summaryrefslogtreecommitdiff
path: root/src/include/device/path.h
AgeCommit message (Collapse)Author
2018-11-01src: Add missing include <stdint.h>Elyes HAOUAS
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-25device: Move find_dev_path() to device_const.cKyösti Mälkki
Change-Id: I8a27aa7157b5706623272ba9354ed8dff9b8184f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-11devicetree: Add USB device typeDuncan Laurie
This commit adds support for describing USB ports in devicetree.cb. It allows a USB port location to be described in the tree with configuration information, and ACPI code to be generated that provides this information to the OS. A new scan_usb_bus() is added that will scan bridges for devices so a tree of ports and hubs can be created. The device address is computed with a 'port type' and a 'port id' which is flexible for SOC to handle depending on their specific USB setup and allows USB2 and USB3 ports to be described separately. For example a board may have devices on two ports, one with a USB2 device and one with a USB3 device, both of which are connected to an xHCI controller with a root hub: xHCI | RootHub | | USB2[0] USB3[2] device pci 14.0 on chip drivers/usb/acpi register "name" = ""Root Hub"" device usb 0.0 on chip drivers/usb/acpi register "name" = ""USB 2.0 Port 0"" device usb 2.0 on end end chip drivers/usb/acpi register "name" = ""USB 3.0 Port 2"" device usb 3.2 on end end end end end Change-Id: I64e6eba503cdab49be393465b535e139a8c90ef4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/26169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-25sconfig: Add a new mmio resource typeJustin TerAvest
Add support for a mmio resource in the devicetree to allow memory-mapped IO addresses to be assigned to given values. AMD platforms perform a significant amount of configuration through these MMIO addresses, including I2C bus configuration. BUG=b:72121803 Change-Id: I5608721c22c1b229f527815b5f17fff3a080c3c8 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-12src/include: Open brace on same line as enum or structLee Leahy
Fix the following errors and warning detected by checkpatch.pl: ERROR: open brace '{' following enum go on the same line ERROR: open brace '{' following struct go on the same line ERROR: that open brace { should be on the previous line WARNING: missing space after struct definition TEST=Build and run on Galileo Gen2 Change-Id: I856235d0cc3a3e59376df52561b17b872b3416b2 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18653 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-09src/include: Fix unsigned warningsLee Leahy
Fix warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' BRANCH=none BUG=None TEST=Build and run on Galileo Gen2 Change-Id: I23d9b4b715aa74acc387db8fb8d3c73bd5cabfaa Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18607 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-16device: Add a new "SPI" device typeFurquan Shaikh
Add support for a new "SPI" device type in the devicetree to bind a device on the SPI bus. Allow device to provide chip select number for the device as a parameter. Add spi_bus_operations with operation dev_to_bus which allows SoCs to define a translation method for converting "struct device" into a unique SPI bus number. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully. Change-Id: I86f09516d3cddd619fef23a4659c9e4eadbcf3fa Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18340 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-05-16sconfig: Add a new generic device typeDuncan Laurie
Add support for a basic generic device in the devicetree to bind to a device that does not have a specific bus, but may need to be described in tables for the operating system. For instance some chips may have various GPIO connections that need described but do not fall under any other device. In order to support this export the basic 'scan_static_bus()' that can be used in a device_operations->scan_bus() method to scan for the generic devices. It has been possible to get a semi-generic device by using a fake PNP device, but that isn't really appropriate for many devices. Also Re-generate the shipped files for sconfig. Use flex 2.6.0 to avoid everything being rewritten. Clean up the local paths that leak into the generated configs. Change-Id: If45a5b18825bdb2cf1e4ba4297ee426cbd1678e3 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14789 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-05-16sconfig: Add 10bit addressing mode to i2c device typeDuncan Laurie
Use the second token for an i2c device entry in devicetree.cb to indicate if it should use 10-bit addressing or 7-bit. The default if not provided is to use 7-bit addressing, but it can be changed to 10-bit addressing with the ".1" suffix. For example: chip drivers/i2c/generic device i2c 3a.1 on end end Change-Id: I1d81a7e154fbc040def4d99ad07966fac242a472 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/14788 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-18device: Add device path display supportLee Leahy
Add an optional routine to translate the device path types into a string for display. TEST=Build and run on Galileo Change-Id: Iea5d0a2430d9a8546105324e2beda0955210dca9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-08-27AMD northbridges: factor out CPU allocationKyösti Mälkki
Factor CPU allocation out of AMD northbridge codes. As CPU topology information is required for generation of certain ACPI tables, make this code globally available. For AMDK8 and AMDFAM10 northbridge, there is a possible case of BSP CPU with lapicid!=0. We do not want to leave the lapic 0 from devicetree unused, so always use that node for BSP CPU. Change-Id: I8b1e73ed5b20b314f71dfd69a7b781ac05aea120 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1418 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-07-31Revert "Use broadcast SIPI to startup siblings"Sven Schnelle
This reverts commit 042c1461fb777e583e5de48edf9326e47ee5595f. It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I7dd1cba5a4c1e4b0af366b20e8263b1f6f4b9714 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1381 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-13MPTAPLE: generate from devicetree.cbSven Schnelle
This patch adds support for autogenerating the MPTABLE from devicetree.cb. This is done by a write_smp_table() declared weak in mpspec.c. If the mainboard doesn't provide it's own function, this generic implementation is called. Syntax in devicetree.cb: ioapic_irq <APICID> <INTA|INTB|INTC|INTD> <INTPIN> The ioapic_irq directive can be used in pci and pci_domain devices. If there's no directive, the autogen code traverses the tree back to the pci_domain and stops at the first device which such a directive, and use that information to generate the entry according to PCI IRQ routing rules. Change-Id: I4df5b198e8430f939d477c14c798414e398a2027 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1138 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-02Use broadcast SIPI to startup siblingsSven Schnelle
The current code for initializing AP cpus has several shortcomings: - it assumes APIC IDs are sequential - it uses only the BSP for determining the AP count, which is bad if there's more than one physical CPU, and CPUs are of different type Note that the new code call cpu->ops->init() in parallel, and therefore some CPU code needs to be changed to address that. One example are old Intel HT enabled CPUs which can't do microcode update in parallel. Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1139 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2009-02-28coreboot-v2: drop this ugly historic union name in v2 that was dropped in v3Stefan Reinauer
a long time ago. This will make it easier to port v2 boards forward to v3 at some point (and other things) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3964 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-11-26- Apply 11_24_a_s1_core.diff fromStefan Reinauer
https://openbios.org/roundup/linuxbios/issue24 - fix up for via epia-m git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2110 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2005-07-08eric patchYinghai Lu
1. x86_setup_mtrr take address bit. 2. generic ht, pcix, pcie beidge... 3. scan bus and reset_bus 4. ht read ctrl to decide if the ht chain is ready 5. Intel e7520 and e7525 support 6. new ich5r support 7. intel sb 6300 support. yhlu patch 1. split x86_setup_mtrrs to fixed and var 2. if (resource->flags & IORESOURCE_FIXED ) return; in device.c pick_largest_resource 3. in_conherent.c K8_SCAN_PCI_BUS git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-11-18- First stab at getting the ppc ports building and working.Eric Biederman
- The sandpointx3+altimus has been consolidated into one directory for now. - Added support for having different versions of the pci access functions on a per bus basis if needed. Hopefully I have not broken something inadvertently. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1786 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-10-16- First stab at running linuxbios without the old static device tree.Eric Biederman
Things are close but not quite there yet. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1681 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-10-16- Fix config.g and the hdama config so everthing builds again.Eric Biederman
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1680 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2004-10-14- First pass through with with device tree enhancement merge. Most of the ↵Eric Biederman
mechanisms should be in place but don't expect anything to quite work yet. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1662 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-10-11 - O2, enums, and switch statements work in romccEric Biederman
- Support for compiling romcc on non x86 platforms - new romc options -msse and -mmmx for specifying extra registers to use - Bug fixes to device the device disable/enable framework and an amd8111 implementation - Move the link specification to the chip specification instead of the path - Allow specifying devices with internal bridges. - Initial via epia support - Opteron errata fixes git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2003-09-02- Major update of the dynamic device tree so it can handleEric Biederman
* subtractive resources * merging with the static device tree * more device types than just pci - The piece to watch out for is the new enable_resources method that was needed in all of the drivers git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1096 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 12:56:26 +0000