summaryrefslogtreecommitdiff
path: root/src/include
AgeCommit message (Collapse)Author
2020-04-02Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator`Nico Huber
These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-31security/vboot: relocate and rename vboot_platform_is_resuming()Bill XIE
After measured boot is decoupled from verified boot in CB:35077, vboot_platform_is_resuming() is never vboot-specific, thus it is renamed to platform_is_resuming() and declared in bootmode.h. Change-Id: I29b5b88af0576c34c10cfbd99659a5cdc0c75842 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-31security/vboot: Decouple measured boot from verified bootBill XIE
Currently, those who want to use measured boot implemented within vboot should enable verified boot first, along with sections such as GBB and RW slots defined with manually written fmd files, even if they do not actually want to verify anything. As discussed in CB:34977, measured boot should be decoupled from verified boot and make them two fully independent options. Crypto routines necessary for measurement could be reused, and TPM and CRTM init should be done somewhere other than vboot_logic_executed() if verified boot is not enabled. In this revision, only TCPA log is initialized during bootblock. Before TPM gets set up, digests are not measured into tpm immediately, but cached in TCPA log, and measured into determined PCRs right after TPM is up. This change allows those who do not want to use the verified boot scheme implemented by vboot as well as its requirement of a more complex partition scheme designed for chromeos to make use of the measured boot functionality implemented within vboot library to measure the boot process. TODO: Measure MRC Cache somewhere, as MRC Cache has never resided in CBFS any more, so it cannot be covered by tspi_measure_cbfs_hook(). Change-Id: I1fb376b4a8b98baffaee4d574937797bba1f8aee Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-03-30memranges: Change align attribute to be log2 of required alignmentFurquan Shaikh
This change updates the align attribute of memranges to be represented as log2 of the required alignment. This makes it consistent with how alignment is stored in struct resource as well. Additionally, since memranges only allow power of 2 alignments, this change allows getting rid of checks at runtime and hence failure cases for non-power of 2 alignments. This change also updates the type of align to be unsigned char. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie4d3868cdff55b2c7908b9b3ccd5f30a5288e62f Reviewed-on: https://review.coreboot.org/c/coreboot/+/39810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-03-25create stdio.h and stdarg.h for {,v}snprintfJoel Kitching
Sometimes coreboot needs to compile external code (e.g. vboot_reference) using its own set of system header files. When these headers don't line up with C Standard Library, it causes problems. Create stdio.h and stdarg.h header files. Relocate snprintf into stdio.h and vsnprintf into stdarg.h from string.h. Chain include these header files from string.h, since coreboot doesn't care so much about the legacy POSIX location of these functions. Also move va_* definitions from vtxprintf.h into stdarg.h where they belong (in POSIX). Just use our own definitions regardless of GCC or LLVM. Add string.h header to a few C files which should have had it in the first place. BUG=b:124141368 TEST=make clean && make test-abuild BRANCH=none Change-Id: I7223cb96e745e11c82d4012c6671a51ced3297c2 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-25Rework map_oprom_vendev to add revision check and mappingMartin Roth
AMD's Family 17h SoCs share the same video device ID, but may need different video BIOSes. This adds the common code changes to check the vendor & device IDs along with the revision and select the correct video BIOS to use. Change-Id: I2978a5693c904ddb09d23715cb309c4a356e0370 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/2040455 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-03-25src/device: Add option to look at revision in option romsMartin Roth
AMD's Family 17h SOCs have the same vendor and device IDs for their graphics blocks, but need different video BIOSes. The only difference is the revision number. Add a Kconfig option that allows us to add the revision number of the graphics device to the PCI option rom saved in CBFS. Because searching CBFS takes a non-trivial amount of time, only enable the option if it's needed. If it's not used, or if nothing matches, the check will fall through and search for an option rom with no version. BUG=b:145817712 TEST=With surrounding patches, loads dali vbios Change-Id: Icb610a2abe7fcd0f4dc3716382b9853551240a7a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/2013181 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-03-22device/pci_id: Maintain consistent tab in pci_ids.hSubrata Banik
This patch converts inconsistent white space into tab. Change-Id: Ibc9d614eabbeb819bfff075e66b2277df4c070dc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-20sb/ibexpeak: Use macros instead of hard-coded IDsFelix Singer
This patch replaces hard-coded PCI IDs with macros from pci_ids.h and adds the related IDs to it. The resulting binary doesn't differ from the one without this patch. Used documents: - Intel 322170 Change-Id: I3326f142d483f5008fb2ac878f30c1a3a72f500f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner
2020-03-18assert.h: add assertions with descriptive failuresEric Peers
BUG=None TEST=tested in following patches on Trembyle board Change-Id: Ib30ccd41759e5a2a61d3182cc08ed5eb762eca98 Signed-off-by: Eric Peers <epeers@google.com> Reviewed-on: https://chromium-review.googlesource.com/1971443 Tested-by: Martin Roth <martinroth@chromium.org> Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-17src (minus soc and mainboard): Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I89b10076e0f4a4b3acd59160fb7abe349b228321 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39611 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17src/include/device: Add Intel Tiger Lake Thunderbolt device IdJohn Zhao
Tiger Lake Thunderbolt(TBT) has 4 PCIe root ports. Add those TBT root port devices Id from EDS #575683. BUG=None TEST=built image and booted to kernel successfully. Change-Id: Ia117d63daa15dfb21db28fd76723e97ab030da92 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39526 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17memrange: Add a helper function to determine if memranges is emptyFurquan Shaikh
This change adds a helper function memranges_is_empty() which returns true if there are no entries in memranges. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If841c42a9722cbc73ef321568928bc175bf88fd5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-17memrange: Add support for stealing required memory from given rangesFurquan Shaikh
This change adds memranges_steal() which allows the user to steal memory from the list of available ranges by providing a set of constraints (limit, size, alignment, tag). It tries to find the first big enough range that can satisfy the constraints, creates a hole as per the request and returns base of the stolen memory. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ibe9cfae18fc6101ab2e7e27233e45324c8117708 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-17memrange: Enable memranges to support different alignmentsFurquan Shaikh
This change enables memranges library to support addresses with different alignments. Before this change, memranges library supported aligning addresses to 4KiB only. Though this works for most cases, it might not be the right alignment for every use case. Example: There are some resource allocator changes coming up that require a different alignment when handling the range list. This change adds a align parameter to struct memranges that determines the alignment of all range lists in that memrange. In order to continue supporting current users of memranges, default alignment is maintained as 4KiB. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I1da0743ff89da734c9a0972e3c56d9f512b3d1e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-16drivers/intel/ish: Add TGL ISH PCI idli feng
BRANCH=none BUG=b:145946347 TEST==boot to OS with TGL RVP UP3 Signed-off-by: Hu, Hebo <hebo.hu@intel.com> Signed-off-by: li feng <li1.feng@intel.com> Change-Id: I3a4f73e82f62def3adb2cb1332a315366078c918 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39478 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15treewide: Replace uses of "Nehalem"Angel Pons
The code in coreboot is actually for the Arrandale processors, which are a MCM (Multi-Chip Module) with two different dies: - Hillel: 32nm Westmere dual-core CPU - Ironlake: 45nm northbridge with integrated graphics This has nothing to do with the older, single-die Nehalem processors. Therefore, replace the references to Nehalem with the correct names. Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15lib/spd_bin: Add LPDDR4X SPD information and DDR5, LPDDR5 IDsEric Lai
Follow JESD 21-C: DDR4 SPD Document Release 4 to add new DDR type. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I455c9e4c884ae74c72572be6dc2bd281a660e517 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-11prog_loaders: Remove CONFIG_MIRROR_PAYLOAD_TO_RAM_BEFORE_LOADINGJulius Werner
This option is not used on any platform and is not user-visible. It seems that it has not been used by anyone for a long time (maybe ever). Let's get rid of it to make future CBFS / program loader development simpler. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I2fa4d6d6f7c1d7a5ba552177b45e890b70008f36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-11cbfs: Remove unused functionsJulius Werner
cbfs_boot_load_stage_by_name() and cbfs_prog_stage_section() are no longer used. Remove them to make refactoring the rest of the CBFS API easier. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ie44a9507c4a03499b06cdf82d9bf9c02a8292d5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-07lib/spd_bin: Extend LPDDR4 SPD informationEric Lai
Follow JEDEC 21-C to extend LPDDR4 SPD information. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I68c9782c543afab4423296fa7ac1c078db5649c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-07cpu/x86/smm: Add smm_size to relocatable smmstubArthur Heymans
To mitigate against sinkhole in software which is required on pre-sandybridge hardware, the smm entry point needs to check if the LAPIC base is between smbase and smbase + smmsize. The size needs to be available early so add them to the relocatable module parameters. When the smmstub is used to relocate SMM the default SMM size 0x10000 is provided. On the permanent handler the size provided by get_smm_info() is used. Change-Id: I0df6e51bcba284350f1c849ef3d012860757544b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-04include/cpu/amd: Drop unused filesElyes HAOUAS
Change-Id: Iff14250e52854d598967cfd3cbc98061be06e581 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38055 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-02soc/intel/denverton: Move PCI IDs to pci_ids.hFelix Singer
This patch moves the PCI ID definitions to pci_ids.h file and replaces every occurrence with the new names. The resulting binary doesn't differ from the one without this patch. Used documents: - Intel 337018 Change-Id: Ib7d2aae78c8877f3c9287d03b20a5620db293445 Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-03-02soc/amd/picasso: Add PCI ID for Dali xHCIMarshall Dawson
soc//picasso is intended to be forward-compatible with the Dali APU, a Family 17h Models 20h-2Fh product. Add the one new device ID it has. See PPR document #55772 (still NDA only) for more information. Change-Id: I7e9b90bb00ae6f4a121f10b1467d2ca398ac860c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2020-02-25include/stdint.h: Remove old reference to ROMCCElyes HAOUAS
Change-Id: I00fdcee177c5d4b5e95bc3d0330fd8934eee2f0a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2020-02-25soc/intel/common: Update Jasper Lake Device IDsMeera Ravindranath
Update Jasper Lake CPU, SA and PCH IDs. BUG=b:149185282 BRANCH=None TEST=Compilation for Jasper Lake board is working Change-Id: I2c9ec1eb4236184b981d99250f263172c82f7117 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Varshit Pandya <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-02-21security/intel/stm: Check for processor STM supportEugene Myers
Check to ensure that dual monitor mode is supported on the current processor. Dual monitor mode is normally supported on any Intel x86 processor that has VTx support. The STM is a hypervisor that executes in SMM dual monitor mode. This check should fail only in the rare case were dual monitor mode is disabled. If the check fails, then the STM will not be initialized by coreboot. Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov> Change-Id: I518bb2aa1bdec94b5b6d5e991d7575257f3dc6e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-02-17soc/tigerlake: Add Device id for Tiger Lake Dual CoreSrinidhi N Kaushik
Add device id for Tiger Lake Dual core part. BUG=b:148965583 BRANCH=none TEST="emerge-tglrvp coreboot chromeos-bootimage", flash and boot Change-Id: Ied0cef2fcc8ae6f25949f98f886c4d79f64b54cd Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-02-17vboot: push clear recovery mode switch until BS_WRITE_TABLESJoel Kitching
Serves two purposes: (1) On some platforms, FSP initialization may cause a reboot. Push clearing the recovery mode switch until after FSP code runs, so that a manual recovery request (three-finger salute) will function correctly under this condition. (2) The recovery mode switch value is needed at BS_WRITE_TABLES for adding an event to elog. (Previously this was done by stashing the value in CBMEM_ID_EC_HOSTEVENT.) BUG=b:124141368, b:35576380 TEST=make clean && make test-abuild BRANCH=none Change-Id: I30c02787c620b937e5a50a5ed94ac906e3112dad Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-02-08Add configurable ramstage support for minimal PCI scanningRonald G. Minnich
This CL has changes that allow us to enable a configurable ramstage, and one change that allows us to minimize PCI scanning. Minimal scanning is a frequently requested feature. To enable it, we add two new variables to src/Kconfig CONFIGURABLE_RAMSTAGE is the overall variable controlling other options for minimizing the ramstage. MINIMAL_PCI_SCANNING is how we indicate we wish to enable minimal PCI scanning. Some devices must be scanned in all cases, such as 0:0.0. To indicate which devices we must scan, we add a new mandatory keyword to sconfig It is used in place of on, off, or hidden, and indicates a device is enabled and mandatory. Mandatory devices are always scanned. When MINIMAL_PCI_SCANNING is enabled, ONLY mandatory devices are scanned. We further add support in src/device/pci_device.c to manage both MINIMAL_PCI_SCANNING and mandatory devices. Finally, to show how this works in practice, we add mandatory keywords to 3 devices on the qemu-q35. TEST= 1. This is tested and working on the qemu-q35 target. 2. On CML-Hatch Before CL: Total Boot time: ~685ms After CL: Total Boot time: ~615ms Change-Id: I2073d9f8e9297c2b02530821ebb634ea2a5c758e Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2020-02-05security/intel/stm: Add STM supportEugene Myers
This update is a combination of all four of the patches so that the commit can be done without breaking parts of coreboot. This possible breakage is because of the cross-dependencies between the original separate patches would cause failure because of data structure changes. security/intel/stm This directory contains the functions that check and move the STM to the MSEG, create its page tables, and create the BIOS resource list. The STM page tables is a six page region located in the MSEG and are pointed to by the CR3 Offset field in the MSEG header. The initial page tables will identity map all memory between 0-4G. The STM starts in IA32e mode, which requires page tables to exist at startup. The BIOS resource list defines the resources that the SMI Handler is allowed to access. This includes the SMM memory area where the SMI handler resides and other resources such as I/O devices. The STM uses the BIOS resource list to restrict the SMI handler's accesses. The BIOS resource list is currently located in the same area as the SMI handler. This location is shown in the comment section before smm_load_module in smm_module_loader.c Note: The files within security/intel/stm come directly from their Tianocore counterparts. Unnecessary code has been removed and the remaining code has been converted to meet coreboot coding requirements. For more information see: SMI Transfer Monitor (STM) User Guide, Intel Corp., August 2015, Rev 1.0, can be found at firmware.intel.com include/cpu/x86: Addtions to include/cpu/x86 for STM support. cpu/x86: STM Set up - The STM needs to be loaded into the MSEG during BIOS initialization and the SMM Monitor Control MSR be set to indicate that an STM is in the system. cpu/x86/smm: SMI module loader modifications needed to set up the SMM descriptors used by the STM during its initialization Change-Id: If4adcd92c341162630ce1ec357ffcf8a135785ec Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: ron minnich <rminnich@gmail.com>
2020-02-05pciexp: Add support for allocating PCI express hotplug resourcesJeremy Soller
This change adds support for allocating resources for PCI express hotplug bridges when PCIEXP_HOTPLUG is selected. By default, this will add 32 PCI subordinate numbers (buses), 256 MiB of prefetchable memory, 8 MiB of non-prefetchable memory, and 8 KiB of I/O space to any device with the PCI_EXP_SLTCAP_HPC bit set in the PCI_EXP_SLTCAP register, which indicates hot-plugging capability. The resource allocation is configurable, please see the PCIEXP_HOTPLUG_* variables in src/device/Kconfig. In order to support the allocation of hotplugged PCI buses, a new field is added to struct device called hotplug_buses. This is defaulted to zero, but when set, it adds the hotplug_buses value to the subordinate value of the PCI bridge. This allows devices to be plugged in and unplugged after boot. This code was tested on the System76 Darter Pro (darp6). Before this change, there are not enough resources allocated to the Thunderbolt PCI bridge to allow plugging in new devices after boot. This can be worked around in the Linux kernel by passing a boot param such as: pci=assign-busses,hpbussize=32,realloc This change makes it possible to use Thunderbolt hotplugging without kernel parameters, and attempts to match closely what our motherboard manufacturer's firmware does by default. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I500191626584b83e6a8ae38417fd324b5e803afc Reviewed-on: https://review.coreboot.org/c/coreboot/+/35946 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28drivers/spi/spi_flash: remove spi flash namesAaron Durbin
The names of each spi flash cause quite a bit of bloat in the text size of each stage/program. Remove the name entirely from spi flash in order to reduce overhead. In order to pack space as closely as possible the previous 32-bit id and mask were split into 2 16-bit ids and masks. On Chrome OS build of Aleena there's a savings of >2.21KiB in each of verstage, romstage, and ramstage. Change-Id: Ie98f7e1c7d116c5d7b4bf78605f62fee89dee0a5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-01-28commonlib: Add commonlib/bsdJulius Werner
This patch creates a new commonlib/bsd subdirectory with a similar purpose to the existing commonlib, with the difference that all files under this subdirectory shall be licensed under the BSD-3-Clause license (or compatible permissive license). The goal is to allow more code to be shared with libpayload in the future. Initially, I'm going to move a few files there that have already been BSD-licensed in the existing commonlib. I am also exracting most contents of the often-needed <commonlib/helpers.h> as long as they have either been written by me (and are hereby relicensed) or have an existing equivalent in BSD-licensed libpayload code. I am also relicensing <commonlib/compression.h> (written by me) and <commonlib/compiler.h> (same stuff exists in libpayload). Finally, I am extracting the cb_err error code definitions from <types.h> into a new BSD-licensed header so that future commonlib/bsd code can build upon a common set of error values. I am making the assumption here that the enum constants and the half-sentence fragments of documentation next to them by themselves do not meet the threshold of copyrightability. Change-Id: I316cea70930f131e8e93d4218542ddb5ae4b63a2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-01-22soc/intel/common: Add Elkhartlake Device IDsTan, Lean Sheng
Add Elkhartlake CPU, SA and PCH IDs. EHL PCH is code named as MCC. Also add a MCH ID (JSL_EHL) which is shared by both JSL and EHL SKUs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I03f15832143bcc3095a3936c65fbc30a95e7f0f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38489 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/cannonlake/bootblock: Add CML-S 2/4-Core MCH IDsGaggery Tsai
This patch adds CML-S 2 and 4-Core MCH IDs and fix wrong ID for 10-Core ID. Change-Id: I30f6c8a5234b7754d984b598bf7bae103ec9712e Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-18src/include: Fix typosElyes HAOUAS
Change-Id: Ia8e6e5bd5ac2565263d81df8ca81d62436a3301f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-18cbfs: Remove locator conceptJulius Werner
When vboot was first integrated into CBFS it was still part of Google vendorcode. So to not directly tie custom vendorcode into the core CBFS library, the concept of cbfs_locator was introduced to decouple core code from an arbitrary amount of platform-specific implementations that want to decide where the CBFS can be found. Nowadays vboot is a core coreboot feature itself, and the locator concept isn't used by anything else anymore. This patch simplifies the code by removing it and just calling vboot from the CBFS library directly. That should make it easier to more closely integrate vboot into CBFS in the future. Change-Id: I7b9112adc7b53aa218c58b8cb5c85982dcc1dbc0 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-17drivers/spi/spi_flash: organize spi flash by sector topologyAaron Durbin
By grouping the spi flash parts by their {vendor, sector topology} tuple one can use a common probe function for looking up the part instead of having per-vendor probe functions. Additionally, by grouping by the command set one can save more space as well. SST is the exception that requires after_probe() function to unlock the parts. 2KiB of savings in each of verstage, romstage, and ramstage on Aleena Chrome OS Build. Change-Id: I9cc20ca0f3d0a1b97154b000c95ff2e7e87f3375 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-01-17drivers/spi/spi_flash: introduce common spi_flash_part_id objectAaron Durbin
To further drive to a common approach for describing the spi flash parts in the drivers add spi_flash_part_id object. All the drivers are updated to utilize the new object. Additionally, the driver_private is also not needed in the spi_flash object. A Chrome OS build of Aleena provides 960 byte saving of text. A subsequent patch will save more memory. Change-Id: I9c0cc75f188ac004ab647805b9551bf06a0c646b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-01-16drivers/spi/spi_flash: separate out protection opsAaron Durbin
Put the write protection into its own object. This allows for easier future reuse of objects in future consolidation patches. It's also possible to eliminate the code implmementing these in the future if the platform doesn't require it. For now leave current behavior as-is. The names of the callbacks were shortened as they are now in the spi_flash_protection_ops object which is a new field in the spi_flash object. Change-Id: I2fec4e4430709fcf3e08a55dd36583211c035c08 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-14sb/intel/common: Declare common smbus_base() and enable_smbus()Kyösti Mälkki
This avoids including platform-specific headers with different filenames from common code. Change-Id: Idf9893e55949d63f3ceca2249e618d0f81320321 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-14drivers/pc80/rtc: Clean up some POST_CODE_EXTRA useKyösti Mälkki
Change-Id: I5ecfa0860a28547f76a72592a8d07bca67822217 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38188 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-14console/post: Split parts to arch/Kyösti Mälkki
Both IO port and cmos are currently arch/x86 only features. Change-Id: I010af3f645c0be38dd856657874c36103aebbdc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38187 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-10console/post: Move cmos_post_code() under pc80/rtcKyösti Mälkki
We should keep console/ somewhat arch-agnostic. Change-Id: I4465888023ba5ae0706b5e98e541c40f975d11e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38186 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-10drivers/pc80/rtc: Move sanitize_cmos()Kyösti Mälkki
Implementation depends on USE_OPTION_TABLE. Change-Id: If7f8f478db3214842b6cc60cd77b4ea81cab6e3a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38195 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-10drivers/spi/spi_flash: explicitly handle STMicro deep power stateAaron Durbin
In order to provide more consistent probing in future refactorings, pull out the release from deep sleep path in STMicro's SPI flash probing function. Call that function explicitly when RDID doesn't return anything at all. The old STMicro parts, even if supporting RDID, won't decode that instruction while in a deep power down state. Instead of re-issuing RDID after the successful wake assume the id fixup is valid. Change-Id: I46c47abcfb1376c1c3ce772f6f232857b8c54202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-09sb/intel/common: Add smbus_set_slave_addr()Kyösti Mälkki
Change-Id: I7dddb61fab00e0f4f67d4eebee0cfe8dcd99f4ab Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38230 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-09sb/intel/common: Add smbus_host_reset()Kyösti Mälkki
Change-Id: I3f6000df391295e2c0ce910a2a919a1dd3333519 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>