03bdded8411cc1429521579ea006ec58a7
Original-Change-Id: Icdd0c1a37a94e0cbd9fd256172324bf989e6d0dc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220373
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9215
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a new host event to send a notify(0x80) to the battery
when the EC indicates that battery status has changed.
The kernel has fixed the bug with _BIX method so it can
be enabled now.
BUG=chrome-os-partner:32196
BRANCH=samus
TEST=build and boot on samus
Change-Id: I1b8068df7abf1c8ebdc3a89602896b863accb7f3
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a779fc7f32729adb60d8bc220325444ebc20e0d2
Original-Change-Id: I0ebb17e5441e875875d98168ce3c31486d57330e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220320
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9212
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to talk to the PD controller with a passthru command
coreboot needs to be able to use v3 commands.
The command version is automatically detected based on the
advertized flags from the EC.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=boot on samus EVT
Change-Id: I032eb185d80d5b68c82609910045e21d4521afcc
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4f664b22645f0def87a73e9255297b3edccf436e
Original-Change-Id: I94ace7741c9cd592921625fb793787247a5ca2aa
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218902
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9203
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Coreboot needs to be able to reboot the PD controller into RO
image in recovery mode early in the boot process in order to
avoid a lengthy recovery mode boot if it is only done at vboot
software sync time.
In order to do this a new device index field is added to the
command structure which must be initaalized to zero for all EC
transactions.
This early init and image check code is only used in romstage so
include it in the __PRE_RAM__ block.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=build and boot on samus EVT in recovery mode and see that
the PD is rebooted to RO mode early in the boot.
Change-Id: Iee60aae4d49b83b4a377b71e41e8109858a90223
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b36cf37d9b5a7053ecbd15c748eac84836d413e1
Original-Change-Id: Iebc48709b527d3571618da775c849e1c3fcd6384
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218903
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9204
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This latest version includes PD passthru support.
BUG=chrome-os-partner:30079
BRANCH=None
TEST=build and boot on samus
Change-Id: Ie718b73a6b125a863ae28e63769dd54edc267f0b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fbca0743a4b45828a466d05afc3a2e94d2e3da2e
Original-Change-Id: I79d160219564155008f6231fec35808d1fbd6f04
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218901
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9202
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When doing an EC requested reboot to RO mode clear the
saved post code in order to prevent confusing events in
the log where the system is rebooted intentionally.
BUG=chrome-os-partner:28234
BRANCH=none
TEST=build and boot on samus, run FAFT, check for odd
eventlog entries about last post code 0x31 when it is
rebooted during samus romstage entry point.
Original-Change-Id: I8bedc611712424bf1044cdca1972e34ffdd51abd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215681
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit e32d7a7e54e7006b84509dbc2bfe9b4b022eba71)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iad816669fb4054260f995f6f0bfb140121aaddff
Reviewed-on: http://review.coreboot.org/9176
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Add ACPI device for PD MCU, if present. Call Notify routine when the
corresponding EC host event is received.
BUG=chrome-os-partner:31361
TEST=Manual on Samus. Enable EC_ENABLE_PD_MCU_DEVICE, unmask PD MCU host
event, and verify ACPI Notify routine is called when host event is sent
from EC.
BRANCH=None.
Original-Change-Id: I6db61031e434d7ecb211802a4caeaba051e22a28
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214809
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Alec Berg <alecaberg@chromium.org>
(cherry picked from commit 226b349e40ed8eacce20d0a8063877382f707c69)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iecff6c06f1b37651ff61e36d6085d397d66f861c
Reviewed-on: http://review.coreboot.org/8968
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Simplify the SPI timeout by using the stopwatch.
BUG=None
BRANCH=None
TEST=Built nyan. Confirmed stopwatch works independently.
Change-Id: Ida26a0748d4b5a6a28aa8f6e2b92fe2ee4cbe17f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 900d7ac826b76d49290033c87849bf776684f2c1
Original-Change-Id: I84b7949060326b7c6cc1872420b93bd44604c4d3
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219493
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/8816
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Certain boards need to speak proto v3 over i2c. Leverage the
transport agnostic API to share the logic with other proto v3
impelementations.
BUG=chrome-os-partner:31148
BRANCH=None
TEST=Built and ran on ryu. Can talk to the EC successfully.
Change-Id: I1d0cd6907057af4ded3c4460193bbe1d897a1db7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cb9ac965ad04c9491f40fd9aa595176a28a467b3
Original-Change-Id: Ib699120fd232392e8caa0889c2bf40f4587a8a35
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211139
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Depending on the transport mechanism for proto v3 different bytes
need to be send and/or read before the request and response. Depending
on the software and/or controller interface that requirement leads to
needing to copy data into temporary buffers. Avoid this by allowing
the transport mechanism to provide the request and response
buffers.
BUG=chrome-os-partner:31148
BRANCH=None
TEST=Built for rush and ryu. Ran on ryu with i2c implementation.
Also built for rambi to check x86 systems.
Change-Id: I35d4d69bd1fa900fc0cfe3822496f381405bdcb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c7224426e1d0bcf06ed010131a2462a6ca201d8b
Original-Change-Id: Iad6cce566a253ca72e6f5009a97235ece0a6c1b5
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211138
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8827
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The EC doesn't return any data when one performs a write to
VBNV context. Therefore there is a mismatch of expectations.
Correct this by properly setting the expected response length.
BUG=chrome-os-partner:31148
BRANCH=None
TEST=No longer hanging while writing to VBNV on ryu.
Change-Id: I7077a507c3280358dac1f88ece62cacee9b71bea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c1735c3377163aeb9e90155cb9f081a1eea919c9
Original-Change-Id: I455724f20f5442bd62a792f09273227417475f07
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211137
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8826
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
SERIRQ_CONTINUOUS_MODE is specific feature of LPC busses.
This fixes a KCONFIG unmet dependency warning on ARM mainboards with
chromeec.
Change-Id: Iae61986219585dcb1124cf3b24fa32a8596d56c8
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8665
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The existing code generated invalid ACPI processor objects
if the core number was greater than 9. The first invalid
object instance was autocorrected by Linux, but subsequent
instances conflicted with each other, leading to a failure
to boot if more than 10 CPU cores were installed.
The modified code will function with up to 99 cores.
Change-Id: I62dc0eb61ae2e2b7f7dcf30e9c7de09cd901a81c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8422
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze.
BUG=none
Branch=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Ia5353018a0db3dae2e0432b7e6a34d46f81b0ffa
Original-Reviewed-on: https://chromium-review.googlesource.com/206064
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit b420451c71c86bc27784d920f53870ee56ddc0f2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I30c9f0ac44de0a5816b5b8d0ded2dc7d7e77c7a1
Reviewed-on: http://review.coreboot.org/8162
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The EC can export ALS information if the sensor is attached
to it directly rather than to the host. This adds a basic
ACPI ALS device and implements the required information.
The kernel does not use the _ALR tuple set but it is required
by the ACPI spec so this just adds the sample two point
response curve defined in ACPI 5.0 section 9.2.5.
The EC does not currently send events for lux value changes so
a polling interval of 1 second is defined.
BUG=chrome-os-partner:24208
BRANCH=None
TEST=build and boot on samus, add acpi-als driver to the kernel
and read /sys/bus/iio/devices/iio:device0/in_illuminance_raw
Original-Change-Id: Id29b72a68aa21c1a7c71d5f87223ac010cef0377
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/203743
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 81f44b33b87a6ee3079b8ef6efffacd0eeb0283f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5a0ccd30e8b453675beaf7d0363dbfa162bd5b3f
Reviewed-on: http://review.coreboot.org/8132
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the empty weak function clear_recovery_mode_switch().
Problem:
If GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC is set,
the following will happen:
1. Boot device in recovery mode with Esc + F3 + Pwr.
2. Turn device off with Pwr button.
3. Turn device on with Pwr button.
Device still boots to recovery screen with
recovery_reason:0x02 recovery button pressed.
If GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC isn't set, turning the
device off and on again with the Pwr button does a normal boot.
Solution:
Unconditionally clear the recovery flag.
BUG=chromium:279607
BRANCH=TOT
TEST=Compile OK.
Original-Change-Id: Ie1e3251a6db12e75e385220e9d3791078393b1bf
Original-Signed-off-by: Sheng-Liang Song <ssl@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/197780
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Commit-Queue: Sheng-liang Song <ssl@google.com>
Original-Tested-by: Sheng-liang Song <ssl@google.com>
(cherry picked from commit 18908bb64cef34ca41812814817ef887961bed34)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I71ca9f3ea8d816c865375ec66a0603ca211f23ae
Reviewed-on: http://review.coreboot.org/7895
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The new API is in use in depthcharge and is based around the "i2c_transfer"
function instead of i2c_read and i2c_write. The new function takes an array of
i2c_seg structures which represent each portion of the transfer after a start
bit and before the stop bit. If there's more than one segment, they're
seperated by repeated starts.
Some wrapper functions have also been added which make certain common
operations easy. These include reading or writing a byte from a register or
reading or writing a blob of raw data. The i2c device drivers generally use
these wrappers but can call the i2c_transfer function directly if the need
something different.
The tegra i2c driver was very similar to the one in depthcharge and was simple
to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and
replace the ones in coreboot. The Exynos 5420 driver was ported from the high
speed portion of the one in coreboot and was straightforward to port back. The
low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot
and were replaced with the depthcharge implementation.
BUG=None
TEST=Built and booted on nyan with and without EFS. Built and booted on, pit
and daisy.
BRANCH=None
Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193561
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe)
This cherry-pick required additional changes to the following:
src/cpu/allwinner/a10/twi.c
src/drivers/xpowers/axp209/axp209.c
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7
Reviewed-on: http://review.coreboot.org/7751
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The SPI drivers for tegra and exynos5420 have code in them which waits for a
frame header and leaves filler data out. The SPI driver shouldn't have support
for frame headers directly. If a device uses them, it should support them
itself. That makes the SPI drivers simpler and easier to write.
When moving the frame handling logic into the EC support code, EC communication
continued to work on tegra but no longer worked on exynos5420. That suggested
the SPI driver on the 5420 wasn't working correctly, so I replaced that with
the implementation in depthcharge. Unfortunately that implementation doesn't
support waiting for a frame header for the EC, so these changes are combined
into one.
BUG=None
TEST=Built and booted on pit. Built and booted on nyan. In both cases,
verified that there were no error messages from the SPI drivers or the EC
code.
BRANCH=None
Original-Change-Id: I62a68820c632f154acece94f54276ddcd1442c09
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191192
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4fcfed280ad70f14a013d5353aa0bee0af540630)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id8824523abc7afcbc214845901628833e135d142
Reviewed-on: http://review.coreboot.org/7706
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Provide ASL to support the AUX port (a.k.a Mouse) found at
0x60,0x64 irq 12 on this EC.
Change-Id: I6969ae4d492570136a8e14e42509638857e1ed85
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7650
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
There were instances of unneeded arch/hlt.h includes,
various hlt() calls that weren't supposed to exit (but
might have) and various forms of endless loops around
hlt() calls.
All these are sorted out now: unnecessary includes are
dropped, hlt() is uniformly replaced with halt() (except
in assembly, obviously).
Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7608
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The in source comment:
/* This function avoids an error on serial console. */
refers to the resource allocator needing to find a non-NULL
function pointer else complaints of "... missing read_resources"
will be spewed.
Unfortunately/fortunately (depending on the time of day) compiler
optimisers have gotten a bit better at optimising away no-op functions
leading to the very message these stubs attempted to avoid. By using
the DEVICE_NOOP formalism that is static inlined 'suggests' (not enforces)
to the compiler to keep these symbols around.
Change-Id: I182019627b6954a4020f9f70e9c829ce3135f63c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7598
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Id88bb4367d6045f6fbf185f0562ac72c04ee5f84
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: http://review.coreboot.org/7146
Tested-by: build bot (Jenkins)
|
|
The DPTF charger particpant device needs to be notified when the
AC state changes so it can re-evaluate the PPCC object and apply
the proper charge rate limit if necessary.
Change-Id: I6723754e2fe12862f50709875140fcadcddb18eb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/189029
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Brad Geltz <brad.geltz@intel.com>
(cherry picked from commit ed1ee577014421b021e8814edc91a1b696bf9eed)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6951
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Update the ec_commands header (direct from EC source) and
add support for the new charger current limit interface
which will be used by DPTF.
Change-Id: Ia9a2a84b612a2982dbe996f07a856be6cd53ebdb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/185758
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 1fcca2d75856ecefd3aeb1c551182aa76d649466)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6925
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Fixes "Discharge rate invalid message" and fwts error.
Change-Id: I51f9d819f164552567d75f83c95ba7523e97343e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6793
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
OEM strings should not be handled by mobo code but by common code with strings
collected from all devices.
Change-Id: Ibde61a1ca79845670bc0df87dc6c67fa868d48a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6788
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I9998b0b4a1413ab65f1dbdf59b2f84d331ce9c3d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6790
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I9fd7f894d0e611f61e8702e4eacb12d7b81154d8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6789
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
_QXX numbers are determined experimentally, hotkey scancodes from thinkpad-acpi
module.
Change-Id: I1f7548ef62529ae25dcdcbed0fc74390b7529a2e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6765
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I655536f64faaa7e1600d4fec62ba80730e2cc45a
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6674
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
It's the third minipcie slot in x200.
Change-Id: Ibfa8d787698cd23b4abcffe5cff2d62039cf0f86
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6641
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch renames the x86 way of doing things to
explicitly mention CMOS (which is not available on
our ARM platforms) and adds an implementation to
get VBNV through the Chrome EC. We might want to
refine this further in the future to allow VBNV
in the EC even on x86 platforms. Will be fixed when
that appears. Also, not all ARM platforms running
ChromeOS might use the Google EC in the future, in
which case this code will need additional work.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Ice09d0e277dbb131f9ad763e762e8877007db901
Reviewed-on: https://chromium-review.googlesource.com/167540
Reviewed-by: David Hendrix <dhendrix@chromium.org>
Tested-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 8df6cdbcacb082af88c069ef8b542b44ff21d97a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6616
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
It's not really used.
Change-Id: I760d5a4cbe46d17ef37ea34e29eecdb0721cb945
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6588
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Currently the workaround for indicating a "full" battery kicks
in at 3%, but this turns out to be too high for some devices.
So move the workaround start point to 6% from full, or 94%.
Change-Id: Ib4305df3a68e89f3a10a096d0e89d8105ea9037b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169549
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 982dc496a0553c90dee56fda6411b7c21a5d7da9)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6521
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The EC recently added events for Thermal and Battery shutdown
to provide some sort of notification to the OS that it is
about to pull power.
Original-Change-Id: Ibbdb5f11b8fa9fc80612a3cc10667c612420b1bb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167301
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Duncan Laurie <dlaurie@google.com>
(cherry picked from commit 03a53ed5e58caa018d49df193510d95bdf5bed7b)
Change-Id: I0cdf89a60b541840029db58d49921340e7ab60eb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167314
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 16d00848f48da83f6d6c813137a35af45bb05c4b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6458
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This makes S3 work.
Change-Id: Ife14372f5f9bb151d7e6e98c6069eb99d5369baf
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6392
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Fixed spelling and added empty lines to separate the help
from the text automatically added during make menuconfig.
Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6313
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Whenever spi_xfer is called and whenver it's implemented, the natural unit for
the amount of data being transfered is bytes. The API expected things to be
expressed in bits, however, which led to a lot of multiplying and dividing by
eight, and checkes to make sure things were multiples of eight. All of that
can now be removed.
BUG=None
TEST=Built and booted on link, falco, peach_pit and nyan and looked for SPI
errors in the firmware log. Built for rambi.
BRANCH=None
Change-Id: I02365bdb6960a35def7be7a0cd1aa0a2cc09392f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192049
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6175
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The spi_flash_probe and and spi_setup_slave functions each took a max_hz
parameter and a spi_mode parameter which were never used.
BUG=None
TEST=Built for link, falco, rambi, nyan.
BRANCH=None
Change-Id: I3a2e0a9ab530bcc0f722f81f00e8c7bd1f6d2a22
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192046
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6174
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Comment #endif /* FOO */ pairings.
Alphabetise headers and remove any #if CONFIG_ guards around them.
Background rational:
Remove guarding the inclusion of headers based on CONFIG_ options. This
*potentially* could hide issues such as functions being swapped from
under our feet, since different runtime behaviour could be declared with
the same function same name and type-signature. Hence, depending on the
header we happen to get may change runtime behaviour.
Change-Id: Ic61bdfb64d99f0e2998c6451ae6686915b7bb3d4
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6059
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
It's helpful to have a generic function that will tell
the EC to reboot if the EC isn't running a specified
image. Add that and implement google_chromeec_early_init()
to utilize the new function still maintaing its semantics
of if recvoery mode is enabled the EC should be running its
RO image. There is a slight change in that no communication
is done with the EC if not in recovery mode.
BUG=chrome-os-partner:24133
BRANCH=rambi,squawks
TEST=Built and boot with recovery request. Noted EC reboot.
Change-Id: I22240f6a11231e39c33fd79796a52ec76b119397
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182060
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5039
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The PATx methods will be passed a temperature in deci-kelvin,
so it needs to be converted back to kelvin before being sent
to the EC.
The PAT disable method is changed to take the temperature ID
as an argument so individual sensors can be disabled.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, load esif_lf kernel drivers and
esif_uf userspace application. Start and stop DPTF and see
that temperature thresholds are set to sane values.
Change-Id: Ieeff5a5d2d833042923c059caf3e5abaf392da95
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182023
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5036
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When an EC thermal event occurs call the DPTF thermal threshold
event handler to handle notifications.
Change-Id: Ica928790bb478fccf8a46afef4eb7800589518b2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5726
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The EC now supports two auxiliary programmable trip points for
thermal monitoring. These are expected to be used by DPTF and
need to be exported.
In order to support these the header was updated from the latest
chrome ec source.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi
Change-Id: I257d910daac4e36280c0cecf4129381a32ffcb9a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181661
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5027
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I7d0e8d2119a470428cfc01c0738b8988ab75ba2d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5624
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
