summaryrefslogtreecommitdiff
path: root/src/include
AgeCommit message (Collapse)Author
2021-03-15mb/ocp/deltalake: Override SMBIOS type 2 feature flagsTim Chu
Override SMBIOS type 2 board feature flags. For Delta Lake, board is replaceable and is a hosting board. Tested=Execute "dmidecode -t 2" to check info is correct. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I4469360ec51369dbf8179b3cbac0519ead7f0382 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2021-03-15pciexp_device: Rewrite LTR configurationNico Huber
I was bugged by spurious "Failed to enable LTR" messages for years. Looking at the the current algorithm, it is flawed in multiple ways: * It looks like the author didn't know they implemented a recursive algorithm (pciexp_enable_ltr()) inside another recursive algorithm (pciexp_scan_bridge()). Thus, at every tree level, everything is run again for the whole sub- tree. * LTR is enabled no matter if `.set_ltr_max_latencies` is implemented or not. Leaving the endpoints' LTR settings at 0: They are told to always report zero tolerance. In theory, depending on the root-complex implementation, this may result in higher power consumption than without LTR messages. * `.set_ltr_max_latencies` is only considered for the direct parent of a device. Thus, even with it implemented, an endpoint below a (non-root) bridge may suffer from the 0 settings as described above. * Due to the double-recursive nature, LTR is enabled starting with the endpoints, then moving up the tree, while the PCIe spec tells us to do it in the exact opposite order. With the current implementation of pciexp_scan_bridge(), it is hard to hook anything in that runs for each device from top to bottom. So the proposed solution still adds some redundancy: First, for every device that uses pciexp_scan_bus(), we enable LTR if possible (see below). Then, when returning from the bus- scanning recursion, we enable LTR for every device and configure the maximum latencies (if supported). The latter runs again on all bridges, because it's hard to know if pciexp_scan_bus() was used for them. When to enable LTR: * For all devices that implement `.set_ltr_max_latencies`. * For all devices below a bridge that has it enabled already. Change-Id: I2c5b8658f1fc8cec15e8b0824464c6fc9bee7e0e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51328 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-14device/pciexp_device.c: Remove CPP guardingArthur Heymans
Let the linker do its job. This fixes building with !CONFIG_PCIEXP_HOTPLUG on some platforms. Change-Id: I46560722dcb5f1d902709e40b714ef092515b164 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-12pci_def.h: Introduce PCI_EXP_DEVCAP2 & PCI_EXP_DEVCTL2 properNico Huber
Replace the existing, odd looking, unordered definitions used for LTR configuration with the usual names used by upstream libpci. TEST=Built google/brya0 with BUILD_TIMELESS=1: no changes. Fixes: Code looked like UEFI copy-pasta. Header file was a mess. Change-Id: Icf666692e22730e1bdf4bcdada433b3219af568a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51327 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12device: Give `pci_ops.set_L1_ss_latency` a proper nameNico Huber
Rename `set_L1_ss_latency` to what it does: `set_ltr_max_latencies`. TEST=Built google/brya0 with BUILD_TIMELESS=1: no changes. Change-Id: I7008aa18bf80d6709dce1b2d3bfbb5ea407a0574 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51326 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12cpu/intel/microcode: Fix caching logic in intel_microcode_findFurquan Shaikh
CB:49896 added support in `intel_microcode_find()` to cache the found microcode for faster subsequent accesses. This works okay when the function succeeds in finding the microcode on BSP. However, if for any reason, `cpu_microcode_blob.bin` does not contain a valid microcode for the given processor, then the logic ends up attempting to find microcode again and again every time it is called (because `ucode_updates` is set to NULL on failed find, thus retriggering the whole find sequence every time). This leads to a weird race condition when multiple APs are running in parallel and executing this function. A snippet of the issues observed in the scenario described above: ``` ... microcode: Update skipped, already up-to-date ... Microcode header corrupted! ... ``` 1. AP reports that microcode update is being skipped since the current version matches the version in CBFS (even though there is no matching microcode update in CBFS). 2. AP reports microcode header is corrupted because it thinks that the data size reported in the microcode is larger than the file read from CBFS. Above issues occur because each time an AP calls `intel_microcode_find()`, it might end up seeing some intermittent state of `ucode_updates` and taking incorrect action. This change fixes this race condition by separating the logic for finding microcode into an internal function `find_cbfs_microcode()` and maintaining the caching logic in `intel_microcode_find()` using a boolean flag `microcode_checked`. BUG=b:182232187 TEST=Verified that `intel_microcode_find()` no longer makes repeated attempts to find microcode from CBFS if it failed the first time. Change-Id: I8600c830ba029e5cb9c0d7e0f1af18d87c61ad3a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51371 Reviewed-by: Patrick Rudolph Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-12soc/intel/*: drop UART pad configuration from common codeMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Since all boards do pad setup on their own now, finally drop the pad configuration from SoC common code. Change-Id: Id03719eb8bd0414083148471ed05dea62a895126 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao
2021-03-11src/cpu/x86: Add helper mp_run_on_all_apsAamir Bohra
Add a helper function mp_run_on_all_aps, it allows running a given func on all APs excluding the BSP, with an added provision to run func in serial manner per AP. BUG=b:169114674 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I74ee8168eb6380e346590f2575350e0a6b73856e Reviewed-on: https://review.coreboot.org/c/coreboot/+/51271 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-11soc/intel/common/block: Add PCI IDs for EmmitsBurg PCHJonathan Zhang
According to Intel EmmitsBurg EDS, doc# 606161: * Add PCI devid for SPI. * Add PCI devid for ESPI (LPC). EmmitsBurg (EBG) PCH is used in the chipset with Sapphire Rapids Scalable Processor (SPR-SP). Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ie8925cb739c95c34febf9002149de437d19c8234 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-03-08cbfs: Add cbfs_alloc() primitive and combine cbfs_load() and cbfs_map()Julius Werner
This patchs adds a new CBFS primitive that allows callers to pass in an allocator function that will be called once the size of the file to load is known, to decide on its final location. This can be useful for loading a CBFS file straight into CBMEM, for example. The new primitive is combined with cbfs_map() and cbfs_load() into a single underlying function that can handle all operations, to reduce the amount of code that needs to be duplicated (especially later when file verification is added). Also add a new variation that allows restraining or querying the CBFS type of a file as it is being loaded, and reorganize the documentation/definition of all these accessors and variations in the header file a little. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I5fe0645387c0e9053ad5c15744437940fc904392 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-03-08cbfs: Pull handling of the CBFS_CACHE mem_pool into CBFS coreJulius Werner
This patch pulls control of the memory pool serving allocations from the CBFS_CACHE memlayout area into cbfs.c and makes it a core part of the CBFS API. Previously, platforms would independently instantiate this as part of boot_device_ro() (mostly through cbfs_spi.c). The new cbfs_cache pool is exported as a global so these platforms can still use it to directly back rdev_mmap() on their boot device, but the cbfs_cache can now also use it to directly make allocations itself. This is used to allow transparent decompression support in cbfs_map(). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I0d52b6a8f582a81a19fd0fd663bb89eab55a49d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-03-08cbfs: Move trivial wrappers to static inlinesJulius Werner
The new CBFS API contains a couple of trivial wrappers that all just call the same base functions with slightly different predetermined arguments, and I'm planning to add several more of them as well. This patch changes these functions to become static inlines, and reorganizes the cbfs.h header a bit for better readability while I'm at it. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If0170401b2a70c158691b6eb56c7e312553afad1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-03-08cbfs: Reflow cbfs.c and cbfs.h to 96-character line lengthsJulius Werner
Doing this all in one go keeps the files consistent and should make future refactoring easier. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I4a701d24fc9ccd68dce8789aab15fd21964a55f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49330 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-05soc/intel/broadwell/pch: Use Lynx Point smbus.cAngel Pons
Continue unifying Lynx Point and Wildcat Point (PCH for Broadwell) code. Define the WPT-LP SMBus PCI device ID, add it to smbus.c of Lynx Point, and drop all now-unnecessary SMBus code from Broadwell. Change-Id: I864d7c2dd47895a3c559e2f1219425cda9fd0c17 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-03-01acpi: Move PCI functions to separate fileTim Wawrzynczak
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Idc96b99da9f9037267c0bec2c839014b13ceb8cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/51106 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01mb/ocp/deltalake: Fill ECC type in romstageAngel Pons
Fill the ECC type in `struct memory_info` in romstage, and in SoC code. The SMBIOS override is unnecessary, and this is not mainboard-specific. Change-Id: I8370b3ee7d75914b895946b53923598adf87b522 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50179 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01memory_info.h: Store SMBIOS error correction typeAngel Pons
There are platforms that support error correction types other than single-bit ECC. Extend meminfo to accomodate additional ECC types. It is assumed that `struct memory_info` is packed to save space. Thus, use `uint8_t` instead of an enum type (which are usually 4 bytes wide). Change-Id: I863f8e34c84841d931dfb8d7067af0f12a437e36 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50178 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-27drivers/soundwire/alc1308 : Add ALC1308 soundwire deviceAnil Kumar
This patch adds new soundwire device ALC1308 The codec properties are filled out as best as possible with the datasheet as a reference. The ACPI address for the codec is calculated with the information in the codec driver combined with the devicetree.cb hierarchy where the link and unique IDs are extracted from the device path. The unique ID is calculated from schematics by referring to ASEL[1:0] strap settings. Datasheet of ALC1308 provides info about the mapping of ASEL strap settings to unique ID For example this device is connected to master link ID 1 and has strap settings configuring it for unique ID 2. chip drivers/soundwire/alc1308 register "desc" = ""Left Speaker"" device generic 1.2 on end end Bug=None Test=Build and boot on TGLRVP.Extract SSDT and confirm that the entries for PCI0.HDAS.SNDW are present for ALC1308 Test speaker out functionality Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: Ibf3f1d5c6881cbd106e96ad1ff17ca216aa272ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/51042 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Sathyanarayana Nujella Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-27arch/x86/smbios: Update SMBIOS type 17 asset tagTim Chu
Add SMBIOS type 17 asset tag. Use dimm locator as default value. Tested=Execute "dmidecode -t 17" to check asset tag field is correct. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I323e6b4cf6b11ede253d5a2a4bfc976a3f432b05 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-27sb/intel/ibexpeak: Add all PCI IDs for LPCAngel Pons
Taken from document 322170-028 (5 series specification update). Tested on out-of-tree HP ProBook 6550b (HM57), fixes several issues. Without this patch, EHCI controllers had no IRQ assigned and there were unexpected exceptions about NMIs. With this patch, the issues are gone. Change-Id: Icd31dd89ba49e38a5e4c108a8361dbf636332ab8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51066 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-24soc/amd/picasso/data_fabric: add missing data fabric device function 7Felix Held
The device function is missing in the PCI device table in the PPR, but is present in the hardware. Verified on a Mandolin board with PCO APU. The corresponding ticket for the PPR is DESPCSOC-6667. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie91438bc905691d443ca4e7841549d1e3bca39ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/51041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-24device/device.c: Rename .disable to .vga_disableArthur Heymans
This makes it clear what this function pointer is used for. Change-Id: I2090e164edee513e05a9409d6c7d18c2cdeb8662 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51009 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-19include/cpu/amd/msr: rename MSR_PSP_ADDR to PSP_ADDR_MSRFelix Held
The new name is more consistent with the rest of the MSR definitions. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5666d9837c61881639b5f292553a728e49c5ceb2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50855 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-19soc/amd/common/amdblocks/psp: move MSR_PSP_ADDR to include/cpu/amd/msr.hFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5bd6f74bc0fbe461fa01d3baa63612eaec77b97a Reviewed-on: https://review.coreboot.org/c/coreboot/+/50854 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-19memlayout: Store region sizes as separate symbolsJulius Werner
This patch changes the memlayout macro infrastructure so that the size of a region "xxx" (i.e. the distance between the symbols _xxx and _exxx) is stored in a separate _xxx_size symbol. This has the advantage that region sizes can be used inside static initializers, and also saves an extra subtraction at runtime. Since linker symbols can only be treated as addresses (not as raw integers) by C, retain the REGION_SIZE() accessor macro to hide the necessary typecast. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ifd89708ca9bd3937d0db7308959231106a6aa373 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-02-18rmodtool: Make memlayout symbols absolute and do not relocate themJulius Werner
Memlayout is a mechanism to define memory areas outside the normal program segment constructed by the linker. Therefore, it generally doesn't make sense to relocate memlayout symbols when the program is relocated. They tend to refer to things that are always in one specific spot, independent of where the program is loaded. This hasn't really hurt us in the past because the use case we have for rmodules (ramstage on x86) just happens to not really need to refer to any memlayout-defined areas at the moment. But that use case may come up in the future so it's still worth fixing. This patch declares all memlayout-defined symbols as ABSOLUTE() in the linker, which is then reflected in the symbol table of the generated ELF. We can then use that distinction to have rmodtool skip them when generating the relocation table for an rmodule. (Also rearrange rmodtool a little to make the primary string table more easily accessible to the rest of the code, so we can refer to symbol names in debug output.) A similar problem can come up with userspace unit tests, but we cannot modify the userspace relocation toolchain (and for unfortunate historical reasons, it tries to relocate even absolute symbols). We'll just disable PIC and make those binaries fully static to avoid that issue. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ic51d9add3dc463495282b365c1b6d4a9bf11dbf2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-02-16device/dram: Move SPD manufacturer names out of arch/x86Patrick Rudolph
Move SPD manufacturer ID decoding to device/dram. Will be used by the following patch outside of SMBIOS scope as well. Change-Id: Iec175cd6ab1d20761da955785e4bc0e87ae02dbb Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-16ACPI: Add acpi_reset_gnvs_for_wake()Kyösti Mälkki
With chipset_power_state filled in romstage CBMEM hooks and GNVS allocated early in ramstage, GNVS wake source is now also filled for normal boot path. Change-Id: I2d44770392d14d2d6e22cc98df9d1751c8717ff3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-13include/acpi/acpi.h: Add ACPI_MADT_LAPIC_NMI_ALL_PROCESSORSRaul E Rangel
This is a magic value that means all processors. See Table 5-52 Local APIC NMI Structure in ACPI Spec 6.3. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic2fc060fda21bec44258bcae62ddb230be542759 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-11cpu/intel/microcode: Fix typo in function parameterElyes HAOUAS
Change-Id: I9b03105a6808a67c2101917e1822729407271627 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-02-10device/azalia_device: Add mainboard hook to program codecsAngel Pons
On some mainboards, codec configuration depends on settings that are only known at runtime, which is impossible to specify using one verb table. Add an optional `mainboard_azalia_program_runtime_verbs` hook where mainboards can program runtime-dependent codec verbs. Change-Id: I7efeba5c26051aeb5061cce191ace08c304a6c70 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-10device/azalia_device: Add function to program a verb tableAngel Pons
On some boards, Azalia configuration depends on config settings that are not known at compile-time. Expose a function to program a verb table, to be used in subsequent commits. Change-Id: Ie9607f6e733df66f0ca26a4bb70e0864ce1d4512 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-02-09src: Add missing <cbmem.h>Elyes HAOUAS
Change-Id: I75a816c594b326df8a4aa5458bb055fca35e1741 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-02-09drivers/intel/fsp1_1,fsp2_0: Refactor logo displayKyösti Mälkki
Hide the detail of allocation from cbmem from the FSP. Loading of a BMP logo file from CBFS is not tied to FSP version and we do not need two copies of the code, move it under lib/. Change-Id: I909f2771af534993cf8ba99ff0acd0bbd2c78f04 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-06drivers/intel/fsp2_0: Add support for MP services2 PPIAamir Bohra
Add support for MP services2 PPIs, which is slight modification over MP services 1 PPIs. A new API StartupAllCPUs have been added to allow running a task on BSP and all APs. Also the EFI_PEI_SERVICES parameter has been removed from all MP PPI APIs. This implementation also selects the respective MP services PPI version supported for SoCs BUG=b:169196864 Change-Id: Id74baf17fb90147d229c78be90268fdc3ec1badc Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-02-04drivers/generic/bayhub_lv2: Add driver for BayHub lv2John Su
Add a driver which puts the device into power-saving mode. BUG=b:177955523 BRANCH=zork TEST=boot and see this message: BayHub LV2: Power-saving enabled 110102 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Idc1340b1a6fe7063d16c8ea16488d6e2b8b308cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/49783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-04acpi: Add support for reporting CrashLog in BERT tableFrancois Toguo
Crash Data are collected and sent to the OS via the ACPI BERT. BUG=None TEST=Built, and BERT successfully generated in the crashLog flow. Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com> Change-Id: I00e390d735d61beac2e89a726e39119d9b06b3df Signed-off-by: Nikunj A. Dadhania <nikunj.dadhania@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-04coreboot_table: Move VBOOT_VBNV supportKyösti Mälkki
The guard changes from (CHROMEOS && PC80_SYSTEM) to VBOOT_VBNV_CMOS here. Change-Id: I653285c04e864aa6a3494ba1400787fa184ba187 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-02-03pci_ids/intel: Add missing CFL-S GT1 IGD IDsNico Huber
Change-Id: I372b6b2d602dfe116d5791bb6a6653454523b42b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Timofey Komarov <happycorsair@yandex.ru>
2021-02-03pci_ids/intel: Correct 0x3e96, it's a CFL-S partNico Huber
Change-Id: Ibdddb3309f862f52c578e91ba3dc310dff8f70bc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Timofey Komarov <happycorsair@yandex.ru> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-01include/device/pci_ids.h: Add Cannon Lake PCH-H SATA dev IDErik van den Bogaert
Add SATA controller ID for Cannon Lake PCH-H Mobile HALO (see document number: 571182) Add SPDX license header Bug=N/A TEST=Build of Intel Coffeelake H SO-DIMM DDR4 RVP11 successfully completed Change-Id: Ic7e6ace2a24b4278b04caa58be907d38f4d117cd Signed-off-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-02-01console/console.h: Move get_console_loglevel() declarationArthur Heymans
If for a stage __CONSOLE_ENABLE__ is 0, then there would be no prototype for a get_console_loglevel() definition. Change-Id: I805078921a5cc1506685f8aada3af5c5241260b7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50083 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-01arch/x86/smbios: Add Number Of Power Cords field to be overridenJingleHsuWiwynn
For SMBIOS type 3, add function to override number of power cords Tested=Exectute dmidecode -t 3 to verify. Signed-off-by: JingleHsuWiwynn <jingle_hsu@wiwynn.com> Change-Id: I7dee3a944a49ffcfdc2f4408d92a17aa39761bb0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-30device: Drop `mmconf_resource_init` functionAngel Pons
All uses of `mmconf_resource_init` have been replaced in previous patches with `mmconf_resource`, which uses Kconfig symbol values. Change-Id: I4473268016ed511aa5c4930a71977e722e34162a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-01-30device/Kconfig: Introduce MMCONF_LENGTHAngel Pons
This is necessary because ASL Memory32Fixed values cannot contain operations, even if they can be evaluated to constants. Add a sanity check in pci_mmio_cfg.h to ensure consistency with MMCONF_BUS_NUMBER. Change-Id: I8f0b5edf166580cc12c1363d8d6b6ef0f2854be9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50033 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-29stage_cache: Add resume_from_stage_cache()Kyösti Mälkki
Factor out the condition when an attempt to load stage from cache can be tried. Change-Id: I936f07bed6fc82f46118d217f1fd233e2e041405 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-28cpu/intel/microcode: Add caching layer in intel_microcode_findPatrick Rudolph
Cache the found microcode for faster subsequent accesses. Change-Id: Ic40d57964600f8f20ddb26c7d1691b043fd89f29 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49896 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-28arch/x86/smbios: Update SMBIOS type 16 Extended Maximum CapacityTim Chu
Update Extended Maximum Capacity field in SMBIOS type 16 so that maximum dimm size can be over 2TB. Tested=Execute "dmidecode -t 16" to check maximum capacity is over 2TB. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I61901c815f9d0daae102e5077a116c0de87240ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/49828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-01-28acpi/acpigen.c: Remove unused and incorrect functionsJakub Czapiga
acpigen_write_name_zero() and acpigen_write_name_one() are not implemented correctly, and are not used anywhere. Drop them in favor of the more flexible acpigen_write_name_integer() function. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I116fd41624a8e8b536d18d747f21d3131b734dfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/49834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-27ACPI: Separate device_nvs_tKyösti Mälkki
Remove typedef device_nvs_t and move struct device_nvs outside of global_nvs. Also remove padding and the reserve for chromeos_acpi_t. Change-Id: I878746b1f0f9152a27dc58e373d58115e2dff22c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-31 23:07:53 +0000